Scribd
Upload
155 views1 page

Lvbs09cxswy2004c1 5sa002s

This document provides technical specifications for an 1100V, 4 core 1.5 sqmm XLPE power cable. It includes details on the conductor material and resistance, insulation type and thickness, inner and outer sheath materials and thicknesses, armour type and size, electrical parameters, temperature ratings, bending radius, tensile strength, printing and drum lengths. The cable generally conforms to BS 5467 standards.

Uploaded by

Krish
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
Download as pdf or txt
155 views1 page

Lvbs09cxswy2004c1 5sa002s

This document provides technical specifications for an 1100V, 4 core 1.5 sqmm XLPE power cable. It includes details on the conductor material and resistance, insulation type and thickness, inner and outer sheath materials and thicknesses, armour type and size, electrical parameters, temperature ratings, bending radius, tensile strength, printing and drum lengths. The cable generally conforms to BS 5467 standards.

Uploaded by

Krish
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
Download as pdf or txt
Download as pdf or txt
You are on page 1/ 1

Document ID: TE/QMS/F/02

Rev. No. : 00 Issued Date : 02/04/2018


Cable Description: 1100V, Solid Class 1 Copper Conductor, XLPE
insulated, Extruded PVC Type ST2 inner sheath, Galvanised Round
wire armour(0.9mm), Extruded PVC Type ST2 Outer sheath
Generally as per BS : 5467

I Technical Data Sheet of LT XLPE Cable CABLE SIZE


II CABLE CODE LVBS09CXSWY2004C1.5SA002S
S.No Particulars 4 Core X 1.5 Sq.mm
1 Name of Manufacturer Polycab India Ltd.
2 Type of cable 2XWY
3 Voltage Grade V 1100
4 No of cores X size in sqmm 4 Core X 1.5 Sq.mm
5 Conductor
a) Material Plain annealed Copper as per Class 1

b) Max. d.c. resistance of conductor at 20° C (ohm/km) 12.1

c) Shape of the conductor Solid Circular


6 Insulation
a) Material XLPE
b) Nominal thickness (mm) 0.7
c) Core Identification Red,Yellow, Blue & Black
7 Inner Sheath
a) Material Extruded PVC Type ST2
b) Minimum thickness (mm) 0.3
8 Armouring
a) Material Galvanised Steel
b) Type of armouring Round Wire
c) Nominal size of armour (mm) 0.9
d) Tolerance +/- 0.030
9 Outer Sheath
a) Material Extruded PVC Type ST2
b) Thickness (mm) 1.24 (Min.)
c) Colour of outer sheath. Black
10 Electrical Parameters

a) Max. a.c. resistance of conductor at 90° C (ohm/km) 15.4

b) Calculated Cable reactance (ohm/km) 0.106


c) Impedance of cable (ohm/km) 15.4
d Approx. Cable Capacitance (mfd/km) 0.16
Maximum conductor temperature under normal
11 90°C
operating conditions
Maximum conductor temperature at the termination of
12 250°C
short circuit
Short Circuit rating of conductor for the duration of 1
13 0.21
sec (kA)
14 Continuous Current carrying capacities :-
(a) In Ground at 30°C (A) 26
(b) In Air at 40°C (A) 23
15 Applicable Standard Generally as per BS : 5467
16 Approx. overall diameter of the cable in mm 12.5 +/- 2.0
17 Minimum bending radius 12 times Overall diameter
18 Max. Tensile strength
(i) for Cables pulled with stocking (Newtons) 9 x D², D is the cable OD in mm
(ii) for Cables pulled with pulling eyes (N) 300
19 Embossing POLYCAB ELECTRIC 1100 VOLTS GRADE XLPE
YEAR POLYCAB ELECTRIC 1100 VOLTS GRADE XLPE CABLE SIZE
20 Printing CABLE TYPE WITH SEQUENTIAL MARKING at every one meter
interval.
21 Standard Drum Length (Mtr.) 1000 ± 5%
22 Non- Standard Drum Length (Mtr.) Maximum 5% of order quantity

Note:-The values given above are subject to tolerances


as per the relevant standards.

You might also like