12 11 10 9 8 7 6 5 4 3 2 1

METERING PANEL G
MAIN CHECK H
H
kW, VARH kW, VARH
CL.0.2, 10VA
LINE CVT-2
CL.0.5, 30VA
NEUTRAL GROUNDING
CL.3P, COMMON CONTROL BOARD (CCB) TRANSFORMER AND RESISTOR
30VA
DMM- LINE
89L-E2
SYNCH. UNIT
89L FROM 11KV BUS PT
89L-E1 FROM LAVT-2, PT-2-1 G
COMMON CONTROL BOARD (CCB) FROM LAVT-1, PT-1-1
DMM-36.5kV FEEDER
52L LINE PROTECTION PANEL (LPP)
G
LINE NUMERICAL RELAY-1
CT-L
36.5kV FEEDER PROTECTION PANEL
LINE NUMERICAL RELAY-2
36.5kV FEEDER NUMERICAL RELAY
LINE CVT-1 CL.0.2, 10VA
F
CL.3P, 30VA
CHECK GENERATOR TRANSFORMER PROTECTION PANEL (GTPP)
ACSR CONDUCTOR GT NUMERICAL RELAY-1
kW, VARH
F
FEEDER F GT NUMERICAL RELAY-2
FROM
LOCAL GRID 38.5kV 630A, 25kA/3 Sec, Cu. BUS BAR
E
38.5kV SWITCHBOARD
38.5kV XLPE, CU 36.5kV XLPE, CU ACSR CONDUCTOR
CABLE CABLE 12/20 (24) kV (E), 2R/PhaseX1CX400
SQ.MM, CU. XLPE Ar. Cable
E
D
52GT
35 kV I/C FEEDER FROM LOCAL GRID
11kV 1600A, 25kA/1 Sec, COPPER BUS BAR
LA
D VT
52G1 52G2
C
89L-E
CT-1-3 CT-2-3
89L
CT
No part of this document may be reproduced, stored in a retrieval system, or transmitted , in any form or by any means, without prior permission. All rights
reserved in the event of the granting of a patent or the registration of a utility model or design. Offenders will be held liable for the payment of damages.

12/20 (24) kV (E), 1R/PhaseX1CX400

SQ.MM, CU. XLPE Ar. Cable
LAVT-1 52L

METERING AND PROTECTION OF UNIT-2 SHALL BE SAME AS UNIT-1.

UNIT CONTROL BOARD-1 (UCB-1)
Vertraulich, alle Rechte vorbehalten ISO 16016

12/20 (24) kV (E), 1R/PhaseX1CX400

DMM- UNIT1 SQ.MM, CU. XLPE Ar. Cable
LA
C B
UNIT GOVERNOR SYSTEM SST-1 SST-2
NOTES:-
ET LA-1
12/20 (24) kV (E), 1R/PhaseX1CX400
SQ.MM, CU. XLPE Ar. Cable
GENERATOR
Confidential, all rights reserved ISO 16016

B
GENERATOR PROTECTION PANEL-1 (GPP-1)
AVR PANEL
12/20 (24) kV (E), 1R/PhaseX1CX400
SQ.MM, CU. XLPE Ar. Cable REFER SHEET 02 OF 02 FOR 400V LTAC SYSTEM SINGLE LINE DIAGRAM
NGT-1
GENERATOR-1 NUMERICAL RELAY
CT-1-2 CT-2-2
CUSTOMER
CT-1-1 CT-2-1
SCJ JOINT STOCK COMPANY
Codeword/Unit Kennwort Refer.
Bezug
NAM LUM 2 HEP Scale of orig. Mass (Weight)
NIS NIS
(2X9MW+10%C.O.L) Maßstab im Orig.
Masse (Gewicht)
kg
A Date Datum Name Title Benennung A
Dftg.Gez. 24-07-2019 THAKURH
NGT NGT
Rev. Occur.
A REVISED FOR CT AND VT DETAILS MEHTAB THAKURH 28-09-2020 Dimensions in
Maße in
mm
Chk. Gep.
Appr.Ges.
24-07-2019
24-07-2019
MEHTAB
NEGIM
MAIN - SINGLE LINE DIAGRAM
Rev. no. Revision description (shop and eng. info only) Date: Drawn Name Appr.
Index kommt
Änd. vor Änderungs-Nr. Änderung Datum: Gez. Name Ges. Release note Dept. Abt.
Freigabevermerk
< 4000 mm ISO 2768-m Chamfers Inside innen + 1.6 mm Gen. tol. steel drop forgings EN 10243-F Drawing no. Zeichnungs-Nr. Rev. Änd. Sheet Blatt
Dim. - ISO 13715 (DIN 6784)
> 4000 mm DIN 7168-m Werkstückkanten Outside außen - 0.2 mm Gen. tol. castings Gussrohteile ISO 8062 01 OF 02
UNIT-1 UNIT-2 Geo- < 3000 mm ISO 2768-K-E Surfaces Oberflächen Ra in µm ISO 1302 Further detailed information for gen. tolerances
2E0000-0000-10052076 A Sh. Bl.
-
metr. Weitere Detailinformationen über Allgemeintol.
Fit size Passmaß Tolerance Abmaß tol. > 3000 mm DIN 7168-T Gen. tol. welding parts Schweißkonstruktionen ISO 13920-BF VN 1803 Facility Document ID: A1
12 11 10 9 8 7 6 5 4 3 2 1