Update On To Do List

Dated 26th. Feb.
‘23
To do List.
Dear Team,
Kindly follow below tasks before my visit next week. In case you need more clarification, please call.
1. Testing of Starch (Nabeel to do urgently to reformulate Plaster formulation) (Completed) Picrure

and videos share on R&D WhatsApp Group.
2. Conduct RDP test similar to starch as tabulated below. (Nabeel to do ASAP) (Completed) Picrure and
videos share on R&D WhatsApp Group.
3. RM/PM classification. (Waseem to do). Nabeel, please review below detail and suggest any other
inventory.
4. Call for Epoxy & Hardener Samples from Allied Impex, Treet Corporation and Kemipex. (Mr.
Haris/Nabeel to do) Contacts for vendors sent on Whatsapp group. (Material received)
5. Arrange Spray Plater application Machine. (Mr. Haris to do). Try getting used one from Terraco UAE.
6. Arrange 60cm Scrapper (skim coat trowel). (Waseem to do by 28th. Feb. ‘23)
https://www.ebay.co.uk/itm/371352814520
https://www.google.com/search?
q=skim+coat+trowel&tbm=isch&hl=en&rlz=1C1SQJL_enPK1038PK1039&sa=X&ved=2ahUKEwi96Kew
qLP9AhVXpicCHfCwCdUQrNwCKAB6BAgBEHI&biw=1349&bih=551#imgrc=tlxWS9ne5L_cdM
7. Reformulate Plaster. (Waseem to do by 28th. Feb. ‘23)

8. Provide 2K waterproofing formulation. (Nabeel to do ASAP) (Share on R&D WhatsApp group).
9. Formulate Epoxy grout. (Waseem to do by 28th. Feb. ‘23)
10. Arrange graded filler samples. (Waseem to do)
11. Manual application of Plaster on MDF. (Nabeel to do by 28th. Feb. ‘23) (As on telephonic
conversation with Mr.Waseem this work was hold).
12. Collecting graded filler from Khaka and other extenders. (Nabeel to do) (Arranged)
13. Compile test results for last week tests. (Nabeel to do) (Hardness test done with hammer and
chisel).
14. Generate BOM for next week sample production ASAP. (Waseem to do)
Method for testing Starch:
Prepare 10% starch solution in water to test consistency (Viscosity) and gel strength.
Procedure:
Take 180 ml water in a beaker. Add 20 gms. Starch sample (pre-wet with Kerosene Oil) and
stir till power is dissolved to Water clear solution. After complete dissolution leave solution
for 10-15 min and note down viscosity and gel strength.
(1) Opagel FP 6
(2) Opagel CMT
(3) Casucol 301
Opagel FP 6 Opagel CMT Casucol 301 Local Starch

Dissolution in water Complete Complete Complete Incomplete
Viscosity Thick Thick Thick N/A
Gel Flow able Flow able Flow able N/A
Clarity Clear Clear Clear N/A
Kindly prepare 15% or 20% solution, in case 10% results are not measurable.
Method for testing RDP 5008 (Jinshan):
1. Prepare 10% RDP solution & 50% RDP Solution in water to test consistency (Viscosity), gel strength
and Elastic film formation.
RDP 5008
Dissolution in Complete
water
Viscosity Thick
Elasticity Partially Elastic
Film Thickness Less smooth & Glossy
QC Plaster WA-01 Plaster WA-02 STD Sample

Water to Admixture Ratio
Wet Plaster Thickness (mm) 12 12 12
Application result Creamy Creamy Thick Paste
Open time 02:30 Hrs. 02:30 Hrs. 00:45 Hr.
Full hardness time Perfect Adhesion Good Poor , Brittle
better than WA- Adhesion wall Adhesion
02
Smoothness Poor Poor OK
Wet Adhesion Excellent Excellent Poor & dripping
Sagging No Sagging No Sagging No Sagging
Cracking No cracks No cracks No cracks
observed observed observed
Shrinkage No No No
Adhesion Perfect Perfect Perfect
Impact Test Not Tested Not Tested Not Tested
Cement Sand ratio (Rounded 1:5.957 1:5.957 1:4.533
Manually)
Classification Inventories:
(1) Raw-Materials:
River Sand
Silica Sand
OPC
White Cement
Calcite (Calcium Carbonate, CaCO3)

CaCO₃ 10-16 Mesh.
CaCO₃ 30-50 Mesh.
CaCO₃ 50-80 Mesh.
CaCO₃ 100 Mesh
CaCO₃ 80-200 Mesh.
CaCO₃ 200 Mesh.
CaCO₃ 1000 Mesh.
CaCO₃ 2500 Mesh (5µ)
Lime Stone (CaO)
Gypsum
RDP
Starch
Air Entraining Agent
Super Plasticizer
PVA
PVAc
SBR Emulsion
Elastomeric Styrene Acrylic Emulsion
Styrene Acrylic Emulsion
Pure Acrylic Emulsion
Wetting Agent
Dispersing Agent
HEC
CMC
HPMC
Cellulose Ether
Epoxy Resin Solution.
Epoxy Resin Solvent Free
Polyamide Resin
Polyamine Resin
Iron Oxide Red (Natural)
Iron Oxide Red (Synthetic)
Iron Oxide Yellow (Natural)
Iron Oxide Yellow (Synthetic)
Bentone (Water Based)
pH Controlling Agent
Water Repellent (Aqueous System)
Water
(2) Packing Materials:
 Craft Valve bag for Spray Plaster 50 Kgs.

 Craft Valve bag for Tile Bond 25 Kgs.
 Craft Valve bag for Brick Joint 50 Kgs.
 Craft Valve bag for Elastoseal 50 Kgs.
 Plastic Jerrycan 5 Kgs.
 Plastic Bottle Grout 1 Kgs.


Update On To Do List

Uploaded by

Update On To Do List

Uploaded by

Dated 26th. Feb.

1. Testing of Starch (Nabeel to do urgently to reformulate Plaster formulation) (Completed) Picrure

7. Reformulate Plaster. (Waseem to do by 28th. Feb. ‘23)

Method for testing Starch:

Opagel FP 6 Opagel CMT Casucol 301 Local Starch

Method for testing RDP 5008 (Jinshan):

QC Plaster WA-01 Plaster WA-02 STD Sample

Calcite (Calcium Carbonate, CaCO3)

CaCO₃ 30-50 Mesh.

CaCO₃ 50-80 Mesh.

CaCO₃ 100 Mesh

CaCO₃ 80-200 Mesh.

CaCO₃ 40-200 Mesh.

CaCO₃ 200 Mesh.

CaCO₃ 600-650 Mesh.

CaCO₃ 1000 Mesh.

CaCO₃ 2500 Mesh (5µ)

Lime Stone (CaO)

Air Entraining Agent

Elastomeric Styrene Acrylic Emulsion

Styrene Acrylic Emulsion

Pure Acrylic Emulsion

Epoxy Resin Solution.

Epoxy Resin Solvent Free

Iron Oxide Red (Natural)

Iron Oxide Red (Synthetic)

Iron Oxide Yellow (Natural)

Iron Oxide Yellow (Synthetic)

Bentone (Water Based)

Water Repellent (Aqueous System)

(2) Packing Materials:

 Craft Valve bag for Spray Plaster 50 Kgs.

You might also like