Scribd
Upload
173 views2 pages

Assignment For Optical Communications

The document is an assignment for an optics and optical communication course that contains 5 questions about fiber optic communication principles and applications. It also contains 5 problems related to fiber optic systems design and analysis. Students are asked to provide short answers to the questions and solve the problems, showing the necessary work. The questions cover topics like waveguide operation, fiber attenuation and dispersion, stimulated and spontaneous emission, LEDs vs lasers, and laser beam properties. The problems involve calculations related to fiber parameters, wavelength and speed in a fiber, pulse spreading, photodiode receiver noise, and a fiber link power budget.

Uploaded by

Fraol Endale
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
Download as pdf or txt
173 views2 pages

Assignment For Optical Communications

The document is an assignment for an optics and optical communication course that contains 5 questions about fiber optic communication principles and applications. It also contains 5 problems related to fiber optic systems design and analysis. Students are asked to provide short answers to the questions and solve the problems, showing the necessary work. The questions cover topics like waveguide operation, fiber attenuation and dispersion, stimulated and spontaneous emission, LEDs vs lasers, and laser beam properties. The problems involve calculations related to fiber parameters, wavelength and speed in a fiber, pulse spreading, photodiode receiver noise, and a fiber link power budget.

Uploaded by

Fraol Endale
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
Download as pdf or txt
Download as pdf or txt
You are on page 1/ 2

Adama Science and Technology University

School of Electrical Engineering and computing


Department of Electronics and Communication Engineering
Course Title: Optics and Optical Communication
Course Code: ECE 5302
Assignment III of optics and Fiber Optic Communications (15%)
Academic Year: 2022/ Semester: II
Give short and brief answer for the following questions. (5%)

1. Explain the general operating principle of the waveguide in fiber optic


communication systems.
2. List the most important sources of attenuation and all types of dispersion in
optical fibers. Please provide their definitions.
3. Write at least two similarities and differences between spontaneous and
stimulated emissions processes.
4. Differentiate between light emitting diodes and Laser diodes.
5. Write the four unique properties of laser beams and explain each of them by
supporting with suitable pictures.

Work out the following problems and show all the necessary (10%)

1. A silica optical fiber with a core diameter large enough to be considered by


ray theory analysis has a core refractive index of 1.50 and a cladding refractive
index of 1.47. Determine: (a) the critical angle at the core–cladding interface;
(b) the NA for the fiber; (c) the acceptance angle in air for the fiber.
2. A laser diode emits light at a wavelength of 1.55µm. The light is coupled in
an optical fiber. Calculate the wavelength, the speed and the frequency of the
light in the optical fiber, which has a refractive index of 1.45.

1
3. What is the pulse spreading when a laser diode having a 2 nm spectral width
is used? Find the material-dispersion-induced pulse spreading at 1550 nm for
an LED with a 75 nm spectral width.
4. An InGaAs PIN photodiode has the following parameters at a wavelength of
1300 nm: ID = 4 nA, η = 0.9, RL = 1000 Ω and the surface leakage current is
negligible. The incident optical power is 300 nW (- 35 dBm) the receiver
bandwidth is 20 MHz. Find the various noise terms of the receiver.
5. A transmitter has an output power of 0.1 mW. It is used with a fiber having
NA = 0.25, attenuation of 6 dB/km and length 0.5 km. The link contains two
connectors of 2 dB average loss. The receiver has a minimum acceptable
power (sensitivity) of – 35 dBm. The designer has allowed a 4 dB margin.
Calculate the link power budget.

You might also like