Tle Eim10 Q4 M3
Tle Eim10 Q4 M3
Technology and
Livelihood Education 10
Quarter Electrical Installation and
4
Maintenance
TLE-EIM10Q4M3page2
Republic Act 8293, Section 176 states that no copyright shall subsist in any
work of the Government of the Philippines. However, prior approval of the
government agency or office wherein the work is created shall be necessary for
exploitation of such work for profit. Such agency or office may, among other things,
impose as a condition the payment of royalties.
Technology and
Livelihood Education 10
Quarter 4
Self-Learning Module 3
Electrical Materials used in House Wiring
TLE-EIM10Q4M3page4
Introductory Message
This learning material hopes to engage the learners in guided and independent
learning activities at their own pace and time. Further, this also aims to help learners
acquire the needed 21st century skills especially the 5 Cs, namely: Communication,
Collaboration, Creativity, Critical Thinking, and Character while taking into
consideration their needs and circumstances.
In addition to the material in the main text, you will also see this box in the
body of the module:
As a facilitator you are expected to orient the learners on how to use this
module. You also need to keep track of the learners' progress while allowing them to
manage their own learning. Moreover, you are expected to encourage and assist the
learners as they do the tasks included in the module.
TLE-EIM10Q4M3page5
This module was designed to provide you with fun and meaningful
opportunities for guided and independent learning at your own pace and time. You
will be enabled to process the contents of the learning material while being an active
learner.
Posttest - This measures how much you have learned from the
entire module.
TLE-EIM10Q4M3page6
EXPECTATIONS
At the end of the learning period, the students should be able to:
PRETEST
Multiple Choice
Directions: Read and understand the statement carefully. Write the letter that
best describes the statement. Write your answer in your quiz notebook.
1. Darrel wants to make an extension cord. Which of the following materials can he use
to make a convenient outlet.
A. conventional outlet C. male plug
B. lamp holder D. switch
2. Jomel was asked by his teacher to check the extension cord. Which of the following
parts of the extension wire can he check if a device is inserted to a convenience outlet
to conduct electrical current?
A. conventional outlet C. male plug
B. lamp holder D. switch
3. Jericko is in TLE class. His teacher is asking him to check the bulb because it is not
functioning. Which of the following parts of the circuit can he check that hold and
protects the lamp?
A. conventional outlet C. male plug
B. lamp holder D. switch
4. Jan wants to turn on the light on his bedroom. Which of the following device can he
touch to connect and disconnect the flow of electrical current in a circuit?
A. conventional outlet C. male plug
B. lamp holder D. switch
5. Duane is an electrical engineer. He noticed that the breaker is not functioning. Which
of the following electrical materials can he check if a circuit protective device that
automatically blows and cuts the current when overload or short circuit happens,
A. circuit breaker C. junction box
B. fuse D. utility box
TLE-EIM10Q4M3page7
RECAP
Directions: Fill in the blanks with the correct answer choose your answer from the
list below.
LESSON
Conductor
Conduit
Junction Box
Utility Box
Convenience outlet
Switch
Electrical wiring is the electrical power distribution through the wires in a perfect manner
for economic use of wiring conductors inside a room or building with better load
control. Electrical wiring system is classified into five categories: Cleat wiring.
Casing wiring. ... Concealed wiring.
A basic principle of electrical wiring is that switches should always be wired into the hot
(black or red) line leading directly to a device or outlet. When switches in the hot line are
turned off, no hot line power is present in the load device.
An electric circuit includes a device that gives energy to the charged particles constituting
the current, such as a battery or a generator; devices that use current, such as lamps,
electric motors, or computers; and the connecting wires or transmission lines.
The most common sizes you will find in residential work are 14-gauge and 12-gauge. Larger
appliances such as electric stoves, electric water heaters, electric dryers and central air units
will often use 10-, 8- or even 6-gauge wire. If you are adding an outlet, you need to use wire
the same gauge as the existing wiring.
TLE-EIM10Q4M3page9
ACTIVITIES
Electrical Materials
Directions: Based on the given electrical Plan list down the materials needed
WRAP-UP
___________________________________________________________________________
__________________________________________________________________________________
__________________________________________________________________________________
VALUING
Directions:
Choose an electrical materials and report to the class your background and
information about the materials and the manufacturer. Also, demonstrate how to
properly handle, use, and take care of your materials.
__________________________________________________________________________________
__________________________________________________________________________________
__________________________________________________________________________________
__________________________________________________________________________________
TLE-EIM10Q4M3page10
POSTTEST
Multiple Choice
Directions: Read and understand the statement carefully. Write the letter that best
describes the statement. Write your answer in your quiz notebook.
1. Rey is making his assignment in his TLE subject. Unfortunately, the power or current
is automatically shut down or cut, what device is in trouble when short circuit or
overload occurs?
A. circuit breaker C. junction box
B. fuse D. utility box
2. Roy wants to add another lamp in his house. Which of the following materials can he
used to add if it is an octagonal shape where the connections or joints of the wires are
being done?
A. circuit breaker C. junction box
B. fuse D. utility box
3. Ren was asked by his supervisor to add additional convenience outlet and switch.
Which of the following electrical material can he use to add if it is metallic or plastic
rectangular shape?
A. circuit breaker C. junction box
B. fuse D. utility box
4. Kevin’s project is an extension cord. What material can he use to make extension cord
assembly if it comes in a roll of 150 meters and size gauge # is 18 or 16 American
wire gauge(AWG)?
A. flat cord wire C. solid wire
B. single cord wire D. stranded wire
5. Paul’s task is adding additional outlet at his room. Which wire can he use to add if it
is made of multiple strands to make a single wire?
A. flat cord wire C. solid wire
B. single cord wire D. stranded wire
TLE-EIM10Q4M3page11
KEY TO CORRECTION
D 5. Technology 5. A 5.
A 4. Malfunction 4. D 4.
D 3. Performance 3. B 3.
C 2. Vibration 2. C 2.
B 1. Observation 1. A 1.
References
BOOKS