Bioreactor

Bioreactor
Definition:
A bioreactor is a type of fermentation vessel that is used for the production of
various chemicals and biological reactions. It is a closed container with adequate
arrangement for aeration, agitation, temperature and pH control, and drain or
overflow vent to remove the waste biomass of cultured microorganisms along with
their products.
A bioreactor should provide for the following:

1. Agitation (for mixing of cells and medium),
2. Aeration (aerobic fermentors); for O2 supply,
3. Regulation of factors like temperature, pH, pressure, aeration, nutrient
feeding, and liquid leveled.
4. Sterilization and maintenance of sterility, and
5. Withdrawal of cells/medium
Bioreactor Design
 The design and mode of operation of a bioreactor are based on the production of
an organism, optimum conditions required for desired product formation, product
value, and its scale of production.
 A good bioreactor design will help to improve productivity and provide higher
quality products at lower prices.
 A bioreactor is a device that consists of various features such as an agitator
system, an oxygen delivery system, a foam control system, and a variety of other
systems such as temperature & pH control system, sampling ports, cleaning, and
sterilization system, and lines for charging & emptying the reactor.
Properties of Bioreactor
 The material used for the construction of a bioreactor must have the following
important properties:
 It should not be corrosive.
 It should not add any toxic substances to the fermentation media.
 It should tolerate the steam sterilization process.
 It should be able to tolerate high pressure and resist pH changes.
Types of Bioreactor
Continuous stirred tank fermentor
 A continuous stirred tank bioreactor is made up of a cylindrical vessel with a
central shaft controlled by a motor that supports one or more agitators
(impellers).
 A stirred tank bioreactor can be operated continuously in the fermentor,
temperature control is effortless, construction is
cheap, easy to operate, resulting in low labor cost, and it is easy to clean.
 It is the most common type of bioreactor used in industry.
Airlift fermentor
 The airlift reactor is generally used for gas-liquid or gas-liquid-solid contact
devices. It is also known as a tower reactor.
 A bioreactor using an airlift system divides the fluid volume into two zones
to improve circulation, oxygen transfer, and equalize forces in the reactor.
 This equipment has several advantages such as its simplicity of design
because it doesn’t contain any moving parts or agitators, its easy
sterilization, its low energy requirements, and its low cost.
Bubble column fermentor
 The base of the column air or gas is introduced via perforated pipes or plates, or
metal micro porous sparger.
 These reactors are simple in construction, easy maintenance, and have a low
operating cost
 Bubble columns reactors are used in biochemical processes such as
fermentation and biological wastewater treatment. It is also used in many
chemical, petrochemical, and biochemical industries.
Packed bed fermentor
 A packed bed fermentor is a bed of solid particles, having biocatalyst on or
within, the matrix of solids.
 Frequently used in chemical processing processes such as absorption,
distillation, stripping, separation process, and catalytic reactions, packed bed
reactors are also called fixed bed reactors.
 This reactor has many benefits, like a high conversion rate for the catalyst,
ease of operation, low construction and operation costs, increased contact
between reactant and catalyst, and the ability to work in high temperatures
and pressures.
Photobioreactor
 A photobioreactor is a specialized unit for fermentation that is either illuminated
by direct sunlight or artificially illuminated
 They are made up of glass or more commonly transparent plastic and the tubes or
flat panels is consist of light receiving systems.
 In this bioreactor, centrifugal pumps or airlift pumps can be used to circulate
the medium through solar receivers.
 Photo-bioreactors are usually operated in a continuous mode at a
temperature in the range of 25–40 °C.
 Photobioreactors are used for the photosynthetic culture of microalgae and
cyanobacteria to produce products such as astaxanthin and β-carotene.

Bioreactor

Uploaded by

Bioreactor

Uploaded by

Bioreactor

A bioreactor should provide for the following:

You might also like