Computer Systems Servicing 1

COURSE OVERVIEW

The Computer Systems Servicing deals with different learning activities to acquire different
competencies. This course will introduce different learning activities preparing grade 11 students to take
the cast into the world of business as computer systems service provider and feel more confident as they
provide services needed.

COURSE OUTCOMES
At the end of the course, the students should be able to:

Cognitive
1. Explain the business concepts of computer systems
2. Explore the career opportunities in computer servicing
Psychomotor
1. Apply Quality standards in computer systems servicing.
2. Practice occupational health and safety in computer systems servicing.
3. Perform computer operations based on a given task.
4. Use hand tools and equipment for computer systems servicing.
Affective
1. Actively participates and demonstrates interest in computer services in the world of business.
2. Compare and contrast the different field adapting and not adapting technology innovation.

Module 1: Basic Concepts in Computer Systems Servicing

Understanding the Computer Systems

Learning Outcomes:
At the end of the lesson, the students are able to:
• identify the important components of a PC and their functions
• distinguish the different hardware tools
✓ SELF-CHECK ACTIVITIES:
You will be challenged to dig deeper into your prior knowledge and previous experiences about
computer hardware servicing. This Phase will guide you in assessing yourself by answering
questions and many other types of evaluation for you to further explore the basics of computer
hardware servicing.

Direction: Listed below are some of the most important skills that you must gain in order to render
quality service when you enter the real world of Computer Hardware Servicing. Read the skills carefully.

1
Then write “Not much”, if you are not really familiar, “A little” and “A lot”, if you are familiar with the
skill. Feel free to answer each skill. Write your answers in your notebook.

Skills in Computer Hardware Servicing Not Much A little A lot

I can open a computer case.
I can connect the mouse.
I can connect the keyboard.
I can connect the monitor.
I know how to use the Philip head screw driver.
I know how to use the anti- static wrist strap.
I know how to use the lint free cloth.
I can apply occupational health and safety precautions while
working.
I can remove the system fan.
I can detach the power supply from the system unit.
I know how to remove the RAM from the motherboard.
I can remove the hard drive from the system unit.
I can install the power supply.
I know how to install the motherboard.
I can install the internal drives in a system unit.
I know how to attach RAM in the memory socket.
I can install CD / DVD drives.

DISCUSSIONS
Introduction
In this lesson, the learner will learn about computers, important components and their functions.
To start with this lesson, let us first understand computer systems.
Computers can be defined as an electronic device designed to manipulate data so that useful
information can be generated. However, computers will not run on its own. Computer system is a
collection of entities that are designed to receive, process, manage and present information in a
meaningful format. Computer system have different components and these are:
a. Hardware- the physical, touchable, electronic and mechanical parts of a computer system.
b. Software- is the set of instructions (also called a program) that guides the hardware to operate
effectively.
c. User- refers to people involved in the data processing operations such as the system
administrator, office workers, students and others
2
ACTIVITY 1.1 – IDENTIFYING THE IMAGE
(See activity sheet 1.1)
As an aspiring computer technician, it is very important to know the different components of a
computer system. These are the hardware, software and peopleware. Each component plays an important
role, without each other computer systems will not work properly.

A. Major hardware components of a computer system

The following list represents a basic set of hardware found in most PCs.

1. System Unit- The main part of a microcomputer, sometimes called the chassis. It includes the
following parts: Motherboard, Microprocessor, Memory Chips, Buses, Ports, Expansion Slots and Cards

2. Motherboard / Mainboard / System Board- The main circuit board of a computer. It contains all
the circuits and components that run the computer.

3
3. CPU (Central Processing Unit) - The processor is the main “brain” or “heart” of a computer system.
It performs all of the instructions and calculations that are needed and manages the flow of information
through a computer.

4. Primary storage- (internal storage, main memory or memory) is the computer's working storage
space that holds data, instructions for processing and processed data (information) waiting to be sent to
secondary storage. Physically, primary storage is a collection of RAM chips.

Two (2) Types of Memory

a. ROM – (Read Only Memory) ROM is non-volatile, meaning it holds data even when the power
is ON or OFF.

b. RAM – (Random Access Memory) RAM is volatile, meaning it holds data only when the power
is on. When the power is off, RAM's contents are lost.

4
 Examples of RAM

5. Expansion Bus - A bus is a data pathway between several hardware components inside or outside a
computer. It does not only connect the parts of the CPU to each other, but also links the CPU with other
important hardware.

5
6. Adapters- Printed-circuit boards (also called interface cards) that enable the computer to use a
peripheral device for which it does not have the necessary connections or circuit boards. They are often
used to permit upgrading to a new different hardware.

7. Power Supply Unit (PSU) - Installed in the back corner of the PC case, next to the motherboard. It
converts 120vac (standard house power) into DC voltages that are used by other components in the PC.

6
8. Hard Disk Drive (HDD) - Also known as hard drive, is a magnetic storage device that is installed
inside the computer. The hard drive is used as permanent storage for data. In a Windows computer, the
hard drive is usually configured as the C: drive and contains the operating system and applications.

9. Optical Drive- An optical drive is a storage device that uses lasers to read data on the optical media.
There are three types of optical drives: Compact Disc (CD), Digital Versatile Disc (DVD) and Blu-ray
Disc (BD).

Figure 9. CD ROM

10. Digital Versatile Disc (DVD) - Designed to optically access data stored on a DVD. A laser moves
back and forth near the disk surface and accesses data at a very fast rate.

Figure 10. CD ROM

B. Input Devices - Accepts data and instructions from the user or from another computer system.

7
 Two (2) Types of Input Devices

1. Keyboard Entry – Data is inputted to the computer through a keyboard.

Keyboard - The first input device developed for the PC. Data is transferred to the PC over a
short cable with a circular 6-pin Mini-din connector that plugs into the back of the motherboard.

2. Direct Entry – A form of input that does not require data to be keyed by someone sitting at a
keyboard. Direct-entry devices create machine-readable data on paper, or magnetic media, or feed it
directly into the computer’s CPU.

Three Categories of Direct Entry Devices

1. Pointing Devices - An input device used to move the pointer (cursor) on screen.

• Mouse - The most common 'pointing device' used in PCs. Every mouse has two buttons and most
have one or two scroll wheels.

8
• Touch screen- A display screen that is sensitive to the touch of a finger or stylus. Used in myriad
applications, including ATM machines, retail point-of-sale terminals, car navigation and industrial
controls. The touch screen became wildly popular for smart phones and tablets.

• Light Pen - A light-sensitive stylus wired to a video terminal used to draw pictures or select menu
options. The user brings the pen to the desired point on screen and presses the pen button to make
contact.

• Digitizer Tablet - A graphics drawing tablet used for sketching new images or tracing old ones.
Also called a "graphics tablet," the user contacts the surface of the device with a wired or wireless
pen or puck. Often mistakenly called a mouse, the puck is officially the "tablet cursor."

9
2. Scanning Devices- A device that can read text or illustrations printed on paper and translates the
information into a form the computer can use.

Image scanner

Bar Code Reader

3. Voice- Input Devices - Audio input devices also known as speech or voice recognition systems that
allow a user to send audio signals to a computer for processing, recording, or carrying out commands.
Audio input devices such as microphones allow users to speak to the computer in order to record a voice
message or navigate software.

C. Output Devices - Any piece of computer hardware that displays results after the computer has
processed the input data that has been entered.

10
1. Computer Display Monitor- It displays information in visual form, using text and graphics. The
portion of the monitor that displays the information is called the screen or video display terminal.

Types of Monitor

a. CRT Monitors - Cathode Ray Tubes (CRT) were the only type of displays for use with desktop
PCs. They are relatively big (14" to 16" deep) and heavy (over 15 lbs).

b. LCD Monitors - Liquid Crystal Display (LCD) technology has been used in laptops for some time.
It has recently been made commercially available as monitors for desktop PCs.

11
c. LED Monitors (Light Emitting Diode) - A display and lighting technology used in almost every
electrical and electronic product on the market, from a tiny on/off light to digital readouts,
flashlights, traffic lights and perimeter lighting.

2. LCD Projectors- utilize two sheets of polarizing material with

a liquid crystal solution between them. An electric current
passed through the liquid causes the crystals to align so that light
cannot pass through them. Each crystal, therefore, is like a
shutter, either allowing light to pass through or blocking the
light.

3. Smart Board - A type of display screen that has a touch

sensitive transparent panel covering the screen, which is similar to a touch screen.

4. Printer - A device that prints text or illustrations on paper.

12
 Types of printer

• Ink-Jet or Bubble-Jet Printer - bprays ink at a sheet of paper.

Ink-jet printers produce high-quality text and graphics.

• Laser Printer - Uses the same technology as copy machines.

Laser printers produce very high quality text and graphics.

• LCD and LED Printer- Similar to

a laser printer, but uses liquid crystals
or light-emitting diodes rather than a laser to produce an image on the
drum.

• Line Printer - Contains a chain of characters or pins that print an entire

line at one time. Line printers are very fast, but produce low-quality print.

• Thermal Printer- An inexpensive printer that works by pushing heated pins against heat-sensitive
paper. Thermal printers are widely used in calculators and fax machines.

5. Speakers - Used to play sound. They may be built into the system unit or connected with cables.
Speakers allow you to listen to music and hear sound effects from your computer.

D. Ports - External connecting sockets on the outside of the computer. This is a pathway into and out
of the computer. A port lets users plug in outside peripherals, such as monitors, scanners and printers

13
 Type of Port Function Illustration
Serial Port Intended for serial type mouse
and older camera

Parallel Port Also called as printer port.

This is only for old model
printer. It has 25 pins. It is a
female port.
VGA (Video Graphic Used to connect monitors. It
Array) Port has 15 pins and it is a female
port.

USB (Universal Serial High speed serial interface that

Bus) Port is used with almost all devices.
It is used to connect latest
model printers, pen drives, cell
phones etc. it has 4 pins.

PS/2 Port Simple, 6-pin, low-speed serial

connections commonly
dedicated to a keyboard and
mouse.

Power Port Intended for power cord.

Type of Port Function Illustration

S-Video Port S-Video connections are
available on certain source
components and video display
devices, and offer a higher
level of video performance
over composite video signals.

14
 Audio Port Intended for plugging in the
speaker or headset.

LAN (Local Area A physical interface often used

Networking) Port for terminating twisted pair
type cables used to connect
computers onto a local-area
networks (LAN), especially
Ethernet RJ-45 connectors

E. Cables and Wires- A cable is most often two or more wires running side by side and bonded,
twisted or braided together to form a single assembly, but can also refer to a heavy strong rope.

Table 2. The Cables and Connectors

15
Illustration Function
These jacks are intended for the PS/2 port
specifically for PS/2 type of keyboard and mouse.

This type of jack is intended for the audio and

microphone port.

Illustration Function
S-video jack is obviously for S-Video port

This monitor jack is intended for the VGA (Video

Graphic Array) port

This USB (Universal Serial Bus) plug is intended

for USB port. Modern or new model of peripherals
like printer, camera, scanners and even other
portable computer attachments used USB type of
plugs.

This printer cable jack is intended for the parallel

port.

16
 RJ45 ("RJ" in RJ45 stands for "registered jack,"
since it is a standardized networking interface and
the "45" simply refers to the number of the
interface standard) is a type of connector
commonly used for Ethernet networking.

Illustration Function

Power cord is the most important cord because it

connects the computer to the main source of
electricity to make it functional.

1.2 Software is the set of instructions (also called a program) that guides the hardware to operate
effectively. Software can be split into two main types:

1. System Software – Any software required to support the production or execution of application
programs, but which is not specific to any particular application. Common operating systems include
Windows, the Macintosh OS, OS/2 and UNIX.

LINUX
MAC

WINDOWS

2. Application Software – Designed to help the user to perform singular or multiple related tasks.
Examples of application software are as follows:

a. Word processing software - Creates, edits, saves, and prints documents. Example: MS Word,
WordPerfect, Ami Pro, MacWrite.

17
 b. Spreadsheet software - An electronic spreadsheet consisting of rows and columns is used to
present and analyze data. Example: MS Excel, Lotus 123, Quattro Pro.

c. Database management software - Used to structure a database, a large collection of computer

programs. Data is organized as fields and records for easy retrieval. Example: MS Access, dBase,
Fox Pro, Oracle.

d. Graphic software - Graphics programs display results of data manipulation for easier analysis and
presentation. Example: Macromedia Flash, Harvard Graphics, 3D Studio Max, Adobe Photoshop

1.3 Users- Refers to people involved in the data processing

operations such as the system administrator, office workers,
students and others.

Activity 1.2

Draw and label the different hardware of a computer. After drawing and labeling the hardware
components, group them into Input Devices, Output Devices and Storage Devices.
(See Activity Sheet 1.2)

Module Recap
• Computer system is a collection of entities that are designed to receive, process, manage and
present information in a meaningful format.
• Computer system has three major components: hardware, software, and user.
• Hardware is the physical, touchable, electronic and mechanical parts of a computer system.
• Software is the set of instructions (also called a program) that guides the hardware to operate
effectively.
• User refers to people involved in the data processing operations such as the system administrator,
office workers, students and others

Express your ideas

Based on the discussion, explain the following items below. Submit your answers using MS Word on
our Neo Portal and upload it on our scheduled Assignment-Express your ideas no. 1.

• Differentiate input and output devices.

• Which is more important software or hardware?
• If you were given the opportunity to own a business that relates to Computer Hardware
Servicing, do you think you will be confident to manage it? Explain your answer.

18
 Module Assessment
• Log-in to your NEO Portal using your login credentials.
• Online assessment will be announced via the learning management system calendar.

Learner’s Feedback Form

Instructions: To further improve the online class learning experience. Please answer the following items as honestly
as possible.
1. How do you feel about the topic or content presented in the module?
[ ] I completely understood the topic or content presented in the module.
[ ] I almost understood the topic or content presented in the module.
[ ] I had trouble understanding the topic or content presented in the module.

In what particular part of the module, you had trouble understanding?

_______________________________________________________________________________________________________________
_______________________________________________________________________________________________________________
_______________________________________________________________________________________________________________
_______________________________________________________________________________________________________________
_______________________________________________________________________________________________________________

2. The module is well organized and very comprehensive.

[ ] 5 – Strongly Agree
[ ] 4 - Agree
[ ] 3 - Neutral
[ ] 2 - Disagree
[ ] 1 - Strongly Disagree

3. I understand what I need to do for my assessment(s) in the module.

[ ] 5 – Strongly Agree
[ ] 4 - Agree
[ ] 3 - Neutral
[ ] 2 - Disagree
[ ] 1 - Strongly Disagree

4. I am satisfied with the module.

[ ] 5 – Strongly Agree
[ ] 4 - Agree
[ ] 3 - Neutral
[ ] 2 - Disagree
[ ] 1 - Strongly Disagree

5. The supplemental learning materials or content was included in the module. Please check the corresponding
materials provided.
[ ] Images/Pictures
[ ] You Tube Videos
[ ] Video Demonstrations
[ ] Alternative Learning Tools
[ ] Others: ______________________________________

6. What other concerns or problems you had experienced understanding and learning from the module?
_______________________________________________________________________________________________________________
_______________________________________________________________________________________________________________
19
 _______________________________________________________________________________________________________________
_______________________________________________________________________________________________________________
_______________________________________________________________________________________________________________

References
Misty E. Vermaat(2015), Introduction to Computer Fundamentals and Information Technology
Retrieved July 5,2020
DepedBataan(2017), Computer System Servicing, Retrieved July 5,2020 from
http://www.depedbataan.com/resources/9/k_to_12_pc_hardware_servicing_learning_module.pdf

20