Scribd
Upload
263 views2 pages

Mercedes Sprinter Ezs From 2006

This document provides instructions for connecting a diagnostic cable to a Mercedes-Benz Sprinter EZS module from 2006. The instructions state to use a C45 + A6 adapter cable, carefully remove the EZS module from the vehicle, and then remove the back plastic cover to locate solder points on the board. Photos show versions 1-3 and where to solder the cable leads for each version.

Uploaded by

Abrahan Martìnez
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
Download as pdf or txt
263 views2 pages

Mercedes Sprinter Ezs From 2006

This document provides instructions for connecting a diagnostic cable to a Mercedes-Benz Sprinter EZS module from 2006. The instructions state to use a C45 + A6 adapter cable, carefully remove the EZS module from the vehicle, and then remove the back plastic cover to locate solder points on the board. Photos show versions 1-3 and where to solder the cable leads for each version.

Uploaded by

Abrahan Martìnez
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
Download as pdf or txt
Download as pdf or txt
You are on page 1/ 2

MERCEDESBENZ SPRINTER EZS FROM 2006

USE CABLE C45 + A6 ADAPTER. REMOVE MODULE FROM CAR CAREFULLY:

LOCATION

NOW REMOVE BACK PLASTIC COVER FROM EZS, AND LOCATE POINTS ON THE BOARD
CHECKING PHOTOS BELOWS AND SOLDER CABLE LEADS AS IT SHOWS TO US:

VERSION 1:
VERSION 2:

VERSION 3:

You might also like