DCPA701

INSTALLATION/OWNER’S MANUAL
Media Receiver with Android Auto™ and CarPlay™
featuring a 7" digital TFT Display
Safety Notes

Video playback will not operate while the vehicle is moving.

This is a safety feature to prevent driver distraction. In-dash video functions will only
operate when vehicle is in Park and the parking brake is engaged. It is illegal in most
jurisdictions for the driver to view video while the vehicle is in motion.

The SAFETY NOTICE is reminder to drive responsibly and safely while using your mobile phone device, or any APP’s that are
compatible with this unit.

It is highly recommended that your DUAL DCPA701 is installed by a professional installer or an authorized dealer.

This product is only for use in vehicles with 12VDC negative ground only.

To prevent damage or injury:

• Make sure to ground the unit securely to the vehicle chassis ground.
• Do not remove the top or bottom covers of the unit.
• Do not install the unit in a spot exposed to direct sunlight or excessive heat or th possibility of water splashing.
• Do not subject the unit to excessive shock.
• When replacing a fuse, only use a new one with the correct rating. Using a fuse wit the wrong rating may cause the unit to
malfunction.
• To prevent short circuits when replacing a fuse, disconnect the wiring harness first.
• Use only the provided hardware and wire harness.
• If you experience problems during installation, consult your nearest DUAL deale .
• If the unit malfunctions, reset the unit as described. If the problem still persists consult your nearest DUAL dealer or call tech
assistance @ 1-866-382-5476.
• To clean the monitor, wipe only with a dry silicone cloth or soft cloth. Do not usea stiff cloth, or solvents such as paint thinner
and alcohol. They can scratch the surface of the panel and/or remove the printing.
• When the temperature of the unit falls (as in winter), the liquid crystal inside th screen will become darker than usual. Normal
brightness will return after the unit is in use for a while.
• When extending the ignition, battery or ground wiring, make sure to us automotive-grade wiring with an a minimum AWG 16 or
more to prevent voltage drops.
• Do not touch the liquid crystal fluid if the LCD is damaged or broken. The liqui crystal fluid may be hazardous to your health or
fatal. If the liquid crystal fluid from the LCD contacts your body or clothing, wash it off with soap immediately.

Copyright Notes
This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology
must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise
authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc.

Use of the Apple CarPlay logo means that a verhicle user interface meets Apple performance standards. Apple is not responsible
for the operation of this vehicle or its compliance with safety and regulatory standards. Please note that use of this product with
iPhone, iPod or iPad may affect wireless performance. Apple CarPlay is a trademark of Apple Inc. "Made for iPod" and "Made for
iPhone" mean that an electronic accessory has been designed to connect specifically to iPod or iPhone, respectively, and has been
certified by the developer to meet Apple performance standards. iPhone and iPod are trademarks of Apple, Inc., registered in the
U.S. and other countries.

Availability of Android Auto™ may vary depending upon your country and phone model. Please visit android.com/auto for more
information. Android, Android Auto, Google and other marks are trademarks of Google Inc.

Other trademarks and trade names are those of their respective owners.
 DCPA701

Table of Contents Page

Warning Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

FCC Compliance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Preparation/Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Wiring Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Control Locations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

General Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-9

Audio Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

AM/FM Tuner Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

USB Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Media Compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-14

Bluetooth Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-16

Apple CarPlay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . 17-18

Android Auto . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19-20

Auxiliary Inputs/Rear Camera Operation. . . . . . . . . . . . . . . . . . . . . . . . . . 21

SWC Input Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

2
 DCPA701

WARNING
Upon installation of this monitor/media player (“unit”) into a vehicle, the driver of the vehicle
must not operate this unit by watching videos or playing video games while driving.
Failure to follow this instruction could lead to driver distraction which could result in
serious injury or death to the vehicle’s occupants or persons outside the vehicle and/or
property damage.

Several states prohibit the installation of monitors/media players if the screen is visible
from the driver’s seat. If you reside in a jurisdiction which has enacted such a law, this
unit must not be installed so that the screen is visible from the driver’s seat. When
installing this unit in the front console/dashboard, the unit must be positioned so that it is
facing the front passenger seat only. Failure to follow this instruction could lead to driver
distraction which could result in serious injury or death to the vehicle’s occupants or
persons outside the vehicle and/or property damage.

This unit is designed so that it may be operated only when the vehicle is in “Park” and the
parking brake is fully engaged. To this end, this unit includes a parking brake lock-out
feature which prohibits the unit from operating if the vehicle is not in “Park” and/or the
parking brake is not fully engaged. When installing this unit, the installer must connect
the parking brake detect wire to the parking brake mechanism in order to make the
parking brake lock-out feature operable. DO NOT simply ground the parking brake detect
wire to a metal portion of the vehicle. Failure to properly install the parking brake lock-
out feature could lead to driver distraction which could result in serious injury or death to
the driver’s occupants or persons outside the vehicle and/or property damage.

Once the parking brake lock-out feature is installed, the owner/user must not attempt to
disrupt/neutralize the parking brake lock-out feature by (a) partially engaging the parking
brake and/or (b) purchasing/using any device or unit designed to send necessary brake
signals to the unit. Failure to follow these instructions could lead to driver distraction
which could result in serious injury or death to the driver’s occupants or persons outside
the vehicle and/or property damage.

When operating this unit, keep the unit’s volume level low enough so that the vehicle’s
occupants can hear traffic-related sounds such as police and emergency vehicles.
Failure to follow this instruction could lead to driver distraction which could result in
serious injury or death to the vehicle’s occupants or persons outside the vehicle and/or
property damage.

3
 DCPA701

FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your
body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

4
 DCPA701

Preparation
Before You Start
• Disconnect negative battery terminal. Consult a qualified technician for instructions.
• Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight, or where it
would be subject to dust, dirt or excessive vibration.

TRIM RING M5.0
x
6.0mm M5.0
x
5.0mm

MOUNTING SCREWS

5
 Note:

Wiring Notes:
WHITE LEFT FRONT(+)

Subwoofer output

Rear camera input

WHITE/BLACK LEFT FRONT(-)

GRAY RIGHT FRONT(+)

GRAY/BLACK RIGHT FRONT (-)

GREEN LEFT REAR(+)
GREEN/BLACK LEFT REAR(-)
VIOLET RIGHT REAR(+)

VIOLET/BLACK RIGHT REAR(-)

IGNITION /
RED IGNITION / 12V(+) ACC 12V(+)

BLACK CHASSIS GROUND(-) GROUND(-)

20PIN
YELLOW BATTERY 12(+) BATTERY(+)
ORANGE LLUMINATION(+) ILLUMINATION
VIOLET/WHITE REVERSE(+) REVERSE(+)
BLUE POWER ANTENNA (+)
PINK PARKING BRAKE(-)

BLUE/WHITE REMOTE TURN-ON(+)

GRAY(RED CAP) SWC INPUT SWC
IN

A rear view camera (not included) can be used with the Camera input.
BLACK
GND
RED
CAMERA
12V
BLACK
YELLOW CAMERA
IN
BLACK
AV
IN
R

damage. The unit uses (1) 15 amp ATC mini style fuse located on the power connector.
RED
BLACK
WHITE AV
IN
L
BLACK
YELLOW VIDEO
IN
Wiring Diagram - Inputs/Outputs

The Subwoofer preamp audio output (Blue jacket with Black RCA) is active in all audio modes.
BLACK
WHITE LINE
OUT
FRONT
L
18PIN
CarPlay and

BLACK
Android Auto

RED LINE
OUT
FRONT
R
DCPA701

GRAY
WHITE LINE
OUT
REAR
L
GRAY
RED LINE
OUT
REAR
R
BLACK
BLUE
SUB
WOOFER
1

When replacing a fuse, make sure to use the correct type and amperage. Using an incorrect fuse could cause
BLACK
BLUE
SUB
WOOFER
2

6
 DCPA701

Control Locations

1 2 3 4 5 6

The radio display features the following functions and displays:

1 RESET
2 VOL-
3 VOL+
4 POWER/MUTE
5 SOURCE
6 VOICE ACTIVATION BUTTON

7
 DCPA701

General Operation
Power On/Off Momentarily press to turn the unit on. Press and hold to turn the
unit off.
Volume Press "VOL+" or "VOL-" to increase or decrease the volume level.
Mute Momentarily press MUTE to silence the audio. Momentarily press MUTE
again to return to the previously selected volume. Rotating the volume
knob while the volume is muted will also cancel the mute function.
Mode Press MODE at the top left corner of the screen to display the main
menu.

Press the Radio/USB/Android Auto/CarPlay/BT Phone/BT Audio/AV In/

Settings

Note: Modes of operation can also be accessed by selecting the

corresponding icon from the main menu.
Main Menu Operation Mode Selection: Press the icon at the top left corner of the
screen to display the OSD main menu. Press the Radio/USB/Android
Auto/CarPlay/BT Phone/BT Audio/AV In/Settings in the Main meu pate
to select the desired source.

Dimmer Press the icon to adjust the brightness.

A/V In Connect external audio/video devices to the rear RCA Type A/V Input
USB Insert a USB flash drive to play MP3/FLAC files.
Reset To resolve abnormal operation or if the unit is inoperable, Press the
RESET button located on the front panel. The unit will reset the main
processor to the default settings,

Note: Use the tip of a pen to access the reset button. To restore the
factory default software settings.

8
 DCPA701

General Operation
Reset To resolve abnormal operation or if the unit is inoperable, Press the RESET
button located behind the front panel directly under USB port. The unit will
reset the main processor to the default settings,

Note: Use the tip of a pen to access the reset button. To restore the factory
default software settings.
Setup Menu From the Main Menu screen, select Setup to access the Settings menu
and select from eight categories represented by the icons on the top of the
screen: General, Audio, Display, Others. Select the category, and adjust any
of the available options using the touch screen.

General:
• Adjust the date and time- Day, Month, Year, Hour, Minute and Format.
• Time Format- Select between 12-Hour and 24-Hour Time Format.
• Beep Tone - Turn the Beep Tone On or Off.
• Radio Region - Select Radio Region.
Audio:
• Equalizer-Select between the following EQ presets: Default, User,
Classic, Rock, Jazz, Electric, Pop, Soft (allows user to enter custom EQ
settings).
• Time Alignment-To adjust time correction settings select“PRESET 1”
”PRESET 2“or“PRESET 3”.
• Loudness - Touch screen button to turn the Loudness function on/off.
• Subwoofer Control - Touch the button to turn the Subwoofer Control
On/Off.
• Subwoofer Gain - Select subwoofer -15 to 0 ( -6 is default ).

Display:
• Brightness- Press > or < to adjust to desired level.
(O Minimum/20 maximum: Day: 20 is default, Night: 6 is default).
• Dimmer Mode- Press > or < to adjust to change the mode
(Auto/Day/Night).

Others:
• Factory Default-Reset Bluetooth Settings or Reboot System.
• System Version-Displays soft ware version of unit .

9
 DCPA701

Audio Operation
Equalizer Menu From the Main Menu screen, Press the Equalizer icon on the main menu
screen to adjust Fader and Balance controls, Equalizer
(8-Band Tone Control and 8 Presets EQ Settings).

Time Alignment Menu 2 3

1 Surround Presets
2 Time Delay Setting
3 Speaker Positions
4 Reset to Default Settings

1 4

Adjustments:
To properly set the time alignment, you will need measure the distance
from each speaker (in ft) to where you want the “center stage” to be. for
example, if you want the position to be at the divers seat, then meausre
each speaker side (front & rear) to where your head is located and set the
distance accordingly.
Each vehicle will vary in distance, so settings will be different in each case.

10
 DCPA701

AM/FM Tuner Operation

1 2 3 4

5 6

8 9 10 11 12
Radio Operation From the main menu, touch Radio icon on the screen to select AM/
FM tuner mode.

Main Menu 1 Press icon to return to Main Menu screen.

Current Mode Indicator 2 Display status of various tuning functions including Auto.

Local / Distance 3 Press DX/LOC text to turn on the local or distance.

Dimmer 4 Press the icon to adjust the brightness.
Seek Tune Down 5 Press to automatically tune to a lower frequency.
Seek Tune Up 6 Press to automatically tune to a higher frequency.
Preset Stations 7 To store a station as a preset in the current band, tune to the desired
station, then press the desired preset number from the list. Press
any preset in the list to recall and begin playback of that station.
(Hold this button down for a few seconds and it will switch between
AS and PS)
FM 8 Press to toggle between FM1, FM2 and FM3.
AM 9 Press to toggle between AM1 and AM2.
AS/PS 10 Auto Store Presets: Press and hold AS/PS to automatically program
the FM(18)/AM(12) available into the presets in the current Band.
Preset Scan: Press AS/PS to scan through all tunable presets in the
current band and play them for 3 seconds each.
EQ 11 Press the icon to adjust Equalizer setting.
Keypad 12 Direct Search Keypad
11
 DCPA701

USB Operation
1 2 3 4 5

8 9 10 7

USB From the main menu, touch the USB icon on the main screen.

Main Menu 1 Press icon to return to Main Menu screen.

Current Mode Indicator 2 Displays source currently playing.

EQ 3 Press the icon to adjust Equalizer setting.

Search 4 Press icon to search a music file.

List 5 Press icon to access a list of all files and folders on the device.
- Press to access the root directory
- Press a folder name to access that folder, and press to return to
the file list
- Use the up and down arrows to navigate the file list
- Press the " " arrow to return to the previous screen.

Repeat 6 Press icon to repeat current track and adjust to repeat all tracks in
the current folder. Touch RPT again to exit repeat mode.

Random 7 Press icon to shuffle all tacks in the current folder. and again to
shuffle all tracks. Touch icon again to exit Repeat mode.

Track Down 8 Press icon to return to the beginning of the current track.

Play / Pause 9 Press icon to pause or resume playback.

Track Up 10 Press icon to skip ahead to the next song

12
 DCPA701

Media Compatibility
File Type MP3
FAT 12 X
File System FAT
FAT 16/FAT 32 

File .mp3/.MP3/.Mp3/.mP3/.flac/ogg 
Extension .rmp/.m4a X
MPEG 1 
MPEG
MPEG 2 
Format
MPEG 2.5 
MPEG 1 32/44.1/48kHz
Sampling
MPEG 2 12/16/22.05/24kHz
Frequency
MPEG 2.5 8/11.025/12kHz
MPEG 1 32 ~ 320kbps
Bitrate MPEG 2 8 ~ 160kbps
MPEG 2.5 8 ~ 160kbps
Directory Depth Unlimited
File Name Length 32 bytes
Total File Number 2000 files

Other Total Folder Number 200 folders

Information File Number via Folder 2000 files
ver.1.x 
MP3 ID3 TAG ver.2.x 
Title, Artist, Album 
Notes:
• Due to ongoing technological advancement, some USB flash drives may be incompatible with this unit.

13
 DCPA701

Media Compatibility
Media Compatibility The following types of files are not compatible:
• MP3 PRO format, MP3 playlists
• RMP format
• AAC, protected AAC, M4A format

Playback Order MP3 playback sequence begins in the root folder of the USB device. Any
empty folders or folders that do not include MP3 files are skipped.

Compatible Recording Formats ISO9660 standards:

• Maximum nested folder depth is 8 (including the root folder).
• Valid characters for folder/file names are letters A-Z (all caps), numbers
0-9, and “_” (underscore). Some characters may not be displayed correctly,
depending on the character type.
• This device can play back files in Joliet and other standards that conform to
ISO9660. MP3 written in the formats other than the above may not play and/
or their file names or folder names may not be displayed properly.

Notes Some files may not play or be displayed correctly, depending on sampling
rates and bit rates.

For best results, use the following settings when ripping MP3 files:
128kbps or higher constant bit rate
44.1kHz or higher sampling frequency

14
 DCPA701

Bluetooth Operation
1 2 3

6 7 8 9 10

Before using Bluetooth Before you can use a Bluetooth device to make hands-free calls or
stream audio. it must be authenticated. This is also referred to as
"pairing" a device.

Pairing a New Device The unit broadcasts the pairing signal constantly when no devices
are currently connected. Complete the pairing sequence from your
Bluetooth device. Refer to the owner's manual for your device for
more details. The device name is "DCPA701". The unit can be in any
mode of operation when pairing is performed. On certain phones,
pairing may need to be done more than once.

Connect The head unit will automatically connect to the last connected device
when the connect feature is set to Auto connect On. If the connect
feature is set to Auto Connect Off, the head unit will not automatically
connect to any device.

Bluetooth Phone From the main menu. touch the Bluetooth on the screen. Bluetooth
icon will appear anytime a Bluetooth device is connected.

Main Menu 1 Press icon to return to Main Menu screen.

Current Mode Indicator 2 Displays current mode of operation.

Bluetooth Status indicator 3 When Bluetooth is On and a Bluetooth device is being paired. the
indicator will flash. When Bluetooth is On and a phone is connected
to the unit. the indicator will illuminate steady.

Phone Keypad 4 Use the keypad to dial a phone number.

Call 5 Dial a number and touch the Phone icon to call.

15
 DCPA701

Bluetooth Operation
Devices 6 Press the DEVICES to show the pairing device list. To connect to a
previously connected device. press the current device name. Any
previously connected devices that are in rang will be listed by their
device name. Press the desired device name to disconnect from the
current device and connect to the new device.

Phone Book 7 Press "CONTACTS" to access phone book menu.

Call Log 8 Press the Call Log to show( Dialed, Missed and Received Calls ).

Bluetooth Music 9 Press MUSIC to transfer audio between the unit and mobile phone.

Setup 10 Press "SETUP" to access Bluetooth settings.

11 12 13 14 15 16 17 18 19

End Call 11 Press the End icon on screen or the End button on the front Panel to
end a call in progress or o reject an incoming call.

Audio Transfer Button 12 Press to transfer audio between the unit and mobile phone.

Microphone 13 Turn the Microphone voice On or Off.

Keypad 14 Press to return to the Keypad screen.

Repeat 15 Press icon to repeat current track and adjust to repeat all tracks
in the current folder. Touch RPT again to exit repeat mode.

Track Down 16 Press icon to return to the beginning of the current track.

Play / Pause 17 Press icon to pause or resume playback.

Track Up 18 Touch icon to skip ahead to the next song.

Random 19 Press icon to shuffle all tacks in the current folder. and again to
shuffle all tracks. Touch icon again to exit Repeat mode.

16
 DCPA701

Apple CarPlay Operation

Apple CarPlay™ is a smart interface for iPhone, allowing you to voice-control (via Siri)
music, navigation, phone and messaging apps - significantly reducing driver distraction.

Phone - Use Siri to make calls, return missed calls, listen to voicemail
messages, and view the caller ID on the receiver’s screen.

Messages - Ask Siri to send, read, and reply to text messages. This hands free
operation minimizes distraction and allows you to keep hands on the wheel and
eyes on the road.

Music - Access music by artist, song, playlist, and more through the receiver’s
touchscreen or via Siri. The receiver will mirror the iPhone screen with artist and
track information.

Maps - Use Siri to request turn-by-turn directions – search by address or

points of interest. Apple Maps will be mirrored on the screen, including traffic
information and estimated time to destination.

Compatible Devices
Made for iPhone models:
iPhone12 mini, iPhone 12 , iPhone 12 Pro, iPhone Pro Max, iPhone 11 Plus, iPhone 11,
iPhone XS Max, iPhone XS, iPhone XR, iPhone X, iPhone 8, iPhone 8 Plus, iPhone 7, iPhone
7 Plus, iPhone 6, iPhone 6S

17
 DCPA701

Apple CarPlay Operation

When the CarPlay menu is displayed, the home button in the lower left corner work just
like the home button on your iPhone.
Press and hold it to summon Siri and begin your voice commands.

At any time during CarPlay operation, you can press this button momentarily to
return to the main CarPlay menu screen.

Press any Application button on the main CarPlay menu to access that operation directly.
The toolbar on the left side of the screen displays the time, signal strength and shortcuts
to the most popular applications - Phone, Music and Navigation - so they can be accessed
quickly and easily without returning to the main menu.

Controlling Apple CarPlay™

The following basic controls will operate many standard CarPlay features.

Touch - Briefly press the desired option.

Swipe - Briefly swipe in the desired direction.

Drag - Press, hold and drag to the desired location.

Exiting Apple CarPlay™

Disconnecting your iPhone will automatically exit CarPlay mode. To exit CarPlay mode
while your phone is still connected, press the Power/Volume knob momentarily, and the
unit's main menu will be displayed.

18
 DCPA701

Android Auto™ Operation

Android Auto™ brings the most useful apps to your phone screen or your compatible car
display, in a format that makes it easy for you to keep your main focus on driving. You can
control things like navigation and maps, calls and text messages, and music.

Google Assistant
With your Google Assistant on Android Auto, you can keep your eyes on the road and your
hands on the wheel while using your voice to help you with your day. Simply say, “Ok
Google,” or in compatible cars, long press the voice control button on your steering wheel.

Navigation
Get real-time traffic alerts to avoid hazards, speed traps, and find the fastest route. Or take
a break and find a bite along the way.

Calls & Messages

Your Google Assistant lets you stay connected while you’re driving. Your Assistant can
help you call phone numbers from your contacts, chat with your favorite apps, read your
messages aloud and text back, keeping your hands on the wheel.

Compatible Devices
Android Auto™ requires the Android Auto app from Google Play installed on an Android
smartphone running Android Lollipop 5.0 or higher.

Warning:
Certain uses of the smartphone may not be legal while driving in your jurisdiction, so you
must be aware of and obey any such restrictions. If in doubt as to a particular function,
only perform it while the car is parked. No feature should be used unless it is safe to do so
under the driving conditions you are experiencing.

Starting Android Auto™

Wireless Android Auto Connection Descriotion.
1. Enter the main UI and click BT Phone to enter the Bluetooth interface;
2. Click Refresh to search nearby Bluetooth, You'd better turn on your Phone's WLAN
before you connect to Bluetooth, otherwise the connection will fail;
3. Click Pair to match Bluetooth, then there will be a notification to select settings and select
your mobile Phone, and the Android Auto connection is successful;
4. Enter the Android Auto interface, click the functions of Phone/ Music/Map/Information/
etc.
Note: When the device for Android Auto is connected to this unit, the device is also
connected via Bluetooth at the same time. If five devices are already paired, the message
confirming whether to delete the registered device is displayed. If you want to delete the
device, touch [Agree]. If you want to delete other device, touch [BT Settings] and delete the
devices manually.
Note: If Android Auto is turned on during a call on a cellular phone other than the Android
Auto compatible device, the Bluetooth connection will switch to the Android Auto compatible
device after the call.
19
 DCPA701

Android Auto™ Operation

Using Android Auto™
The Android Auto™ home screen displays personalized information, like time to your
destination, reminders, recent calls incoming messages, the song you're listening to, and
Google Now cards.

When the Android Auto™ menu is displayed, you can say "OK Google" or select the
microphone in the upper right corner to talk to Google.

1 2 3 4

1 Android Auto Home Button

2 Recent Apps
3 Notification Button
4 Activate Google Assistant™

Exiting Android Auto™

To exit Android Auto™, press the Exit button. Disconnecting your Android phone will
automatically exit Android Auto™ mode.

20
 DCPA701

Rear RCA Input

A/V IN Connect an optional audio/video source into the RCA (rear) input.

Adjust volume on the external audio source as needed (if connected to the
headphone output of the device).

Rear Camera Operation - (Optional)

Using Rear Camera Connect an optional rear camera to the Camera Input (Black RCA connector).
Refer to the wiring diagram for details.

Auto Selection The unit will automatically select camera mode when connected to the reverse
lamp circuitry.

21
 DCPA701

SWC Input Operation

The built-in SWC Interface is compatible with PAC steering wheel control modules.
The PAC SWI-RC is recommended. A third-party adapter must be used in order for the
DCPA701 to be compatible with any steering wheel controls. The following controls are
available for most vehicles.

1. Reset 4. Seek/Track Down (-) 7. Volume Down (-) 10. BT End

2. Mode 5. Mute 8. Band
3. Seek/Track Up (+) 6. Volume Up (+) 9. BT Talk

Note: Not all OE steering wheel functions may be supported by the DCPA701.

PAC SWI-RC Installation Hints

1. Set "Radio Select Switch". Set the SWI-RC to position 7 - "Pioneer/Other/Sony".
2. To program, use the Pioneer/Sony/Other radio function mapping order for DUAL units.
3. When programming the SWI-RC, if a function is not supported (or not desired), then the
function MUST be skipped as per the PAC SWI-RC instructions.
4. The SWC function MUST be programmed in the correct order per the PAC SWI-RC radio
function mapping order instructions.

SWI-RC (3.3VDC Reference)

Function Function
Order Mapping Center Pin (Ring) Voltage
Tip Pin Voltage
(Function Select)
1 Reset
2 Mode
3 Seek + / Track + H 3.3v 0.6
4 Seek - / Track - H 3.3v 1.81
5 Mute H 3.3v 1.01
6 Volume + H 3.3v 2.07
7 Volume - H 3.3v 2.32
8 Band H 3.3v 2.73
9 BT Talk L 0.0V 0.60
10 BT End L 0.0V 1.01

22
 DCPA701

Troubleshooting

General
Problem Cause Action
Yellow wire not connected or incorrect voltage
Unit will not turn on Check connections for proper voltage (11~16VDC)
Red wire not connected or incorrect voltage
(no power)
Black wire not connected Check connection to ground
Fuse blown Replace fuse(s)
Speaker wires not connected Check connections at speakers
Unit has power
(but no sound) One or more speaker wires touching each Insulate all bare speaker wires from each other and
other or touching chassis ground chassis ground
Yellow or red wire touching chassis ground Check for pinched wire
Unit blows fuse(s) Speaker wires touching chassis ground Check for pinched wire
Incorrect fuse rating Use fuses with correct rating
Unit has audio Parking brake safety circuit not connected Check connections at parking brake
(but no video) Parking brake not applied Apply parking brake as described on page 26
IR remote does not work Dead battery Replace battery

For Your Records Please keep your original sales receipt and be prepared to provide this receipt in
the event you require service, as your original receipt is considered the best proof of
purchase and indicates the date you purchased your Dual product.

Dealer Name

Dealer Phone

Purchase Date

Register Your Product Register your product online at www.dualav.com.

23
 DCPA701

Specifications
FM Tuner Tuning range: 87.5MHz-107.9MHz
Usable sensitivity: 10dBf
50dB quieting sensitivity: 20dBf
Stereo separation @ 1kHz: 38dB
Frequency response: 30Hz-13kHz

AM Tuner Tuning range: 530kHz-1710kHz

Usable sensitivity: 24uV
Frequency response: 30Hz-2.3kHz

Front USB Compatibility: High Speed USB 2.0

USB Class: Mass storage class

Monitor Panel size: 7” diagonal measurement

View angle (up/down/left/right): 50/70/70/70
Resolution: 1024 (H) x 600 (V)
Brightness (cd/m2): 500
Contrast ratio: 500:1
Pixels: 1,152,000

General Speaker output impedance: 4 ohms

Line output voltage: 2 volt RMS
Line output impedance: 200 ohms
Chassis dimensions: 7" x 5" x 4" (W x D x H)

Design and specifications subject to change without notice.

CEA-2006 Power Standard Specifications

(reference: 14.4VDC +/- 0.2V, 20Hz~20kHz)

Power Output: 16 Watts RMS x 4 channels at 4 ohms and < 1% THD+N

Signal to Noise Ratio: 80dBA (reference: 1 watt into 4 ohms)

24
 DCPA701

Limited One Year Warranty

This warranty gives you specific legal rights. You may What to do?
also have other rights which vary from state to state. 1. Before you call for service, check the
troubleshooting guide in your owner’s manual.
Dual Electronics Corp. warrants this product to the A slight adjustment of any custom controls may
original purchaser to be free from defects in material save you a service call.
and workmanship for a period of one year from the
date of the original purchase. 2. If you require service during the warranty period,
you must carefully pack the product (preferably
Dual Electronics Corp. agrees, at our option, during in the original package) and ship it by prepaid
the warranty period, to repair any defect in material transportation with a copy of the original receipt
or workmanship or to furnish an equal new, renewed from the retailer to an
or comparable product (whichever is deemed authorized service center.
necessary) in exchange without charges, subject to
verification of the defect or malfunction and proof 3. Please describe your problem in writing and
of the date of purchase. Subsequent replacement include your name, a return UPS shipping address
products are warranted for the balance of the original (P.O. Box not acceptable), and a daytime phone
warranty period. number with your shipment.

Who is covered? This warranty is extended to the 4. For more information and for the location of the
original retail purchaser for products purchased from nearest authorized service center please contact
an authorized Dual dealer and used in the U.S.A. us by one of the following methods:

What is covered? This warranty covers all defects • Call us toll-free at 1-866-382-5476
in material and workmanship in this product. The • E-mail us at cs@dualav.com
following are not covered: software, installation/
removal costs, damage resulting from accident, Exclusion of Certain Damages: This warranty is
misuse, abuse, neglect, product modification, exclusive and in lieu of any and all other warranties,
improper installation, incorrect line voltage, expressed or implied, including without limitation
unauthorized repair or failure to follow instructions the implied warranties of merchantability and fitness
supplied with the product, or damage occurring for a particular purpose and any obligation, liability,
during return shipment of the product. Specific right, claim or remedy in contract or tort, whether or
license conditions and copyright notices for the not arising from the company’s negligence, actual or
software can be found via www.dualav.com. imputed. No person or representative is authorized
to assume for the company any other liability in
connection with the sale of this product. In no event
shall the company be liable for indirect, incidental or
consequential damages.

25
 Dual Electronics Corp.
Toll Free: 1-866-382-5476
Monday-Friday, 9AM-5PM EST
www.dualav.com
©2021 Dual Electronics Corp. All rights reserved.

NSC0421-V01