Scan to see the online manual.

OWNER'S MANUAL

DISHWASHER
Read this owner’s manual thoroughly before operating the appliance
and keep it handy for reference at all times. This abridged owner's
manual addresses user safety, precautions, and installation
information.

To view the complete owner's manual, you may:

1. Online manual: Visit the LG website at: http://gscs-manual.lge.com/

Total/HQ/GatewayPage/main.html or scan the QR code above; or
2. Printable PDF manual: Visit lg.com and search for your model
number; or
3. Call or write to customer service as provided in your Limited
Warranty.
ENGLISH

LDFN343**

www.lg.com
MFL69261756
Rev.00_090623 Copyright © 2023 LG Electronics Inc. All Rights Reserved.
2

TABLE OF CONTENTS
3 IMPORTANT SAFETY
INSTRUCTIONS
3 READ ALL INSTRUCTIONS BEFORE USE
3 WARNING STATEMENTS
6 CAUTION STATEMENTS

8 PRODUCT OVERVIEW
8 Product Features

10 INSTALLATION
10 Before Installing
12 Preparing Cabinet Opening
12 Preparing Water and Electrical Connections
13 Preparing Dishwasher
15 Sliding Dishwasher into Cabinet Opening
16 Connecting Water Supply Line and Power
18 Connecting the Drain Hose
20 Leveling Dishwasher
21 Securing Dishwasher in Cabinet Opening
21 Final Installation Check

23 OPERATION
23 Before Using
24 Control Panel
25 Wash Cycles
25 Options and Extra Functions
26 Loading the Dishwasher
27 Loading the Silverware Basket
27 Loading the Lower Rack
28 Loading the Upper Rack
28 Adding Cleaning Products

30 SMART FUNCTIONS
30 LG ThinQ Application

31 MAINTENANCE
31 Cleaning and Care

35 TROUBLESHOOTING
35 Before Calling for Service

37 LIMITED WARRANTY

37 USA
 IMPORTANT SAFETY INSTRUCTIONS 3

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USE

ENGLISH
Safety Messages
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and
follow all safety messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or injure you and others. All safety messages
will follow the safety alert symbol and either the word WARNING or CAUTION.
These words mean:

WARNING
You may be killed or seriously injured if you do not follow instructions.

CAUTION
You may be injured or cause damage to the product if you do not follow instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury,
and tell you what may happen if the instructions are not followed.

WARNING STATEMENTS
WARNING
• To reduce the risk of explosion, fire, death, electric shock, scalding or injury to persons when using this
product, follow basic precautions, including the following:

Installation
• Connect to a properly rated, protected, and sized power circuit to avoid electrical overload.
• To reduce the risk of severe injury or death, follow all installation instructions.
• The appliance must be installed and electrically grounded by qualified service personnel in accordance
with local codes.
• Disconnect the power supply line, house fuse or circuit breaker before installing or servicing the
appliance.
• When moving or installing the product in a different location, call qualified service personnel for
installation and service.
• Keep packing materials out of the reach of children. Packaging material can be dangerous for children.
There is a risk of suffocation.
• Moving or installation of the appliance requires two or more people.
• This appliance is not designed for maritime use or for mobile installations such as in RVs, trailers, or
aircraft.
• Store and install the appliance where it will not be exposed to temperatures below freezing or exposed
to outdoor weather conditions.
• This appliance must be positioned near to an electrical power supply.
• Do not, under any circumstances, cut or remove the ground from the power supply line.
4 IMPORTANT SAFETY INSTRUCTIONS

• When installing or moving the appliance, be careful not to pinch, crush, or damage the power supply
line.
• Do not install the appliance in humid spaces.
• Destroy the carton, plastic bag, and other packing materials after the appliance is unpacked. Children
might use them for play. Cartons covered with rugs, bedspreads, or plastic sheets can become airtight
chambers.
• Never attempt to operate this appliance if it is damaged, malfunctioning, partially disassembled, or has
missing or broken parts, including a damaged power supply line.
• Adhere to all industry recommended safety procedures including the use of long-sleeved gloves and
safety glasses.
• The installer must ensure that the dishwasher is completely enclosed at the time of installation.
• Use new hoses when connecting the appliance to the water supply. Do not reuse old hoses.
• After installing, check the hose connection for leaks.
• Do not damage or place heavy items on the power supply line of the appliance.

Operation
• Repair or immediately replace all power supply lines that have become frayed or otherwise damaged. Do
not use a power supply line that shows cracks or abrasion damage along its length or at either end.
• If you detect a strange sound, a chemical or burning smell, or smoke coming from the appliance, unplug
it immediately, and contact an LG Electronics customer information center.
• Never unplug the appliance by pulling on the power supply line.
• Do not use an extension cable or adapter with this appliance.
• Do not grasp the power supply line or touch the appliance controls with wet hands.
• Do not modify or extend the power cable.
• If the product has been submerged, contact an LG Electronics customer information center for
instructions before resuming use.
• Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other
appliance.
• Keep the area underneath and around your appliances free of combustible materials (lint, paper, rags,
etc.), gasoline, chemicals and other flammable vapors and liquids.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning the use of the appliance by a person responsible for their safety.
• If the electrical supply line is damaged, it must only be replaced by the manufacturer or its service agent
or a similar qualified person in order to avoid a hazard.
• Do not abuse, sit on, or stand on the door of the appliance.
• Read all instructions before using the appliance and save these instructions.
• Use this appliance only for its intended purpose.
• Do not allow children to play on, in or with the appliance. Close supervision of children is necessary when
the appliance is used near children.
• Do not tamper with controls.
• In the event of a gas leak (propane gas, LP gas, etc.) do not operate this or any other appliance. Open a
window or door to ventilate the area immediately.
• Under certain conditions, hydrogen gas may be produced in a hot-water system that has not been used
for two weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot-water system has not been used for
such a period, before using the appliance turn on all hot water faucets and let the water flow from each
for several minutes. This will release any accumulated hydrogen gas. As the gas is flammable, do not
smoke or use an open flame during this time.
 IMPORTANT SAFETY INSTRUCTIONS 5

• Fix the drain hose securely in place.

• Use only detergents or wetting agents recommended for use in a dishwasher and keep them out of the
reach of children.
• Do not let children eat detergent or dishwasher rinse agent.

ENGLISH
• When loading items to be washed:
- Locate sharp items so that they are not likely to damage the door seal.
- Load sharp knives with the handles up to reduce the risk of cuts or other injuries.
• Do not wash plastic items unless they are marked "dishwasher safe" or the equivalent. For plastic items
not so marked, check the manufacturer’s recommendations.
• Do not touch the HEATING ELEMENT during or immediately after use.
• Do not operate your dishwasher unless all ENCLOSURE panels are properly in place.
• Do not abuse, sit on, or stand on the door or dish rack of the dishwasher.
• Do not install or store the dishwasher where it will be exposed to weather conditions.
• After cleaning the dishes, turn off the water supply. Before cleaning, turn the water supply back on and
check the connections.
• Do not open the appliance door while it is operating. For safety reasons, the drain pump operates if the
door is opened, resulting in a longer cycle time.
• Be careful not to catch your hand when closing the door of the product.
• Do not plug the dishwasher into a damaged outlet.
• Do not install or keep the dishwasher near electrical components or exposed flames.
• Do not wash dishes exposed to gasoline, solvents or other flammable materials.
• When cleaning, do not spray water on the product directly.
• Do not press buttons with a sharp object such as an awl or pin.
• Do not use solvent-based detergent.
• Do not come into contact with the steam outlet.
• Small parts, such as rack clips and filter retaining posts can be a choke hazard to small children if
removed from the dishwasher. Keep out of reach of small children.

Maintenance
• Do not repair or replace any part of the appliance. All repairs and servicing must be performed by
qualified service personnel unless specifically recommended in this Owner’s Manual. Use only
authorized factory parts.
• Do not disassemble or repair the appliance by yourself.
• Remove any dust or foreign matter from the power supply line.
• Disconnect this appliance from the power supply before cleaning and attempting any user maintenance.
Turning the controls to the OFF position does not disconnect this appliance from the power supply.
• Remove the door before the appliance is removed from service or discarded to avoid the danger of
children or small animals getting trapped inside.
• Unplug the appliance before cleaning to avoid the risk of electric shock.
• Before discarding the appliance, cut off the power supply line and destroy the appliance's control panel.

Grounding Instructions
• For a permanently connected dishwasher: This appliance must be connected to a grounded metal,
permanent wiring system, or an equipment-grounding conductor must be run with the circuit
conductors and connected to the equipment-grounding terminal or lead to the appliance.
• Connect the ground wire to the green ground connector in the terminal box.
6 IMPORTANT SAFETY INSTRUCTIONS

• For a cord connected dishwasher: This appliance must be grounded. In the event of a malfunction or
breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for
electric current.
• This appliance is equipped with a cord having an equipment-grounding conductor and a grounding
plug.
• The plug must be plugged into an appropriate outlet that is installed and grounded in accordance with
all local codes and ordinances.

WARNING
Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check
with a qualified electrician or service representative if you are in doubt whether the appliance is properly
grounded. Do not modify the plug provided with the appliance, if it will not fit the outlet, have a proper
outlet installed by a qualified electrician.

Tip Over Hazard

• Do not use the dishwasher until completely installed.
• Do not push down on the open dishwasher door.
• Failure to follow these instructions may result in serious injury or cuts.

CAUTION STATEMENTS
CAUTION
• To reduce the risk of minor or moderate injury to persons, malfunction, or damage to the product or
property when using this product, follow basic precautions, including the following:

Installation
• Install the product on a firm and level floor.
• This dishwasher must be connected to a hot water supply with a temperature range between 120 °F (49
°C) and 149 °F (65 °C). This temperature range provides the best washing results and shortest cycle time.
The temperature should not exceed 149°F (65 °C) to prevent damage to dishes.
• Do not put the drain hose under the dishwasher during installation.
• Do not turn the dishwasher upside down. Doing so can damage the product.
• Follow these instructions
a) The power-supply receptacle for the appliance must be installed in a cabinet or on a wall adjacent to
the undercounter space in which the appliance is to be installed;
b) There must be an opening through the partition between the compartments specified in (a) that is
large enough for the attachment plug to pass through. The longest dimension of the opening must not
be more than 38 mm (1.5 in);
c) The edges of the opening specified in (b) must, if the partition is wood, be smooth and rounded, or, if
the partition is metal, be covered with an edge protector; and
d) Care must be exercised, when the appliance is installed or removed, to reduce the likelihood of
damage to the power-supply cord.
• If the power supply cord, water supply hose, or drain hose is passed through an opening in a metal
cabinet, the edges of the opening must be covered by an edge protector to avoid risk of electric shock,
leaking, or fire. 1 1/2" (38.1 mm) plastic or rubber wire grommets can be purchased online or at a local
hardware store for this purpose. For further details, call an LG Electronics Customer Information Center
at 1-800-243-0000 (U.S.A.) or 1-888-542-2623 (Canada).
 IMPORTANT SAFETY INSTRUCTIONS 7

Operation
• Do not place objects on top of the appliance.
• Turn off the water faucets and unplug the appliance if the appliance is to be left for an extended period
of time, such as during vacations.

ENGLISH
• Do not store or spill liquid detergents, cleaners, or bleaches (chlorine bleach, oxygen bleach) on the
appliance. Doing so may result in corrosion, discoloration or damage to the surface of the appliance.
• Do not touch draining water which may be hot.
• If the drain hose and the water supply hose are frozen in winter, defrost before using the appliance.
• Do not put hands, feet, or metal objects below or behind the appliance.

Maintenance
• If cooking oil is spilled on the exterior of the product, wipe it off immediately. Do not clean the exterior of
the product with cleaners which contain alcohol, thinners, bleach, benzene, flammable liquids, or
abrasives. These substances may discolor or damage the appliance.

SAVE THESE INSTRUCTIONS

8 PRODUCT OVERVIEW

PRODUCT OVERVIEW
Product Features
The images in this guide may be different from the actual components and accessories, which are subject
to change by the manufacturer without prior notice for product improvement purposes.

NOTE
• For your safety and for extended product life, use only authorized components. The manufacturer is not
responsible for product malfunction or accidents caused by the use of separately purchased
unauthorized components or parts.
• Do not remove the safety cover at any time.
• To ensure reliability, each LG dishwasher goes through thorough quality control before it leaves the
factory.
• You may find water droplets or water spots from this process inside your new dishwasher.

Front View Interior View

a Control Panel & Door Handle a Top Wash Impeller

b Front Cover b Upper Spray Arm

c Lower Cover c Lower Spray Arm

d Leveling Feet d Filtration System

e Base e Detergent and Rinse Aid Dispenser

f Safety Cover f Drying Vent Cover

g Shipping Brace g Lower Rack

h Silverware Basket

i Upper Rack

NOTE
• The silverware basket ships installed at the back
of the bottom rack. For best performance, install
it along the right side.
 PRODUCT OVERVIEW 9

• Remove all packing materials from the exterior

and interior of the dishwasher before installing
the appliance.
• Press the tab to remove the cable tie by hand.

ENGLISH
Cutting the tie with a knife or scissors may
damage the rack or the silverware basket.

Accessories

a b c
a Installation Brackets (2 ea)

b Wood Screws (4 ea)

c Hose Clamp

NOTE
• Accessories are inside the silverware basket.

Product Specifications
The appearance and specifications listed in this
manual may vary due to constant product
improvements.

Model LDFN343**

Electrical 120 V, 60 Hz AC only,

Requirements 15 A circuit breaker

Water Pressure 20 psi - 80 psi

(140 kPa - 550 kPa)

Dimensions 23 3/4” X 24 5/8” X 33 5/8”

(Width X Depth X (603 mm X 625 mm X 854
Height) mm)

Inlet Water 120 ℉ - 149 ℉

Temperature (49 ℃ - 65 ℃)

Net Weight 70 lbs. (31.8 kg)

10 INSTALLATION

INSTALLATION
Before Installing
Online Installation Guide
This QR code is for reference only. For complete d e f
installation instructions, see the owner's manual
supplied with each dishwasher.

English
g h i
a Electrical Cable
• 16 AWG, with 2 conductors and 1 ground

b Water Supply Tube

• Minimum 3/8″ O.D. copper tubing or
https://www.lg.com/us/support/video-tutorials/lg- stainless steel braided water supply line
dishwasher-installation-CT10000009- c Fittings for Tube
1366643457088
d Coupler
French
e Electrical Tape

f Air Gap

g Wire Nuts for 16-Gauge Wiring

h Hose Clamp

https://www.lg.com/ca_fr/soutien/aide-produit/ i 3/8″ UL Approved Strain Relief

CT20100059-20152463332979
NOTE
WARNING • Power cord installation kit is available on
• DISCLAIMER - This Guide is strictly confidential LG.com, part number AEM75698901 (Model
and shall not be copied, disclosed, distributed, name : D-PC1)
disseminated, publicized or reproduced, in • Inlet hose installation kit is available on LG.com,
whole or in part, without the prior written part number AEM75698902.
authorization of LG Electronics.
• Drain extension hose installation kit is available
The Guide may contain inaccuracies and/or on LG.com, part number AEM75698903.
typographical errors and may be changed or
updated at any time by LGE without notice.

Tools Needed
Parts not Provided

a b c
a b c

d e f
 INSTALLATION 11

c Preparing Dishwasher

d Sliding Dishwasher into Cabinet Opening

e Connecting Water Supply Line and Power

ENGLISH
g h i
f Connecting the Drain Hose

g Leveling Dishwasher

j k l h Securing Dishwasher in Cabinet Opening

i Final Installation Check

m n o Product Dimensions

Back View
23 3/4" (603 mm)
p
a Flat-Blade Screwdriver

b Phillips Screwdriver

c Hole Saw min. 2 1/2” bit

d Electric Drill

e Gloves

f Safety Glasses
4 1/2"
(115 mm)
g Adjustable Wrench 5 1/4"
(134 mm)
h Tape Measure 9 3/8" 411/16"
(238 mm) (119 mm)

i Utility Knife
Side View
j Level For easiest installation, see marked areas a for
water and electrical clearances in base of
k 1/4” Square Drive Wrench dishwasher. Water supply hose, drain hose and
electric cable should be passed through this area.
l Nipper
24 5/8" (625 mm)
m Pliers

n Wire Stripper

o Tubing Cutter

p 3/8” Square Drive Wrench + 1/2” Socket

33 5 /16" 33 5/8"
(846 mm) (854 mm)

Installation Overview
Please read the following installation instructions
first after purchasing this dishwasher or 4 1/2"
transporting it to another location. (115 mm)
2 15/16" (75 mm)
a Preparing Cabinet Opening 4 3/4" (120 mm)
a
20 3 /16" (512 mm)
b Preparing Water and Electrical Connections
12 INSTALLATION

Preparing Cabinet Opening

This dishwasher is designed to fit a standard
3.5 ''
dishwasher opening. An opening may be needed
on both sides to route plumbing and electrical
connections. 2.5 ''

• To ensure proper drainage, install the 4 ''

dishwasher no more than 12 ft. (3.65 m) from
the sink.
WARNING
• The location must have sufficient space for the
dishwasher door to open easily and provide at • The opening must be at least 2 1/2" (63.5 mm) in
least 0.1” (2 mm) between the dishwasher and diameter to prevent damage to the cables and
the cabinet sides. hoses during installation.

• If installing the dishwasher in a corner, leave a • Installation damage is not covered by the
minimum of 2” (50 mm) between the dishwasher warranty, and leaks caused by improper
and the adjacent wall. installation may result in property damage.

• The adjacent wall must be free of obstructions. • Do not use existing holes unless they are in the
target area.
• For flush installations only, you may remove the
cabinet brace a inside the cabinet. • Failure to properly locate the hole for the water
and drain lines may prevent the dishwasher
from installing flush with the cabinets and could
result in kinked, pinched, crushed, stressed or
damaged lines.

Choosing the Proper Location

1 Select a location as close to the sink as

Preparing Water and
possible for easy connections to water supply
line, drain hose and electrical connection. Electrical Connections
WARNING
• Water Connection
- Do not reuse an old hose. Use only a new hose
when installing the dishwasher. The old hose
could leak or burst causing flooding and
property damage. Contact an LG Customer
Information Center for assistance in buying a
new hose.
• Electrical Connection
- Use a time-delay fuse or circuit breaker.
- Operate this appliance with the correct voltage
2 To allow for proper clearance of plumbing as shown in this manual and on the rating
and electrical, use the template included with plate.
the literature to determine the clearance on
the side of the cabinet where the cabinet - The wiring must be grounded properly. If in
meets the back wall. Using a 2 1/2” diameter doubt, have it checked by a qualified
hole saw, drill a hole in the target area as electrician.
shown on the template.
 INSTALLATION 13

- Connect the appliance using 3-wires, including 2 Run the water supply line along the floor 6 1/
a ground wire.
2" – 7 3/4" (165 mm – 197 mm) from the left
- The appliance and outlet must be positioned side of the opening and tape it in place in
so that the plug is easily accessible. front of the opening.

ENGLISH
- Do not use an extension cable or adapter with
this dishwasher.
- Do not overload the outlet with more than one
3 Run the electrical cable c along the floor 14"
appliance. – 16" (356 mm – 406 mm) from the water
supply line d and tape it in place.
- The included 16AWG wire nuts should be used.
• The electrical outlet must be within 4 ft.
- It is the personal responsibility and obligation (1.22 m) of either side of the dishwasher.
of the product owner to have a proper outlet
installed by a qualified electrician. • The best location for the electrical conduit is
on the right side of the back wall. Re-route
the electrical cable before installation if the
electrical conduit pipe is longer than 3" (76
CAUTION
mm) and is centered on the back wall.
• When connecting the dishwasher water supply
line to the house water supply, sealing tape or
compound should be used on pipe threads to
avoid leaks. Tape or compound should not be
used on compression fittings.
• Connect the dishwasher to a hot water supply
with a temperature range between 120 °F (49 ℃)
and 149 °F (65 ℃). This temperature range
provides the best washing results and shortest
cycle time. To prevent damage to dishes, the
temperature should not exceed 149 °F (65 ℃).
• Water supply pressure must be between 20 psi
and 80 psi (140–550 kPa). If the water supply Preparing Dishwasher
pressure exceeds 80 psi, a pressure reducing
valve must be installed. Otherwise premature
failure of the inlet valve may occur. WARNING
• Do not remove safety cover a. Removal can
result in fire, electric shock or death.
Routing Water Supply Line and
Electrical Wiring
There are 2 channels in the bottom of the
dishwasher for routing the water and electrical
connections.
• As shown in the bottom view below, channel a
is for the water supply line, and channel b is for
the electrical cable.
Releasing Drain Hose
Remove the twist tie holding the drain hose to the
back of the shipping brace.

1 Turn off the house water supply and the

circuit breaker or dedicated power before
connecting the dishwasher.
14 INSTALLATION

Removable Shipping Brace Attaching Installation Brackets

The rear shipping brace can be removed if For countertops made of wood or other materials
additional clearance is needed when installing the that will not be damaged by drilling, use the metal
dishwasher under a low countertop. installation brackets provided.
For countertops made of granite, marble, or other
materials that could be damaged by drilling, use
the wood screws to attach the dishwasher to the
cabinet. See installation instructions in Securing
Dishwasher to Cabinet Opening.

NOTE
• Installation brackets and screws can be found in
the silverware basket.

Removing Lower Cover

1 Insert the tabbed end of the installation
CAUTION brackets into the slots in the upper frame.
• If you lay the dishwasher on its back, do so Rotate the brackets until the tabbed ends are
carefully to avoid damaging the drain hose and facing up.
the tub.

1 Remove the screws at either side which attach

the lower cover to the dishwasher.

2 Bend the tabs on the brackets to secure them

to the frame using a pair of needle nose
pliers.
2 Remove the lower cover.

3 If there is insulation padding behind the lower

cover, remove it.

4 Set the parts aside until the installation is

complete.

Removing Packing Materials from

the Interior
Remove all packing materials from the interior of
the dishwasher before installing the appliance.
 INSTALLATION 15

Sliding Dishwasher into NOTE

Cabinet Opening • Open the door and grab the body frame and the
top front opening b of the tub to move or lift the
How to Slide Dishwasher

ENGLISH
dishwasher.

CAUTION
• Do not pull or lift the dishwasher using the
handle a. Doing so can damage the door and
hinges.

1 Align the dishwasher with the opening. Make

sure the water supply line and electrical cable
• Do not push the door of the dishwasher with are in the correct positions to slide into their
knees when sliding the dishwasher into position. channels properly.
Doing so can damage the front cover.

2 Smooth out or pad the edges of the hole

drilled for the water supply to avoid damaging
• Do not push the top of the dishwasher. Doing so the drain hose.
can damage the interior of the dishwasher.

3 Make sure the drain hose is straight before

feeding the end of it through the hole for the
water supply. As you slide the dishwasher into
the opening, you will want to slowly pull on
the drain hose from inside the cabinet to take
up some slack. Be careful not to kink, pinch,
crush or stress the drain hose during
installation to avoid leaking and water
damage.
16 INSTALLATION

Connecting Water Supply

Line and Power
CAUTION
• Do not turn the dishwasher upside down to
connect the water supply line or electrical
supply. Doing so can damage the product.
4 Gradually slide the dishwasher into the
opening, making sure that the water supply
line and electrical cable are passing freely Connecting Water Supply Line
through the channels and do not get caught
under the dishwasher. 1 With the home water supply turned off,
connect the water supply line to the inlet valve
CAUTION on the left front of the dishwasher.
• To avoid malfunctions or leakage, it is important
that the drain hose not get kinked, pinched, CAUTION
stressed or crushed behind or under the • Tape or compound should not be used on
dishwasher or inside the neighboring cabinet. dishwasher inlet valve.
• Damage resulting from improper installation is
not covered under the warranty.

• As you slide the dishwasher into the 2 Tighten the compression nut.
opening, stop periodically (or have an
assistant help) to take up the slack by
pulling the drain hose farther into the
cabinet.

3 Slide the water supply line back through the

channel, pulling gently from inside the
cabinet to make sure the line is not kinked,
pinched, stressed or crushed.
5 Remove the tape from the water supply line
and the electrical cable.
Connecting Power
The dishwasher should have a dedicated properly
grounded branch circuit to connect the 3 wire
setup which includes the ground wire.
If a 3-prong power supply is used, it should be in
an accessible location adjacent to the dishwasher
 INSTALLATION 17

within 4 ft. (1.22 m) of the dishwasher side and not

behind the dishwasher.

ENGLISH
NOTE 5 Insert a 3/8” strain relief b through the hole
• The best location for the electrical conduit is on in the junction box. Tighten the ring nut c to
the right side of the back wall. Re-route the secure it in place.
electrical cable before installation if the electrical
conduit pipe is longer than 3” (76 mm) and is
centered on the back wall.

1 Turn off electrical power to the unit at the

circuit breaker.

2 Use a Phillips screwdriver to remove the

screw from the junction box cover and
remove the cover.
6 Insert the electrical cable through the hole in
the strain relief. Tighten 2 screws to secure
the cable.

3 Use a Phillips screwdriver to remove 2 screws

a.

7 Pull the existing wires through the openings

in the junction box. Tighten 2 screws d to
reassemble the junction box in the appliance.

4 Remove the junction box from the appliance.

18 INSTALLATION

8 Pair the white, black, and green wires to the • Cut the adapter to match the size of the drain
connection as shown. Cutting just beyond the
matching colored wires from the dishwasher.
flare helps to keep the band clamp in place.
Then twist on the provided wire nuts e tightly
to connect the corresponding wires.

NOTE
• For drain hose installation, use the screw style
hose clamp provided with this dishwasher in the
silverware basket.
• If connecting the dishwasher’s drain hose to the
garbage disposal, be sure to follow your
9 Wrap electrical tape f around each garbage disposal’s manual for proper
connection. installation instructions.

Drain Hose Requirements

• Follow local codes and ordinances.
• Do not exceed 12 ft. (3.65 m) distance to drain.
• Do not connect drain hoses from other
appliances to the dishwasher’s drain hose.
• If an extension drain hose is required, use a 5/8"
or 7/8" inside diameter, 2-3 ft. length hose and a
coupler a for connecting the two hose ends.
10 Fold the connected wires back into the
junction box and screw on the junction box
cover.

WARNING
• Verify that the black wire is hot (120 V). If not, or Height of the Drain Hose
if you are unsure of the power supply, have it The height of the drain hose end must be at least
checked by a licensed electrician. 12" (305 mm) and within 40" (1016 mm) from the
base of the dishwasher to avoid water being
siphoned from the tub.
CAUTION
• Do not leave stripped wire exposed. Trim
stripped wire to fit completely inside wire nuts.

Connecting the Drain Hose

If the end of the drain hose does not fit the drain
line, use a heat and detergent resistant adapter Connecting to Disposal without Air
(not supplied). These may be obtained from a local
plumbing supply store. Gap

1 Remove the knockout plug on the disposal

with a hammer and screwdriver.
 INSTALLATION 19

1 Remove the knockout plug with a hammer

and screwdriver.

CAUTION

ENGLISH
• If the knockout plug has not been removed, the
dishwasher will not be able to drain properly.

2 Remove the knockout plug a from the

disposal.

CAUTION
• If the knockout plug has not been removed, the
dishwasher will not be able to drain properly.

2 Attach the drain hose to the waste tee with

the hose clamp provided. Move the clamp into
position and tighten it with a flat-blade
screwdriver.

3 Attach the drain hose to the disposal with the

hose clamp provided. Move the hose clamp
into position and tighten it with a flat-blade
screwdriver.
Connecting to Disposal or Waste
Tee with Air Gap

1 Remove the knockout plug with a hammer

and screwdriver.

2 Connect the end of the drain hose a to the air

gap b with the hose clamp provided. Move
Connecting Waste Tee without Air the clamp into position and tighten it with a
flat-blade screwdriver.
Gap
• This avoids water being siphoned from the
The height of the drain hose end must be at least tub.
12” (305 mm) and within 40” (1016 mm) from the
base of the dishwasher to avoid water being
siphoned from the tub.
20 INSTALLATION

3 If it is not connected, attach the rubber hose Make sure that the gap between the tub walls and
the door liner is the same on either side.
connector to the disposal or waste tee with a
hose clamp (not provided).

Leveling Dishwasher
Check that the dishwasher is level and adjust the
leveling feet if necessary.

CAUTION Adjusting Leveling Feet

• Failure to level the dishwasher may result in Adjust as needed until the dishwasher is
leakage, problems closing the door, or noise. completely leveled.
• Where the cabinet opening is narrower than • Adjust the front and rear leveling feet until they
recommended (see Preparing Cabinet are all in firm contact with the floor. Failure to
Opening), the dishwasher must be carefully level the dishwasher may prevent the door from
leveled and aligned so that the dishwasher is closing properly and the dishwasher will not turn
supported fully by the 3 leveling feet and is not on.
hanging from the installation brackets. Failure to
do so can result in leaks from the front of the
Adjusting Front Leveling Feet
dishwasher, AE errors, difficulty in closing the
door, or failure to operate. Use a flat-blade screwdriver to turn the front
leveling feet and adjust the front of the tub.
• Turn the front leveling feet clockwise to raise the
Checking Leveling front of the tub and counterclockwise to lower it.
To check that the tub is level from front to back,
remove the lower rack and pour 169 oz. (5 L) of
water into the bottom of the tub. The water level
should be near the center of both tub lower
indentations at the front.

• The adjustments work identically for both front

leveling feet.
• When a flat-blade screwdriver is unavailable, use
a 1/4" square drive wrench a or 3/8" square
drive wrench b with 1/2" socket c to turn the
With the lower rack removed, place a level on the
front leveling feet and adjust the front of the tub.
inside wall of the tub to check that the dishwasher
is level from side to side.
• If you do not have a level, try using a
smartphone level application instead.

Adjusting Rear Leveling Foot

Use a Phillips screwdriver to adjust the rear
leveling foot and the rear of the tub using the
center screw at the base of the appliance in the
front.
 INSTALLATION 21

• Turn the center screw clockwise to raise the rear Securing Dishwasher to Countertop
of the tub and counterclockwise to lower it.
Use the bracket screws provided to secure the
brackets at the top of the dishwasher to the
underside of the wood countertop.

ENGLISH
NOTE
• To avoid damaging the screw, do not use an
electric screwdriver.

Securing Dishwasher to Cabinet Frame

If desired, the dishwasher can also be secured to
Securing Dishwasher in the cabinet frame using the instructions which
follow.
Cabinet Opening
There are 2 options for securing the dishwasher. If 1 Remove the 2 plastic caps from the mounting
the countertop is made of wood or a material that bracket access holes.
can safely be drilled into, secure the dishwasher to
the countertop with the provided brackets. If the
countertop is granite, marble, or a material that
cannot be drilled into, secure the dishwasher to
the cabinet frame with the provided wood screws.

CAUTION
• Ensure the dishwasher is level and all leveling
feet are in firm contact with the floor before
attaching the dishwasher to the countertop or 2 Drive a wood screw through the mounting
cabinet. If the dishwasher is not leveled bracket and into the cabinet frame.
properly, the door may not close properly or
water may leak.

NOTE
• Installation brackets and screws can be found in
the silverware basket.
• Use a magnetic screwdriver.
• Cover the filter hole with towels to prevent 3 Reinstall the plastic caps.
screws from falling down into the pump.

Final Installation Check

Testing the Dishwasher
Check if the dishwasher is properly installed.

1 Turn on the circuit breaker.

2 Turn on the house water supply.

22 INSTALLATION

3 Make sure that the door opens and closes Installation Check Error Codes
smoothly. Refer to the chart below before calling for service.
• If necessary, level the dishwasher again.
• If the door will not close, make sure the rack Error Code Possible Cause and Solution
is level.
OE Drain hose is kinked or pinched.
• Feed the drain and water
supply hoses through the hole
under the sink. Then gradually
slide the dishwasher into the
cabinet while pulling on the
hoses under the sink to take up
any slack. This helps avoid
kinking the hoses or trapping
them beneath the dishwasher.
Drain hose is connected to the
• Make sure that all packaging materials have disposal without removing the
been removed. knockout plug.
• Remove the knockout plug
from the disposal.
4 Power on the dishwasher and run a Turbo
Waste tee or disposal is clogged.
cycle to verify proper operation.
• Remove knockout plug on the
waste tee or disposal.
5 Check for leaks at the drain hose and water IE Water supply line is kinked
supply connection. under dishwasher.
• Feed the drain and water
supply hoses through the hole
6 If a water leak is detected, press and hold the under the sink. Then gradually
Start button for 3 seconds to cancel the wash slide the dishwasher into the
cycle and automatically drain the water from cabinet while pulling on the
the dishwasher. Tighten all water connections hoses under the sink to take up
and run another cycle. Repeat until no leaks any slack. This helps avoid
are detected. kinking the hoses or trapping
them beneath the dishwasher.
House water supply is not turned
7 Replace the lower cover. on.
• Turn the water faucet on.
CAUTION
• Only install the lower cover provided with the
dishwasher. Do not install cabinet baseboard a
as it may cause noise and leakage.

8 Remove the protective film from the door, if

present. Leaving the film on may cause
discoloration or condensation on the door.
 OPERATION 23

OPERATION
Before Using

ENGLISH
WARNING
• To reduce the risk of fire, electric shock, or injury to persons, read the SAFETY INSTRUCTIONS before
operating this appliance.

NOTE
• Connect to the hot water supply only. The water supply temperature should be a minimum of 120 °F (49
°C) for better washing performance and shorter cycle time.
• Follow the instructions for loading the dishwasher to ensure effective cleaning.
• Remove insoluble items such as bones, toothpicks, and pieces of paper while loading the dishwasher.

Quick Start automatically turn off a few minutes after

the cycle ends.
1) Load the dishes.
• It is normal for the dishwasher to chime
2) Add the detergent. continuously if you open it during operation
3) Turn on the dishwasher. or just after the cycle ends. The dishwasher
4) Check the rinse aid. is letting you know that the interior
temperatures of the unit are hot and to use
5) Select the cycle and options. caution when reaching inside. Once the unit
6) Operate the dishwasher. has cooled down, the chiming will stop.
• Method 1 For more details, refer to the online owner's
manual.
- Press the Start button and then close the
door in less than four seconds to operate
the dishwasher. If the door is not closed CAUTION
within four seconds, the white LED with • Do not open the door during operation or
time flashes, an audible tone is heard, and immediately after it has completed the wash
the cycle does not start. cycle as the escaping steam may cause scalding
• Method 2 as the door is opened.

- Close the door first and then press the

Start button to operate the dishwasher.
Auto-Off
The dishwasher automatically turns off after four
NOTE
minutes of inactivity if paused or if no cycle is
• If the door is opened during the cycle, the started.
dishwasher will stop. To resume the cycle, see
methods 1 and 2 above.
• If the door is opened during the cycle and is not
closed within four seconds after selecting the
Start button, or if the door is closed without
pressing the Start button, the white LED with
time flashes, an audible tone is heard, and the
cycle does not start.

7) End of cycle.
• When the cycle is complete, a chime will
sound and the display will show ENd until the
door is opened or Power is pressed. To save
energy, press and hold High Temp. for three
seconds to set the ENd display to
24 OPERATION

Control Panel
Control Panel Features

a Power On/Off Button

• Press this button to turn the washer on or off.
• If there is a power surge, power outage, or disruption of any kind, power is automatically turned off
for safety.
• When power is connected again, the dishwasher will turn on automatically and resume the cycle.

NOTE
• When opening or closing the product door, keep fingers and hands away from the control panel to avoid
activating buttons.

b Display
• e : Rinse Aid Icon
- This icon illuminates when the rinse aid level is low. The LED automatically shuts off when the rinse
aid is refilled or the level is set to 0.
- Refer to the Rinse Aid Dispenser Adjustment section.
• 8:88 : Digital Display
- The digital display on the control panel shows the ESTIMATED cycle time. When the cycle and
options are selected, the display shows the total estimated time to complete those selections.
During operation, the display shows the remaining estimated operating time.

NOTE
• The estimated time shown on the display does not include delay times for heating water, etc.
• If Delay Start is selected, the display shows the delay time in hours.
• Cycle time may vary depending on the soil level of your load.

• k, CL : Control Lock
- The Control Lock feature helps prevent settings from being changed during a cycle. Selecting this
feature locks all of the buttons, except for the Power button, on the control panel. This feature
does not lock the door.
- While a cycle is running, press and hold Flex Zone and High Temp. simultaneously for three
seconds to activate or deactivate Control Lock.
- To start a new cycle, deactivate Control Lock.
• a: Machine Clean & Sanitized Icon
- The Machine Clean icon flashes every 30 cycles. To activate or deactivate the icon, press and hold
the Machine Clean and Flex Zone buttons for three seconds.
- If the High Temp. option is added to a cycle, the Machine Clean icon stays lit at the end of the cycle
if the dishes were properly sanitized.
• m: Night Dry
- This indicator lights up when Night Dry is selected.
 OPERATION 25

c Chime On/Off Button

• To activate or deactivate the button sounds, press and hold Cycles and Machine Clean
simultaneously for three seconds. The error alert sound cannot be turned off.

ENGLISH
d Cancel Button
• The drain pump activates and the cycle cancels. Once the dishwasher finishes draining, the power
turns off.
• Press and hold Start for three seconds to activate.

e Start Button
• To operate the machine, either press Start and close the door within four seconds or close the door
and press Start.
• If more than 4 seconds have passed since pressing Start, an alarm will sound when the door is
closed.

Wash Cycles • This cycle does not have drying. Select the Extra
Dry and Night Dry option or another cycle for
Select your desired cycle. better drying.

Selecting the Cycle

The default cycle is Auto. You can also customize Machine Clean
these settings using the Cycles button. This cycle is for cleaning the inside of the
• Press the Cycles button repeatedly to select the dishwasher. Use the cycle without dishes in the
Normal, Heavy, or Turbo cycle. machine. It eliminates residual soils, odor, white
spots, and other dirt. Add citric acid or another
cleaning agent for more effective results.
Auto
This cycle senses the soil amount and soil
toughness and is optimized to achieve the best
cleaning. Options and Extra Functions
Select the desired cycle and then select the options
Normal for that cycle.
This cycle is for daily, regular, or typical use to
completely wash a full load of normally soiled Using the Flexible Zone
dishes. The energy usage label is based on this
cycle without any options. Select the Night Dry This option adjusts the wash intensity to target
option if leaving dishes overnight. Press and hold different zones inside the dishwasher. Set it to
Extra Dry for three seconds to activate Night Dry. wash just the upper rack or lower rack, or set the
intensity to soft for the upper spray arm and
• After the cycle ends, the fan runs for an hour to strong for the lower spray arm.
help vent the warm, moist air in the tub. You can
stop the fan by opening the door after the cycle The Flex Zone is off by default. Press the Flex
ends. Zone button to customize settings.
• Press the Flex Zone button repeatedly to select
Heavy the 4 modes for cleaning the dishes.
This cycle is for heavily soiled dishes and dishes
with hardened on soil. This cycle defaults to the Mode Description
strongest spray intensity and uses it to wash
Small loads & light soil
heavily soiled dishes.
• Use just the upper rack to save
energy and time.
Turbo
This cycle will clean heavily soiled dishes in an hour Small loads & heavy soil
using slightly more energy and water.
• Use just the lower rack to save
energy and time.
26 OPERATION

Mode Description Night Dry

Dishes are often left in the dishwasher overnight
Small loads & heavy soil & light/sensitive
after the cycle ends. This can result in the steam
dishes
inside the tub condensing on dishes, leaving them
• Focus on lower rack, but also wet. This option runs the ventilation fan
operate lightly to wash some light periodically to help vent the steam from the tub.
or sensitive dishes in the upper
• Press and hold Extra Dry for three seconds to
rack.
activate.
Various conditions • The Night Dry option is selected by default for
• Place heavily soiled dishes like all cycles for which it is available, except the
plates and bowls in the lower rack Normal cycle.
and lightly soiled dishes like cups • To add the Night Dry option to the Normal
and small plates in the upper rack to cycle, press and hold Extra Dry for 3 seconds.
get the best results.

Delay Start
High Temp. This feature delays the start of a selected cycle.
Raises the main wash temperature to improve Each time the Delay Start button is pressed, the
cleaning. delay time increases by an hour. The delay time
If the High Temp. option is added to a cycle, the can be set from 1 to 12 hours, in one-hour
increments.
indicator a stays lit at the end of the cycle if the
dishes were properly sanitized. If the dishwasher
could not properly sanitize the dishes because the
High Temp. option was not selected, the cycle was Cycle/Option Guide
interrupted or the water could not be heated to The cycle guide shows the available options for
the required temperature, the indicator will not each cycle.
light up at the end of the cycle. Open and close the
door or press POWER to turn the indicator off. To see the Cycle/Option Guide, refer to the online
owner's manual.

NOTE
• This high temperature rinse sanitizes dishes and
glassware in accordance with the NSF/ANSI
Loading the Dishwasher
Standard 184 for residential dishwashers. For effective washing performance, always follow
Certified residential dishwashers are not these instructions.
intended for use in licensed food
• Remove large particles of food debris from
establishments. Only sanitizing cycles have been
plates including bones before loading.
designed to meet the requirements for soil
removal and sanitization efficacy. There is no • Items with burnt on food should be soaked prior
intention, either directly or indirectly, that all to loading in the dishwasher.
cycles on a certified machine have passed the • Deep pots or dishes should be placed upside
sanitization performance test. down.
• Make sure that all items do not touch each other.

Extra Dry
Select the Extra Dry option for better drying
performance. This option adds extra drying time to
the cycle and raises the heated rinse temperature.
• When the rinse aid is empty, the Extra Dry Non-Dishwasher Safe Items
option is selected automatically.
The combination of high water temperature and
dishwasher detergents may damage certain items.
Do not wash the following items in the dishwasher.
• Copper or anodized aluminum
 OPERATION 27

• Hand painted silver or gold leaf china Loading 12 Place Settings

• Wood or bone handled utensils
5 4 3 4 6 5
• Iron or non-rustproof utensils 1 5 5
4
4
3 2
2
2 3
4
4
5 5 1
2 2
1 5 4 4 6 2 2 6 2 4 4 5 1
• Plastic items which are not dishwasher safe

ENGLISH
• Sterling silver or gold-plated flatware or delicate
or metal-rimmed china
• Fragile items such as crystal glasses

CAUTION
• Do not place pots or pans with plastic handles in
the appliance as the handles may deteriorate
due to the heat and detergent.
• Waterproof or long-lasting lipstick smudges on
glasses may not be removed during the wash.

Silverware Loading Tips:

• For best cleaning results, use the top separators
Loading the Silverware in the basket when loading silverware. The
Basket separators will prevent nesting of silverware.

The silverware basket has separators to avoid • Load sharp items, such as knives, pointing down.
scratching and tarnishing of delicate silverware. • When unloading the dishwasher, it is best to
start with the silverware basket. Doing so will
Loading Silverware into the Basket prevent water droplets from falling on your
silverware from the upper rack.
Loading 10 Place Settings
WARNING
5 4 3 3 3 4 6 5 • Be careful when loading and unloading sharp
5 4 2 2 4 5
1
5
5
4
4 3 2
2
2
2
3 4
4
5
5
1 items. Load sharp knives with the handles up to
6 2 6
5 4 2 2 4 5 reduce the risk of personal injury.

Loading the Lower Rack

Loading Dishes into the Lower Rack

Loading 10 Place Settings

28 OPERATION

Loading 12 Place Settings Loading 12 Place Settings

Lower Rack Loading Tips:

Upper Rack Loading Tips:
For details, refer to the online owner's manual.
For details, refer to the online owner's manual.

Folding Down the Lower Tines

Folding Down the Upper Tines
Fold tines down to fit larger dishes; pull tines back
up to fit smaller dishes. Fold tines down to fit larger dishes; pull tines back
up to fit smaller dishes.
For more details, refer to the online owner's
manual. For more details, refer to the online owner's
manual.

Loading the Upper Rack Height Adjustable Upper Rack

To accommodate larger items, the upper rack can
Loading Dishes into the Upper Rack be adjusted up or down using the buttons on the
left and right sides. The dishwasher ships with the
Loading 10 Place Settings upper rack raised.
For more details, refer to the online owner's
manual.

WARNING
• Before adjusting, ensure the rack is empty of all
dishes. Otherwise dishes may get damaged or
you may get injured.

Adding Cleaning Products

Adding Detergent to the Dispenser
• Remove the label on the dispenser prior to
running the dishwasher for the first time.
• The amount of detergent needed depends on
the cycle, load size, and soil level of dishes.
• Put detergent into the detergent compartment
before starting any cycle, except the Rinse cycle.
 OPERATION 29

• Setting the control too high can cause foaming,

WARNING which will cause poor wash performance.
• Dishwasher detergent and rinse aid contain
chemical components, like all other household
1 Ensure the appliance is off.

ENGLISH
detergent. So, they must be kept out of the
reach of children.

2 Press Power and Delay Start simultaneously

CAUTION to check the current setting.
• Use only detergent intended for dishwashers.
Incorrect detergent may cause the dishwasher
to fill with suds during operation. Excess suds 3 Press Delay Start to change the rinse aid
may reduce wash performance and may cause dispenser setting. Each press of the button
the dishwasher to leak. changes the setting one step from L0 to L4.
• To avoid damaging the dispenser, do not pull up
on the dispenser to close the dishwasher door.
4 Once the desired rinse aid dispenser setting is
selected, press Start to save.

Refilling the Rinse Aid

How often the dispenser needs to be refilled
depends on how often dishes are washed and the
rinse aid setting used.
• The Rinse Aid e icon flashes when more rinse
aid is needed, unless the rinse aid dispenser
setting is set to L0.
For more details, refer to the online owner's
manual.

Adding Rinse Aid to the Dispenser

The Rinse Aid e icon appears in the display when
more rinse aid is needed.
The use of rinse aid is recommended to prevent
water spots on dishes and to enhance drying
performance.
For more details, refer to the online owner's
manual.

Rinse Aid Dispenser Adjustment

The dispenser has five adjustment levels. The
dishwasher is programmed at the factory for a
rinse aid dispenser level of 2. This can be checked
and adjusted from the control panel.

NOTE
• Adjust the setting higher if you have hard water
and notice calcium buildup on your dishes.
• Setting the rinse aid control too low will
contribute to spotting and streaking on dishes
and poor drying performance.
30 SMART FUNCTIONS

SMART FUNCTIONS
LG ThinQ Application
The LG ThinQ application allows you to
communicate with the appliance using a
smartphone.

LG ThinQ Application Features

• Smart Diagnosis
- This function provides useful information for
diagnosing and solving issues with the
appliance based on the pattern of use. Select
Smart Diagnosis in the app and follow the
instructions. For additional information, refer
to the online owner's manual.

Installing the LG ThinQ Application

Search for the LG ThinQ application from the
Google Play Store or Apple App Store on a
smartphone. Follow instructions to download and
install the application.
 MAINTENANCE 31

MAINTENANCE
To maintain performance and prevent trouble, it is important to check the outside and inside of the
dishwasher, including filters and spray arms, at regular intervals.

ENGLISH
WARNING
• When cleaning the outside and inside of the dishwasher, do not use benzene or thinner. Otherwise, it
may cause fire or explosion.
• To prevent injury during care and maintenance or cleaning, wear gloves and/or protective clothing.

Cleaning and Care 1 Remove all dishes from the appliance.

Cleaning the Exterior

2 Add 3 tbsp. (40 g) of citric acid to the
• Do not use scrub pads or abrasive cleaners on
detergent dispenser or follow the
the exterior of the dishwasher.
manufacturer’s instructions if using a
• Most soil can be removed using a soft, damp dishwasher cleaning agent. Do not use
cloth or sponge. A mild soap can be used to help dishwasher detergent.
release stubborn soil. Rinse and wipe dry with a
soft cloth after cleaning.
• Stainless steel surfaces can be polished using a 3 Press Machine Clean to select the Machine
stainless steel cleaner. Follow the instructions on Clean cycle.
the cleaner, and wipe in the direction of the
grain.
4 Press Start.
CAUTION
• If cooking oil is spilled on the exterior of the NOTE
product, wipe it off immediately. Do not clean • Run the Machine Clean cycle once a month, or
the exterior of the product with cleaners which more often if needed, to remove detergent
contain alcohol, thinners, bleach, benzene, buildup and other residue.
flammable liquids, or abrasives. These
substances may discolor or damage the • If you have not used the dishwasher for a long
appliance. time, refresh the inside by running the Machine
Clean cycle without detergent. When the cycle is
finished, clean the inside and outside of the
dishwasher according to the MAINTENANCE
instructions.
Cleaning the Interior
• Clean the interior of the dishwasher periodically
with a soft, damp cloth or sponge to remove
food and dirt particles. Clogged Drain Air Gap or In-Sink
• To remove white spots and odor from inside the Disposal
dishwasher, run an empty cycle, without
Check the drain air gap or in-sink disposal if the
detergent, with one cup of white vinegar in a
dishwasher is not draining well.
dishwasher safe glass or bowl placed on the
upper rack. (Vinegar is an acid and with constant
use it could damage the appliance.) NOTE
• Using Machine Clean • The drain air gap and disposal are external
plumbing devices that are not part of the
- Run the Machine Clean cycle once a month or dishwasher.
after every 30 cycles to eliminate residual soil,
odor, white spots and other dirt inside the
appliance.
32 MAINTENANCE

NOTE NOTE
• The warranty provided with the dishwasher does • For best wash performance, clean the filter after
not cover service costs directly associated with each load. If food debris remains in the filter, it
the cleaning or repair of the external drain air may cause an odor.
gap and disposal. • In areas with hard water, clean the filter at least
once a month with a soft brush.
• Clean the filters using non-abrasive materials
Cleaning the Air Gap
and warm running water.

1 Turn off the dishwasher.

1 Remove the lower rack and position the
bottom spray arm so a wider vee is open to
2 Remove the air gap cover and the plastic cap the front.
underneath it.

2 Turn the inner filter counter-clockwise and

take out the assembled inner filter and
stainless steel filter.
With the filters removed, check the sump
opening and remove any foreign materials, if
needed.

3 Clean out any debris with a toothpick or

brush.

3 Clean the filters with a soft brush under

running water. Reassemble the filters before
4 Replace the plastic cap and air gap cover. reinstalling them.

Cleaning the Filters

WARNING 4 To replace the assembled filters, position the

• Be cautious of sharp edges when handling the spray arm so the wider vee is toward the
stainless steel filter. front. Fit the filters back into the filter holder
and secure them by turning the inner filter
clockwise until it clicks into place.
CAUTION
• Remove food residue caught in filters to prevent
the buildup of odor-causing bacteria and
possible drainage problems.
 MAINTENANCE 33

Cleaning the Spray Arm

If the spray arm holes are blocked by any food
residue, dishes may not be cleaned well due to
improper water spray.

ENGLISH
It is recommended that the spray arms be cleaned
once every two weeks.

Cleaning the Lower Spray Arm

1 Make sure that the water jet holes are not

NOTE blocked by food particles.
• Make sure the filter is assembled correctly
before starting a cycle. When assembling, rotate
the filter firmly until it clicks. 2 If any food residue blocks the spray arm
holes, remove it with a pin or piece of stiff
wire.

Recommended Filter Cleaning

Schedule

If you scrape CAUTION

Number of If you wash
and rinse • To avoid breaking the rolling spray arm sections,
Loads Per dishes before
dishes before do not pull or manually rotate them.
Week loading
loading

1-3
Once a year Cleaning the Upper Spray Arm
4-7
Every 6 months
8 - 12
1 Pull the upper rack forward. Make sure that
Every 6 months the water jet holes are not blocked by food
13 - 14 particles.

If you do not
Number of
If you only
scrape or
2 When cleaning is necessary, remove the
scrape dishes upper spray arm by turning the nut on the
Loads Per rinse dishes
before bottom of the spray arm 1/8 turn counter-
Week before
loading clockwise and pulling down.
loading

1-3 Once a month

Four times a Twice a
4-7 year month(every
15 days)

8 - 12 Every 1.5 Every week

13 - 14 months Twice a week

34 MAINTENANCE

3 Remove food particles by rinsing or shaking

the spray arm.

4 If any food residue blocks the spray arm

holes, remove it with a pin or any sharp tool.

5 After removing the food residue, clean the

spray arms under running water.

6 After cleaning the upper spray arm, press it

up into place. Turn the nut 1/8 turn clockwise
to make sure that the nut locks back into
place.

7 After assembly, make sure that the spray

arms rotate freely.

Seasonal Maintenance and Storage

• If you will be absent for an extended period of
time during warmer months, close the water
valve and disconnect the power supply line, or
turn off the circuit breaker. Clean the filter, tub
and dispenser to prevent odor.
• If you will be absent for an extended period of
time during colder months and there is a
possibility of freezing temperatures, winterize
the water supply lines and the dishwasher itself.
Winterization must be performed by qualified
service personnel.
 TROUBLESHOOTING 35

TROUBLESHOOTING
The washer is equipped with an automatic error-monitoring system to detect and diagnose problems at an
early stage. If the washer does not function properly or does not function at all, check the following before

ENGLISH
you call for service.

Before Calling for Service

For more troubleshooting, refer to the online owner's manual.

User Support Videos

For further assistance, there are videos and tutorials available through the LG.com website.

1 On the www.lg.com home page, click on the Support menu tab to bring up the menu selections.
Select Video Tutorials.

2 Select a product category and then pick a topic or search a keyword.

NOTE
• Scan this QR code to quickly access the video search page on the LG website.

Error Messages
Problem Possible Cause & Solution

IE Water inlet problem.

• Check for a clogged, kinked or frozen water inlet hose.
• Check water supply.

OE Drainage Problem.
• Check for a clogged, kinked or frozen water drain hose.

Air gap or disposal is clogged.

• Clean air gap or disposal.
Filters are clogged.
• Clean filters.
36 TROUBLESHOOTING

Problem Possible Cause & Solution

bE Oversudsing caused by improper detergent, such as liquid dish soap.

• Do not use hand dishwashing liquids. Only use detergents which are designed for use in
automatic dishwashers.
• A bE error can appear if dishes soiled with a lot of foamy food, such as whipped cream, are
loaded in the appliance. To clear the error, turn the appliance off and start a new cycle.
• To remove detergent residue in the tub, pour approximately 4 oz ~ 8 oz (100 ml ~ 200 ml)
of milk into a shallow bowl, place it in the upper rack and then run the appliance on the
Auto cycle.

Failure to level dishwasher.

• Make sure that the appliance is properly leveled.

AE Water leakage
• Turn off the water supply to the dishwasher and call an LG Electronics Customer
Information Center at 1-800-243-0000 (U.S.A.) or 1-888-542-2623 (Canada).
• The dishwasher makes an alert sound for 10 seconds, and runs the drain pump
intermittently. If power is turned off to the machine, the machine powers back on
automatically until the AE error is resolved.

FE Excessive Water supplied.

• Please call an LG Electronics Customer Information Center at 1-800-243-0000 (U.S.A.) 1-
888-542-2623 (Canada).

HE Heater circuit failure.

• Please call an LG Electronics Customer Information Center at 1-800-243-0000 (U.S.A.) 1-
888-542-2623 (Canada).

tE Water temperature sensor error

• Please call an LG Electronics Customer Information Center at 1-800-243-0000 (U.S.A.) 1-
888-542-2623 (Canada).

LE Wash motor error

• Please call an LG Electronics Customer Information Center at 1-800-243-0000 (U.S.A.) 1-
888-542-2623 (Canada).

NE Vario motor error

• Please call an LG Electronics Customer Information Center at 1-800-243-0000 (U.S.A.) 1-
888-542-2623 (Canada).

N:#, U:#, d:#, t# Test mode is selected.

(# is a number.) • This is not an error code. This code is used when testing the dishwasher. Power the unit off
and on and the code will disappear.

LO, L1, Lz, L3, L4 Rinse aid level setting mode is selected.
• This is not an error code. This code indicates the current rinse aid level. For more
information, refer to the Adding Cleaning Products section.

CL Control Lock is activated.

• This is not an error code. This code indicates that the control lock is activated. Press and
hold Flex Zone and High Temp. buttons simultaneously for three seconds.
 LIMITED WARRANTY 37

LIMITED WARRANTY
USA

ENGLISH
TERMS AND CONDITIONS
ARBITRATION NOTICE: THIS LIMITED WARRANTY CONTAINS AN ARBITRATION PROVISION THAT
REQUIRES YOU AND LG ELECTRONICS (“LG”) TO RESOLVE DISPUTES BY BINDING ARBITRATION
INSTEAD OF IN COURT, UNLESS YOU CHOOSE TO OPT OUT. IN ARBITRATION, CLASS ACTIONS AND
JURY TRIALS ARE NOT PERMITTED. PLEASE SEE THE SECTION TITLED “PROCEDURE FOR RESOLVING
DISPUTES” BELOW.
Should your LG Dishwasher (“Product”) fail due to a defect in materials or workmanship under normal and
proper use, during the warranty period set forth below, LG will, at its option, repair or replace the Product.
This limited warranty is valid only to the original retail purchaser of the Product (“You”) and applies only
when purchased lawfully and used within the United States including U.S. Territories.

Scope of
Warranty Period HOW SERVICE IS HANDLED
Warranty

One (1) year from date of original retail Labor / Parts LG will also provide, free of charge, all
purchase labor and on-site service to replace the
defective part.

Two (2) years from date of original retail Main control Main control board, dishwasher racks,
purchase †
board / Racks / stainless steel door liner, tub. Customer
Stainless Steel Door will be responsible for any labor or in-
Liner / Tub home service to replace defective parts.

Ten (10) years from date of original retail Direct Drive Motor Direct Drive motor. Customer will be
purchase responsible for any labor or in-home
service to replace defective parts.

† Main control board is located on the bottom right of the dishwasher when viewed from the front.

• Replacement Products and parts are warranted for the remaining portion of the original warranty period
or ninety (90) days, whichever is greater.
• Replacement Products and parts may be new, reconditioned, refurbished, or otherwise factory
remanufactured.
• Replaced Product or part(s) will be the property of LG.
• Proof of original retail purchase specifying the Product model and date of purchase is required to obtain
warranty service under this limited warranty.
EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THE PRODUCT IS LIMITED IN
DURATION TO THE DURATION OF THE ABOVE LIMITED WARRANTY. UNDER NO CIRCUMSTANCES
SHALL LG OR ITS U.S. DISTRIBUTORS/DEALERS BE LIABLE FOR ANY INDIRECT, INCIDENTAL,
CONSEQUENTIAL, SPECIAL, OR PUNITIVE DAMAGES, INCLUDING, WITHOUT LIMITATION, LOST
GOODWILL, LOST REVENUES OR PROFITS, WORK STOPPAGE, IMPAIRMENT OF OTHER GOODS, COST OF
REMOVAL AND REINSTALLATION OF THE PRODUCT, LOSS OF USE, OR ANY OTHER DAMAGES WHETHER
BASED IN CONTRACT, TORT, OR OTHERWISE. LG’S TOTAL LIABILITY, IF ANY, SHALL NOT EXCEED THE
PURCHASE PRICE PAID BY YOU FOR THE PRODUCT.
SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES OR LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE
EXCLUSIONS OR LIMITATIONS MAY NOT APPLY TO YOU. THIS LIMITED WARRANTY GIVES YOU
SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE.
38 LIMITED WARRANTY

THIS LIMITED WARRANTY DOES NOT COVER:

• Service trips to deliver, pick up, or install, educate how to operate, correct wiring, or correct
unauthorized repairs.
• Damage or failure of the Product to perform during power failures and interrupted or inadequate
electrical service.
• Damage or failure of the Product caused by leaky or broken water pipes, frozen water pipes, restricted
drain lines, inadequate or interrupted water supply or inadequate supply of air.
• Damage or failure of the Product resulting from operating the Product in a corrosive atmosphere or
contrary to the Product owner’s manual.
• Damage or failure of the Product caused by accidents, pests and vermin, lightning, wind, fire, floods, acts
of nature, or any other causes beyond the control of LG.
• Damage or failure of the Product caused by unauthorized modification or alteration, or if the Product is
used for other than the intended purpose, or any water leakage where the Product was not properly
installed.
• Damage or failure of the Product caused by incorrect electrical current, voltage, or plumbing codes.
• Damage or failure of the Product caused by transportation, storage, and/or handling, including
scratches, dents, chips, and/or other damage to the finish of the Product, unless such damage is
reported within one (1) week of delivery.
• Damage or failure of the Product resulting from misuse, abuse, improper installation, repair, or
maintenance. Improper repair includes the use of parts not authorized by LG. Improper installation or
maintenance includes installation or maintenance contrary to the Product owner’s manual.
• Damage or failure of the Product caused by the use of parts, components, accessories, consumable
cleaning products, or any other products or services that were not authorized by LG.
• Damage or missing items to any display or open box Product.
• Refurbished Product or any Product sold “As Is”, “Where Is”, “With all Faults”, or similar disclaimer.
• Products with original serial numbers that have been removed, altered, or cannot be readily determined.
• Increases in utility costs and additional utility expenses.
• Any noises associated with normal operation.
• Products used for other than normal and proper household use (e.g., commercial or industrial use) or
contrary to the Product owner’s manual.
• Costs associated with removal and reinstallation of the Product for repairs, or the removal and
reinstallation of the Product if it is installed in an inaccessible location or not installed in accordance with
the Product Owner's manual.
• Accessories, removable components, or consumable parts (e.g. Shelves, door bins, drawers, water/air
filters, racks, light bulbs, batteries, etc., as applicable), except for internal/functional parts covered under
this limited warranty.
The cost of repair or replacement under these excluded circumstances shall be borne by You.
TO OBTAIN WARRANTY SERVICE AND ADDITIONAL INFORMATION
Call 1-800-243-0000 and select the appropriate option from the menu.
Or visit our website at http://www.lg.com.
Or by mail: LG Electronics Customer Service P.O. Box 240007 Huntsville, AL 35813 ATTN: CIC

PROCEDURE FOR RESOLVING DISPUTES:

ALL DISPUTES BETWEEN YOU AND LG ARISING OUT OF OR RELATING IN ANY WAY TO THIS LIMITED
WARRANTY OR THE PRODUCT SHALL BE RESOLVED EXCLUSIVELY THROUGH BINDING ARBITRATION, AND
NOT IN A COURT OF GENERAL JURISDICTION. BINDING ARBITRATION MEANS THAT YOU AND LG ARE EACH
WAIVING THE RIGHT TO A JURY TRIAL AND TO BRING OR PARTICIPATE IN A CLASS ACTION.
Definitions. For the purposes of this section, references to “LG” mean LG Electronics U.S.A., Inc., its
parents, subsidiaries and affiliates, and each of their officers, directors, employees, agents, beneficiaries,
 LIMITED WARRANTY 39

predecessors in interest, successors, assigns and suppliers; references to “dispute” or “claim” shall include
any dispute, claim or controversy of any kind whatsoever (whether based in contract, tort, statute,
regulation, ordinance, fraud, misrepresentation or any other legal or equitable theory) arising out of or
relating in any way to the sale, condition or performance of the product or this Limited Warranty.

ENGLISH
Notice of Dispute. In the event you intend to commence an arbitration proceeding, you must first notify
LG in writing at least 30 days in advance of initiating the arbitration by sending a letter to LG at LG
Electronics, USA, Inc. Attn: Legal Department- Arbitration 111 Sylvan Avenue, Englewood Cliffs, NJ 07632.
You and LG agree to engage in good faith discussions in an attempt to amicably resolve your claim. The
notice must provide your name, address, and telephone number; identify the product that is the subject of
the claim; and describe the nature of the claim and the relief being sought. If you and LG are unable to
resolve the dispute within 30 days, either party may proceed to file a claim for arbitration.
Agreement to Binding Arbitration and Class Action Waiver. Upon failure to resolve the dispute during
the 30 day period after sending written notice to LG, you and LG agree to resolve any claims between us
only by binding arbitration on an individual basis, unless you opt out as provided below. Any dispute
between you and LG shall not be combined or consolidated with a dispute involving any other person’s or
entity’s product or claim. More specifically, without limitation of the foregoing, any dispute between you
and LG shall not under any circumstances proceed as part of a class or representative action. Instead of
arbitration, either party may bring an individual action in small claims court, but that small claims court
action may not be brought on a class or representative basis.
Arbitration Rules and Procedures. To begin arbitration of a claim, either you or LG must make a written
demand for arbitration. The arbitration will be administered by the American Arbitration Association
(“AAA”) and will be conducted before a single arbitrator under the AAA’s Consumer Arbitration Rules that
are in effect at the time the arbitration is initiated (referred to as the “AAA Rules”) and under the
procedures set forth in this section. The AAA Rules are available online at www.adr.org/consumer. Send a
copy of your written demand for arbitration, as well as a copy of this provision, to the AAA in the manner
described in the AAA Rules. You must also send a copy of your written demand to LG at LG Electronics,
USA, Inc. Attn: Legal Department- Arbitration 111 Sylvan Avenue, Englewood Cliffs, NJ 07632. If there is a
conflict between the AAA Rules and the rules set forth in this section, the rules set forth in this section will
govern. This arbitration provision is governed by the Federal Arbitration Act. Judgment may be entered on
the arbitrator’s award in any court of competent jurisdiction. All issues are for the arbitrator to decide,
except that issues relating to the scope and enforceability of the arbitration provision and to the
arbitrability of the dispute are for the court to decide. The arbitrator is bound by the terms of this
provision.
Governing Law. The law of the state of your residence shall govern this Limited Warranty and any
disputes between us except to the extent that such law is preempted by or inconsistent with applicable
federal law.
Fees/Costs. You do not need to pay any fee to begin an arbitration. Upon receipt of your written demand
for arbitration, LG will promptly pay all arbitration filing fees to the AAA unless you seek more than $25,000
in damages, in which case the payment of these fees will be governed by the AAA Rules. Except as
otherwise provided for herein, LG will pay all AAA filing, administration and arbitrator fees for any
arbitration initiated in accordance with the AAA Rules and this arbitration provision. If you prevail in the
arbitration, LG will pay your attorneys’ fees and expenses as long as they are reasonable, by considering
factors including, but not limited to, the purchase amount and claim amount. Notwithstanding the
foregoing, if applicable law allows for an award of reasonable attorneys’ fees and expenses, an arbitrator
can award them to the same extent that a court would. If the arbitrator finds either the substance of your
claim or the relief sought in the demand is frivolous or brought for an improper purpose (as measured by
the standards set forth in Federal Rule of Civil Procedure 11(b)), then the payment of all arbitration fees will
be governed by the AAA Rules. In such a situation, you agree to reimburse LG for all monies previously
disbursed by it that are otherwise your obligation to pay under the AAA Rules. Except as otherwise
provided for, LG waives any rights it may have to seek attorneys’ fees and expenses from you if LG prevails
in the arbitration.
Hearings and Location. If your claim is for $25,000 or less, you may choose to have the arbitration
conducted solely on the basis of (1) documents submitted to the arbitrator, (2) through a telephonic
hearing, or (3) by an in-person hearing as established by the AAA Rules. If your claim exceeds $25,000, the
right to a hearing will be determined by the AAA Rules. Any in-person arbitration hearings will be held at a
location within the federal judicial district in which you reside unless we both agree to another location or
we agree to a telephonic arbitration.
40 LIMITED WARRANTY

Opt Out. You may opt out of this dispute resolution procedure. If you opt out, neither you nor LG can
require the other to participate in an arbitration proceeding. To opt out, you must send notice to LG no
later than 30 calendar days from the date of the first consumer purchaser’s purchase of the product by
either: (i) sending an e-mail to optout@lge.com, with the subject line: “Arbitration Opt Out” or (ii) calling 1-
800-980-2973. You must include in the opt out e-mail or provide by telephone: (a) your name and address;
(b) the date on which the product was purchased; (c) the product model name or model number; and (d)
the serial number (the serial number can be found (i) on the product; or (ii) online by accessing https://
www.lg.com/us/support/repair-service/schedule-repair-continued and clicking on “Find My Model & Serial
Number”).
You may only opt out of the dispute resolution procedure in the manner described above (that is, by e-mail
or telephone); no other form of notice will be effective to opt out of this dispute resolution procedure.
Opting out of this dispute resolution procedure will not affect the coverage of the Limited Warranty in any
way, and you will continue to enjoy the full benefits of the Limited Warranty. If you keep this product and
do not opt out, then you accept all terms and conditions of the arbitration provision described above.

Warranty Exceptions

Poor wash results caused by

Clean the filter regularly.
debris remaining in the filter.

Make certain that no dishes or

Poor wash results caused by
utensils are in the path of the
improper loading or over stacking:
spray arms.
wash arm won't rotate or soap
Do not place one dish on top of
dispenser is held closed.
another.

Poor drying results caused by lack Use rinse aid or combination

of rinse aid. detergent.

Water is not supplied because the

water tap is not turned on. Check and turn on the water tap.
IE error

Water is not supplied because the

inlet hose is kinked. Reinstall the inlet hose.
IE error

Not draining because drain hose is

kinked. Reinstall the drain hose.
OE error

The knockout plug in the garbage

disposal is not removed. Remove the plug on the disposal.
OE error
 LIMITED WARRANTY 41

The disposal or air gap is blocked

by debris. Clean the disposal or the air gap.
OE error

ENGLISH
Inlet valve and drain hose
connection problem caused by
Reinstall the hose.
improper installation.
External leakage

Door movement or closing

Adjust the lower front leveling feet
compromised by incorrect
to the required height.
leveling.

No power due to loose connection

Reconnect the power supply line
of power supply line or electrical
or repair the electrical outlet.
outlet problem.

Pick-up, electrical wiring,

You will be charged for the
plumbing.
installation.
Installation
42 Memo
Memo 43
LG Customer Information Center

For inquiries or comments,

visit www.lg.com or call:
1-800-243-0000 U.S.A.

1-888-542-2623 CANADA

Register your product Online!

www.lg.com