Control Systems - Introduction

9/12/23, 4:02 PM Control Systems - Introduction
Control Systems - Introduction
A control system is a system, which provides the desired response by controlling the output.
The following figure shows the simple block diagram of a control system.
Here, the control system is represented by a single block. Since, the output is controlled by
varying input, the control system got this name. We will vary this input with some mechanism.
In the next section on open loop and closed loop control systems, we will study in detail about
the blocks inside the control system and how to vary this input in order to get the desired
response.
Examples − Traffic lights control system, washing machine
Traffic lights control system is an example of control system. Here, a sequence of input signal is
applied to this control system and the output is one of the three lights that will be on for some
duration of time. During this time, the other two lights will be off. Based on the traffic study at a
particular junction, the on and off times of the lights can be determined. Accordingly, the input
signal controls the output. So, the traffic lights control system operates on time basis.
Classification of Control Systems

Based on some parameters, we can classify the control systems into the following ways.
Continuous time and Discrete-time Control Systems

Control Systems can be classified as continuous time control systems and discrete time
control systems based on the type of the signal used.
In continuous time control systems, all the signals are continuous in time. But, in discrete
time control systems, there exists one or more discrete time signals.
https://www.tutorialspoint.com/control_systems/control_systems_introduction.htm 1/3
SISO and MIMO Control Systems

Control Systems can be classified as SISO control systems and MIMO control systems
based on the number of inputs and outputs present.
SISO (Single Input and Single Output) control systems have one input and one output.
Whereas, MIMO (Multiple Inputs and Multiple Outputs) control systems have more than
one input and more than one output.
Open Loop and Closed Loop Control Systems

Control Systems can be classified as open loop control systems and closed loop control
systems based on the feedback path.
In open loop control systems, output is not fed-back to the input. So, the control action is
independent of the desired output.
The following figure shows the block diagram of the open loop control system.
Here, an input is applied to a controller and it produces an actuating signal or controlling signal.
This signal is given as an input to a plant or process which is to be controlled. So, the plant
produces an output, which is controlled. The traffic lights control system which we discussed
earlier is an example of an open loop control system.
In closed loop control systems, output is fed back to the input. So, the control action is
dependent on the desired output.
The following figure shows the block diagram of negative feedback closed loop control system.
The error detector produces an error signal, which is the difference between the input and the
feedback signal. This feedback signal is obtained from the block (feedback elements) by
considering the output of the overall system as an input to this block. Instead of the direct input,
the error signal is applied as an input to a controller.
So, the controller produces an actuating signal which controls the plant. In this combination, the
output of the control system is adjusted automatically till we get the desired response. Hence,
the closed loop control systems are also called the automatic control systems. Traffic lights
control system having sensor at the input is an example of a closed loop control system.
The differences between the open loop and the closed loop control systems are mentioned in
the following table.
Open Loop Control Systems Closed Loop Control Systems
Control action is independent of the desired Control action is dependent of the desired
output. output.
Feedback path is not present. Feedback path is present.
These are also called as non-feedback control These are also called as feedback control
systems. systems.
Easy to design. Difficult to design.
These are economical. These are costlier.
Inaccurate. Accurate.

Control Systems - Introduction

Uploaded by

Control Systems - Introduction

Uploaded by

9/12/23, 4:02 PM Control Systems - Introduction

Control Systems - Introduction

Examples − Traffic lights control system, washing machine

Classification of Control Systems

Continuous time and Discrete-time Control Systems

SISO and MIMO Control Systems

Open Loop and Closed Loop Control Systems

Open Loop Control Systems Closed Loop Control Systems

Feedback path is not present. Feedback path is present.

Easy to design. Difficult to design.

These are economical. These are costlier.

You might also like