Black plate (161,1)

User’s Manual

(AGC-3220YF)

SAA3476
Type A (with MUTE button)
1. MUTE button 11. VOLUME control knob/POWER ON/OFF button
2. FM·AM band select button 12. TA (Traffic Announcement) button
3. RPT (Repeat) button 13. Rewind button
4. MIX (Mix play) button 14. Fast Forward button
5. Radio memory buttons 15. SETUP button
6. DISP (Display) button 16. BACK button
7. Quick search button 17. TUNE/MENU knob/ENTER button
8. AUX button 18. PHONE button
9. CD EJECT button
10. CD button

Model "AGC-3220YF: 2010/ 12/ 13

 Black plate (162,1)

FM-AM RADIO WITH COMPACT DISC

(CD) PLAYER (for Europe, Russia and
Ukraine)
N04AE19
Anti-theft system (with personal code)
N04AE1901
By using a personal 4-digit code known only to
the vehicle owner, the possibility of the audio
unit being stolen is effectively reduced, because
without the code, the unit can not be activated.
When used normally, the unit is unlocked and
accessible in the usual way.
If however, force is used to try and remove the
unit, the anti-theft system activates and the unit
locks. The only way it can be unlocked is by
entering the personal code number known only
by the owner. This code number cannot be
altered and applies only to your vehicle. This
code number is shown on a radio pass card. Ask
your NISSAN dealer for the location of your
radio pass card.
WARNING:
Keep the radio pass card in a safe place
SAA3642 and refrain from keeping it in the vehicle.
Type B (with DAY/NIGHT button)
1. DAY/NIGHT button 11. VOLUME control knob/POWER ON/OFF button Contact your NISSAN dealer if you lose the
2. FM·AM band select button 12. TA (Traffic Announcement) button radio pass card or forget the code number
3. RPT (Repeat) button 13. Rewind button of your radio.
4. MIX (Mix play) button 14. Fast Forward button Unlocking the unit:
5. Radio memory buttons 15. SETUP button N04AE190101

6. DISP (Display) button 16. BACK button CAUTION:

7. Quick search button 17. TUNE/MENU knob/ENTER button Read this section very carefully. It is
8. AUX button 18. PHONE button important that the instructions are fol-
9. CD EJECT button lowed precisely.
10. CD button

Model "AGC-3220YF: 2010/ 12/ 13

 Black plate (163,1)

If the battery supply to the vehicle is interrupted button to return to the entry screen and Turn the VOLUME control dial counterclockwise
by accident for some reason, the unit will lock. enter the correct radio code. to make the sound quieter.
To unlock the unit, proceed as follows: — If the wrong code is entered after the third SETUP button:
attempt, the audio unit will lock for 60 N04AE190217
1. Turn the ignition switch to the “ACC” or minutes. The display will show a count down To configure Audio, Clock, Bluetooth, Language
“ON” position. timer from 60 to 0 (minutes). After 60 or Scroll direction settings, perform the following
minutes enter the correct radio code. procedure:
2. Turn on the audio unit by pushing the
POWER ON/OFF button. — If the wrong code is entered after eight sets 1. Push the SETUP button.
3. Radio Code is displayed along with four of three entries, the audio unit will lock 2. Push the ENTER button.
numerical zero digits. permanently. Contact a NISSAN dealer for
further details. 3. Turn the TUNE/MENU knob clockwise or
4. Push preset button *1 the number of times counterclockwise, the display will appear in
corresponding with the first digit of the Audio main operation the following order:
N04AE1902
radio code. The audio system operates when the ignition Audio Û Clock Û Bluetooth Û Language
switch is in the “ACC” or “ON” position.
For example, if the radio code is 5169: for Û Scroll Direction
the first digit, “5”, push the preset button *1 POWER ON/OFF button:
five times. N04AE190201
After the desired levels have been set, push
To turn on the audio system, push the POWER either the BACK button repeatedly, the SETUP
5. The second, third, and fourth digits of the ON/OFF button. button, or wait for 8 seconds without pushing
radio code must be entered, in the same any buttons to exit the menu screen.
way, only now using preset buttons *2 , *3 , ● The system will turn on in the mode, (radio or
and *4 . CD) which was used immediately before the Audio adjustments:
N04AE190207
system was turned off.
For example, push *2 once, *3 six times, Push the SETUP button to enter the setup menu
and *4 nine times. ● If there is no CD loaded, the radio will be screen then select Audio.
turned on.
6. Push and hold preset button *6 to confirm Each time the ENTER button is pushed, the
the code. If you entered the code correctly To turn off the audio system, push the POWER mode will change as follows:
the unit will switch on. ON/OFF button.
Bass ? Treble ? Balance ? Fade ? AUX VOL
7. If the code is entered incorrectly a notifica- Volume control: ? SPD VOL ? Audio (setup menu screen) ?
tion message (INCORRECT PIN) and the
N04AE190202 Bass
To control the volume, turn the VOLUME control
number of attempts left (REMAINING dial. Turn the TUNE/MENU knob clockwise or
TRIES: XX) will be shown. counterclockwise to adjust the following items
Turn the VOLUME control dial clockwise to and push ENTER to confirm.
After reading the message, push the ENTER make the sound louder.

Model "AGC-3220YF: 2010/ 12/ 13

 Black plate (164,1)

Bass control: Turn the TUNE/MENU knob, the mode will Language setting:
change as follows: N04AE190219
Use this control to enhance or attenuate bass Push the SETUP button to enter the setup menu
response sound. Set Time Û ON/OFF Û Clock Format Û Set screen then select Language.
time
Treble control: Select the appropriate language and push the
Set Time: ENTER button. Upon completion, the screen will
Use this control to enhance or attenuate the automatically adapt the language setting.
treble. Select Set Time then adjust the clock as follows:
● Frenc
Balance control: The hour display will start flashing. Turn the
h
TUNE/MENU knob to adjust the hour and push
Use this control to adjust the balance of the the ENTER button. The minute display will start ● Englis
volume between the left and right speakers. flashing. Turn the TUNE/MENU knob to adjust h
Fade (Fader) control: the minute and push the ENTER button to finish
the clock adjustment. ● Germa
Use this control to adjust the balance of the n
volume between the front and rear (if equipped) ON/OFF
speakers. ● Spanish
Set the clock display between on or off when the
AUX VOL (Auxiliary volume) control: audio unit is turned off. If set in the ON position, ● Portuguese
the clock will be displayed when the audio unit is ● Italian
Use this control to adjust the volume output from turned off either by pushing the POWER ON/
the auxiliary source. OFF button or when the ignition switch is placed ● Dutch
SPD VOL (Speed volume) control: in the “OFF” position.
● Turkish
This mode controls the volume output from the Clock Format:
● Russia
speakers automatically in relation to vehicle Switch the clock display between 24-hour mode n
speed. and 12-hour clock mode.
Scroll direction:
Adjusting the setting to 0 (zero) turns off the Bluetooth setting: N04AE190220
speed volume feature. Set the scrolling behavior of the TUNE/MENU
Refer to “n04ae50BLUETOOTH OPERATION”
®
knob to scroll UP or DOWN.
Clock setting: later in this section and “n04bjBLUETOOTH®
N04AE190221
MOBILE PHONE FEATURE (if equipped for Display brightness (Day/Night mode):
Push the SETUP button to enter the setup menu N04AE190218
screen then select Clock. models without navigation system)” later For Type A:
in this section.
Push and hold the SETUP button to switch the
display brightness between the daytime and
nighttime mode.
For Type B:
Push DAY/NIGHT button to switch the display

Model "AGC-3220YF: 2010/ 12/ 13

 Black plate (165,1)

brightness between the daytime and nighttime ● The audio unit will automatically detect
modes. if a CD containing MP3/WMA files is
inserted, and [MP3CD] will be indi-
Mute button (for Type A): cated.
N04AE190209
Push the MUTE button to mute the audio ● An error notification message will be
system, and MUTE appears on the display. To displayed when inserting an incompa-
unmute, use any one of the following options: tible disc type (e.g. DVD), or if the
player cannot read the CD. Eject the
— Push the MUTE button again. disc and insert another disc.
— Turn the MENU/VOL dial. List view:
N04AE190327
— Push the CD or FM·AM button. While the track is being played, push either the
— Push the AUX button. ENTER or BACK button to display the available
SAA3643
tracks in a listed view mode. To select a track
from the list, or a track to start listening to, turn
AUX button: CD player operation the MENU select knob then push ENTER.
N04AE190216 N04AE1903
Push the AUX button to play a compatible The audio system operates when the ignition Quick search:
device when it is connected. switch is in the “ACC” or “ON” position. N04AE190328
In the list view mode, a quick search can be
Loading: N04AE190301 performed to find a track from the list. Push the
Insert a CD into the slot with the label side A-Z *6 (Quick search) button, turn the MENU
facing up. The CD will be guided automatically select knob dial to the first alphabetic letter of
into the slot and will start playing. After loading the song title and then push ENTER. When
the disc, track information will be displayed. found, a list of the available songs will be
displayed. Select, and push ENTER to play the
CAUTION: preferred track.
Do not force the CD into the slot. This
could damage the player. CD button:
N04AE190312
After loading the CD, the number of tracks and When the button is pushed while the audio
the playtime will appear on the display. system is off and a CD is loaded, the audio
system will turn on and a CD will start playing
NOTE: automatically. If the radio or AUX source mode is
● The CD player accepts normal audio already playing, it will automatically turn off and
CDs or CDs containing MP3/WMA files. the CD will start playing.

Model "AGC-3220YF: 2010/ 12/ 13

 Black plate (166,1)

However, if the CD is not loaded, then a ENTER again to start playing the first track CD:
notification message will be displayed and the or turn the MENU select knob, and push
audio unit will remain in the radio or AUX source ENTER to select another track. Track time ? Artist ? Song ? Album ? Track
mode. time
If the current selected folder contains sub
folders, push ENTER, a new screen with a list CD with MP3/WMA:
Fast Forward, Fast Rewind of sub folders will be displayed. Turn the TUNE/ Track time ? Artist ? Album ? Folder name ?
buttons: MENU knob for the sub folder then push ENTER Track time
N04AE190306 to select. Select the root folder item when songs
Push and hold the or button to fast- are recorded additionally in the root folder. Track details:
forward or rewind through the track. When the
button is released, the track will play at normal To return to the previous folder screen, push Pushing and holding the button will turn the
playing speed. BACK. display into a detailed overview and after a few
seconds it returns to the main display, or push
Track up/down: button: briefly.
N04AE190309
Pushing the or button once, the track Push the RPT button and the current track will
will skip forward to the next track or backward to be played continuously. CD EJECT button:
N04AE190305
the beginning of the current track. Push the
When the button is pushed while a CD is
or button more than once to skip through loaded, the CD will be ejected.
the tracks. button:
N04AE190324
Push the MIX button and all the tracks will be When the button is pushed twice, the CD
Folder browsing: played in a random order. will be ejected further, and the CD can be
If the recorded media contains folders with removed with ease.
music files, pushing the or button will button:
play in sequence the tracks of each folder. N04AE190308 When the ignition switch is in the “OFF” or
While a CD with recorded music information “LOCK” position it is possible to eject the CD
To select a preferred folder: tags (CD-text/ID3-text tags) is being played, the currently being played. However the audio unit
title of the played track is displayed. If the title will not be activated.
1. Push the ENTER or BACK button and a list information is not provided then “Track” is
of tracks in the current folder is displayed. displayed. If a CD is ejected by pushing the button,
and it is not taken out from the loading slot
2. Push the BACK button. When the button is pushed repeatedly, within 8 seconds, the CD will automatically be
further information about the track can be reloaded to the slot to protect the CD.
3. Turn the MENU select knob for the preferred displayed along with the track title as follows:
folder.
4. Push ENTER to access the folder. Push

Model "AGC-3220YF: 2010/ 12/ 13

 Black plate (167,1)

are turned in. During the search, the notification 2. Push and hold a radio memory button *1 -
message AUTOSTORE appears in the display *6 until a beep sounds. (The radio mutes
and the sound is muted until the autostore when the memory button is pushed.)
operation is completed, upon which preset
3. The channel indicator will display and the
channel 1 is automatically tuned in.
radio mute disengages, indicating that the
TUNE/MENU knob: memory is stored properly.
N04AE190403
When adjusting the broadcasting station fre- 4. Perform steps 1 - 3 for all other memory
quency manually, turn the TUNE/MENU knob buttons.
until the preferred frequency is achieved. If the battery cable is disconnected, or if the
The frequency changes in steps of 100 kHz on audio fuse blows, the radio memory will be
the FM band and 9 kHz on the AM band. erased. In such a case, reset the desired
stations.
SAA3643 button: Radio data system (RDS)
N04AE190404 N04AE1905
FM-AM radio operation N04AE1904 When adjusting the broadcasting station fre- The RDS is a system through which encoded
The audio system operates when the ignition quency automatically, push the button. digital information is transmitted by FM radio
switch is in the “ACC” or “ON” position. When the system detects a broadcasting stations in addition to the normal FM radio
station, it will stop at the station. broadcasting. The RDS provides information
services such as station name, traffic informa-
FM-AM button:
N04AE190402 *1 *2 *3 *4 *5 *6 Radio memory tion, or news.
When the button is pushed while the audio buttons: NOTE:
system is off, the audio system will turn on and N04AE190405
In some countries or regions, some of
the radio will turn on. When the button is During radio reception, pushing the radio
memory button for less than 2 seconds will these services may not be available.
pushed while CD is already operating, it will
automatically turn off, and the radio will turn on. select the stored radio station.
Alternative Frequency (AF) mode:
N04AE190507
The audio system can store up to 18 FM station The AF mode operates in the FM (radio) mode.
To change the radio bands, push the button frequencies (six in each of FM 1, FM 2 and FM
until the desired band appears. T) and AM station frequencies. ● The AF mode operates both in the FM
(radio) and CD mode (if FM was previously
FM 1 ? FM 2 ? FM T ? AM ? FM 1 To store the station frequency manually: selected in the radio mode).
During FM reception, when the button is 1. Tune to the desired broadcasting station ● The AF function compares signal strengths
pushed for longer than 1.5 seconds, stations are frequency by using the button. and selects the station with the optimum
searched for and the 6 stations of the FM T band reception conditions for the currently tuned-

Model "AGC-3220YF: 2010/ 12/ 13

 Black plate (168,1)

in station.
RDS functions N04AE1909

Programme Service (PS) function (station

name display function):
N04AE190901
When an RDS station is tuned in with seek or
manual tuning, the RDS data is received and the
PS name is displayed.
TA Traffic announcement
N04AE1910
This function operates in both FM (radio) and
CD mode.
● Pushing the TA button selects the TA mode.
SAA2589 SAA3444
The TA indicator is displayed while TA mode
is on. FM-AM RADIO WITH COMPACT DISC USB MEMORY OPERATION (if
● When TA is pushed again. The mode will be CD PLAYER AND NAVIGATION (if equipped)
switched off and the TA indicator will equipped) N04AE48

disappear from the display. N04AE03 Connecting USB memory N04AE4801

For details, see the separately provided NISSAN Connect a USB memory stick as illustrated. A
Traffic announcement interrupt function: Connect Owner’s Manual. notification message will be displayed for a few
N04AE191001
When a traffic announcement is received, the seconds while the system reads the data.
announcement is tuned in and the TA indicator If the audio system has been turned off while the
starts to flash. USB memory was playing, pushing the POWER
Once the traffic announcement has finished, the ON/OFF button will start the USB memory
unit returns to the source that was active before operation.
the traffic announcement started. NOTE:
If TA is pushed during a traffic announcement, For models with Navigation system, see
the traffic announcement interrupt mode is the separately provided NISSAN Connect
cancelled. The TA mode returns to the standby Owner’s Manual.
mode and the audio unit returns to the previous
source.

Model "AGC-3220YF: 2010/ 12/ 13

 Black plate (169,1)

AUX button displayed along with the track title as follows:

N04AE4802
To operate the USB memory use one of the Track time ? Artist ? Album ? Folder name ?
following methods:
Track time
● Push the AUX button then turn the TUNE/
Track details:
MENU knob to the USB item. Once high-
lighted, push ENTER. Pushing and holding the button will turn the
display into a detailed overview and after a few
● Push AUX repeatedly until USB is high-
seconds it returns to the main display, or push
lighted, then push ENTER.
briefly.
Audio main operation
N04AE4803
The following operations are identical to the
audio main operation of the Compact Disc (CD)
operation. For details, see “n04ae1903CD player
SAA3445
operation” earlier in this section.
● List view iPod PLAYER OPERATION (if equipped)
N04AE49

● Quick search NOTE:

For models with Audio with Navigation
. , system, see the separately provided
NISSAN Connect Owner’s Manual.
● MIX (Random play)
Connecting iPod
● RPT (Repeat track) N04AE4901
Connect the iPod cable to the USB connector
● Folder browsing as illustrated. The battery of the iPod will be
charged during the connection to the vehicle. A
button N04AE4804 notification message will be displayed for a few
While a track with recorded music information seconds while the system is reading the data.
tags (ID3-tags) is being played, the title of the If the audio system has been turned off while the
played track is displayed. If the tags are not iPod was playing, pushing the POWER ON/
provided then a notification message is dis- OFF button will start the iPod operation. During
played. the connection, the iPod can only be operated
When the button is pushed repeatedly, with the audio controls.
further information about the track can be * iPod is a trademark of Apple Inc., registered in

Model "AGC-3220YF: 2010/ 12/ 13

 Black plate (170,1)

the U.S. and other countries. ● First generation iPhone (firmware version ● Artists
2.2.1)
Compatibility N04AE4902
● Albums
The following models are supported: ● Second generation iPhone 3G (firmware
version 3.1.3 (7E18)) ● Tracks
● Fourth generation iPod Classic (firmware ● Genres
version 3.1.1) ● iPhone 3GS (firmware version 3.1.2)
Operating tips For further information about each item, see the
● Fifth generation iPod video (firmware version N04AE4903 iPod owner’s manual.
1.3) ● iPod Shuffle and iPod mini are not sup-
ported. The following operations are identical to the
● Sixth generation iPod Classic 80 GB (firm- audio main operation of the Compact Disc (CD)
ware version 1.1.2PC) ● Some iPod operations may not be available operation. For details, see “n04ae1903CD player
with this system. operation” earlier in this section.
● Sixth generation iPod Classic 120 GB
(firmware version 1.1.2) AUX button ● List view
N04AE4904
● Sixth generation iPod Classic 160 GB To operate the iPod use one of the following ● Quick search
(2.0.4PC) methods:
● Push the AUX button then turn the TUNE/ . ,
● First generation iPod touch (firmware ver-
sion 2.2.1 (5H11)) MENU knob for the USB item. Once high- ● MIX (Random play)
lighted, push ENTER.
● Second generation iPod touch (firmware ● RPT (Repeat track)
version 3.1.2 (7D11)) ● Push AUX repeatedly until USB is high-
lighted then push ENTER. ● Folder browsing
● Third generation iPod touch (firmware ver-
sion 3.1.3 (7E18)) Audio main operation button
N04AE4905
N04AE4906
● First generation iPod nano (firmware version Interface: While a track with recorded music information
1.3.1) The interface for iPod operation shown on the tags (ID3-tags) is being played, the title of the
audio system display is similar to the iPod played track is displayed. If the tags are not
● Second generation iPod nano (firmware provided then a notification message is dis-
version 1.1.3) interface. Use the TUNE/MENU knob and the
ENTER button to play a track on the iPod. played.
● Third generation iPod nano (firmware ver- When the button is pushed repeatedly,
sion 1.1.3PC) The following items can be chosen from the
menu list screen. further information about the track can be
● Fifth generation iPod nano (firmware version displayed along with the track title as follows:
1.0.2PC) ● Playlists
Track time ? Artist ? Album ? Folder name ?

Model "AGC-3220YF: 2010/ 12/ 13

 Black plate (171,1)

Track time BLUETOOTH® AUDIO PLAYER settings

N04AE5003
Track details: To set up the Bluetooth® system with your
preferred device, push the SETUP button and
Pushing and holding the button will turn the select Bluetooth®, then push the ENTER button
display into a detailed overview and after a few or alternatively, push the PHONE button. The
seconds it returns to the main display or push following items are available:
briefly.
● Pair Device
BLUETOOTH® OPERATION (if Bluetooth® devices can be paired with the
equipped) system. A maximum of 5 devices can be
N04AE50
Regulatory information registered.
N04AE5001

Bluetooth® is a trademark owned

● Select Device
Pair Device:
Paired Bluetooth® devices are listed and can
by Bluetooth SIG, Inc. and li-
censed to Daewoo IS Corp. be selected for connection. 1. Push the SETUP button. Select the Blue-
tooth® key using the TUNE/MENU knob.
● Delete Device
CE statement Then push the ENTER button.
N04AE5002
Hereby DAEWOO IS Corp. declares that this A registered Bluetooth® device can be You can register up to 5 different Bluetooth®
system is in compliance with the essential deleted. mobile phones. However, you can only use
requirements and other relevant provisions of ● On/Off one device at a time. If you have 5 different
Directive 1999/5/EC. Bluetooth® registered devices, a new device
If this setting is turned off, the connection can only replace one of the 5 existing paired
between the Bluetooth® devices and the in- devices. Use Delete Device key to delete
vehicle Bluetooth® module will be cancelled. one of the existing paired devices.
NOTE: 2. Select the Pair Device key.
The audio system only supports Bluetooth®
devices with AVRCP (Audio Video Remote The pairing procedure depends on the
Control Profile) version 1.3, or 1.0 or ear- connected device:
lier. ● Mobile phone:
NOTE: The message Ready to Pair Pin:1234 will be
For models with Audio with Navigation displayed.
system, see the separately provided
NISSAN Connect Owner’s Manual.

Model "AGC-3220YF: 2010/ 12/ 13

 Black plate (172,1)

● Audio device without PIN code: display. During connection the following status Bluetooth® from the setup menu screen, or push
icons will be displayed (top left of the display): the Phone button. To switch the Bluetooth®
The Bluetooth® connection will be automa- Signal strength ( ), Battery status* signal on, push ENTER and a follow up screen
tically connected without any further input. will appear. Then select ®“On” and push ENTER
( ) and Bluetooth® “ON” ( ).
● Audio device with PIN code: to display the Bluetooth settings menu screen.
*: If the low battery message comes on, the
A new screen will appear. Assign the 4 digit Bluetooth® device must be recharged soon.
PIN code by turning the TUNE/MENU knob The pairing procedure and operation may vary
to each code and push the ENTER button to according to device type and compatibility. See
confirm. Then select “Validate” and push the Bluetooth® owner’s manual for further de-
ENTER. The Bluetooth® connection will be tails.
made.
Select Device:
The 4-digit PIN code is provided with the
audio device, see the owner’s manual of the The paired device list shows which Bluetooth®
audio device. audio or mobile phone devices have been paired
3. On Bluetooth® audio/mobile phone devices. or registered with the Bluetooth® audio system. Bluetooth® audio streaming main opera-
If the list contains devices then select the tion N04AE5004
1) Switch on the Bluetooth® connection, if not appropriate device to connect to the Bluetooth® Turn the ignition switch to the “ACC” or “ON”
already switched on. audio system. position. If the®audio system was turned off while
2) Switch on the search mode for Bluetooth® The following symbols indicate the capability of the Bluetooth audio was playing, pushing the
the registered device: POWER ON/OFF button will start the Blue-
devices. If the search mode finds a device it tooth® audio streaming.
will be shown on the device display.
. : Mobile phone integration AUX button
3) When a device is found use the TUNE/
MENU knob to scroll to, and push ENTER to . : Audio streaming (A2DP- Advanced
To operate the Bluetooth® audio streaming use
select My Car. Audio Distribution Profile)
one of the following methods:
4) Enter the number code shown on the Delete Device:
● Push the AUX button, then turn the TUNE/
relevant device with the device’s own key- A registered device can be removed from the MENU knob to highlight BT Audio, and push
pad, and push the confirmation key on the Bluetooth® audio system. Select a registered ENTER.
device itself. Refer to the relevant Bluetooth® device then push ENTER to confirm to deletion.
device owner’s manual for further details. ● Push AUX repeatedly until BT Audio is
On/Off: highlighted, then push ENTER.
When successfully paired a notification mes-
sage will be displayed, then the audio system If Bluetooth® has been switched off a notification The type of display, *A or *B , shown on the
display will return to the current audio source message On/Off appears when you select audio system can vary depending on the Blue-

Model "AGC-3220YF: 2010/ 12/ 13

 Black plate (173,1)

tooth® version of the device. memory modes will be skipped.

VOLUME control switch
buttons: N04AE1003
N04AE500401 Push up or down the VOLUME control switch to
Fast Forward, Fast Reverse: increase or decrease the volume.
When the or button is pushed
continuously, the track will be played at high Tuning switch N04AE1007
speed. When the button is released, the track
will be played at normal playing speed. Memory change (radio):
N04AE100701
Push the tuning switch for less than 1.5 seconds
Track up/down: to change the next or previous radio preset.
Pushing the or button once, the track SEEK tuning (radio):
will be skipped forward to the next track or N04AE100702
backward to the beginning of the current played SAA3641
Push the tuning switch for more than 1.5
track. Push the or button more than seconds to seek the next or previous radio
once to skip through the tracks. 1. SOURCE select switch station.
2. Tuning switch
PAUSE 3. VOLUME control switch
APS (Automatic Program Search) FF, APS
REW (CD):
Push the MUTE button to pause. To resume, STEERING WHEEL SWITCH FOR N04AE100703

push MUTE again. AUDIO CONTROL (if equipped) Push the tuning switch for less than 1.5 seconds
N04AE10 to return to the beginning of the present
DISP button (Type B display screen only): The audio system can be operated using the program or skip to the next program. Push
N04AE500402 controls on the steering wheel. several times to skip back or skip through
If the song contains music information tags (ID3- programs.
tags), the title of the played song will be SOURCE select switch
N04AE1004
displayed. If tags are not provided then the With the ignition switch placed in the “ACC” or This system searches for the blank intervals
display will not show any messages. “ON” position, push the SOURCE select switch between selections. If there is a blank interval
to turn the audio system on. within one program or there is no interval
When the DISP button is pushed repeatedly between programs, the system may not stop in
further information about the song can be Push the SOURCE select switch to change the the desired or expected location.
displayed along with the song title. mode.
A long push on the DISP button will turn the AM, FM, CD, AUX, iPod and USB memory
display into a detailed overview which after a few
seconds returns to the main display; or push the If no CD is loaded or AUX/iPod/USB memory is
DISP button briefly. not connected, the CD and AUX/iPod/USB

Model "AGC-3220YF: 2010/ 12/ 13

 Black plate (174,1)

BLUETOOTH® MOBILE PHONE

CAR PHONE OR CB RADIO FEATURE (if equipped for models
without navigation system)
N04AK N04BJ
When installing a CB, ham radio or a car phone WARNING: automatically activated on the registered mobile
in your vehicle, be sure to observe the following phone (via Bluetooth®) when it comes into
cautions, otherwise the new equipment may Whilst driving, using the mobile phone is
range.
adversely affect the Engine Control System and extremely dangerous because it signifi-
other electronic parts. cantly impairs your concentration and A notification message appears on the audio
diminishes your reaction capabilities to display when the phone is connected, when an
CAUTION: incoming call is being received, as well as when
sudden changes on the road, and it may
● Keep the antenna as far away as lead to a fatal accident. This applies to all a call is initiated.
possible from the Electronic Control phone call situations such as when receiv- When a call is active, the audio system,
Module. ing an incoming call, during a phone microphone (located in the ceiling in front of
conversation, when calling through the the rear view mirror), and steering wheel
● Keep the antenna wire at least 20 cm (8
phone book search, etc. switches enable hands-free communication.
in) away from the Engine Control
harnesses. Do not route the antenna If the audio system is in use at the time, the
CAUTION: radio, CD or AUX source mode will be muted
wire next to any harnesses.
Certain country jurisdictions prohibit the and will stay muted until the active call has
● Adjust the antenna standing wave ratio use of the mobile phone in the car without ended.
as recommended by the manufacturer. hands-free support. The Bluetooth® system may be not be able to
● Connect the ground wire from the radio This chapter provides information about the connect with your mobile phone for the following
chassis to the body. NISSAN ®hands-free phone system using a reasons:
● For details, consult a NISSAN dealer. Bluetooth connection. ● The mobile phone is too far away from the
Bluetooth® is a wireless radio communication vehicle.
NOTE: standard. This system offers a hands-free facility
For further information, visit the NISSAN ● The Bluetooth® mode on your mobile phone
for your mobile telephone to enhance driving has not been activated.
web site: www.nissan-europe.com. Select comfort.
your country from the list and go to the ● Your mobile phone has not been paired with
“SERVICES” menu. If not available on the NOTE: the Bluetooth® system of the audio unit.
web site, contact a NISSAN dealer. For models with Navigation system, see
the separately provided NISSAN Connect ● The mobile phone does not support Blue-
Owner’s Manual. tooth® technology (BT Core v1.2, Hands
Free Profile v1.0 and Object Push Profile
In order to use your mobile phone with the v1.0).
Bluetooth® of the audio system, the mobile
phone must first be setup. For details, see.
Once it has been setup, the hands-free mode is

Model "AGC-3220YF: 2010/ 12/ 13

 Black plate (175,1)

NOTE: ● Select Device

For details, see your mobile phone’s own-
er’s manual. Paired Bluetooth® mobile phone are listed
on the display and can be selected for
connection.
● Delete Device
A registered Bluetooth® mobile phone can
be deleted.
● On/Off
If this setting is turned off, the connection
between the Bluetooth® devices and the in-
vehicle Bluetooth® module will be cancelled.
SAA3478
When successfully paired, a notification mes-
1. Phone button sage will be displayed. During the connection
2. Phone book quick search button the following status icons will be displayed (top
left of display): Signal strength ( ), Battery
3. (Back) button
status ( ) and Bluetooth® ( ).
BLUETOOTH® SETTINGS N04BJ01 *: If the low battery message comes on, the
To setup the Bluetooth® system to pair (connect Bluetooth® device must be recharged soon.
or register) your preferred mobile phone, push
the SETUP button, select the Bluetooth® key, HANDS-FREE TELEPHONE CONTROL
and then push the ENTER button. It is also N04BJ02

possible to enter the setup menu directly via the The hands-free mode can be operated using the
Phone button. For details, see “n04ae50BLUE- Phone button on the audio system, or on the
TOOTH® OPERATION” earlier in this section. steering wheel.

● Pair Device Initiating a call

N04BJ0201
A call can be initiated using one of the following
Bluetooth® mobile phones can be paired
methods:
with the system. A maximum of 5 mobile
phones can be registered. — Redial
— Phone book

Model "AGC-3220YF: 2010/ 12/ 13

 Black plate (176,1)

— Manual dialling To dial a contact from the phone book proceed

as follows:
— Missed calls
1. Push the Phone button.
— Dialled calls
2. Turn the TUNE/MENU knob and scroll down
— Received calls to Phone Book then push ENTER.
Redial: 3. Scroll down through the list, select the
N04BJ020101
To redial or call the last number dialled, push the appropriate contact name (highlighted),
Phone button for more than 2 seconds. and push ENTER.
4. A following screen will show the number to
be dialled. If correct, push ENTER again to
dial the number.
Manually dialling a phone number:
If the contact has more numbers assigned N04BJ020103

for (home), (mobile) or (office), WARNING:

scroll, and select the appropriate number to Park the vehicle in a safe location, and
dial. apply the parking brake before making a
Alternatively, the quick search mode can be call.
used as follows: To dial a phone number manually use the audio
1. Push A-Z. system display (virtual keyboard pad) as follows:

2. Turn the TUNE/MENU knob for the first 1. Push the Phone button, and turn the TUNE/
alphabetic or numerical letter of the contact MENU knob to highlight Call Number.
Making a call from the phone book:
N04BJ020102 name. Once highlighted, push ENTER to 2. Push ENTER to select Call Number.
Once the Bluetooth® connection has been select the letter.
made, between the registered mobile phone 3. Turn the TUNE/MENU knob to scroll along,
and the audio system, phone book data will be 3. The display will show the corresponding and select each number of the phone
transferred automatically to the audio system. contact name(s). Where necessary, use the number. Once highlighted, push ENTER
The transfer may take a while before completion. TUNE/MENU knob again to scroll further for after each number selection.
the appropriate contact name to call.
The phone book data is available only when the To delete the last number entered scroll to
phone is connected to the system. The system 4. A following screen will show the number to the / (Backspace) symbol, and once high-
downloads the latest phone book data each time be dialled. If correct, push ENTER again to lighted push ENTER. The last number will be
the phone is connected. dial the number. deleted. Pushing ENTER repeatedly will

Model "AGC-3220YF: 2010/ 12/ 13

 Black plate (177,1)

delete each subsequent number. During a call:

N04BJ020201
4. After entering the last number, scroll to the During a call, by scrolling and pushing ENTER,
symbol, and push ENTER, or push the you can select the following options:
Phone button to dial the number.
● “ ” — Use this item to enter numbers
Call Lists: during a call. For example, if directed by an
N04BJ020104
A number from the dialled, received, or missed automated phone system to dial an exten-
call lists can also be used to make a call. sion number the system will send the tone
associated with the selected number.
● Dialled call
● “ ” — Use this item (the transfer handset
Use the dialled call mode to make a call command) to transfer the call from the audio
which is based on the list of outgoing system to your mobile phone.
(dialled) calls.
● Received call
Receiving a call N04BJ0202
To transfer the call back to hands-free via
the audio system select “ ”.
When receiving an incoming call, the display will
Use the received call mode to make a call show the caller’s phone number (or a notification
which is based on the list of received calls. message that the caller’s phone number cannot
be shown):
● Missed call
● Answer the call by pushing the Phone
Use the missed call mode to make a call button briefly, or push ENTER.
which is based on the list of missed calls.
● End the call, after the conversation, by:
1. Push the Phone button, and select Call
Lists. — Pushing the Phone button briefly again.
2. Turn the TUNE/MENU knob to scroll to an — Pushing ENTER when the symbol is
item, and push ENTER to select it. highlighted.
3. Scroll to the preferred phone number then If is not highlighted, turn the TUNE/
push ENTER, or push the Phone button to MENU knob to , and push ENTER.
dial the number.
● Reject the call by selecting symbol on
the screen using TUNE/MENU knob and
pushing ENTER to select it.

Model "AGC-3220YF: 2010/ 12/ 13

 Black plate (178,1)

● redial the last outgoing call by pushing and

holding the button for a short period
of time.

SAA2362

Steering wheel switch for Bluetooth®

N04BJ0203
The hands-free mode can be operated using the
controls on the steering wheel.
Volume control switch:
N04BJ020301
The volume control switch allows you to adjust
the volume of the speakers by pushing the + or
− buttons *1 .
Telephone button:
N04BJ020302

The and buttons *2 allow you to:

● accept an incoming call by pushing the
button.
● reject an incoming call by pushing the
button during the incoming call.

● end an active call by pushing the

button once.

Model "AGC-3220YF: 2010/ 12/ 13

 Black plate (180,1)

FCC Information to User

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
‐Consult the dealer or an experienced radio/TV technician for help.

Caution
Modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC Compliance Information :

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation

Model "AGC-3220YF: 2010/ 12/ 13

 Black plate (180,1)

MEMO

Model "AGC-3220YF: 2010/ 12/ 13