COMPRESSOR SIZING USING DWSIM 31 December 2022

By Viraj Desai, Process Engineer

COMPRESSOR SIZING USING DWSIM:

A FREE AND OPEN-SOURCE CHEMICAL PROCESS SIMULATOR

BY
VIRAJ DESAI, PROCESS ENGINEER
EMAIL: VIRAJ DESAI

LEVEL: INTERMEDIATE
VERSION: 0.00
DECEMBER 2022

1
 COMPRESSOR SIZING USING DWSIM 31 December 2022
By Viraj Desai, Process Engineer

PREFACE

The manual “Compressor Sizing Using DWSIM” presents a set of Compressor Sizing exercise using a
free and open-source chemical process simulator “DWSIM” and can be utilized to establish process
simulation laboratory as part of undergraduate chemical engineering degree or in allied degree
curriculum. The problem statements are of intermediate level.

Prerequisite

• Must know about DWSIM UI/UX.

• Flow sheeting in DWSIM
• Selection of Thermodynamic Packages.
• Manipulating variables
• Line Hydraulics
• Basic Modules

Thanks

Viraj Desai

P.E. O&G

Disclaimer

All the exercises are strictly restricted to learning only and not meant to be used in real world
application.

2
 COMPRESSOR SIZING USING DWSIM 31 December 2022
By Viraj Desai, Process Engineer

PROCESS SIMULATION USING DWSIM: A FREE AND OPEN-SOURCE CHEMICAL

PROCESS SIMULATOR

PREAMBLE

DWSIM is an open-source CAPE-OPEN compliant chemical process simulator. It features a Graphical

User Interface (GUI), advanced thermodynamics calculations, reactions support and petroleum
characterization / hypothetical component generation tools. DWSIM can simulate steady-state,
vapor–liquid, vapor–liquid-liquid, solid–liquid and aqueous electrolyte equilibrium processes and has
built-in thermodynamic models and unit operations (https://en.wikipedia.org/wiki/DWSIM ). It is
available for Windows, Linux and Mac OS.

The objective of the course is to create awareness of the open-source process simulator “DWSIM”
among prospective graduates and practicing process engineers. The course will cover Intermediate
aspects of create flow sheet in DWSIM and simulation of simple Pressure changing module like pipe
segment, Compressor, etc.

Target Audience

• Junior Interns in Process Firms

• III / Final year B. Tech. Chemical Engineering students
• M. Tech. Chemical Engineering students
• Practicing Process Engineers

3
 COMPRESSOR SIZING USING DWSIM 31 December 2022
By Viraj Desai, Process Engineer

Table of Contents

1 Background ..................................................................................................................................... 6
1.1 Power Required In Fan, Blower And In Adiabatic Compressor............................................... 6
2 Compressor Sizing ........................................................................................................................... 7
3 Cross-Checking in KORF hydraulics ............................................................................................... 18
4 Manual calculation in SMath Studio ............................................................................................. 20
5 References .................................................................................................................................... 21

4
 COMPRESSOR SIZING USING DWSIM 31 December 2022
By Viraj Desai, Process Engineer

List of Figures

Figure 1 Problem Statement ................................................................................................................... 7

Figure 2 Suction header stream specs .................................................................................................... 8
Figure 3 Pipe segment............................................................................................................................. 8
Figure 4 Compressor Inlet Specs ............................................................................................................. 9
Figure 5 Adding specs for hydraulic profile |Compressor Inlet Pipe | ................................................. 10
Figure 6 Elevation vs horizontal distance profile for Compressor inlet pipe ........................................ 11
Figure 7 Pipe segment of Compressor Outlet Specs ............................................................................. 12
Figure 8 Adding specs for hydraulic profile |Compressor Outlet Pipe | .............................................. 13
Figure 9 Elevation vs horizontal distance profile for Compressor outlet pipe ..................................... 14
Figure 10 Compressor Specs ................................................................................................................. 15
Figure 11 Flow Sheet ............................................................................................................................. 16
Figure 12 Power requirement ............................................................................................................... 16
Figure 13 Compressor power calculation in KORF ................................................................................ 18

5
 Background 31 December 2022
By Viraj Desai, Process Engineer

1 BACKGROUND

1.1 POWER REQUIRED IN FAN, BLOWER AND IN ADIABATIC COMPRESSOR

Fans, blowers, and compressors are used to increase the mechanical energy of gases. Discharge
pressure of a fan is less than 3.45 kPa g (350 mm WC). If discharge pressure required is higher than
3.45 kPa g then a blower is used. Maximum discharge pressure of blower is 1 atm g. If the discharge
pressure required is more than 2 atm a then a compressor is used. Discharge pressure of compressor
ranges from 2 atm a to thousands of atmospheres.

Blowers are always operated in an adiabatic manner. Many compressors are also operated in
adiabatic manner (Example: air compressors up to 10 bar g). In adiabatic compressor, jacketed
cooling is not provided. While in other types; polytropic and isothermal compressors, jacketed
cooling is provided around the compressor section. In isothermal compressor, inlet temperature of
gas is equal to outlet temperature of gas. If both temperatures are not same even after providing
the jacket cooling, it is called polytropic compressor. For adiabatic compression
k
k (k-1) (k-1 )
P2 V1 T1 V1 P2 T2
P1
=( ) ,
V2 T2
=( )
V2
, P1
=( )
T1

Where,
C
k = Cpv = ratio of specific heat at constant pressure to specific heat at constant volume

P2, P1 = outlet/inlet pressure of gas, kPa

V2, V1 = outlet/inlet volume of gas, m3/kmol
T2, T1 = outlet/inlet temperatures of gas, K
Power required in single stage blowers or in single stage adiabatic compressor,
k-1
2.78 * 10-4 k P k
P0 = 𝜂
(k-1) qv1 P1 [(P2 ) - 1]
1

P0 = Power required, kW
P1, P2 = Absolute inlet pressure & Outlet pressure, kPa
qv1 = Volumetric fl ow rate of gas based on inlet condition, m3/h
η = Efficiency of compressor
Discharge temperature of gas from the blower or single stage adiabatic compressor,
k-1
P k
T2 = T1 (P2 )
1

6
 Compressor Sizing 31 December 2022
By Viraj Desai, Process Engineer

2 COMPRESSOR SIZING
Objective

Find the Power Requirements, outlet temperature for the given problem statement.

Data

Figure 1 Problem Statement

DWSIM Blocks Used

• Pipe segment
• Material Stream
• Compressor
• Indicators (Digital or Analog)

Procedure

1. Start a new DWSIM Simulation (DWSIM VER 8.2 - CLASSIC UI). Click on “New steady state
Simulation” as a template for new simulation
2. The simulation configuration window will be opened. It shows a specification page. Add
components required to solve the problem statement. In the present case, add methane and
ethane. Ensure all components are added from the same property database. For instance, in
this case, both components are added from “ChemSep” database.
3. Specify the thermodynamic package as Peng-Robinson (PR) (1).
4. Customize the system of units for the simulation and click “Next”.
5. The flow sheeting section of simulation window will be opened. First, let provide suction
header, compressor inlet, compressor outlet and discharge header streams for the unit
operation to be performed.

7
 Compressor Sizing 31 December 2022
By Viraj Desai, Process Engineer

6. On clicking the “Suction header” stream, general information about the stream will be
displayed on the left side of screen. Specify the feed compositions, temperature, and
pressure for the inlet streams. Once credentials are specified for the Suction header
streams, the color of stream turns blue.

Figure 2 Suction header stream specs

7. Below the Unit Operation tab on left, locate the pipe segment block. Drag and drop into the
flow sheet. Rename it as “Compressor inlet”.

Figure 3 Pipe segment

8
 Compressor Sizing 31 December 2022
By Viraj Desai, Process Engineer

8. Under specification for pipe segment add the data as follows.

Figure 4 Compressor Inlet Specs

9
 Compressor Sizing 31 December 2022
By Viraj Desai, Process Engineer

9. Click on the hydraulic profile as shown in the image

Figure 5 Adding specs for hydraulic profile |Compressor Inlet Pipe |

Segment 1

Type Straight Tube

Quantity 1

Increments 5

Material Stainless Steel

Rugosity (m) 4,5E-05

Therm. Conduct. (W/[m.K]) T-Dep

Length (m) 5

10
 Compressor Sizing 31 December 2022
By Viraj Desai, Process Engineer

Elevation (m) 0

Ext. diameter (mm) 273.05

Int. diameter (mm) 254.508

10. Click on “View” in hydraulic profile tab to see layout of pipe network

Figure 6 Elevation vs horizontal distance profile for Compressor inlet pipe

11. Once all segments are added with the data provided as reference in the table above click on

green tick mark to apply changes

11
 Compressor Sizing 31 December 2022
By Viraj Desai, Process Engineer

12. Similarly add a pipe segment name it as “Compressor outlet line” And add the following
specs.

Figure 7 Pipe segment of Compressor Outlet Specs

12
 Compressor Sizing 31 December 2022
By Viraj Desai, Process Engineer

Figure 8 Adding specs for hydraulic profile |Compressor Outlet Pipe |

Segment 1

Type Straight Tube

Quantity 1

Increments 5

Material Stainless Steel

Rugosity (m) 4,5E-05

Therm. Conduct. (W/[m.K]) T-Dep

Length (m) 10

Elevation (m) 0

13
 Compressor Sizing 31 December 2022
By Viraj Desai, Process Engineer

Ext. diameter (mm) 168.275

Int. diameter (mm) 154.051

Figure 9 Elevation vs horizontal distance profile for Compressor outlet pipe

13. Once all segments are added with the data provided as reference in the table above click on

green tick mark to apply changes

14
 Compressor Sizing 31 December 2022
By Viraj Desai, Process Engineer

14. Add a Compressor from the pressure changes ribbon and connect the “Compressor inlet
line” and “Compressor outlet line”. And add the following specs

Figure 10 Compressor Specs

15
 Compressor Sizing 31 December 2022
By Viraj Desai, Process Engineer

15. Run the simulation by pressing “Solve flow sheet” button on the top corner of the screen.

Figure 11 Flow Sheet

16. Click on result tab and generate report for Compressor.

Figure 12 Power requirement

16
Compressor Sizing 31 December 2022
By Viraj Desai, Process Engineer

Compressor Compressor Suction Discharge

Outlet Inlet Header Header

Temperature (C) 199.93 24.9995 25 199.929

Pressure (barg) 5 -0.000855553 0 4.99407

Mass Flow (kg/h) 3600 3600 3600 3600

Molar Flow (kmol/h) 215.005 215.005 215.005 215.005

Volumetric Flow (m3/h) 1404.43 5252.25 5247.81 1405.81

Density (Mixture) (kg/m3) 2.56332 0.685421 0.686 2.5608

Molecular Weight (Mixture) 16.7438 16.7438 16.7438 16.7438

(kg/kmol)

Specific Enthalpy (Mixture) 426.366 -1.18823 -1.18823 426.366

(kJ/kg)

Specific Entropy (Mixture) 0.300193 0.0643308 0.0639124 0.300681

(kJ/[kg.K])

Molar Enthalpy (Mixture) 7138.97 -19.8955 -19.8956 7138.98

(kJ/kmol)

Molar Entropy (Mixture) 5.02636 1.07714 1.07014 5.03454

(kJ/[kmol.K])

Thermal Conductivity 0.060826 0.0335707 0.0335708 0.0608258

(Mixture) (W/[m.K])

Density (Vapor) (kg/m3) 2.56332 0.685421 0.686 2.5608

17
 Cross-Checking in KORF hydraulics 31 December 2022
By Viraj Desai, Process Engineer

3 CROSS-CHECKING IN KORF HYDRAULICS

Figure 13 Compressor power calculation in KORF

28 Compressor
Sizing Korf Results.pdf

Compressor Sizing Using Korf Hydraulics

18
Cross-Checking in KORF hydraulics 31 December 2022
By Viraj Desai, Process Engineer

COMPRESSOR INLET LINE PROFILE DATA

Length Inclination Pressure Temperature Liquid Vapor Heat Liquid Flow Overall HTC h (Internal) k/L (Wall) k/L (Insulation) h (External) External
(m) (degrees) (barg) (C) Velocity Velocity (kW) Holdup Regime (W/[m2.K]) (W/[m2.K]) (W/[m2.K]) (W/[m2.K]) (W/[m2.K]) Temperature (C)
(m/s) (m/s)

0 0 0 25 0 28.6538 0 0 Vapor 0 0 0 0 0 25
Only

1 0 -0.000171053 24.9999 0 28.6587 0 0 Vapor 0 0 0 0 0 25

Only

2 0 -0.000342135 24.9998 0 28.6635 0 0 Vapor 0 0 0 0 0 25

Only

3 0 -0.000513245 24.9997 0 28.6683 0 0 Vapor 0 0 0 0 0 25

Only

4 0 -0.000684385 24.9996 0 28.6732 0 0 Vapor 0 0 0 0 0 25

Only

5 0 -0.000855553 24.9995 0 28.678 0 0 - 0 0 0 0 0 25

COMPRESSOR OUTLET LINE PROFILE DATA

Length Inclination Pressure Temperature Liquid Vapor Heat Liquid Flow Overall HTC h (Internal) k/L (Wall) k/L (Insulation) h (External) External
(m) (degrees) (barg) (C) Velocity Velocity (kW) Holdup Regime (W/[m2.K]) (W/[m2.K]) (W/[m2.K]) (W/[m2.K]) (W/[m2.K]) Temperature (C)
(m/s) (m/s)

0 0 5 199.93 0 20.9304 0 0 Vapor 0 0 0 0 0 25

Only

2 0 4.99882 199.93 0 20.9345 0 0 Vapor 0 0 0 0 0 25

Only

4 0 4.99763 199.93 0 20.9387 0 0 Vapor 0 0 0 0 0 25

Only

6 0 4.99645 199.929 0 20.9428 0 0 Vapor 0 0 0 0 0 25

Only

8 0 4.99526 199.929 0 20.9469 0 0 Vapor 0 0 0 0 0 25

Only

10 0 4.99407 199.929 0 20.951 0 0 - 0 0 0 0 0 25

19
Manual calculation in SMath Studio 31 December 2022
By Viraj Desai, Process Engineer

4 MANUAL CALCULATION IN SMATH STUDIO

20
References 31 December 2022
By Viraj Desai, Process Engineer

5 REFERENCES

1. Thakore - Introduction To Process Engineering And Design-MC GRAW HILL INDIA (2015) Pg
116-117

21