raspberrytips.

com /tar-linux-command/

How To Use the Tar Command on Linux: A

Complete Guide
Patrick Fromaget ⋮ ⋮ 13/03/2024

Tar is an essential command on Linux. As a sysadmin, I use it almost every day for backups,
software installations or file transfers. But even so, remembering the right syntax and options
is not straightforward. This is why I’m sharing this short guide on how to use it, with
everything you need to know.

On Linux, the “tar” command allows users to manage archive files (create,
extract, compress). Archive files are generally compressed and bundle many
files together (typically for backup or software distribution purposes).

In this article, I’ll start with the basic syntax and options you can use with this command,
then add some useful examples you’ll typically use on Linux, and end with some ninja tips for
more advanced users.

1/10
Linux doesn’t have to be intimidating. With my e-book, Master Linux Commands, you’ll
uncover the secrets of the terminal in a fun, step-by-step journey. From basics to scripts, get
ready to level up your Linux skills. Oh, and did I mention the handy cheat sheet you get as a
bonus?

Command syntax
The main syntax for the “tar” commands looks like this:
tar <options> <archive-file> <files-or-directory>

We’ll see different examples in the following article that will make everything more clear, but
in short:

Options are used to tell tar exactly what to do with the archive. There are many
features, and so many options available (creating an archive, extracting files,
compressing them, etc.).
The archive file is simply the name of the file we want to create or extract files from
(e.g. archive.tar).
The files or directories are either the files we want to add to the archive or where we
want to extract the contents of the archive.

Warning: If you try this command for the first time, be sure to practice in a safe
environment, ideally without administrative privileges. If you’re not careful and mix up the
command arguments, you can quickly start renaming files you shouldn’t (like system files).

Usage examples
The tar command is typically used to create archives or to extract files from them. That’s the
most important case you should try, and if possible, remember. So let’s start with these basic
examples.

Creating an uncompressed archive

Creating an archive means grouping several files (or the contents of a folder)
into a single file: the archive. This can be used for backup purposes, or to share
many files at once (upload online, on a network share, etc.).

If you’re a Windows guy, that’s typically what you do when you select “Compress to ZIP file”,
but in this case, there is no compression (we’ll get to it soon).

The main syntax to create an archive with tar looks like this:
tar -cf <archive> <files>

2/10
So for example:
tar -cf archive.tar ubuntu-release-metrics/
Uncompressed archives are generally named with the “.tar” extension.

“ubuntu-release-metrics” is a test folder, with the source code of a project I downloaded from
GitHub. With this command, all the project files are grouped in the archive.tar file.

The “-c” option is for “create”, and “-f” for file (we specify the destination file). Quite logical
for now.

Your Go-To Linux Command Reference!

Download your exclusive free PDF containing the most useful Linux commands to elevate
your skills!
Download now

Note: you can find all the main options near the end of this page.

Extracting files from an archive

Now, if you already have the “.tar” archive and want to extract the files from it,
it’s almost the same syntax:
tar -xf <archive>
By default, files are extracted in the current folder, so there is no need to specify the second
argument.

You already know the “-f” option, and “-x” is for “eXtract” (less logical, but ok).

If you want to specify a destination directory for the files, you need to add the “-C” option,
like this:
tar -xf archive.tar -C tmp/

3/10
This way all files are extracted to “tmp/”, and it avoids creating a mess in the current
directory if the archive is just a bunch of single files grouped without a proper structure.

Listing content from an archive

By understanding how to create archives, and extract files from them, you’re pretty much set.
But another interesting option is to list the files from the archives, without extracting them.

With the Tar command, the “-t” option can be used to list all files from an
archive, like this:
tar -tf archive.tar

By the way, once you know all the files present in the archive, you can add a parameter to
the previous command, to extract only one specific file.
For example:
tar -xf archive.tar ubuntu-release-
metrics/metrics/lib/ubunturelease.py

Creating compressed archives

I’ve covered the basic uses of the Tar command in the previous section (compress, extract,
etc.). But to be honest, we rarely use these commands without compression.

I mentioned that on Windows you generally use “Compress to ZIP file”, it’s similar on Linux.
We usually create a compressed archive using different compression formats (gzip, bzip2 or
xz for example) and not just the tar extension.

Creating a compressed archive instead of a simple archive uses a similar

command syntax, takes about the same amount of time but saves disk space
usage and speeds up file transfers.

I’ll show you the 3 main compression formats used on Linux, but you’ll quickly see that there
are no significant differences in the command lines you use, and they are all based on the
previous ones we saw.

4/10
Using Gzip archives

The most common archive compression format you’ll find when downloading things online is
probably still Gzip. It’s a good compromise between speed and compression, so it’s often the
default.

To create a compressed archive with Gzip, the syntax is:

tar -czf <archive> <files>

Yes, it’s almost the same as seen previously, we are just adding the “-z” option to specify we
want compression with Gzip. So, for example:
tar -czf archive.tar.gz ubuntu-release-metrics/

I forgot the extension in my screenshot, but Gzip archives are generally named with the
“.tar.gz” extension.

Your Go-To Linux Command Reference!

Download your exclusive free PDF containing the most useful Linux commands to elevate
your skills!
Download now

Then, it’s the same idea to extract files from a Gzip archive. We use the same “-
xf” parameters, but add the “-z” option:
tar -xzf <archive> -C <destination>

Using Bzip2 archives

Bzip2 is another compression format that is often used on Linux systems. It’s
known for better compression than Gzip, but it’s a bit slower. So, it’s a good option
to get smaller archive files and don’t mind waiting a bit during compression or extraction.

Note: You may need to install it on your system before you can use this method. For
example, on Debian or Ubuntu servers:

5/10
sudo apt install bzip2

The commands are nearly the same when dealing with Bzip2 archive or Gzip archives. The
only change is that Bzip2 uses the “-j” option instead of “-z”.

Creating a Bzip2 archive:

tar -cjf archive.tar.bz2 ubuntu-release-metrics/
Extracting files from a Bzip2 archive:
tar -xjf archive.tar.bz2 -C tmp/

See? The only thing to remember is the second parameter, to use the proper compression
format.

Using Xz archives

Finally, “xz” is another format you may come across from time to time. It offers the
best compression, so it’s often used for large projects (like distribution images), but it’s more
demanding on CPU resources and takes more time to create or decompress.

The additional option for the “xz” format is “-J”, so taking the same examples:

Creating an Xz archive:
tar -cJf archive.tar.xz ubuntu-release-metrics/
Extracting files from an Xz archive:
tar -xJf archive.tar.xz -C tmp/

Make sure to add the “.tar.xz” extension to your file names to remember which compression
format was used.

Advanced tips
Now that we’ve covered the basics of creating, extracting, and compressing archives, let’s
look at some ninja tips that can be useful in more advanced cases.

Adding files to an existing archive

In some cases, you might be interested in adding files to an existing archive,

without recreating it from scratch.

There are two options to update an existing archive:

-r : (Append) Will add the specified file at the end of the archive files, without checking
for duplicates. It can’t replace or modify files that are already in the archive (even if it’s

6/10
 the same name).
-u : (Update) Will update the archive, including newer versions of files already in it.

It’s generally safer and faster to use the first option unless you have a specific reason (like
keeping a mirror of the live folder on your system).

Once your choice is made, the command syntax is the same anyway, for example:
tar -rf archive.tar new_file.txt
tar -uf archive.tar new_file.txt

In this example, file4.txt is added to my archive file, whatever option I use.

Excluding files

Another interesting option to have in mind when dealing with tar archives is the “–exclude”
parameter. As the name suggests, it allows you to skip files when creating or extracting them.

A typical syntax looks like this:

tar -cf archive.tar --exclude=<pattern> <files>
Where the pattern defines which files to skip (You can use a wildcard character like * to skip
extensions).

So, for example:

tar -cf files.tar --exclude="file4.txt" *.txt
Will add all TXT files in files.tar, except file4.txt

7/10
Note: The position of the –exclude parameter in this command is critical. It must be
between the archive name and the input files. It won’t work if you try to use it at the
beginning or the end.

Options summary
As promised, here is a summary of all the main options you can use with the Tar command
on Linux:

-c: Create a new archive.

-x: Extract files from an archive.
-C: Specify where to extract the files.
-v: Verbosely list files processed.
-f: Specify the filename of the archive.
-z: Filter the archive through gzip (use for .gz or .tgz files).
-j: Filter the archive through bzip2 (use for .bz2 files).
-J: Filter the archive through xz (use for .xz files).
-t: List the contents of an archive.
-u: Update an existing archive (only append files newer than the ones in the archive).
–exclude: Exclude files or directories.
-r: Append files to the end of an archive.
-p: Preserve permissions.

We’ve seen most of them in examples, and the other ones are self-explicit. But you can always
check the documentation for more advanced things and details on specific options:
man tar.

Your Go-To Linux Command Reference!

Download your exclusive free PDF containing the most useful Linux commands to elevate
your skills!
Download now

Alternatives
Tar is pre-installed on most Linux distributions and works pretty well, so there
is really no need for an alternative. But you might come across other Linux
commands that are closely related, and can sometimes be used for similar
purposes.

For example, when dealing with backups, “rsync” is often preferred to “tar”, especially when
mirroring files and sending them to a remote location. Rsync can quickly compare a source

8/10
and destination folder, copy only the updated files and compress them during the transfer.
You can read my guide about the “rsync” command here for more details.

Sometimes, we may also use other commands to compress (or extract) files on Linux. For
example, tools like Zip, 7zip or rar are sometimes used instead of tar. You also have
commands like “gzip” or “gunzip” that can deal with compression directly, without using tar
in the first place.

If you want to learn more Linux commands, you can check this article with the top 50 Linux
commands everyone must know when working on Linux systems.

Your Go-To Linux Command Reference!

Download your exclusive free PDF containing the most useful Linux commands to elevate
your skills!
Download now

🛠 This tutorial doesn't work anymore? Report the issue here, so that I can update it!
Reminder: Remember that all the members of my community get access to this website
without ads, exclusive courses and much more. You can become part of this community for
as little as $5 per month & get all the benefits immediately.

Additional Resources
Overwhelmed with Linux commands?
My e-book, “Master Linux Commands”, is your essential guide to mastering the terminal. Get
practical tips, real-world examples, and a bonus cheat sheet to keep by your side.
Grab your copy now.

VIP Community
If you just want to hang out with me and other Linux fans, you can also join the community. I
share exclusive tutorials and behind-the-scenes content there. Premium members can also
visit the website without ads.
More details here.

Need help building something with Python?

Python is a great language to get started with programming on any Linux computer.
Learn the essentials, step-by-step, without losing time understanding useless concepts.
Get the e-book now.

9/10
Sharing is caring!

10/10