Scribd
Upload
15 views

Assignment 2a

The document contains 8 problems related to calculating electrical quantities like currents, voltages, power for various 3-phase circuits and loads. The problems involve Δ and Y connected loads, unbalanced loads, loads with different impedances connected in parallel, and using the two-wattmeter method to measure power. Calculations include line and phase currents, source voltages, complex power, real power loss and more.

Uploaded by

ved patil
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
15 views

Assignment 2a

The document contains 8 problems related to calculating electrical quantities like currents, voltages, power for various 3-phase circuits and loads. The problems involve Δ and Y connected loads, unbalanced loads, loads with different impedances connected in parallel, and using the two-wattmeter method to measure power. Calculations include line and phase currents, source voltages, complex power, real power loss and more.

Uploaded by

ved patil
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Assignment 2

1. A balanced Δ-connected load has an impedance of 864 – j252 Ω/phase. The load is fed through a line having
an impedance of 0.5 + j4.0 Ω/phase. The line voltage at the terminals of the load is 120√3 V. Using 𝑉𝑎𝑏 (load
side) as reference, calculate
a) Phase currents of load
b) Line currents
c) Sending end line voltage
d) Complex Power at the load side and real power loss in the line.
[Ans: (a). 0.231∠16.26o A, 0.231∠-103.74o A, 0.231∠-223.74o A; (b). 0.4∠-13.74o A, 0.4∠-133.74o A,
0.4∠-253.74o A; (c) 207.42∠-0.762o V, 207.42∠-119.238o V, 207.42∠-239.238o V; (d). S=(138.24-j40.32) VA
and real power loss = 0.24 W ]

2. For the given circuit (Fig.1), calculate the following, if 𝑍1 = 3 + 𝑗4.0 𝛺, 𝑍2 = 4 + 𝑗3.0 𝛺, 𝑍3 = 5 𝛺. Neglect
line
impedance between load and source.
a) Load phase currents
b) Line currents
c) Source phase currents
[Ans: a) ⃗⃗⃗⃗⃗
𝐼𝐶𝐴=120∠-53.13o A, ⃗⃗⃗⃗⃗
𝐼𝐴𝐵 =120∠-156.87o A,
⃗⃗⃗⃗⃗
𝐼𝐵𝐶 =120∠120o A; b) ⃗⃗⃗⃗⃗
𝐼𝑎𝐶 =239.57∠-56.565o A,
⃗⃗⃗⃗⃗
𝐼𝑏𝐴 =188.79∠165o A, ⃗⃗⃗⃗⃗
𝐼𝑐𝐵 =159.23∠71.565o A;
C) 𝐼⃗⃗⃗⃗⃗ o ⃗⃗⃗⃗⃗
𝑎𝑐 =120.12∠103.1 A, 𝐼𝑐𝑏 =84.72∠-156.29 A,
o

⃗⃗⃗⃗⃗
𝐼𝑏𝑎 =133.63∠-38.36o A Fig. 1

3. A 3-phase, 415 V, 50 Hz supply is feeding an unbalance Y-connected load having phase-a impedance of
10 Ω, phase-b impedance is j10 Ω and phase-c impedance is –j10 Ω. The supply and load neutral points
are not connected. Find the line currents.

[ Ans : 𝐼𝑎 =41.5∠0o A, 𝐼𝑏 =21.482∠-165o A, 𝐼𝑐 =21.482∠165o A ]

4. Repeat the above problem no.3, if the neutral of the load is connected to the neutral of the supply. What
will be neutral wire current?

[ Ans : 𝐼𝑎 =23.96∠0o A, 𝐼𝑏 =23.96∠150o A, 𝐼𝑐 =23.96∠-150o A, 𝐼𝑛 =-17.54∠0o A ]

5. Three balanced 3-phase loads are connected in parallel. Load-1 is Y-connected with an impedance of
(300 + j150) Ω/phase; load-2 is Δ-connected with an impedance of (3600-j2700) Ω/phase and load 3 is
450 kW at 0.8 pf lagging. The load is fed from a distribution line with line impedance of (1+j8) Ω/phase.
The magnitude of phase voltage at load end of the line is 7.5kV. Calculate
a) Total complex power at the sending end of the line.
b) What percentage of the average power at the sending end of the line is delivered to the loads.

[Ans: a) S = (997.26+ j553.08) kVA, b) 99.27% ]

6. The two-wattmeter method produces wattmeter readings P1=1560W, P2=2100W, when connected to a Delta
connected load. The Line-Line voltage of the supply is 220 V. Calculate the phase impedance of the load.

[Ans: Z = 38.44∠14.33o Ω ]
7. The two wattmeter method is used to measure the power in three phase balanced load. Prove that the total
reactive power supplied by the source is Q = √3 (W2-W1).

8. The power in a three phase balanced load is measured using one wattmeter connected as shown in Fig. 2. Find
the power measured by the wattmeter and its relation with the total real/reactive power of the load.

Fig. 2

You might also like