Introduction to IDAPython

Ero Carrera ero.carrera@{gmail.com,f-secure.com}

Abstract

IDAPython is an extension for IDA, the Interactive Disassembler. It brings the power and convenience of Python scripting to aid in the analysis of binaries. This article will cover some basic usage and provide examples to get interested individuals started. We will walk through practical examples ranging from iterating through functions, segments and instructions to data mining the binaries, collecting references and analyzing their structure.

Python and IDA 7 Walking the functions 7 Walking the segments 8 Function connectivity 9 Walking the instructions 10 Cyclomatic complexity 11 Automating IDA through IDAPython 14 Visualizing binaries 16 Projects using IDAPython 18 Function Reference 19 AddEntryPoint() 19 AddHotkey() 19 AltOp() 19 AnalyseArea() 19 AskAddr() 20 AskFile() 20 AskIdent() 20 AskLong() 20 AskSeg() 21 AskSelector() 21 AskStr() 21 AskYN() 21 AutoMark() 22 AutoMark2() 22 AutoUnmark() 22 Batch() 22 Byte() 22 Choose() 23 ChooseFunction() 23 CodeRefsFrom() 23 CodeRefsTo() 23 Comment() 23 DataRefsFrom() 23 DataRefsTo() 24 DelCodeXref() 24 DelExtLnA() 24 DelExtLnB() 24 DelFixup() 24 DelFunction() 25 DelHiddenArea() 25 DelHotkey() 25 DelSelector() 25 Demangle() 25 Drst() 26 DrstB() 26 Dword() 26 Exec() 26 Exit() 26 ExtLinA() 26 ExtLinB() 27 Fatal() 27

FindFuncEnd() 27 FindSelector() 28 FirstSeg() 28 Functions() 28 GetBmaskCmt() 28 GetBmaskName() 29 GetConstBmask() 29 GetConstByName() 29 GetConstCmt() 29 GetConstEnum() 30 GetConstEx() 30 GetConstName() 30 GetConstValue() 30 GetDouble() 31 GetEntryOrdinal() 31 GetEntryPoint() 31 GetEntryPointQty() 31 GetEnum() 31 GetEnumCmt() 31 GetEnumFlag() 32 GetEnumIdx() 32 GetEnumName() 32 GetEnumQty() 32 GetEnumSize() 33 GetFirstBmask() 33 GetFirstConst() 33 GetFirstStrucIdx() 33 GetFixupTgtDispl() 34 GetFixupTgtOff() 34 GetFixupTgtSel() 34 GetFixupTgtType() 34 GetFlags() 34 GetFloat() 35 GetFunctionCmt() 35 GetFunctionFlags() 35 GetFunctionName() 35 GetIdaDirectory() 35 GetIdbPath() 35 GetInputFile() 36 GetInputFilePath() 36 GetLastBmask() 36 GetLastConst() 36 GetLastStrucIdx() 36 GetManualInsn() 37 GetMnem() 37 GetNextBmask() 37 GetNextConst() 37 GetNextFixupEA() 38 GetNextStrucIdx() 38 GetOpType() 38 GetOperandValue() 39 GetOpnd() 39 GetOriginalByte() 40

GetPrevBmask() 40 GetPrevConst() 40 GetPrevFixupEA() 40 GetPrevStrucIdx() 41 GetStringType() 41 GetStrucComment() 41 GetStrucIdByName() 41 GetStrucIdx() 41 GetStrucName() 42 GetStrucQty() 42 GetTrueName() 42 GetTrueNameEx() 42 GetnEnum() 43 Heads() 43 HideArea() 43 INFMAP 43 ItemEnd() 44 ItemSize() 44 Jump() 44 LineA() 44 LineB() 44 LocByName() 45 LocByNameEx() 45 MK_FP() 45 MakeAlign() 45 MakeArray() 45 MakeByte() 46 MakeCode() 46 MakeComm() 46 MakeDouble() 46 MakeDword() 46 MakeFloat() 46 MakeFunction() 47 MakeName() 47 MakeOword() 47 MakePackReal() 47 MakeQword() 47 MakeRptCmt() 48 MakeStr() 48 MakeTbyte() 48 MakeUnkn() 48 MakeVar() 49 MakeWord() 49 Message() 49 Message() 49 Name() 49 NameEx() 50 NextAddr() 50 NextFunction() 50 NextHead() 50 NextNotTail() 51 NextSeg() 51 OpAlt() 51

OpBinary() 51 OpChr() 52 OpDecimal() 52 OpEnumEx() 52 OpHex() 52 OpNot() 52 OpNumber() 52 OpOctal() 52 OpOff() 52 OpOffEx() 53 OpSeg() 54 OpSign() 54 OpStkvar() 54 PatchByte() 54 PatchDword() 54 PatchWord() 54 PrevAddr() 54 PrevFunction() 55 PrevHead() 55 PrevNotTail() 55 RenameEntryPoint() 55 Rrst() 55 Rrst0() 56 RrstB() 56 RrstB0() 56 Rnext() 56 Rnext0() 56 RnextB() 56 RnextB0() 56 RptCmt() 56 RunPlugin() 56 ScreenEA() 57 SegAddrng() 57 SegAlign() 57 SegBounds() 57 SegByName() 57 SegClass() 58 SegComb() 58 SegCreate() 58 SegDelete() 58 SegEnd() 59 SegName() 59 SegRename() 59 SegStart() 59 Segments() 59 SelEnd() 60 SelStart() 60 SetBmaskCmt() 60 SetBmaskName() 60 SetFixup() 60 SetFunctionCmt() 61 SetFunctionEnd() 61 SetFunctionFlags() 61

SetHiddenArea() 61 SetManualInsn() 61 SetSegmentType() 62 SetSelector() 62 SetStatus() 62 Warning() 62 Word() 63 add_dref() 63 add_dref() 63 del_dref() 63 del_dref() 63 refs() 63 Resources 64

Python and IDA

Python is a powerful scripting language which has features greatly appreciated by its followers. Versatility, speed of development and readability are among the top ones. IDA ,(Datarescue 2005), provides the advanced user with IDC, a C-like scripting language to automate some of the tasks of analysis. Yet, compared to Python, IDC feels clumsy and slow. Many times has the author (and others) wished for something more versatile. IDAPython, (Erdlyi 2005), was rst introduced in an earlier joint paper, (Carrera and Erdlyi 2004), where a general overview was given together with minimal examples comparing IDC and equivalent Python scripts. Python goes well beyond the possibilities of IDC by providing networking support, avanced I/O and a host of other features not available in IDC at all. In this article, a series of examples will be introduced in order to get acquainted with IDAPython and its possibilities. The examples presented in this paper are known to work with IDA 4.8 and IDAPython 0.7.0. running under Linux. IDAPython keeps the same global dictionary regardless of the input method. Whether Python code is run from external les or typed in its notepad, the data is persistent. This is extremely convenient as one might want to run a script that will gather and parse certain data but does not yet know, or want to, do anything further with it. Having such data always accessible sets a wonderful environment for poking and tinkering around. IDAPython provides the full API available to those writing plugins and also the well known IDC functions. Its possible to access nearly anything within IDAs database.

Walking the functions As an introductory script, the rst example will loop through all the functions IDA has found and any others the user has dened, and will print their effective addresses and names. (The script is nearly identical to one of the examples in (Carrera and Erdlyi 2004))

Walk the functions

# Get the segment's starting address ea = ScreenEA() # Loop through all the functions for function_ea in Functions(SegStart(ea), SegEnd(ea)): # Print the address and the function name. print hex(function_ea), GetFunctionName(function_ea)

Functions such as ScreenEA and GetFunctionName exist also in IDC and documentation for them can be found at . The functions Functions(), is provided by IDAPythons idautils module, which is automatically imported on load.

Walking the segments This example will loop though all segments and fetch their data, byte by byte, storing it in a Python string. Going through the segments
segments = dict() # For each segment for seg_ea in Segments(): data = [] # For each byte in the address range of the segment for ea in range(seg_ea, SegEnd(seg_ea)): # Fetch byte data.append(chr(Byte(ea))) # Put the data together segments[SegName(seg_ea)] = ''.join(data) # Loop through the dictionary and print the segment's names # and their sizes for seg_name, seg_data in segments.items(): print seg_name, len(seg_data)

The function Segments() is again provided by idautils. Byte(), SegEnd() and SegName() exist in IDC and their functionality is quite self-evident.

Function connectivity The third example is a bit more elaborate. It will go through all the functions and will nd all the calls performed to and from each of them. The references will be stored in two dictionaries and, in the end, a list of functions with their indegree and outdegree will be shown. Indegree and outgedree of functions
from sets import Set # Get the segment's starting address ea = ScreenEA() callers = dict() callees = dict() # Loop through all the functions for function_ea in Functions(SegStart(ea), SegEnd(ea)): f_name = GetFunctionName(function_ea) # Create a set with all the names of the functions calling (referring to) # the current one. callers[f_name] = Set(map(GetFunctionName, CodeRefsTo(function_ea, 0))) # For each of the incoming references for ref_ea in CodeRefsTo(function_ea, 0): # Get the name of the referring function caller_name = GetFunctionName(ref_ea) # Add the current function to the list of functions # called by the referring function callees[caller_name] = callees.get(caller_name, Set()) callees[caller_name].add(f_name) # Get the list of all functions functions = Set(callees.keys()+callers.keys()) # For each of the functions, print the number of functions calling it and # number of functions being called. In short, indegree and outdegree for f in functions: print '%d:%s:%d' % (len(callers.get(f, [])), f, len(callees.get(f, [])))

Walking the instructions The fourth example will take us to the instruction level. For each segment, we will walk through all the dened elements, by means of Heads(start address, end address) and check whether the element dened at each address is an instruction; if so, the mnemonic will be fetched and its occurrence count will be updates in the mnemonics dictionary. Finally, the mnemonics and their number of occurrences are shown.

Nmemonics histogram
mnemonics = dict() # For each of the segments for seg_ea in Segments(): # For each of the dened elements for head in Heads(seg_ea, SegEnd(seg_ea)): # If it's an instruction if isCode(GetFlags(head)): # Get the mnemonic and increment the mnemonic # count mnem = GetMnem(head) mnemonics[mnem] = mnemonics.get(mnem, 0)+1 # Sort the mnemonics by number of occurrences sorted = map(lambda x:(x[1], x[0]), mnemonics.items()) sorted.sort() # Print the sorted list for mnemonic, count in sorted: print mnemonic, count

Cyclomatic complexity The next example goes a bit further. It will go through all the functions and for each of them it will compute the Cyclomatic Complexity. The Cyclomatic Complexity measures the complexity of the code by looking at the nodes and edges (basic blocks and branches) of the graph of a function. It is usually dened as:

CC = Edges N odes + 2
The function cyclomatic_complexity() will compute its value, given the functions start address as input. The example can be run in two different modes. The rst one is invoked as usual, through IDAPython, by locating the Python script and running it. A second way is to launch IDA and make it run the script in batch mode; that will be explored in the next section. In this example function chunks are not considered. IDA added in recent versions, support for function chunks, which are a result of some compilers optimization process. It is possible to walk the chunks by using the function API function func_tail_iterator_t() . The following code shows how to iterate through the chunks.

Collecting function chunks

function_chunks = [] #Get the tail iterator func_iter = func_tail_iterator_t(get_func(ea)) # While the iterators status is valid status = func_iter.main() while status: # Get the chunk chunk = func_iter.chunk() # Store its start and ending address as a tuple function_chunks.append((chunk.startEA, chunk.endEA)) # Get the last status status = func_iter.next()

Cyclomatic Complexity
import os from sets import Set def cyclomatic_complexity(function_ea): """Calculate the cyclomatic complexity measure for a function. Given the starting address of a function, it will nd all the basic block's boundaries and edges between them and will return the cyclomatic complexity, dened as: CC = Edges - Nodes + 2 """ f_start = function_ea f_end = FindFuncEnd(function_ea) edges = Set() boundaries = Set((f_start,)) # For each dened element in the function. for head in Heads(f_start, f_end): # If the element is an instruction if isCode(GetFlags(head)): # Get the references made from the current instruction and keep only the ones local to # the function. refs = CodeRefsFrom(head, 0) refs = Set(lter(lambda x: x>=f_start and x<=f_end, refs)) if refs: # If the ow continues also to the next (address-wise) instruction, we add a reference to it. # For instance, a conditional jump will not branch if the condition is not met, so we save that # reference as well. next_head = NextHead(head, f_end) if isFlow(GetFlags(next_head)): refs.add(next_head) # Update the boundaries found so far. boundaries.union_update(refs) # For each of the references found, and edge is created. for r in refs: # If the ow could also come from the address previous to the destination of the branching # an edge is created. if isFlow(GetFlags(r)): edges.add((PrevHead(r, f_start), r)) edges.add((head, r)) return len(edges) - len(boundaries) + 2

Cyclomatic Complexity
def do_functions(): cc_dict = dict() # For each of the segments for seg_ea in Segments(): # For each of the functions for function_ea in Functions(seg_ea, SegEnd(seg_ea)): cc_dict[GetFunctionName(function_ea)] = cyclomatic_complexity(function_ea) return cc_dict # Wait until IDA has done all the analysis tasks. # If loaded in batch mode, the script will be run before everything is nished, so the script will explicitly # wait until the autoanalysis is done. autoWait() # Collect data cc_dict = do_functions() # Get the list of functions and sort it. functions = cc_dict.keys() functions.sort() ccs = cc_dict.values() # If the environment variable IDAPYTHON exists and its value is 'auto' the results will be appended # to a data le and the script will quit IDA. Otherwise it will just output the results if os.getenv('IDAPYTHON') == 'auto': results = le('example5.dat', 'a+') results.write('%3.4f,%03d,%03d %s\n' % ( sum(ccs)/oat(len(ccs)), max(ccs), min(ccs), GetInputFile())) results.close() Exit(0) else: # Print the cyclomatic complexity for each of the functions. for f in functions: print f, cc_dict[f] # Print the maximum, minimum and average cyclomatic complexity. print 'Max: %d, Min: %d, Avg: %f' % (max(ccs), min(ccs), sum(ccs)/oat(len(ccs)))

Automating IDA through IDAPython As mentioned in the last section, the previous example has a a second way of operating. IDAPython now supports to run Python scripts on start up, from the command line. Such functionality comes handy, to say the least, when analyzing a set of binaries in batch mode. The switch -OIDAPython:/path/to/python/script.py can be used to tell IDAPython which script to run. Another switch which might come handy is -A which will instruct IDA to run in batch mode, not asking anything, just performing the auto-analysis. With those two options combined it is possible to auto-analyze a binary and run a Python script to perform some mining. A function which will be usually required is autoWait() which will instruct the Python script to wait until IDA is done performing the analysis. It is a good idea to call it in the beginning of any script. To analyze a bunch of les a command like the following could be entered (if working in Bash on Linux).
for virus in virus/*.idb; do IDAPYTHON='auto' idal -A -OIDAPython:example5.py $virus; done

It will go through all the .idb les in the virus/ directory and will invoke idal which each of them, running the script example5.py on load. The script is the one in the last example. If it nds the environment variable IDAPYTHON, it will just collect the data and append it to a le instead of showing it in IDAs messages window. Subsequently it will call Exit() to close the database and quit. It would be equally easy to batch mode analyze a set of executables. If IDB les are given, IDA will just load them and no auto-analysis will be performed; otherwise, if a binary le is provided the analysis will be done and the script run once nished. All this allows for a good degree of automation in analysis of a set of binaries. For instance, the next table is the output of running the previous script on a bunch of malware IDBs. A nice feature is to see the clear clustering of the families by their cyclomatic complexity features.

Output of running the example in batch mode on a set of malware binaries. Sample Cyclomatic complexity Avg, Max, Min, Filename
7.4197,148,001 klez_a.ex 7.4975,148,001 klez_b.ex 7.5972,148,001 klez_c.ex 7.5972,148,001 klez_d.ex 7.0349,148,001 klez_e.ex 7.0502,148,001 klez_f.ex 7.0502,148,001 klez_g.ex 7.0573,148,001 klez_h.ex 7.0573,148,001 klez_i.ex 7.0502,148,001 klez-j.ex 3.2190,052,001 mimailA.ex_.1.unp 3.2353,052,001 mimailB.ex_ 3.2313,052,001 mimailC.ex_.1.unp 3.4148,052,001 mimailD.ex_ 2.8110,052,001 mimailE.ex_.1.unp 2.7953,052,001 mimailF.ex_.1.unp 2.7638,052,001 mimailG.ex_.1.unp 2.7874,052,001 mimailH.ex_.1.unp 2.8376,052,001 mimailI.ex_.1.unp 2.8632,052,001 mimailJ.ex_ 2.8984,052,001 mimailL.ex_.1.unp 2.8231,052,001 mimail-m_u.ex 3.4375,052,001 outlook_.dmp 3.1138,052,001 mimail-s_u.ex 6.5301,039,001 sasser.avpe 6.5422,039,001 sasser-b.avpe 6.6098,039,001 sasser-c.avpe 6.5955,041,001 sasser-d.ex_unp.exe 6.5444,041,001 sasser-e.unp 6.8452,041,001 sasser-f.unp 8.0000,041,001 sasser-g.unp 7.3505,041,001 netskyaa.unp 7.4947,041,001 netsky_unk.unp 7.1667,041,001 netsky_ac.ex_unp 5.9694,051,001 Netsky.AD.unp 7.3125,041,001 virus.ex_.1.unp 7.2478,041,001 your_details.doc.exe.2.unp 8.0407,123,001 usercong9x.dl.1.unp 7.9068,041,001 netsky-q-dll.unp 7.9068,041,001 netsky-q-dll.unp 7.5702,041,001 netsky-r-dll_unp_.exe 7.5657,041,001 list0_unp_.pif 7.5743,041,001 private.unp.pi_ 7.5268,041,001 netsky_v_unp_.exe 7.8824,041,001 netsky-w.unp 6.8165,041,001 netsky.pif.2.unp

Klez

Mimail

Sasser

Netsky

Visualizing binaries This example is based on the one collecting the indegrees and outdegree of all functions. This time, we will use that information to generate a graph of the call-tree and plot it using pydot, (Carrera 2005a); a package to interface Graphviz, (Ellson et al. 2005). The code follows, the only changes from the example it is based on, are the lines creating the graph, setting some defaults and then adding the edges. Visualizing binaries
from sets import Set import pydot # Get the segment's starting address ea = ScreenEA() callees = dict() # Loop through all the functions for function_ea in Functions(SegStart(ea), SegEnd(ea)): f_name = GetFunctionName(function_ea) # For each of the incoming references for ref_ea in CodeRefsTo(function_ea, 0): # Get the name of the referring function caller_name = GetFunctionName(ref_ea) # Add the current function to the list of functions called by the referring function callees[caller_name] = callees.get(caller_name, Set()) callees[caller_name].add(f_name) # Create graph g = pydot.Dot(type='digraph') # Set some defaults g.set_rankdir('LR') g.set_size('11,11') g.add_node(pydot.Node('node', shape='ellipse', color='lightblue', style='lled')) g.add_node(pydot.Node('edge', color='lightgrey')) # Get the list of all functions functions = callees.keys() # For each of the functions and each of the called ones, add the corresponding edges. for f in functions: if callees.has_key(f): for f2 in callees[f]: g.add_edge(pydot.Edge(f, f2)) # Write the output to a Postscript le g.write_ps('example6.ps')

Some examples output is shown next, the different plots are obtained by using the different plotting utilities provided by Graphviz.

send

sub_40107A
sprintf

sub_401020

sub_402AF3 RtlZeroMemory

RegEnumValueA
memcpy sub_402946

sub_40109A StartAddress

GetNetworkParams

inet_addr

ioctlsocket MXLookup sub_401020 ntohs

sub_4043B5 GetWindowTextA GetForegroundWindow EnumerateShellFolders sub_4050BC sub_401381 sub_405100 FormatMessageA

raise

signal

THREAD_MassMail sub_404BB2

sub_40107A sub_40109A raise

RtlUnwind

sub_403FB6
select

strcat sub_402946 SysAllocString sub_404751 strlen sub_401401 sub_4030F2 printf htons sub_403976 sub_403F26 CoCreateInstance socket CLSIDFromString sub_40311F sub_4031F6 su

signal recv

WSAGetLastError sub_401E58 HandleSMTPReplyCode closesocket sub_403FB6 sub_4021DA TerminateThread

CoInitialize CoUninitialize strcmp Sleep GetTickCount sub_405608 memcpy sub_40 CreateThread

sub_405608 gethostbyname GetTickCount

HandleSMTPReplyCode

send
THREAD_MassMail strchr fgets

sub_4032D7 fclose sub_401E58

THREAD_SpreadInMail

sub_401BE7

sub_4050BC

gethostbyname

Sleep

closesocket
AddBoundary strlen

connect
sub_404E05 THREAD_SpreadInMail

free

sub_403F7B fopen sub_401469

CoCreateInstance

CLSIDFromString GetForegroundWindow

Mime64Encode sub_402AF3
Mime64Encode malloc

DeleteFileA sub_40171A

recv

fprintf

GetWindowTextA

sub_404751

sub_40311F sub_4032D7 sub_4031F6

sub_4030F2

FormatMessageA

select

malloc sub_402BFD

RecursiveFileSearch

sub_403F26 sub_403976

WSAGetLastError

MXLookup sub_402E85 sub_40126A

SysAllocString

CoUninitialize printf CoInitialize

GetNetworkParams fwrite inet_addr

ReadFile

sub_404FB8

fread _fileno _filelength

CreateFileA CloseHandle ReadFile

ioctlsocket

GetRandomString sub_401401

ntohs

GetFileSize sub_402DC8 sub_4052B4 main AssembleClassInfo

sub_4052B4

sub_4054DF

sub_40126A sub_402E85 GetFileSize sub_40171A sub_402DC8

strncmp

sub_40130C

sub_4012ED

sub_4055A4 strncat GetMessageA SetTimer DispatchMessageA sub_401250 WSAStartup GetWindowsDirectoryA MessageBoxA CreateWindowExA strnc strncpy LoadLibraryA RegisterClassA GetProcAddress TranslateMessage Install GetModuleHandleA sub_4054DF

free

LoadCursorA LoadIconA GetStockObject

strncpy

sub_4043B5 CreateFileA strncat CloseHandle strcmp

start

WSAStartup

sub_404BB2

RecursiveFileSearch FindFirstFileA fopen

FindNextFileA

sub_405100

WinExec CopyFileA RegSetValueExA RegOpenKeyA GetCommandLineA RegCloseKey

sub_402BFD

fclose sub_403F7B

sub_401381

fprintf

_filelength sub_401469 GetSystemTimeAsFileTime

sub_404FB8

fread StartAddress

FileTimeToDosDateTime

_fileno EnumerateShellFolders RegEnumValueA fwrite

MessageBoxA

strcpy

CreateWindowExA

TranslateMessage DeleteFileA

strcat

GetProcAddress main RegisterClassA

RegOpenKeyA

LoadLibraryA __GetMainArgs Install start sub_4055A4 GetMessageA exit SetTimer

RegCloseKey

RegSetValueExA

CopyFileA

WinExec sub_401250 GetModuleHandleA DispatchMessageA GetWindowsDirectoryA

GetCommandLineA CreateThread LoadIconA

AssembleClassInfo

GetStockObject

LoadCursorA

noname

DefWindowProcA

PostQuitMessage

KillTimer

Projects using IDAPython It might be also useful to check some already existing projects based solely on IDAPython. Some of them are: idb2reml, (Carrera 2005); will export IDB information to a XML format, REML (ReverseEngineering ML) pyreml, (Carrera 2005a); loads the REML produced by idb2reml and provides a set of functions to perform advanced analysis.

Function Reference

AddEntryPoint()
Add entry point










ordinal



ea name

makecode

returns:



- entry point number if entry point doesn't have an ordinal number, 'ordinal' should be equal to 'ea' - address of the entry point - name of the entry point. If null string, the entry point won't be renamed. - if 1 then this entry point is a start of a function. Otherwise it denotes data bytes. 0 - entry point with the specifed ordinal already exists 1 - ok

AddHotkey()
Add hotkey for IDC function

Arguments:



hotkey - hotkey name ('a', "Alt-A", etc) idcfunc - IDC function name
GUI version doesn't support hotkeys Returns: -

AltOp()
Get manually entered operand string





Arguments: ea - linear address n - number of operand: 0 - the first operand 1 - the second operand Returns: string or None if it fails

AnalyseArea()

Perform full analysis of the area

Arguments: sEA - starting linear address eEA - ending linear address (excluded) Returns: 1-ok, 0-Ctrl-Break was pressed.

AskAddr()
Ask the user to enter an address




Arguments: defval - the default address value. This value will appear in the dialog box. prompt - the prompt to display in the dialog box Returns: the entered address or BADADDR.

AskFile()
Ask the user to choose a file




Arguments: forsave - 0: "Open" dialog box, 1: "Save" dialog box mask - the input file mask as "*.*" or the default file name. prompt - the prompt to display in the dialog box Returns: the selected file or 0.

AskIdent()
Ask the user to enter an identifier




Arguments: defval - the default identifier. This value will appear in the dialog box. prompt - the prompt to display in the dialog box Returns: the entered identifier or 0.

AskLong()
Ask the user to enter a number

Arguments: defval - the default value. This value will appear in the dialog box. prompt - the prompt to display in the dialog box Returns: the entered number or -1.

AskSeg()
Ask the user to enter a segment value




Arguments: defval - the default value. This value will appear in the dialog box. prompt - the prompt to display in the dialog box Returns: the entered segment selector or BADSEL.

AskSelector()
Get a selector value




sel - the selector number (16bit value) returns:

note: selector value if found otherwise the input value (sel) selector values are always in paragraphs

AskStr()
Ask the user to enter a string





Arguments: defval - the default string value. This value will appear in the dialog box. prompt - the prompt to display in the dialog box Returns: the entered string or 0. FIXME: Doublecheck the history type

AskYN()
Ask the user a question and let him answer Yes/No/Cancel
Arguments:

efval - the default answer. This answer will be selected if the user presses Enter. -1:cancel,0-no,1-ok prompt - the prompt to display in the dialog box Returns: -1:cancel,0-no,1-ok

AutoMark()
Plan to analyse an address

AutoMark2()
Plan to perform an action in the future.
This function will put your request to a special autoanalysis queue.
Later IDA will retrieve the request from the queue and process
it. There are several autoanalysis queue types. IDA will process all
queries from the first queue and then switch to the second queue, etc.

AutoUnmark()
Remove range of addresses from a queue.

Batch()
Enable/disable batch mode of operation




Arguments: batch - Batch mode 0 - ida will display dialog boxes and wait for the user input 1 - ida will not display dialog boxes, warnings, etc. Returns: old balue of batch flag

Byte()
Get value of program byte
ea - linear address

returns: value of byte. If byte has no value then returns 0xFF

If the current byte size is different from 8 bits, then the returned value

might have more 1's.

To check if a byte has a value, use functions hasValue(GetFlags(ea))

Choose()
Choose - class for choose() with callbacks

ChooseFunction()
Ask the user to select a function




Arguments: title - title of the dialog box Returns: -1 - user refused to select a function otherwise returns the selected function start address

CodeRefsFrom()
Get a list of code references from 'ea'



ea - Target address flow - 0 - don't follow normal code flow - 1 - follow code flow Return: list of references (may be empty list)

CodeRefsTo()
Get a list of code references to 'ea'



ea - Target address flow - 0 - don't follow normal code flow - 1 - follow code flow Return: list of references (may be empty list)

Comment()
Get regular indented comment

Arguments:
ea - linear address
Returns: string or None if it fails

DataRefsFrom()

Get a list of data references from 'ea'

ea - Target address

Return: list of references (may be empty list)

DataRefsTo()
Get a list of data references to 'ea'

ea - Target address

Return: list of references (may be empty list)

DelCodeXref()
Unmark exec flow 'from' 'to'

undef - make 'To' undefined if no more references to it returns 1 - planned to be made undefined

DelExtLnA()
Delete an additional anterior line



Arguments: ea n - linear address - number of anterior additioal line (0..500)

Returns: -

DelExtLnB()
Delete an additional posterior line



Arguments: ea n - linear address - number of posterior additioal line (0..500)

Returns: -

DelFixup()
Delete fixup information

ea - address to delete fixup information about returns: none

DelFunction()
Delete a function


ea - any address belonging to the function returns: !=0 - ok

DelHiddenArea()
Delete a hidden area


Arguments: ea - any address belonging to the hidden area Returns: !=0 - ok

DelHotkey()
Delete IDC function hotkey

Arguments: hotkey - hotkey code to delete

DelSelector()
Delete a selector


sel - the selector number to delete returns: note: nothing if the selector is found, it will be deleted

Demangle()
Demangle a name



name - name to demangle disable_mask - a mask that tells how to demangle the name

it is a good idea to get this mask using

GetLongPrm(INF_SHORT_DN) or GetLongPrm(INF_LONG_DN)

Returns: a demangled name

If the input name cannot be demangled, returns 0

Drst()
Get first referred address

DrstB()
Get first referee address

Dword()
Get value of program double word (4 bytes)



ea - linear address returns: the value of the double word. If double word has no value
then returns 0xFFFFFFFF.

Exec()
Execute an OS command.



Arguments: command - command line to execute Returns: error code from OS

Note:
IDA will wait for the started program to finish.
In order to start the command in parallel, use OS methods.
For example, you may start another program in parallel using "start" command.

Exit()
Stop execution of IDC program, close the database and exit to OS

Arguments:
code - code to exit with.
Returns: -

ExtLinA()

Specify an additional line to display before the generated ones.

no
is
Arguments: ea - linear address n - number of anterior additioal line (0..MAX_ITEM_LINES) line - the line to display Returns: Notes: IDA displays additional lines from number 0 up to the first unexisting additional line. So, if you specify additional line #150 and there is additional line #149, your line will not be displayed. defined in IDA.CFG MAX_ITEM_LINES

ExtLinB()
Specify an additional line to display after the generated ones.







no
is
Arguments: ea - linear address n - number of posterior additioal line (0..MAX_ITEM_LINES) line - the line to display Returns: IDA displays additional lines from number 0 up to the first unexisting additional line. So, if you specify additional line #150 and there is additional line #149, your line will not be displayed. defined in IDA.CFG MAX_ITEM_LINES

Fatal()
Display a fatal message in a message box and quit IDA

format - message to print

FindFuncEnd()
# *********************************************** # ** Determine a new function boundaries # ** # arguments: ea - starting address of a new function

# # # # # tion

returns:

if a function already exists, then return its end address. if a function end cannot be determined, the return BADADDR otherwise return the end address of the new func-

FindSelector()
Find a selector which has the specifed value




val - value to search for returns:

note: 16bit selector number if found otherwise the input value (val 0xFFFF) selector values are always in paragraphs

FirstSeg()
Get first segment

returns: linear address of the start of the first segment
BADADDR - no segments are defined

Functions()
Get a list of functions







In: start - start address end - end address Return: list of heads between start and end Note: The last function that starts before 'end' is included even if it extends beyond 'end'.

GetBmaskCmt()
Get bitmask comment (only for bitfields)

Arguments:

enum_id - id of enum bmask - bitmask of the constant repeatable - type of comment, 0-regular, 1-repeatable Returns: comment attached to bitmask if it exists. otherwise returns 0. FIXME: Check the return value

GetBmaskName()
Get bitmask name (only for bitfields)





Arguments: enum_id - id of enum bmask - bitmask of the constant Returns: name of bitmask if it exists. otherwise returns 0. FIXME: Check the return value

GetConstBmask()
Get bit mask of symbolic constant



Arguments: const_id - id of symbolic constant Returns: bitmask of constant or 0 ordinary enums have bitmask = -1

GetConstByName()
Get member of enum - a symbolic constant ID



Arguments: name - name of symbolic constant Returns: ID of constant or -1 FIXME: Need to check the return type!

GetConstCmt()
Get comment of a constant

Arguments:

const_id - id of const repeatable - 0:get regular comment 1:get repeatable comment Returns: comment string

GetConstEnum()
Get id of enum by id of constant


Arguments: const_id - id of symbolic constant Returns: id of enum the constant belongs to. -1 if const_id is bad.

GetConstEx()
Get id of constant








Arguments: enum_id - id of enum value - value of constant serial - serial number of the constant in the enumeration. See OpEnumEx() for details. bmask - bitmask of the constant ordinary enums accept only -1 as a bitmask Returns: id of constant or -1 if error

GetConstName()
Get name of a constant



Arguments: const_id - id of const Returns: name of constant

GetConstValue()
Get value of symbolic constant


Arguments: const_id - id of symbolic constant Returns: value of constant or 0

GetDouble()
Get value of a floating point number (8 bytes)

Arguments:
ea - linear address
Returns: double

GetEntryOrdinal()
Retrieve entry point ordinal number


index - 0..GetEntryPointQty()-1 returns:

0 if entry point doesn't exist otherwise entry point ordinal

GetEntryPoint()
Retrieve entry point address





ordinal - entry point number
it is returned by GetEntryPointOrdinal() returns:





-1 if entry point doesn't exist otherwise entry point address. If entry point address is equal to its ordinal number, then the entry point has no ordinal.

GetEntryPointQty()
retrieve number of entry points
returns: number of entry points

GetEnum()
Get enum ID by the name of enum



Arguments: name - name of enum returns: ID of enum or -1 if no such enum exists

GetEnumCmt()

Get comment of enum

Arguments: enum_id - ID of enum repeatable - 0:get regular comment 1:get repeatable comment Returns: comment of enum

GetEnumFlag()
Get flag of enum



Arguments: enum_id - ID of enum Returns: flags of enum. These flags determine representation of numeric constants (binary,octal,decimal,hex) in the enum definition. See start of this file for more information about flags. Returns 0 if enum_id is bad.

GetEnumIdx()
Get serial number of enum by its ID



Arguments: enum_id - ID of enum Returns: (0..GetEnumQty()-1) or -1 if error

GetEnumName()
Get name of enum


Arguments: enum_id - ID of enum Returns: name of enum or empty string

GetEnumQty()
Get number of enum types

Arguments: Returns: none number of enumerations

GetEnumSize()
Get size of enum



Arguments: enum_id - ID of enum Returns: number of constants in the enum Returns 0 if enum_id is bad.

GetFirstBmask()
Get first bitmask in the enum (bitfield)





Arguments: enum_id - id of enum (bitfield) Returns: the smallest bitmask of constant or -1 no bitmasks are defined yet All bitmasks are sorted by their values as unsigned longs.

GetFirstConst()
Get first constant in the enum






Arguments: enum_id - id of enum bmask - bitmask of the constant ordinary enums accept only -1 as a bitmask returns: value of constant or -1 no constants are defined All constants are sorted by their values as unsigned longs.

GetFirstStrucIdx()
Get index of first structure type

In: none returns: -1 if no structure type is defined index of first structure type. Each structure type has an index and ID. INDEX determines position of structure definition in the list of structure definitions. Index 1 is listed first, after index 2 and so on. The index of a structure type can be changed any time, leading to movement of the structure definition

in the list of structure definitions. ID uniquely denotes a structure type. A structure gets a unique ID at the creation time and this ID can't be changed. Even when the structure type gets deleted, its ID won't be resued in the future.

GetFixupTgtDispl()
Get fixup target displacement


ea - address to get information about returns:


-1 - no fixup at the specified address
otherwise returns fixup target displacement

GetFixupTgtOff()
Get fixup target offset


ea - address to get information about returns:

-1 - no fixup at the specified address
otherwise returns fixup target offset

GetFixupTgtSel()
Get fixup target selector


ea - address to get information about returns:

-1 - no fixup at the specified address
otherwise returns fixup target selector

GetFixupTgtType()
Get fixup target type


ea - address to get information about returns:

-1 - no fixup at the specified address
otherwise returns fixup target type:

GetFlags()
Get internal flags
ea - linear address

returns: 32-bit value of internal flags. See start of IDC.IDC file

for explanations.

GetFloat()
Get value of a floating point number (4 bytes)

Arguments:
ea - linear address
Returns: float

GetFunctionCmt()
Retrieve function comment




ea - any address belonging to the function repeatable - 1: get repeatable comment

0: get regular comment returns: function comment string

GetFunctionFlags()
Retrieve function flags

arguments: returns: ea - any address belonging to the function -1 - function doesn't exist otherwise returns the flags

GetFunctionName()
Retrieve function name


ea - any address belonging to the function returns:

null string - function doesn't exist otherwise returns function name

GetIdaDirectory()
Get IDA directory
This function returns the directory where IDA.EXE resides

GetIdbPath()

Get IDB full path

This function returns full path of the current IDB database

GetInputFile()
Get input file name
This function returns name of the file being disassembled

GetInputFilePath()
Get input file path
This function returns the full path of the file being disassembled

GetLastBmask()
Get last bitmask in the enum (bitfield)



Arguments: enum_id - id of enum Returns: the biggest bitmask or -1 no bitmasks are defined yet All bitmasks are sorted by their values as unsigned longs.

GetLastConst()
Get last constant in the enum







Arguments: enum_id - id of enum bmask - bitmask of the constant ordinary enums accept only -1 as a bitmask Returns: value of constant or -1 no constants are defined All constants are sorted by their values as unsigned longs.

GetLastStrucIdx()
Get index of last structure type

Arguments: none

returns:

-1 if no structure type is defined index of last structure type. See GetFirstStrucIdx() for the explanation of structure indices and IDs.

GetManualInsn()
Get manual representation of instruction

ea - linear address

This function returns value set by SetManualInsn earlier.

GetMnem()
Get instruction mnemonics




ea - linear address of instruction returns: "" - no instruction at the specified location note: this function may not return exactly the same mnemonics as you see on the screen.

GetNextBmask()
Get next bitmask in the enum (bitfield)






Arguments: enum_id - id of enum bmask - value of the current bitmask Returns: value of a bitmask with value higher than the specified value. -1 if no such bitmasks exist. All bitmasks are sorted by their values as unsigned longs.

GetNextConst()
Get next constant in the enum





Arguments: enum_id - id of enum bmask - bitmask of the constant ordinary enums accept only -1 as a bitmask value - value of the current constant

Returns: value of a constant with value higher than the specified value. -1 no such constants exist. All constants are sorted by their values as unsigned longs.

GetNextFixupEA()
Find next address with fixup information


ea - current address returns:

-1 - no more fixups otherwise returns the next
address with fixup information

GetNextStrucIdx()
Get index of next structure type





Arguments: index Returns:

current structure index -1 if no (more) structure type is defined

index of the next structure type.
See GetFirstStrucIdx() for the explanation of
structure indices and IDs.

GetOpType()
Get type of instruction operand



















ea - linear address of instruction n - number of operand:
0 - the first operand
1 - the second operand Returns:
-1
0
1
2
3
4
5
6
7 PC:
8
9
10
11
12

bad operand number passed None General Register Memory Reference Base + Index Base + Index + Displacement Immediate Immediate Far Address (with a Segment Selector) Immediate Near Address 386 386 386 FPP MMX Trace register Debug register Control register register register

8051:
8
9
10 80196:
8
9
10
11 ARM:
8
9
10
11
12 PPC:
8
9
10
11
12 TMS320C5:
8
9
10 TMS320C6:
8 Z8:
8
9 Z80:
8

bit /bit bit [intmem] [intmem]+ offset[intmem] bit shifted register MLA operands register list (for LDM/STM) coprocessor register list (for CDP) coprocessor register (for LDC/STC) SPR 2 FPRs SH MB ME CR field CR bit bit bit not condition register pair (A1:A0..B15:B14) @intmem @Rx condition

GetOperandValue()
Get number used in the operand







This function returns an immediate number used in the operand Arguments: ea - linear address of instruction n - number of operand: 0 - the first operand 1 - the second operand Returns: value If the operand doesn't contain a number, it returns -1.

GetOpnd()

Get operand of an instruction

ea - linear address of instruction n - number of operand:
0 - the first operand
1 - the second operand returns: the current text representation of operand

GetOriginalByte()
Get original value of program byte

ea - linear address returns: the original value of byte before any patch applied to it

GetPrevBmask()
Get prev bitmask in the enum (bitfield)






Arguments: enum_id - id of enum value - value of the current bitmask Returns: value of a bitmask with value lower than the specified value. -1 no such bitmasks exist. All bitmasks are sorted by their values as unsigned longs.

GetPrevConst()
Get prev constant in the enum









Arguments: enum_id - id of enum bmask - bitmask of the constant ordinary enums accept only -1 as a bitmask value - value of the current constant Returns: value of a constant with value lower than the specified value. -1 no such constants exist. All constants are sorted by their values as unsigned longs.

GetPrevFixupEA()
Find previous address with fixup information

ea - current address returns:

-1 - no more fixups otherwise returns the
previous address with fixup information

GetPrevStrucIdx()
Get index of previous structure type




Arguments: Returns:





current structure index -1 if no (more) structure type is defined
index of the presiouvs structure type.
See GetFirstStrucIdx() for the explanation of
structure indices and IDs.

GetStringType()
Get string type

ea - linear address Returns one of ASCSTR_... constants

GetStrucComment()
Get structure type comment





Arguments: id - structure type ID repeatable - 1: get repeatable comment


0: get regular comment Returns:


null string if bad structure type ID is passed
otherwise returns comment.

GetStrucIdByName()
Get structure ID by structure name


Arguments:
structure type name Returns:

-1 if bad structure type name is passed
otherwise returns structure ID.

GetStrucIdx()

Get structure index by structure ID

Arguments: Returns:





structure ID -1 if bad structure ID is passed
otherwise returns structure index.
See GetFirstStrucIdx() for the explanation of
structure indices and IDs.

GetStrucName()
Get structure type name


Arguments:
structure type ID Returns:


-1 if bad structure type ID is passed
otherwise returns structure type name.

GetStrucQty()
Get number of defined structure types


In: none returns: number of structure types

GetTrueName()
Get true name of program byte


This function returns name of byte as is without any replacements. ea - linear address

returns: "" - byte has no name

GetTrueNameEx()
Get true name of program byte





This function returns name of byte as is without any replacements. from - the referring address. Allows to retrieve local label addresses in functions. If a local name is not found, then a global name is returned. ea - linear address returns: "" - byte has no name

GetnEnum()
Get ID of the specified enum by its serial number



Arguments: idx - number of enum (0..GetEnumQty()-1) Returns: ID of enum or -1 if error

Heads()
Get a list of heads (instructions or data)


In: start - start address (this one is always included) end - end address

Return: list of heads between start and end

HideArea()
Hide an area
Hidden areas - address ranges which can be replaced by their descriptions






arguments: start,end description header footer visible Returns: area boundaries description to display if the area is collapsed header lines to display if the area is expanded footer lines to display if the area is expanded the area state

!=0 - ok

INFMAP
dict() -> new empty dictionary. dict(mapping) -> new dictionary initialized from a mapping object's (key, value) pairs. dict(seq) -> new dictionary initialized as if via: d = {} for k, v in seq: d[k] = v

dict(**kwargs) -> new dictionary initialized with the name=value pairs in the keyword argument list. For example: dict(one=1, two=2)

ItemEnd()
Get address of the end of the item (instruction or data)

ea - linear address
returns: address past end of the item at 'ea'

ItemSize()
Get size of instruction or data item in bytes

ea - linear address returns: 1..n

Jump()
Move cursor to the specifed linear address
ea - linear address

LineA()
Get anterior line





Arguments: ea - linear address num - number of anterior line (0..MAX_ITEM_LINES) MAX_ITEM_LINES is defined in IDA.CFG Returns: anterior line string

LineB()
Get posterior line



Arguments: ea - linear address num - number of posterior line (0..MAX_ITEM_LINES) Returns: posterior line string

LocByName()
Get linear address of a name



name - name of program byte Returns: address of the name

badaddr - no such name

LocByNameEx()
Get linear address of a name





fromaddr - the referring address. Allows to retrieve local label addresses in functions. If a local name is not found, then address of a global name is returned. name - name of program byte Returns: address of the name (BADADDR - no such name)

MK_FP()
Return value of expression: ((seg4) + off)

MakeAlign()
Convert the current item to an alignment directive





ea count align - linear address - number of bytes to convert - 0 or 1..32 if it is 0, the correct alignment will be calculated by the kernel

returns: 1-ok, 0-failure

MakeArray()
Create an array.




ea nitems - linear address - size of array in items

This function will create an array of the items with the same type as the type of the item at 'ea'. If the byte at 'ea' is undefined, then this function will create an array of bytes.

MakeByte()
Convert the current item to a byte

ea - linear address returns: 1-ok, 0-failure

MakeCode()
Create an instruction at the specified address
ea - linear address

Returns: 0 - can not create an instruction (no such opcode, the instruction
would overlap with existing items, etc) otherwise returns length of the
instruction in bytes

MakeComm()
Set an indented regular comment of an item

ea - linear address comment - comment string

MakeDouble()
Convert the current item to a double floating point (8 bytes)

ea - linear address returns: 1-ok, 0-failure

MakeDword()
Convert the current item to a double word (4 bytes)

ea - linear address returns: 1-ok, 0-failure

MakeFloat()
Convert the current item to a floating point (4 bytes)
ea - linear address

returns: 1-ok, 0-failure

MakeFunction()
Create a function

start,end - function bounds





If the function end address is BADADDR, then IDA will try to determine the function bounds automatically. IDA will define all necessary instructions to determine the function bounds. returns: Note: !=0 - ok an instruction should be present at the start address

MakeName()
Rename a byte


ea - linear address name - new name of address. If name == "", then delete old name returns: 1-ok, 0-failure

MakeOword()
Convert the current item to a octa word (16 bytes)


ea - linear address returns: 1-ok, 0-failure

MakePackReal()
Convert the current item to a packed real (10 or 12 bytes)


ea - linear address returns: 1-ok, 0-failure FIXME: the size needs to be adjusted to IDP.hpp

MakeQword()

Convert the current item to a quadro word (8 bytes)

ea - linear address returns: 1-ok, 0-failure

MakeRptCmt()
Set an indented repeatable comment of an item

ea - linear address comment - comment string

MakeStr()
Create a string.









This function creates a string (the string type is determined by the value of GetLongPrm(INF_STRTYPE)) ea endea

- linear address - ending address of the string (excluded) if endea == BADADDR, then length of string will be calculated by the kernel

returns: 1-ok, 0-failure Note: the type of an existing string is returned by GetStringType()

MakeTbyte()
Convert the current item to a tbyte (10 or 12 bytes)


ea - linear address returns: 1-ok, 0-failure FIXME: the size needs to be adjusted to IDP.hpp

MakeUnkn()
Convert the current item to an explored item



ea - linear address expand - 0: just undefine the current item

1: undefine other instructions if the removal of the


current instruction removes all references to them.


Note: functions will not be undefined even if they have no references to them

MakeVar()
Mark the location as "variable"





Arguments: ea - address to mark

Returns: Note: All that IDA does is to mark the location as "variable". Nothing else, no additional analysis is performed. This function may disappear in the future.

MakeWord()
Convert the current item to a word (2 bytes)

ea - linear address returns: 1-ok, 0-failure

Message()
Display a message in the messages window

msg - message to print (formatting is done in Python) This function can be used to debug IDC scripts

Message()
Display a message in the messages window

msg - message to print (formatting is done in Python) This function can be used to debug IDC scripts

Name()
Get visible name of program byte
This function returns name of byte as it is displayed on the screen.
If a name contains illegal characters, IDA replaces them by the substitution

character during displaying. See IDA.CFG for the definition of the substitution character. ea - linear address

Returns: "" - byte has no name

NameEx()
Get visible name of program byte










This function returns name of byte as it is displayed on the screen. If a name contains illegal characters, IDA replaces them by the substitution character during displaying. See IDA.CFG for the definition of the substitution character. Arguments: fromaddr - the referring address. Allows to retrieve local label addresses in functions. If a local name is not found, then a global name is returned. ea - linear address Returns: "" - byte has no name

NextAddr()
Get next addresss in the program

ea - linear address returns: BADADDR - the specified address in the last used address

NextFunction()
Find next function

ea - any address belonging to the function

returns:

-1 - no more functions otherwise returns the next function start address

NextHead()
Get next defined item (instruction or data) in the program

ea - linear address to start search from maxea - the search will stop at the address

maxea is not included in the search range

returns: BADADDR - no (more) defined items

NextNotTail()
Get next not-tail address in the program
This function searches for the next displayable address in the program.
The tail bytes of instructions and data are not displayable.


ea - linear address returns: BADADDR - no (more) not-tail addresses

NextSeg()
Get next segment


ea - linear address returns: start of the next segment
BADADDR - no next segment

OpAlt()
Specify operand represenation manually.
(for the explanations of 'ea' and 'n' please see OpBinary())




str - a string represenation of the operand Note: IDA will not check the specified operand, it will simply display it instead of the orginal representation of the operand.

OpBinary()
Convert an operand of the item (instruction or data) to a binary number






ea - linear address n


- number of 0 - the 1 - the -1 - all operand first operand second, third and all other operands operands

Returns: 1-ok, 0-failure Note: the data items use only the type of the first operand

OpChr()
See explanation to Opbinary functions.

OpDecimal()
See explanation to Opbinary functions.

OpEnumEx()
Convert operand to a symbolic constant








(for the explanations of 'ea' and 'n' please see OpBinary()) enumid - id of enumeration type serial - serial number of the constant in the enumeration The serial numbers are used if there are more than one symbolic constant with the same value in the enumeration. In this case the first defined constant get the serial number 0, then second 1, etc. There could be 256 symbolic constants with the same value in the enumeration.

OpHex()
See explanation to Opbinary functions.

OpNot()
Toggle the bitwise not operator for the operand
(for the explanations of 'ea' and 'n' please see OpBinary())

OpNumber()
Convert operand to a number (with default number base, radix)
(for the explanations of 'ea' and 'n' please see OpBinary())

OpOctal()
Convert an operand of the item (instruction or data) to an octal number
(see explanation to Opbinary functions)

OpOff()

Convert operand to an offset

Arguments: (for the explanations of 'ea' and 'n' please see OpBinary()) base - base of the offset as a linear address If base == BADADDR then the current operand becomes non-offset Example: seg000:2000 dw 1234h and there is a segment at paragraph 0x1000 and there is a data item within the segment at 0x1234: seg000:1234 MyString db 'Hello, world!',0 Then you need to specify a linear address of the segment base to create a proper offset: OpOffset(["seg000",0x2000],0,0x10000); and you will have: seg000:2000 dw offset MyString Motorola 680x0 processor have a concept of "outer offsets". If you want to create an outer offset, you need to combine number of the operand with the following bit: Please note that the outer offsets are meaningful only for Motorola 680x0.

OpOffEx()
Convert operand to a complex offset expression
This is a more powerful version of OpOff() function.
It allows to explicitly specify the reference type (off8,off16, etc)
and the expression target with a possible target delta.
The complex expressions are represented by IDA in the following form:



target + tdelta - base If the target is not present, then it will be calculated using target = operand_value - tdelta + base The target must be present for LOW.. and HIGH.. reference types

Arguments: ea n reftype target linear address of the instruction/data number of operand to convert (the same as in OpOff) one of REF_... constants an explicitly specified expression target. if you don't want to specify it, use -1. Please note that LOW... and HIGH... reference type requre the target.

base tdelta

- the offset base (a linear address) - a displacement from the target which will be displayed in the expression.

Returns: success (boolean)

OpSeg()
Convert operand to a segment expression
(for the explanations of 'ea' and 'n' please see OpBinary())

OpSign()
Change sign of the operand.
(for the explanations of 'ea' and 'n' please see OpBinary())

OpStkvar()
Convert operand to a stack variable

(for the explanations of 'ea' and 'n' please see OpBinary())

PatchByte()
Change value of a program byte

ea - linear address value - new value of the byte

PatchDword()
Change value of a double word

ea - linear address value - new value of the double word

PatchWord()
Change value of a program word (2 bytes)

ea - linear address value - new value of the word

PrevAddr()

Get previous addresss in the program

ea - linear address returns: BADADDR - the specified address in the first address

PrevFunction()
Find previous function

ea - any address belonging to the function

returns:

-1 - no more functions otherwise returns the previous function start address

PrevHead()
Get previous defined item (instruction or data) in the program




ea - linear address to start search from minea - the search will stop at the address minea is included in the search range returns: BADADDR - no (more) defined items

PrevNotTail()
Get previous not-tail address in the program
This function searches for the previous displayable address in the program.
The tail bytes of instructions and data are not displayable.


ea - linear address returns: BADADDR - no (more) not-tail addresses

RenameEntryPoint()
Rename entry point



ordinal - entry point number name - new name returns: !=0 - ok

Rrst()
Get first xref from 'From'

Rrst0()
Get first xref from 'From'

RrstB()
Get first xref to 'To'

RrstB0()
Get first xref to 'To'

Rnext()
Get next xref from

Rnext0()
Get next xref from

RnextB()
Get next xref to 'To'

RnextB0()
Get next xref to 'To'

RptCmt()
Get repeatable indented comment


Arguments: ea - linear address Returns: string or None if it fails

RunPlugin()
Load and run a plugin

Arguments: name - The plugin name is a short plugin name without an extension

arg

- integer argument

Returns: 0 if could not load the plugin, 1 if ok

ScreenEA()
Get linear address of cursor

SegAddrng()
Change segment addressing




Arguments: ea use32 - any address in the segment - 0: 16bit, 1: 32bit, 2: 64bit

Returns: success (boolean)

SegAlign()
Change alignment of the segment

Arguments:


ea align - any address in the segment - new alignment of the segment

Returns: success (boolean)

SegBounds()
Change segment boundaries





Arguments: ea startea endea disable any address in the segment new start address of the segment new end address of the segment discard bytes that go out of the segment

Returns: boolean success

SegByName()
Get segment by name
segname - name of segment

Returns: segment base address or BADADDR

SegClass()
Change class of the segment



Arguments: ea class - any address in the segment - new class of the segment

Returns: success (boolean)

SegComb()
Change combination of the segment



Arguments: ea comb - any address in the segment - new combination of the segment

Returns: success (boolean)

SegCreate()
Create a new segment













Arguments: startea endea - linear address of the start of the segment - linear address of the end of the segment this address will not belong to the segment 'endea' should be higher than 'startea' - base paragraph or selector of the segment. a paragraph is 16byte memory chunk. If a selector value is specified, the selector should be already defined. - 0: 16bit segment, 1: 32bit segment, 2: 64bit segment - segment alignment. see below for alignment values - segment combination. see below for combination values.

base

use32 align comb

Returns: 0-failed, 1-ok

SegDelete()
Delete a segment




text

Arguments: ea - any address in the segment disable - 1: discard all bytes of the segment from the disassembled


0: retain byte values

Returns: boolean success

SegEnd()
Get end address of a segment


ea - any address in the segment returns: end of segment (an address past end of the segment)
BADADDR - the specified address doesn't belong to any segment

SegName()
Get name of a segment

ea - any address in the segment returns: "" - no segment at the specified address

SegRename()
Change name of the segment



Arguments: ea name - any address in the segment - new name of the segment

Returns: success (boolean)

SegStart()
Get start address of a segment


ea - any address in the segment returns: start of segment
BADADDR - the specified address doesn't belong to any segment

Segments()

Get list of segments (sections) in the binary image

In: Return: List of segment start addresses.

SelEnd()
Get end address of the selected area
returns BADADDR - the user has not selected an area

SelStart()
Get start address of the selected area
returns BADADDR - the user has not selected an area

SetBmaskCmt()
set bitmask comment (only for bitfields)






Arguments: enum_id - id of enum bmask - bitmask of the constant cmt - comment repeatable - type of comment, 0-regular, 1-repeatable Returns: 1-ok, 0-failed

SetBmaskName()
Set bitmask name (only for bitfields)





Arguments: enum_id - id of enum bmask - bitmask of the constant name - name of bitmask Returns: 1-ok, 0-failed

SetFixup()
Set fixup information

ea type

targetsel targetoff displ Returns:

- address to set fixup information about - fixup type. see GetFixupTgtType()

for possible fixup types. - target selector - target offset - displacement none

SetFunctionCmt()
Set function comment



ea - any address belonging to the function cmt - a function comment line repeatable - 1: get repeatable comment

0: get regular comment

SetFunctionEnd()
Change function end address

ea - any address belonging to the function
end - new function end address
returns: !=0 - ok

SetFunctionFlags()
Change function flags


ea - any address belonging to the function flags - see GetFunctionFlags() for explanations returns: !=0 - ok

SetHiddenArea()
Set hidden area state



Arguments: ea - any address belonging to the hidden area visible - new state of the area Returns: !=0 - ok

SetManualInsn()

Specify instruction represenation manually.

ea - linear address insn - a string represenation of the operand IDA will not check the specified instruction, it will simply display it instead of the orginal representation.

SetSegmentType()
Set segment type



Arguments: segea - any address within segment type - new segment type: Returns: !=0 - ok

SetSelector()
Set a selector value






sel - 16bit selector number (should be less than 0xFFFF) val - value of selector returns: note:



nothing ida supports up to 4096 selectors. if 'sel' == 'val' then the selector is destroyed because it has no significance

SetStatus()
Change IDA indicator.


Arguments: status - new status Returns: the previous status.

Warning()
Display a message in a message box

msg - message to print (formatting is done in Python) This function can be used to debug IDC scripts

The user will be able to hide messages if they appear twice in a row on the screen

Word()
Get value of program word (2 bytes)
ea - linear address

returns: the value of the word. If word has no value then returns 0xFFFF

If the current byte size is different from 8 bits, then the returned value

might have more 1's.

add_dref()
Create Data Ref

add_dref()
Create Data Ref

del_dref()
Unmark Data Ref

del_dref()
Unmark Data Ref

refs()
Generic reference collector.

Note: This function is for internal use only.

Resources

[2005a] Carrera, Ero. pyreml. http://dkbza.org/pyreml.html (2005). [2005] Carrera, Ero. idb2reml. http://dkbza.org/idb2reml.html (2005). [2005a] Carrera, Ero. pydot. http://dkbza.org/pydot.html (2005). [2004] Carrera, Ero and Erdlyi, Gergely. Digital Genome Mapping - Advanced Binary Malware Analysis Virus Bulletin Proceedings (2004) 187-197. [2005] Datarescue. IDA. http://www.datarescue.com/idabase/ (2005). [2005] Ellson, John and Gansner, Emden and Koren, Yehuda and Koutsoos, Eleftherios and Mocenigo, John and North, Stephen and Woodhull, Gordon. Graphviz. http://www.graphviz.org/ (2005). [2005] Erdlyi, Gergely. IDAPython. http://d-dome.net/idapython (2005).