FORM REV: R07 (DEC. 11, 2023)FORM NO.

: MNT-1269

DATE PRTD: Page 1 of 15

CUSTOMER 20-Dec-2023
ETOPS SIGNFICANT:
NO

PRIORITY
ETHIOPIAN JOB INSTRUCTION CARD(JIC) HIGH

TAIL NUMBER: CODE: EO(M)-SB965-0976/1690-34-125-11-JIC REV. DATE: JIC REV:

ET-AYP NAME: NAVIGATION - MK V ENHANCED GROUND PROXIMITY WARNING

SYSTEM (EGPWS) - INSTALL LATEST TERRAIN DATABASE AND 13-Sep-2023 8
ENVELOPE MODULATION DATABASE

DESCRIPTION: THIS ENGINEERING ORDER GIVES THE PROCEDURE TO UPDATE THE TERRAIN DATABASE AND
THE ENVELOPE MODULATION DATABASE TO LATEST VERSIONS RELEASED BY HONEYWELL.

JUSTIFICATION
UPDATED VERSIONS OF TERRAIN DATABASE AND ENVELOPE MODULATION DATABASE NEED
TO BE INSTALLED IN ORDER TO UPDATE EGPWS DATA ON AIRPORTS, RUNWAYS, OBSTACLES
AND TERRAIN.
AIRCRAFT INFORMATION:
MODEL: TAIL NO.: MSN: VAR. NO: A/C LINE NO: A/C EFFECTIVITY:

B737-86N ET-AYP 35212 YJ007 2277 CEA 207

PARENT INVENTORY: CONFIG SLOT:

BOEING 737-800 - ET-AYP 34-46 - GROUND PROXIMITY WARNING SYSTEM

WORKPACKAGE INFORMATION SCHEDULING JOB ORGINATOR

ET WORK ORDER: CUSTOMER WORK ORDER: LINE NUMBER: REPEAT INTERVAL:

SB

WO - 62713244 N/A 1 430 CDY

ATA/SUB ATA : 34-46 WORK TYPE: AVIONICS(Avionics systems work types),HANGAR(A-CHECK),LINE(Aircraft

Ramp Maintenance )
BLOCK: N/A
DOCUMENT REFERENCE: HONEYWELL SB 965-0976/1690-34-125 Rev 4, Dated 05-Feb-18; B737-NG AMM 34-46-
00

TASK INSTRUCTION: - INSTALL THE LATEST TDB VERSION INTO THE GPWS.
- DO A SOFTWARE CONFIGURATION CHECK TO MAKE SURE THE TERRAIN DATABASE
AND ENVELOPE MODULATION DATABASE ARE CORRECT.
- IDENTIFY THE UPGRADED TERRAIN DATABASE ON THE EGPWS INSTRUCTION LABEL.
CRITICAL/RII: NO (If yes perform independent inspection and sign off on the last page)
CDCCL/ALI: NO (If yes perform independent inspection and sign off on the last page)

SKILL REQUIREMENT
ITEM SKILL
1 AMT (AC Maint Technician)

NOTE: BEWARE OF HUMAN INDUCED ERRORS. REPORT AND DISCUSS ANY UNCERTAINTIES REGARDING
EXECUTION OF THIS TASK
 FORM REV: R07 (DEC. 11, 2023)FORM NO.: MNT-1269

DATE PRTD: Page 2 of 15

CUSTOMER 20-Dec-2023
ETOPS SIGNFICANT:
NO

PRIORITY
ETHIOPIAN JOB INSTRUCTION CARD(JIC) HIGH

TAIL NUMBER: CODE: EO(M)-SB965-0976/1690-34-125-11-JIC REV. DATE: JIC REV:

ET-AYP NAME: NAVIGATION - MK V ENHANCED GROUND PROXIMITY WARNING

SYSTEM (EGPWS) - INSTALL LATEST TERRAIN DATABASE AND 13-Sep-2023 8
ENVELOPE MODULATION DATABASE

2 INSP-AC (Aircraft Inspector)

3 CAT-B2 (Category B2 line certifying/support staff)
Prepared by: Maleda Zenabu Approved by: Endawoke Senay Section: A/C SYSTEMS ENG'G

To Report any Task Card Discrepancy Click here

ZONES PANELS

117 - ELECTRICAL AND ELECTRONICS COMPARTMENT

118 - ELECTRICAL AND ELECTRONICS COMPARTMENT

TOOL REQUIREMENT
TOOL DESCRIPTION: PART NO:

Special tool not required *******

PART REQUIREMENT
CONSUMABLE / EXPENDABLE
INSTALL REQUEST
DESCRIPTION QTY UOM PART NO. BATCH/SERIAL NO. ID PRIORITY STATUS PN. PROV.

Terrain 1.0 ******* 58960-996- ******* null null null *******

Database XXX 0109-635
with envelope
Modulation
Database BXX
LINEAR FLASH 1.0 EA 97896-300- ******* null null null *******
PCMCIA 1079-021
MEMORY X2895-LFC-
CARD, 64 MB 64MB-20C-
9302
X2895-PCM-
LFSA-
CUG10548F

ROTABLE
REMOVAL INSTALL REQUEST
DESCRIPTION POS PART NO. SN NO. CONDITION PART NO. BATCH/ SN ID PRIORIT STATUS PN.
Y PROV.
/REASON NO.

NOTE: BEWARE OF HUMAN INDUCED ERRORS. REPORT AND DISCUSS ANY UNCERTAINTIES REGARDING
EXECUTION OF THIS TASK
 FORM REV: R07 (DEC. 11, 2023)FORM NO.: MNT-1269

DATE PRTD: Page 3 of 15

CUSTOMER 20-Dec-2023
ETOPS SIGNFICANT:
NO

PRIORITY
ETHIOPIAN JOB INSTRUCTION CARD(JIC) HIGH

TAIL NUMBER: CODE: EO(M)-SB965-0976/1690-34-125-11-JIC REV. DATE: JIC REV:

ET-AYP NAME: NAVIGATION - MK V ENHANCED GROUND PROXIMITY WARNING

SYSTEM (EGPWS) - INSTALL LATEST TERRAIN DATABASE AND 13-Sep-2023 8
ENVELOPE MODULATION DATABASE

******** ******** ******** ******** ******** ******** ******** ******** ******** ******** ********

NOTE: BEWARE OF HUMAN INDUCED ERRORS. REPORT AND DISCUSS ANY UNCERTAINTIES REGARDING
EXECUTION OF THIS TASK
 FORM REV: R07 (DEC. 11, 2023)FORM NO.: MNT-1269

DATE PRTD: Page 4 of 15

CUSTOMER 20-Dec-2023
ETOPS SIGNFICANT:
NO

PRIORITY
ETHIOPIAN JOB INSTRUCTION CARD(JIC) HIGH

TAIL NUMBER: CODE: EO(M)-SB965-0976/1690-34-125-11-JIC REV. DATE: JIC REV:

ET-AYP NAME: NAVIGATION - MK V ENHANCED GROUND PROXIMITY WARNING

SYSTEM (EGPWS) - INSTALL LATEST TERRAIN DATABASE AND 13-Sep-2023 8
ENVELOPE MODULATION DATABASE

WARNING:
MAKE SURE THAT YOU OBEY ALL THE WARNINGS ,CAUTIONS AND NOTES GIVEN IN THE REFERENCED
DOCUMENT PROCEDURES AND IN THIS JIC STEPS.
NOTE:
1. IDENTICAL MAINTENANCE TASKS/MAINTENANCE ACTION TO MULTIPLE SIMILAR ELEMENTS/SYSTEMS SHALL ALWAYS
BE ACCOMPLISHED BY DIFFERENT QUALIFIED PERSONNEL DURING THE SAME MAINTENANCE EVENT.

2. WHILE ACCOMPLISHING THIS MAINTENANCE TASK MAKE SURE TO PERFORM ALL STEPS USING A PROPER TOOLS
INDICATED ON THE WORKING REFERENCE DOCUMENT AND RECORD THE TOOLS USED ON THE TOOLS USAGE
CONFIRMATION FIELD OF THIS JOB CARD.
3. MAKE SURE THAT ALL YOUR MEASURMENT UNIT OF THE RECORDED VALUES ARE IN LINE WITH THE UNIT OF
MEASURMENT DEFINED IN MAINTENIX SYSTEM.

EXECUTION STEPS:
ORDER DESCRIPTION SIGNED BY
MECH/TECH INSP

1 AMT: XXXXXXXXXXX
XXXXXXXXXXX
GENERAL DATA XXXXXXXXXXX
XXXXXXXXXXX
XXXXXXXXXXX
WARNING:
XXXXXXXXXXX
========
XXXXXXXXXXX
TO PREVENT INJURY TO PERSONNEL, KNOW THAT VOLTAGES ARE IN THE EGPWS XXXXXXXXXXX
AND IN THE TEST EQUIPMENT. VOLTAGES AS LOW AS 28 VOLTS CAN CAUSE BAD XXXXXXXXXXX
INJURY IN SOME CONDITIONS. THE INDICATION OF LOW VOLTAGE SHOULD NOT BE XXXXXXXXXXX
IDENTIFIED AS A SAFE CONDITION. XXXXXXXXXXX
XXXXXXXXXXX
CAUTION: XXXXXXXXXXX
XXXXXXXXXXX
========
XXXXXXXXXXX
THE ENHANCED GROUND PROXIMITY WARNING SYSTEM CONTAINS ELECTROSTATIC
XXXXXXXXXXX
DISCHARGE SENSITIVE ITEMS. USE APPROVED PRECAUTIONS. XXXXXXXXXXX

KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF METAL
PARTICLES OR CONTAMINATION WHEN YOU USE TOOLS. UNWANTED MATERIAL,
METAL PARTICLES OR CONTAMINATION CAUGHT IN WIRE BUNDLES CAN CAUSE
DAMAGE TO THE BUNDLES. DAMAGED WIRE BUNDLES CAN CAUSE SPARKS OR
OTHER ELECTRICAL DAMAGE.

NOTES:
=======
- OBEY ALL OF THE WARNINGS AND CAUTIONS GIVEN IN THE SPECIFIED MANUAL
SECTIONS.

NOTE: BEWARE OF HUMAN INDUCED ERRORS. REPORT AND DISCUSS ANY UNCERTAINTIES REGARDING
EXECUTION OF THIS TASK
 FORM REV: R07 (DEC. 11, 2023)FORM NO.: MNT-1269

DATE PRTD: Page 5 of 15

CUSTOMER 20-Dec-2023
ETOPS SIGNFICANT:
NO

PRIORITY
ETHIOPIAN JOB INSTRUCTION CARD(JIC) HIGH

TAIL NUMBER: CODE: EO(M)-SB965-0976/1690-34-125-11-JIC REV. DATE: JIC REV:

ET-AYP NAME: NAVIGATION - MK V ENHANCED GROUND PROXIMITY WARNING

SYSTEM (EGPWS) - INSTALL LATEST TERRAIN DATABASE AND 13-Sep-2023 8
ENVELOPE MODULATION DATABASE

- THIS IS A SOFTWARE CHANGE ONLY. THE EGPWS IS NOT DISASSEMBLED AND THE
INSPECTION SEALS ARE NOT BROKEN.

2 AMT: XXXXXXXXXXX
XXXXXXXXXXX
1) Obtain a PCMCIA card containing latest version of terrain database (TDB) from tool room. XXXXXXXXXXX
On the spaces provided below and/or on Maintenix 'Work Performed' section, record the terrain XXXXXXXXXXX
XXXXXXXXXXX
database part number and the database version indicated on the PCMCIA card.
XXXXXXXXXXX
XXXXXXXXXXX
NOTE: XXXXXXXXXXX
====== XXXXXXXXXXX
THE TERRAIN DB VERSION IS THE LAST THREE DIGITS INDICATED ON THE TERRAIN XXXXXXXXXXX
DB PART NUMBER. FOR EXAMPLE, FOR TERRAIN DB PART NUMBER INDICATED AS XXXXXXXXXXX
996-0109-635, THE TERRAIN DATABASE VERSION IS 635. XXXXXXXXXXX
XXXXXXXXXXX
XXXXXXXXXXX
TERRAIN DB PART No.: ____________________
XXXXXXXXXXX
XXXXXXXXXXX
TERRAIN DB VERSION: ____________________ XXXXXXXXXXX
XXXXXXXXXXX
2) Together with the PCMCIA card, obtain a placard (label) that indicates the current applicable XX
terrain database version. Record the version number indicated on the label in the space
provided below and/or on Maintenix 'Work Performed' section.

TDB VERSION INDICATED ON LABEL: _________

NOTE:
=====
MAKE SURE THE TDB VERSION INDICATED ON THE PCMCIA CARD AND ON THE LABEL
ARE IDENTICAL.

3 AMT: XXXXXXXXXXX
XXXXXXXXXXX
EXISTING EGPWS COMPUTER VERIFICATION XXXXXXXXXXX
XXXXXXXXXXX
XXXXXXXXXXX
Check the following before proceeding to the next steps:
XXXXXXXXXXX
XXXXXXXXXXX
Record the EGPWS status in the spaces provided below and/or on Maintenix 'Work Performed' XXXXXXXXXXX
section. Refer to Figure 2 as an example to locate the required information. XXXXXXXXXXX

NOTE: BEWARE OF HUMAN INDUCED ERRORS. REPORT AND DISCUSS ANY UNCERTAINTIES REGARDING
EXECUTION OF THIS TASK
 FORM REV: R07 (DEC. 11, 2023)FORM NO.: MNT-1269

DATE PRTD: Page 6 of 15

CUSTOMER 20-Dec-2023
ETOPS SIGNFICANT:
NO

PRIORITY
ETHIOPIAN JOB INSTRUCTION CARD(JIC) HIGH

TAIL NUMBER: CODE: EO(M)-SB965-0976/1690-34-125-11-JIC REV. DATE: JIC REV:

ET-AYP NAME: NAVIGATION - MK V ENHANCED GROUND PROXIMITY WARNING

SYSTEM (EGPWS) - INSTALL LATEST TERRAIN DATABASE AND 13-Sep-2023 8
ENVELOPE MODULATION DATABASE

ORDER DESCRIPTION SIGNED BY

MECH/TECH INSP

XXXXXXXXXXX
XXXXXXXXXXX
a. EGPWS PART NUMBER: ____________________________________ XXXXXXXXXXX
XXXXXXXXXXX
XXXXXXXXXXX
b. EGPWS SERIAL NUMBER: ___________________________________
XXXXXXXXXXX
XXXXXXXXXXX
c. EGPWS HARDWARE MODIFICATION STATUS: __________________ XXXXX

d. EGPWS APPLICATION (APP) SOFTWARE MODIFICATION STATUS: ___________

e. EGPWS CONFIGURATION (CFG) SOFTWARE MODIFICATION STATUS: _________

NOTES:
=====

- IF THE CFG SW MOD LEVEL IS NOT INDICATED ON THE UNIT, RECORD AS '0' OR '-' .

- FOR EGPWS PNs THAT START WITH 965-1690, RECORD THE INDICATED SOFTWARE
MOD STATUS ON THE SPACE RESERVED FOR APP SOFTWARE MODIFICATION
STATUS. REFER TO SHEET 2 OF FIGURE 2.

4 AMT/INSP-AC:

EGPWS HARDWARE MODIFICATION STATUS CHECK

A) Make sure that the EGPWS PN is among those listed in the attached Table 1. If the EGPWS
P/N is not listed in the attached Table 1, report to engineering and do not proceed to the
following steps.

B) If the EGPWS PN starts with 965-0976-003, make sure that the hardware modification
status is mod 4 or above. If the EGPWS P/N is 965-0976-003 and its hardware mod status is
below mod 4, do not proceed to this modification and report to engineering.

C) If the EGPWS PN starts with 965-0976-040, make sure that the hardware modification
status is mod 2 or above. If the EGPWS P/N is 965-0976-040 and its hardware mod status is
below mod 2, do not proceed to this modification and report to engineering.

NOTE: BEWARE OF HUMAN INDUCED ERRORS. REPORT AND DISCUSS ANY UNCERTAINTIES REGARDING
EXECUTION OF THIS TASK
 FORM REV: R07 (DEC. 11, 2023)FORM NO.: MNT-1269

DATE PRTD: Page 7 of 15

CUSTOMER 20-Dec-2023
ETOPS SIGNFICANT:
NO

PRIORITY
ETHIOPIAN JOB INSTRUCTION CARD(JIC) HIGH

TAIL NUMBER: CODE: EO(M)-SB965-0976/1690-34-125-11-JIC REV. DATE: JIC REV:

ET-AYP NAME: NAVIGATION - MK V ENHANCED GROUND PROXIMITY WARNING

SYSTEM (EGPWS) - INSTALL LATEST TERRAIN DATABASE AND 13-Sep-2023 8
ENVELOPE MODULATION DATABASE

ORDER DESCRIPTION SIGNED BY

MECH/TECH INSP

5 AMT/INSP-AC:

EGPWS SOFTWARE MODIFICATION STATUS CHECK

For the EGPWS PNS listed in Table 2 attached, the software mod status should be as shown
or higher. If the software mod level is below that shown in the Table, report to engineering and
do not proceed to this modification.

NOTE:
=====
FOR EGPWS PNs THAT ARELISTED UNDER TABLE 1 BUT NOT LISTED IN THE
ATTACHED TABLE 2, YOU CAN PROCEED TO THE FOLLOWING STEPS REGARDLESS
OF THE SOFTWARE MOD LEVELS.

6 AMT: XXXXXXXXXXX
XXXXXXXXXXX
UPGRADE OF TERRAIN DB AND ENVELOPE MODULATION DB XXXXXXXXXXX
XXXXXXXXXXX
XXXXXXXXXXX
NOTES:
XXXXXXXXXXX
=====
XXXXXXXXXXX
- NO SPECIAL EQUIPMENT IS NECESSARY TO DO THIS PROCEDURE. XXXXXXXXXXX
XXXXXXXXXXX
- A PCMCIA CARD WITH THE APPLICABLE TERRAIN DATABASE AND ENVELOPE XXXXXXXXXXX
MODULATION DATABASE INSTALLED IS NECESSARY TO DO THIS MODIFICATION. XXXXXXXXXXX
XXXXXXXXXXX
- THIS IS A SOFTWARE CHANGE ONLY. THE EGPWS IS NOT DISASSEMBLED AND THE XXXXXXXXXXX
XXXXXXXXXXX
INSPECTION SEALS ARE NOT BROKEN.
XXXXXXXXXXX
XXXXXXXXXXX
XXXXXXXXXXX
Do the following steps to install Terrain DB and Envelope DB XXXXXXXXXXX
X
(A) Make sure the power to the EGPWS is on. Make sure the COMPUTER OK LED on the
EGPWS front panel is on.

(B) Open the door on the EGPWS front panel.

(C) Put the PCMCIA card into the PCMCIA card slot.

NOTE:
=====
NOTE: BEWARE OF HUMAN INDUCED ERRORS. REPORT AND DISCUSS ANY UNCERTAINTIES REGARDING
EXECUTION OF THIS TASK
 FORM REV: R07 (DEC. 11, 2023)FORM NO.: MNT-1269

DATE PRTD: Page 8 of 15

CUSTOMER 20-Dec-2023
ETOPS SIGNFICANT:
NO

PRIORITY
ETHIOPIAN JOB INSTRUCTION CARD(JIC) HIGH

TAIL NUMBER: CODE: EO(M)-SB965-0976/1690-34-125-11-JIC REV. DATE: JIC REV:

ET-AYP NAME: NAVIGATION - MK V ENHANCED GROUND PROXIMITY WARNING

SYSTEM (EGPWS) - INSTALL LATEST TERRAIN DATABASE AND 13-Sep-2023 8
ENVELOPE MODULATION DATABASE

ORDER DESCRIPTION SIGNED BY

MECH/TECH INSP

THE EGPWS AUTOMATICALLY APPLIES AND REMOVES POWER FROM THE PCMCIA
CARD.

(D) While the databases are installed, make sure that the IN PROG led comes on and the
COMPUTER OK LED goes off.

(E) After the databases are installed, make sure the XFER COMP LED comes on.

(F) Remove the PCMCIA card from the EGPWS.

7 AMT: XXXXXXXXXXX
XXXXXXXXXXX
(A) After approximately 15 seconds, make sure that the computer OK led comes on. This XXXXXXXXXXX
identifies that the databases were installed correctly. XXXXXXX

(B) Close the door on the EGPWS front panel.

8 AMT: XXXXXXXXXXX
XXXXXXXXXXX
TERRAIN DATABASE AND THE ENVELOPE MODULATION DATABASE VERSIONS CHECK XXXXXXXXXXX
XXXXXXXXXXX
XXXXXXXXXXX
NOTES:
XXXXXXXXXXX
======
XXXXXXXXXXX
- THE TERRAIN DATABASE AND THE ENVELOPE DATABASE VERSIONS CHECK IS TO XXXXXXXXXXX
BE DONE THROUGH EGPWS ST FUNCTION. XXXXXXXXXXX
XXXXXXXXXXX
- THE ST FUNCTION CANNOT BE STARTED IF THE EGPWS DOES NOT IDENTIFY THAT XXXXXXXXXXX
THE AIRCRAFT IS ON THE GROUND. XXXXXXXXXXX
XXXXXXXXXXX
XXXXXXXXXXX
- THE ST FUNCTION MAY BE STARTED FROM THE TWO POSSIBLE LOCATIONS
XXXXXXXXXXX
IDENTIFIED BELOW:
XXXXXXXXXXX
XXXXXXXXXXX
A. THE AIRCRAFT COCKPIT WITH THE GPWS TEST SWITCH. XXXXXXXXXXX
--- USE OF THE COCKPIT ST FUNCTION CAN BE DIFFERENT FROM ONE AIRCRAFT TO XXXXXXXXXXX
ANOTHER. FOR EXAMPLE, THE ST FUNCTION CAN BE STARTED WHEN THE GPWS XXXXXXXXXXX
PULL-UP INDICATOR IS PUSHED OR WHEN A SEPARATE ST SWITCH IS PUSHED. XXXXXXXXXXX
XXXXXXXXXXX

NOTE: BEWARE OF HUMAN INDUCED ERRORS. REPORT AND DISCUSS ANY UNCERTAINTIES REGARDING
EXECUTION OF THIS TASK
 FORM REV: R07 (DEC. 11, 2023)FORM NO.: MNT-1269

DATE PRTD: Page 9 of 15

CUSTOMER 20-Dec-2023
ETOPS SIGNFICANT:
NO

PRIORITY
ETHIOPIAN JOB INSTRUCTION CARD(JIC) HIGH

TAIL NUMBER: CODE: EO(M)-SB965-0976/1690-34-125-11-JIC REV. DATE: JIC REV:

ET-AYP NAME: NAVIGATION - MK V ENHANCED GROUND PROXIMITY WARNING

SYSTEM (EGPWS) - INSTALL LATEST TERRAIN DATABASE AND 13-Sep-2023 8
ENVELOPE MODULATION DATABASE

ORDER DESCRIPTION SIGNED BY

MECH/TECH INSP

B. THE ST BUTTON BEHIND THE FRONT PANEL DOOR OF THE EGPWS. XXXXXXXXXXX
--- YOU WILL NEED TO USE A HEADPHONE TO PERFORM THE CHECK FROM THIS XXXXXXXXXXX
LOCATION. XXXXXXXXXXX
XXXXXXXXXXX
XXXXXXXXXXX
THE EGPWS ST FUNCTION HAS SIX LEVELS THAT IDENTIFY THE DATA GIVEN BELOW:
XXXXXXXXXXX
-- CONDITION AND CONFIGURATION OF THE EGPWS
XXXXXXXXXXX
-- FAULT AND WARNING HISTORY XXXXXXXXXXX
-- CONDITION OF THE DIFFERENT INPUTS. XXXXXXXXXXX
XXXXXXX
TO HELP GO THROUGH THE DIFFERENT LEVELS, THERE ARE TWO CANCEL
FUNCTIONS:
- SHORT CANCEL (PUSH AND HOLD THE ST BUTTON FOR MORE THAN 0.5 SECOND
BUT LESS THAN TWO SECONDS)

- LONG CANCEL (PUSH AND HOLD THE ST BUTTON MORE THAN TWO SECONDS BUT
LESS THAN EIGHT SECONDS).

THE SHORT CANCEL AND LONG CANCEL FUNCTIONS OPERATE DIFFERENTLY WHEN
THE ST IS IN DIFFERENT LEVELS. TO START THE ST SEQUENCE, OR TO CONTINUE
FROM ONE LEVEL TO ANOTHER, USE THE SHORT CANCEL. WHEN THE INSTRUCTION
"PUSH THE ST BUTTON" IS GIVEN BELOW, USE THE SHORT CANCEL SEQUENCE.

THE PROCEDURE GIVEN BELOW MOVES THE OPERATOR DIRECTLY TO THE LEVEL 3
ST (SYSTEM CONFIGURATION). MOST OF THE LEVEL 1 AND LEVEL 2 ST ARE NOT
DONE.

9 AMT: XXXXXXXXXXX
XXXXXXXXXXX
(A) Push the ST button to start the Level 1 ST. XXXXXXXXXXX
XXXXXXXXXXX
XXXXXXXXXXX
NOTE:
XXXXXXXXXXX
=====
XXXXXXXXXXX
IF A PROGRAM PIN PARITY ERROR IS IDENTIFIED, THE ST WILL NOT WORK UNTIL THE XXXXXXXXXXX
AIRCRAFT CONFIGURATION IS CORRECT. XXXXXXXXXXX
XXXXXXXXXXX
(B) After the Level 1 ST message starts, push the ST button. This cancels the Level 1 ST and XXXX
starts the Level 2 ST.

(C) After the Level 2 ST message starts (CURRENT FAULTS...), push and hold the ST button
for five seconds. This cancels the Level 2 ST.
NOTE: BEWARE OF HUMAN INDUCED ERRORS. REPORT AND DISCUSS ANY UNCERTAINTIES REGARDING
EXECUTION OF THIS TASK
 FORM REV: R07 (DEC. 11, 2023)FORM NO.: MNT-1269

DATE PRTD: Page of 15

CUSTOMER 20-Dec-2023 10

ETOPS SIGNFICANT:
NO

PRIORITY
ETHIOPIAN JOB INSTRUCTION CARD(JIC) HIGH

TAIL NUMBER: CODE: EO(M)-SB965-0976/1690-34-125-11-JIC REV. DATE: JIC REV:

ET-AYP NAME: NAVIGATION - MK V ENHANCED GROUND PROXIMITY WARNING

SYSTEM (EGPWS) - INSTALL LATEST TERRAIN DATABASE AND 13-Sep-2023 8
ENVELOPE MODULATION DATABASE

ORDER DESCRIPTION SIGNED BY

MECH/TECH INSP

(D) When the message PRESS TO CONTINUE is heard, push the ST button. This starts the
Level 3 ST (system configuration).

10 AMT/INSP-AC:

(A) Listen for the applicable messages as they are announced. Record the Terrain Database
Version and Envelope Modulation Database version in the spaces provided below and/or on
Maintenix 'Work Performed' section.

"TERRAIN DB VERSION": ___________

"ENVELOPE MODULATION DB VERSION": __________

(B) When the Level 3 ST is complete, the message PRESS TO CONTINUE comes on. If the
ST button is not pressed, the ST sequence stops.

11 AMT/INSP-AC:

Make sure the terrain database version recorded from the aircraft on Step 10 above matches
the one indicated on the PCMCIA card. If it does not match, return to step 6 to re-attempt the
terrain database load.

12 AMT/INSP-AC:

Install the terrain database label (placard) that shows the TDB version in the approximate
location shown in Figure 1 to show that this modification has been done.

NOTE:
=====
- AS APPLICABLE, REMOVE / MARK OUT OR COVER OLD INDICATIONS OF PREVIOUS
DATABASE VERSIONS FOUND ON THE EGPWS DOOR TDB VERSION LABEL AREA

- IF A PLACARD IS NOT PROVIDED, YOU CAN USE PERMANENT BLACK MARKING

NOTE: BEWARE OF HUMAN INDUCED ERRORS. REPORT AND DISCUSS ANY UNCERTAINTIES REGARDING
EXECUTION OF THIS TASK
 FORM REV: R07 (DEC. 11, 2023)FORM NO.: MNT-1269

DATE PRTD: Page of 15

CUSTOMER 20-Dec-2023 11

ETOPS SIGNFICANT:
NO

PRIORITY
ETHIOPIAN JOB INSTRUCTION CARD(JIC) HIGH

TAIL NUMBER: CODE: EO(M)-SB965-0976/1690-34-125-11-JIC REV. DATE: JIC REV:

ET-AYP NAME: NAVIGATION - MK V ENHANCED GROUND PROXIMITY WARNING

SYSTEM (EGPWS) - INSTALL LATEST TERRAIN DATABASE AND 13-Sep-2023 8
ENVELOPE MODULATION DATABASE

ORDER DESCRIPTION SIGNED BY

MECH/TECH INSP

MATERIAL TO PUT THE APPLICABLE TERRAIN DATABASE NUMBER ON THE LABEL

13 AMT: XXXXXXXXXXX
XXXXXXXXXXX
Return PCMCIA card to tool room. XXXXXXXXXXX
XXXXXXXX
NOTE:
=====
THERE IS A LIMITED NUMBER OF TERRAIN DB PCMCIA CARDS AVAILABLE FOR ALL
A/Cs, SO MAKE SURE TO RETURN THE CARD AS SOON AS THE TASK IS COMPLETED.

14 AMT/INSP-AC:

Make sure that the aircraft is clear of all tools, equipment and any other extraneous parts and
materials, and return all tools and equipment to their respective storage.

15 AMT/INSP-AC:

Return the aircraft back to serviceable condition.

NOTE: BEWARE OF HUMAN INDUCED ERRORS. REPORT AND DISCUSS ANY UNCERTAINTIES REGARDING
EXECUTION OF THIS TASK
 FORM REV: R07 (DEC. 11, 2023)FORM NO.: MNT-1269

DATE PRTD: Page of 15

CUSTOMER 20-Dec-2023 12

ETOPS SIGNFICANT:
NO

PRIORITY
ETHIOPIAN JOB INSTRUCTION CARD(JIC) HIGH

TAIL NUMBER: CODE: EO(M)-SB965-0976/1690-34-125-11-JIC REV. DATE: JIC REV:

ET-AYP NAME: NAVIGATION - MK V ENHANCED GROUND PROXIMITY WARNING

SYSTEM (EGPWS) - INSTALL LATEST TERRAIN DATABASE AND 13-Sep-2023 8
ENVELOPE MODULATION DATABASE

MAKE SURE ALL TORQUE REQUIRED PARTS/COMPONENTS ARE TIGHTEN PROPERLY WITH THE ACCEPTABLE
NOTE: RANGE OF VALUES PER THE APPLICABLE MAINTENANCE DATA AND THE ACTUAL VALUES ARE RECORDED ON
THE GIVEN SPACE ON THE TASK CARD OR THE FIELD GIVEN FOR TECHNICIAN’S STATUS SUMMARY. (ONLY IF
THERE IS/ARE PARTS/COMPONENTS TO BE TORQUED)

FAULT FOUND?(YES/NO) IF YES WRITE NRC/FAULT BARCODE REFERENCE:

MEASUREMENTS:
PARAMETER VALUE

EGPWS PART NUMBER (EGPWS COMPUTER

PART NUMBER)
EGPWS SERIAL NUMBER (EGPWS COMPUTER
SERIAL NUMBER)
EGPWS HARDWARE MOD LEVEL (ENTER
EGPWS HARDWARE MODIFICATION STATUS
(MOD LEVEL))
EGPWS APP SW MOD LEVEL (EGPWS
APPLICATION (APPL) SOFTWARE
MODIFICATION STATUS)
EGPWS CFG SW MOD LEVEL (EGPWS
CONFIGURATION (CFG) SOFTWARE
MODIFICATION STATUS)
TERRAIN DB NEW (ENTER THE VERSION OF
THE NEWELY INSTALLED TERRAIN DB)
EM DB NEW (ENTER THE VERSION OF THE
NEWLY INSTALLED ENVELOPE MODULATION
DB)
SKILL INSPECTION RESULT/ACTION SUMMARY ID MAN HR. DATE

NOTE: BEWARE OF HUMAN INDUCED ERRORS. REPORT AND DISCUSS ANY UNCERTAINTIES REGARDING
EXECUTION OF THIS TASK
 FORM REV: R07 (DEC. 11, 2023)FORM NO.: MNT-1269

DATE PRTD: Page of 15

CUSTOMER 20-Dec-2023 13

ETOPS SIGNFICANT:
NO

PRIORITY
ETHIOPIAN JOB INSTRUCTION CARD(JIC) HIGH

TAIL NUMBER: CODE: EO(M)-SB965-0976/1690-34-125-11-JIC REV. DATE: JIC REV:

ET-AYP NAME: NAVIGATION - MK V ENHANCED GROUND PROXIMITY WARNING

SYSTEM (EGPWS) - INSTALL LATEST TERRAIN DATABASE AND 13-Sep-2023 8
ENVELOPE MODULATION DATABASE

AMT

INSP-AC

TOOLS USED
DESCRIPTION: PART NO: SERIAL/TAG NO. Calibr. Due Date

Special tool not required ******* ******* *******

PARTS USED (ALL CATEGORY)

DESCRIPTION: MFG PART NUMBER SERIAL/BATCH NO. QTY

LINEAR FLASH PCMCIA MEMORY CARD, PCM-LFSA-CUG10548F 1.0

64 MB

Terrain Database XXX with envelope 1.0

Modulation Database BXX

NOTE: BEWARE OF HUMAN INDUCED ERRORS. REPORT AND DISCUSS ANY UNCERTAINTIES REGARDING
EXECUTION OF THIS TASK
 FORM REV: R07 (DEC. 11, 2023)FORM NO.: MNT-1269

DATE PRTD: Page of 15

CUSTOMER 20-Dec-2023 14

ETOPS SIGNFICANT:
NO

PRIORITY
ETHIOPIAN JOB INSTRUCTION CARD(JIC) HIGH

TAIL NUMBER: CODE: EO(M)-SB965-0976/1690-34-125-11-JIC REV. DATE: JIC REV:

ET-AYP NAME: NAVIGATION - MK V ENHANCED GROUND PROXIMITY WARNING

SYSTEM (EGPWS) - INSTALL LATEST TERRAIN DATABASE AND 13-Sep-2023 8
ENVELOPE MODULATION DATABASE

NOTE: Attach serviceable part tag/applicable documents to this task card if any part/s used for task execution.

NOTE: BEWARE OF HUMAN INDUCED ERRORS. REPORT AND DISCUSS ANY UNCERTAINTIES REGARDING
EXECUTION OF THIS TASK
 FORM REV: R07 (DEC. 11, 2023)FORM NO.: MNT-1269

DATE PRTD: Page of 15

CUSTOMER 20-Dec-2023 15

ETOPS SIGNFICANT:
NO

PRIORITY
ETHIOPIAN JOB INSTRUCTION CARD(JIC) HIGH

TAIL NUMBER: CODE: EO(M)-SB965-0976/1690-34-125-11-JIC REV. DATE: JIC REV:

ET-AYP NAME: NAVIGATION - MK V ENHANCED GROUND PROXIMITY WARNING

SYSTEM (EGPWS) - INSTALL LATEST TERRAIN DATABASE AND 13-Sep-2023 8
ENVELOPE MODULATION DATABASE

MAKE SURE THE AIRCRAFT, ENGINE OR COMPONENT IS CLEAR OFF ALL ID INSP-SIGN
TOOLS, EQUIPMENT AND ANY OTHER EXTRANEOUS PARTS OR MATERIAL,
AND THAT ALL ACCESS PANELS REMOVED HAVE BEEN REFITTED

USED REFERENCE DOCUMENT (Applicable Only When The Reference is not going to be attached with This Job
card as a record Document )

MAIN REFERENCE DOCUMENT NAME REV. DATE REV. NO.

HONEYWELL SB 965-0976/1690-34-125 Rev 4, Dated 05-Feb-18; B737-NG AMM 34-46-00

INDEPENDENT INSPECTION PERFORMED BY:

TASK RELEASE (By CAT-B1/CAT-B2/CAT-C):

ID NO. Name: STAMP SIGN. DATE.

NOTE: BEWARE OF HUMAN INDUCED ERRORS. REPORT AND DISCUSS ANY UNCERTAINTIES REGARDING
EXECUTION OF THIS TASK

NOTE: BEWARE OF HUMAN INDUCED ERRORS. REPORT AND DISCUSS ANY UNCERTAINTIES REGARDING
EXECUTION OF THIS TASK
 FORM MNT-1254 R01

JIC SUPPLEMENT JIC CODE PAGE

EO(M)-SB965-0976/1690-34-125-11-JIC REV 05 1 OF 5

TABLE 1

Applicable EGPWS MK V Part Numbers

965-0976-003 965-0976-020 965-0976-040 965-0976-060 965-1690

-202-202 -208-208 -202-202 -214-214 -050
-203-203 -210-210 -204-204 -216-216 -051
-204-204 -212-212 -206-206 -217-217 -052
-206-206 -213-213 -208-208 -218-218 -054
-206-207 -214-214 -210-210 -219-219 -055
-207-207 -216-216 -212-212 -220-220 -056
-208-208 -217-217 -213-213 -222-222 -057
-210-210 -218-218 -214-214 -224-224 -070
-211-211 -219-219 -216-216 -226-226 -071
-212-212 -220-220 -217-217 -228-228
-213-213 -222-222 -218-218 -230-230
-214-214 -224-224 -219-219 -232-232
-216-216 -226-226 -220-220 -233-233
-217-217 -228-228 -222-222 -234-234
-218-218 -230-230 -224-224 -236-236
-219-219 -232-232 -226-226 -238-238
-220-220 -233-233 -228-228 -239-239
-222-222 -234-234 -230-230 -240-240
-224-224 -236-236 -232-232
-226-226 -238-238 -233-233
-228-228 -239-239 -234-234
-230-230 -240-240 -236-236
-232-232 -239-239
-233-233 -240-240
-234-234
-236-236
-238-238
-239-239
-240-240

NOTE:
THE INSTRUCTIONS IN THIS EO ARE APPLICABLE TO THE EGPWS WITH THE PART
NUMBERS IDENTIFIED IN THE TABLE ABOVE.

TABLE 1: Applicable EGPWS MK V Part Numbers

 FORM MNT-1254 R01
JIC SUPPLEMENT JIC CODE PAGE

EO(M)-SB965-0976/1690-34-125-11-JIC REV 04 2 OF 5

TABLE 2

Software Modification Concurrent Requirements

PN Software MOD Level

965-0976-0XX-206-206 -206 MOD 3 -206 MOD 2
965-0976-0XX-206-207 -206 MOD 3 -207 MOD 1
965-0976-0XX-208-208 -208 MOD 3 -208 MOD 1
965-0976-0XX-210-210 -210 MOD 2 -210
965-0976-0XX-211-211 -211 MOD 1 -211
965-0976-0XX-212-212 -212 MOD 2 -212
965-0976-0XX-213-213 -213 MOD 2 -213
965-0976-0XX-214-214 -214 MOD 2 -214 MOD 1
965-0976-0XX-216-216 -216 MOD 2 -216 MOD 1
965-0976-0XX-217-217 -217 MOD 1 -217
965-0976-0XX-230-230 -230 MOD 1 -230 MOD 1
965-1690-050 -050 MOD 2
965-1690-054 -054 MOD 1 SEE NOTE 3

NOTES
[1] THE ‘XX’ IN THE ABOVE PART NUMBERS REPRESENT ACTUAL NUMBERS
[2] IF EGPWS PN IS INCLUDED IN TABLE 1 BUT IS NOT LISTED IN THE ABOVE TABLE,
YOU CAN PROCEED TO INSTALL THE NEW DATABASE REGARDLESS OF THE
SOFTWARE MOD LEVELS
[3] FOR PN 965-1690-054, THE INDICATED SOFTWARE MOD LEVEL IS ONLY REQUIRED
IF THE EGPWS MK V BEING UPDATED HAS SMARTLANDING AND/OR SMARTRUNWAY
ENABLED

TABLE 2 : Software Modification Concurrent Requirements

 FORM MNT-1254 R01

JIC SUPPLEMENT JIC CODE PAGE

EO(M)-SB965-0976/1690-34-125-11-JIC REV 04 3 OF 5

FIGURE 1

TERRAIN
DATABASE
VERSION LABEL

FIGURE 1: EGPWS FRONT PANEL

 FORM MNT-1254 R01

JIC SUPPLEMENT JIC CODE PAGE

EO(M)-SB965-0976/1690-34-125-11-JIC REV 04 4 OF 5

FIGURE 2 (SHEET 1 OF 2)

EGPWS
CFG SW
PART NO.
MOD
STATUS

APPL SW
EGPWS MOD
SERIAL NO. STATUS

NOTE: THE ABOVE FIGURE IS ONLY A SAMPLE TO SHOW WHERE TO LOCATE THE INFORMATION
NEEDED. THE ACTUAL PART NUMBERS AND MOD LEVELS ON AIRCRAFTS MAY BE DIFFERENT.
 FORM M NT-1 2 5 4 R01

JIC SUPPLEMENT JIC CODE PAGE

EO(M)-SB965-0976/1690-34-125-11-JIC REV 04 5 OF 5

FIGURE 2 (SHEET 2 OF 2)

EGPWS
PART NO.

EGPWS
SERIAL NO.

HARDWARE
MOD
STATUS

SOFTWARE
MOD
STATUS

FIGURE 2 (SHEET 2 OF 2): ILLUSTRATION OF EGPWS P/N, SOFTWARE MOD STATUS AND
HARDWARE MOD STATUS
NOTE: THE ABOVE FIGURE IS ONLY A SAMPLE TO SHOW WHERE TO LOCATE THE INFORMATION
NEEDED. THE ACTUAL PART NUMBERS AND MOD LEVELS ON AIRCRAFTS MAY BE DIFFERENT.
 FORM MNT-1255
JIC ATTACHMENT JIC CODE PAGE
REV NO.:08
Date: 13-Sep-2023
EO(M)-SB965-0976/1690-34-125-11-JIC 1 OF 1

PARTS AND TOOL REQUIREMENT AND DISPOSITION NUMBER OF KITS

THE FOLLOWING PARTS ARE REQUIRED PER A/C FOR WHICH SUPPLIES SHALL PEREPARE A KIT. PARTS IN THE KIT ARE IDENTIFIED BY A CHECK MARK(X) IN THE KIT
COLUMN. THE TOOLS LISTED IN HERE SHOULD BE PURCHASED OR MANUFACTURED IN ACCORDANCE WITH CODE GIVEN ON CODING COLUMN ONE [1]
ITEM QTY UNIT SPARES PART NUMBER VENDOR
PER
UNIT NEW MFG P/N OLD MFG P/N ET P/N CODE DESCRIPTION CODE KIT REMARK

- Terrain Database XXX with

1 1 EA 996-0109-XXX - - Envelope Modulation Database 24 X See Notes
BXX

NOTES:
1. THE ‘XXX’ IN THE PART NUMBER ARE ACTUAL NUMBERS THAT REPRESENT THE TERRAIN DATABASE VERSION

2. THIS SOFTWARE PART IS TO BE DOWNLOADED FROM HONEYWELL PORTAL AND PREPARED ON PCMCIA CARD
FOR ON-WING INSTALLATION. AFTER DOWNLOAD AND MEDIA PREPARATION, THE SOFTWARE WILL BE AVAILABLE
AT RESPECTIVE TOOL ROOM AND LINE MAINTENANCE PLANNING.

CODES FOR DISPOSITION OF STOCK CODES FOR REMOVED PARTS DISPOSAL CODES FOR REQUIRED PARTS

1- ROUTE TO SHOP FOR SALVAGE 11- RETURN TO STOCK (IF STD STOCK ITEM) 21 - PURCHASE
2- ROUTE TO SURPLUS STOCK 12- ROUTE TO SHOP FOR SALVAGE 22 - DRAW FROM STOCK
3- RETAIN IN STOCK FOR POSSIBLE FUTURE USE 13- ROUTE TO SURPLUS STOCK 23 - LOCAL MANUFACTURE, REFER TO JIC NO.
4- USE UP EXISTING STOCK BUT DON'T REORDER 14- SCRAP 24 - COLLECT FROM TOOL ROOM
5- SCRAP 15- ROUTE TO SHOP/VENDOR FOR REWORK 25 - RECEIVE FROM BOEING FOC
6- ROUTE TO SHOP/VENDOR FOR REWORK 16- SEND TO BOEING 26 - RECEIVE FROM CUSTOMER AND KIT
17 – KIT UNDER THIS EO FOR FUTURE RE-DELIVERY 27-