guilgome@mvsbrcuas2> amosbatch -h

Unknown option: h

Usage: mobatch [options] <sitefile>|<sitelist>|<dumpdir> <command(s)>|<commandfile>|<commanddir> [logdirectory]

Purpose: To send moshell commands to several nodes in parallel.

Arguments:

- The first argument is the sitefile, sitelist, or dumpdir.

The sitefile is a file containing the list of sites to connect to. Each line in the sitefile contains:

* the IP/DNS addresses and/or site names whose IP address are defined in the IP database.

* optionally: the uservariables/scriptingvariables to input with -v option.

See example of sitefile and ipdatabase in: moshell/examples/mobatch_files/

If using the sitelist, the sites are listed on the command line and separated by commas.

Alternatively it possible to specify a whole subnet of nodes with the IP address syntax x.y.z.* (using wildcard on the last
part of the IP address)

The dumpdir is a directory containing:

* MO dumps (format: <kget.log.gz> or <modump.zip>)

* or CVs/dbdat files (format: <cv.zip> or <db.dat>) -> only supported with option "-d"

- The second argument is the commmands or commandfile.

See example of commands below and commandfile in moshell/examples/mobatch_files

If a directory is given, then a different commandfile will be used for each node:

the name of each commandfile should be <node-name>.cmd or <node-name>.mos

the <node-name> should be the same as given in the sitefile.

example: node-name is rbs602 ==> commandfile should be rbs602.cmd or rbs602.mos

- The third argument (logdirectory) is optional. If no logdirectory is specified, a default one will be used.

Options:

-t <minutes> Specify the number of minutes before timing out. Set to 0 for no timeout (default=30 minutes)

-p <processes> Specify the maximum number of moshell sessions that will run in parallel (default=10 parallel
sessions)

-i <seconds> Specify the interval in seconds between spawning of each moshell session (default=0 seconds).

Can be a decimal number. Eg: 0.5 for half a second.

-w <seconds> Specify the interval in seconds between the checks on running sessions (default= 2.5 seconds)

-v <userVariables> Specify moshell uservariables. Type "moshell" on its own for more info about this option.

-o Print output of every moshell session both to screen and to logfile.

-s Silent. No output is printed.

-d Run moshell in sql mode. Only applicable when first argument is a directory ("dumpdir")
 -r Recursive folder search. Only applicable when first argument is a directory ("dumpdir").

-g Gzip logfiles after completion

-n Skip the IP connectivity check at moshell startup

-e Skip sourcing of the global moshellrc file (moshell/jarxml/moshellrc)

-f Skip sourcing of the user's moshellrc file (~/.moshellrc)

-a <rcfile> Source an additional moshellrc file

-b Use a common amos request broker for all spawned amos sessions in order to reduce CPU usage. Only
applicable to amosbatch.

Examples:

mobatch -p 15 -t 60 ~/sitefiles/victoria-sites 'lt all ; get'

mobatch 10.1.128.10 ./cmdfiles/kget.mos

mobatch 10.1.128.10,rnc34,rbs10,mgw1.ericsson.se ./cmdfiles/kget.mos

mobatch ./sitefiles/all-rbs.txt ./cmdfiles/do_healthCheck.mos

mobatch -p 5 -t 1 ./sitefiles/all-rbs.txt 'cv cu ; rbs'

mobatch ./sitefiles/all-rnc.txt 'lt ^utrancell ; st cell'

mobatch ./sitefiles/all-bsc.txt ~/bsc-commandfiles/

mobatch -v security_method=2,sa_credential=~/sam.pbe,sa_password=oemas -p 20 ./all_mgw.txt 'hc'

mobatch -v ip_database=~/utran_network/ipdatabase ~/utran_network/ipdatabase 'lt all ; get '

mobatch modumpfolder/ 'str;std;sti;stv;inv'

mobatch -r modumpfolder/ 'str;std;sti;stv;inv'

mobatch -dr dbdatfolder/ dbc

guilgome@mvsbrcuas2>

4A0661> help

170609-17:48:07 10.44.224.73 16.0n ERBS_NODE_MODEL_F_1_108 stopfile=/tmp/2322

$ help

Command Description

default shell command

? print description of commands

EtHostMo_getPmCounters Get PM counters for a specified host

EtHostMo_startPing

GtpShDump Command syntax:

GtpShPrintProc Command syntax:

Ippmlh Umbrella function for internal COLI commands

IppsrhInfo The IppsrhInfo command has several subcommands;

UdpShDump Command syntax:

UdpShPrintProc Command syntax:

aaconfig Sets TTL timeout for DNS lookups or rejection login interval

aatest Diagnostics for AA server(s), -h for more help

acpapi ACP34DR ACP34API status and control

acparp ACP34DR ARP status and control

acpbasicbh ACP34 Basic BH status and control

acpbasiccmn ACP34BASIC CMN status and control

acpbasicproc ACP34 Basic PROC status and control

acpbh ACP34DR BH status and control

acpcmn ACP34DR CMN status and control

acpdscp ACP34DR DSCP

acpflc ACP34DR FLC status and control

acpfpc ACP34DR FPC

acpfsm ACP34DR FSM status and control

acpiac ACP34DR IAC

acpicmp ACP34DR ICMP status and control

acpix ACP34BASIC IX

acplaid ACP34DR LAID

acplh ACP34DR LH status and control

acppath ACP34DR PATH

acppd ACP34DR PD

acpph ACP34DR PH status and control

acppol ACP34DR POL Policies and counters

acpsa ACP34DR SA and counters

acpsh ACP34DR SH status and control

acpsync ACP34DR SYNC status and control

acptm ACP34DR TM status and counters

arm print LLP armament info

arp Display ARP cache entries

arplist Display ARP table entries

atfConnect Connect an AU via ATFI

autodds Set error check level and/or default trace

banner

bh CommandName:
biosls List installed bios modules

bl list blocks

bmlmdata List loaded modules data

bmpgmconfig Management of Board Manager configuration

bmrdump

boardtemp Read and display values from all configured board temp sensors.

bs Execute a number of commands and print result

buffel Display buffel configuration and usage

bvlq Get value from BVL. BVL_AREA default name if no area-name

capi

cat copy files to stdout

cd change the working directory

cease cease ...

cell Coli commands connected to cell

chkdsk Request a checkdisk on given volume

chmod change access mode of files

cls clear screen (using ANSI codes)

cp copy files. If multiple names are given, the last name must be a directory. Option -R means recursive. Option --
bufsize sets the size of the internal heap buffer to be used.

cpridump Dumps CPRI related info

csti CSTI SERVER TOPOLOGY INFORMATION

cv Configuration version command

dda Send DDA command

devinfo Display real and virtual device info

dhcpinfo DHCP client internal state transition history and message counter info

dig DNS lookup utility

disableBPAIrestart Disables the Restart Board Procedure (No dumps,no stopping of DPs and no board restart)

disableCBCIrestart Disables the Restart Board Procedure (Dump, stop and no board restart)

diskcredit Disk credit command

dnsrinfo display DNS resolver information or reset counters

domlist list all regions in one/all domain(s), optionally showing used physical memory fragments.

dpSetMemDumpAreas Set user memory area to be dumped for <snid>

dpcmd Executes a list of commands

dspMemChange Write DSP Memory

dspMemDump Read DSP Memory

dsp_nmi trigger NMI for DSP with given snid number

dspload Load is presented as: mean [min, max], ...

dspmem Memory is presented as: Pool1, Pool2, ...

dump Print a post mortem dump.See dump -h for more options.

dumpcap dumps OAM IP-communication in pcap format on file

dumpelg Prints HW log entries.

echo echo arguments (-n no newline)

ecodes List the entries in the error code log.

errno print description of errno number

errorlist Print all registrered error codes.

etcmd Type etcmd help for detailed help.

ethernet ethernet shell command

ethmode Ethernet speed/duplex control cmd's

exc Exception Handling: same command as exception

exception Exception Handling: same command as exc

exit exit the current shell

fault fault ...

formathd Format the Hard Disk

froInfo A detailded description

froInfo-lmcentral A detailded description

froInfo-lmmonitor A detailded description

froLog-lmcentral A detailded description

froLog-lmmonitor A detailded description

fssls list fss objects

gdbtp Command for handling trace point experiment

getAttrObj Get attributes for an object.

getDiskDataObj Get attributes for disk for an object.

getProcessorLoad Get processor load for a PIU.

getpri This command has been disabled

getstat Internal Event Statistics

gpax Accessing and setup the internal GPA_X switch

gps01reset Reset GPS01 receiver and clear positioning data

gps02reset Command used to clear and/or reset GPS02 receiver

gpscapture Capture NMEA messages to and from GPS receivers

gpsprot Change protocol between Furuno and Ericsson Combined

gpssend Send message to the GPS receiver

gpsstatus Print the status of GPS receiver

gz Compress/decompress file(s)
hanging_ues Coli command to check and count the number of hanging UEs in all active cells

hdinfo Hard disk parameter information

hdstat Hard disk statistics printout

heapinfo Heap information (for proc/seg)

help print description of commands

hicap Used to enable, disable hicap or toget current hicap settings

hili Hardware Inventory Log Handling commands

hooks Print all registered error, dump and reset hooks.

hostname show or set hostname

hwpid Read hardware pid from specified target

iacrh IACRH debug and utilities

idux IDUX_DRV

iexsCt Usage:

iexsrm Displays IEXS resource manager specific info.

ifconfig Print IP address

ifmcstat Dump multicast group management statistics per interface

iked IKE debug commands

ikepeerfh IKEPEERFH SWB debug

ikerh IKERH SWB debug

ikev2 IKEv2 debug commands

ipac_ipadm Status info for the IPAC IP Adm administrator program

ipac_ipsyncref Status info for the IPAC IP Sync Ref administrator program

ipcp_bh Status info for the IPCP board handler administrator program

ipcp_dh Status info for the distribution handler administrator program

ipcp_lh Status info the IPCP link handler administrator program

iphoststatus Status info for the hosts

ipiffh IPIFFH SWB debug

ipsecfh IPSECFH SWB debug

ipsectunnelfh IPSECTUNNELFH SWB debug

iptransmode information about ip transport settings

ixrh IEXS::IXRH Topology

jdumpthreads Dump the stack trace of Java threads

jheapdump Dump the heap statistics of Java classes

jheapinfo Java heap information

keys configure/display terminal key settings

killIfc Kill a named interface

lhsh Execute command on remote processor

license License server command (license <cmd>)

linkstat HDLC state and statistics for MP-ATF.

linxeth Tool for getting information about LINX ethernet connections

linxtrace Enable or Disable LINX dc_disconnect trace

listObj List an object.

list_filterobj Print filter data

list_traceobj Print trace data

listenv list environment variables for <processes> and their corresponding block.

listloaded List Loaded Modules

lkmcfg View/create/delete Linx Ethernet links

llog Read error log

ln make a link from one file to another

load_zone Command to display LoadZone information

log Log server command

logattributes List the attributes for a log

loglevel Set loglevel for OSENET.

loglist Lists all available logs

ls list files

maciDumpSession Dump session related information

man man command

mch MCH info

md5 prints MD5 checksum for a file

mdio read registers from devices connected to mdio bus

memwatch Keeps track of memory allocations

migrate Migrate a program to a core

mkdir create directories

mm Display MM run-time state information

mpcmd Type mpcmd help for detailed help.

mploadctrl Coli commands of MP Load Control data

msi_list Print region data for MSI

mv rename/move files

namelookup List registered services and pending lookups

nattstatus Show NAT-T status

nbs NBS

ncdbi Dumps nc internal structure

ncli ncli: start NCLI session to access CS.

ncpLinkStatus This command displays the EIOA link status.

ncpMacAutoNegGet This command displays the state of the port Auto Negotiation enable flag

ncpMacStatistics This command displays the contents of the MAC statistics registers.

ncpMacStatus This command displays MAC port status.

ncpMtmGlobalStats This command reads and prints the MTM global statistics counters.

ncpVersion This command displays the version of RTE being used.

ndp Display NDP cache entries

netstat Display net statistics

node_id node identity commands

nsdbg nsdbg enable

nsinfo Nameserver information commands

nssbasicinfo gets current pll state

nssgetidl2jb prints jitter buffer depth on a given port

nssmpinfo Get NSS MP status information

nssrefchangeinfo Get 20 latest reference switches

nssscspiinfo Get all client and subscriber info

nsssysclkinfo Get 20 latest SystemClock changes

nsstableinfo Get NSS MP table information

nsstraceidl2jb traces jitter buffer depth on in trace5 ofNSS_SYNCDRIVER_MEASURE with given timeout in ms

ntp NTP handling commands.

ntpconfig get ntp info

ntprecover ceases an NTP alarm and adjusts the node system time to the external NTP reference time

ospi_CXC1321315 Prints ospi status

pcapexplorer Lists dumpcap traces. Traces can be deleted with the -d option

pci PCI configuration read/write utility.

pgmUpgradeObj Soft program upgrade

ping The command verifies the IP connectivity to a host.

ping6 Verify the IPv6 connectivity to another IPv6 system

pm With the pm command it is possible to enable trace for a set of pm counters which is used together with the trace
object PM_COUNTERS

pm_create Create a program.

pm_ff Print all file formats supported.

pm_install install a load module

pm_kill Kill program

pm_lmconf Print configuration for a load module image.

pm_lminfo Print information for a/all load module image(s).

pm_pgconf Print configuration for a program.

pm_pginfo Print information for a/all program(s).

pm_pt Print all program types supported.

pm_start Start a program.

pm_uninstall Uninstall a load module image

poolinfo List information about pools

preload Loads the flash with the specified programs

printf ,redirect printf or end redirections

ps list processes

pwd print the working directory

qs List signals in a process signal queue

rcmd remote command execution

rdfpga Reads registers from the FPGA.

rdsfp Reads info related to given SFP.

readclock Read system clock [unix date format]

readdspeventlog Read event log from DSP

reload Restart the board (default warm)

restartObj restarts an object.

ricm Print selected debug info. Call without args for help.

rlc Clear the ramlog

rld Display ramlog

rlw Write a string to the ramlog

rm remove files

rmdir remove (empty) directories

route Display or modify route table

rpmm ram pmm commands

rrt-cell rrt-cell commands for one instance of Cell

rrt-cell_1 Type 'rrt-cell_1 help' to display RoseRT debugger commands

rrt-central Type 'rrt-central help' to display RoseRT debugger commands

rrt-monitor Type 'rrt-monitor help' to display RoseRT debugger commands

rsock Configure/query rsock deamon.

run Runs all intercepted processes

sadprint Printout of the Security Association Database (SAD)

sctp_config prints some SCTP-ROF configuration data

sctpadm cmd sctpadm lists info about all Sctp Associations in SCTP ADM

sctpadm_config cmd sctpadm_config lists some configuration data in SCTP ADM.

sctpadm_info cmd sctpadm_info lists all process info in SCTP ADM

sctpadmrofcmd cmd sctpadmrofcmd send trace settings to user plane.

sctphost Prints some SCTP-ROF configuration data, statistical information and lists association or endpoint info in SCTP
Host.

sctphost_info cmd sctphost_info lists association or endpoint info in SCTP HOST

sctphost_stat cmd sctphost_stat prints some statistical information

sctphosttrace Configure log filtering and dumping internal log.

serialport UART device driver settings

setclock Set Clock

setkey Configure manual SAs and SPs

setlowsp Set terminal speed to 9600 baud

setpri This command has been disabled

shell invoke shell

sigs List information about signals

sleep This command has been disabled

sma Prints SMA status and container data

sockstat List open sockets

spdel Delete a system parameter.

spdprint Printout of the Security Policy Database (SPD)

spedit Edit system parameters interactively

splitethcdbg Returns debug information fetched from split eth client.

splitethevent controls logging frequency for eventID 5

splitethsdbg Returns debug information fetched from ose_split_server.

splitethstat Shows/clears statistics of split ethernet server/client.

spmod Stepwise view and modify system parameters.

spr Read a system parameter.

spray

spw Write a system parameter.

srioconf Read/write srio device registers

ss Show maximum process stack usage

stat report information about file/directory

supervision enables/disables supervision of DSP's

swcon Set or print srio switch congestion stats

swdump Print srio switch registers

switchObj Switch an object.

swperf Enable/Disable or print srio switch performance stats

swport Enable/Disable port on srio switch

sync synchronize volume with disk

syncinfo Get general Synchronization information

syspar Get or set system parameters

te Trace & Error Handling commands

tempmostorage Coli commands showing temporary MO storage data

term display info about terminal

tetxt Adds INFO trace to CPP T&E log.

tm target monitor command

traceroute The command finds the routing path to a certain host.

traceroute6 Verify IPv6 routing to another IPv6 system

uart UART device driver statistics and settings

ue Coli commands connected to ue monitoring

umask display/set the current file system mask

uptime display system uptime

uselmc Selects an LMC

vii VII info

vlandev Create or remove VLAN device

vols report volume statistics

wrfpga Writes to a register in the FPGA.

zzosvarp Show the address of the OSE kernel data handle.

4A0963> u! $undocommandfile

170622-12:38:43 10.44.177.9 16.0n ERBS_NODE_MODEL_F_1_108 stopfile=/tmp/9215

Result saved to: /var/opt/ericsson/amos/moshell_logfiles/guilgome/logs_moshell/undo/undo_4A0963_170622-121559.mo

($undotrunfile).

4A0963> u! $undodelcommandfile

170622-12:39:30 10.44.177.9 16.0n ERBS_NODE_MODEL_F_1_108 stopfile=/tmp/9215

Result saved to: /var/opt/ericsson/amos/moshell_logfiles/guilgome/logs_moshell/undo/undo_4A0963_170622-

121559_del.mo ($undotrunfile).

4A0963>