SMART Transmitter Power Supply

KCD2-STC-Ex1.2O.ES
< 1-channel isolated barrier
< 24 V DC supply (Power Rail)
< Input for 2-wire SMART transmitters and current sources
< Signal splitter (1 input and 2 outputs)
< Dual output 0/4 mA ... 20 mA or 0/1 V ... 5 V
< Terminal blocks with test sockets
< Up to SIL 3 acc. to IEC/EN 61508

Function
This isolated barrier is used for intrinsic safety applications.
The device supplies 2-wire transmitters in the hazardous area, and can also be used with current sources.
It transfers the analog input signal to the safe area as two isolated output signals.
Bi-directional communication is supported for SMART transmitters that use current modulation to transmit data and voltage modulation to receive
data.
The output is selected as a current source, current sink, or voltage source via switches.
Test sockets for the connection of HART communicators are integrated into the terminals of the device.

Application
The device supports the following SMART protocols:
l HART

l BRAIN

Connection

KCD2-STC-Ex1.2O.ES

- +
1+ 5 + V
HART

I
HART

HART

+ -
6
2-
3+
- +
HART

7
Release date: 2023-06-01 Date of issue: 2023-06-01 Filename: 286746_eng.pdf

mA + V
II
+ -
4- 8

9+
10-
24 V DC

Zone 0, 1, 2 24 V DC Zone 2
Div. 1, 2 Power Rail Div. 2

Technical Data
General specifications
Signal type Analog input
Functional safety related parameters
Safety Integrity Level (SIL) SIL 3
Systematic capability (SC) SC 3
Supply

Refer to "General Notes Relating to Pepperl+Fuchs Product Information".

Pepperl+Fuchs Group USA: +1 330 486 0002 Germany: +49 621 776 2222 Singapore: +65 6779 9091
www.pepperl-fuchs.com [email protected] [email protected] [email protected] 1
 SMART Transmitter Power Supply KCD2-STC-Ex1.2O.ES
Technical Data
Connection Power Rail or terminals 9+, 10-
Rated voltage Ur 19 ... 30 V DC
Ripple within the supply tolerance
Power dissipation approx. 1.4 W at 20 mA transfer current, 250 Ω in both outputs
Power consumption 2W
Input
Connection side field side
Connection terminals 1+, 2- (sink); 3+, 4- (source)
Input signal 0/4 ... 20 mA
Voltage drop terminals 3, 4: ≤ 6.1 V at 20 mA
Short-circuit current terminals 1+, 2-: 25 mA
Input resistance terminals 1+, 2-: max. 500 Ω (BRAIN)
(250 Ω load)
Available voltage terminals 1+, 2-: ≥ 16 V at 20 mA , ≥ 18.5 V at 4 mA
Output
Connection side control side
Connection source: terminals 5-, 6+; 7-, 8+
sink: terminals 5+, 6-, 7+, 8-
Load channel 1: 0 ... 500 Ω (20 mA)/> 1 MΩ (5 V)
channel 2: 0 ... 500 Ω (20 mA)/> 1 MΩ (5 V)
Output signal 0/4 ... 20 mA or 0/1 ... 5 V
Ripple max. 50 µA rms
Transfer characteristics
Deviation Iout < 20 µA (0.1 %); Vout < 10 mV (0.2 %) incl. calibration, linearity, hysteresis and
fluctuation of supply voltage, at 20 °C (68 °F), 0/4 ... 20 mA, 0/1 ... 5 V
Influence of ambient temperature current output: 0.25 µA/K
voltage output: 80 µV/K
Frequency range field side into the control side: bandwidth with 0.5 Vpp signal 0 ... 6 kHz (-3 dB)
control side into the field side: bandwidth with 0.5 Vpp signal 0.3 ... 6 kHz (-3 dB)
Settling time 6 ms
Rise time/fall time 2 ms
Galvanic isolation
Output/power supply functional insulation, rated insulation voltage 50 V AC
Output/Output functional insulation, rated insulation voltage 50 V AC
Indicators/settings
Display elements LED
Control elements DIP switch
Configuration via DIP switches
Labeling space for labeling at the front
Directive conformity
Release date: 2023-06-01 Date of issue: 2023-06-01 Filename: 286746_eng.pdf

Electromagnetic compatibility
Directive 2014/30/EU EN 61326-1:2013 (industrial locations)
Conformity
Electromagnetic compatibility NE 21:2012
EN 61326-3-2:2008
Degree of protection IEC 60529:2001
Protection against electrical shock UL 61010-1:2012
Ambient conditions
Ambient temperature -20 ... 60 °C (-4 ... 140 °F)
extended ambient temperature range up to 70 °C (158 °F), refer to manual for
necessary mounting conditions
Mechanical specifications
Degree of protection IP20
Connection screw terminals
Mass approx. 100 g
Dimensions 12.5 x 124 x 114 mm (0.5 x 4.9 x 4.5 inch) (W x H x D) , housing type A2

Refer to "General Notes Relating to Pepperl+Fuchs Product Information".

Pepperl+Fuchs Group USA: +1 330 486 0002 Germany: +49 621 776 2222 Singapore: +65 6779 9091
www.pepperl-fuchs.com [email protected] [email protected] [email protected] 2
 SMART Transmitter Power Supply KCD2-STC-Ex1.2O.ES
Technical Data
Mounting on 35 mm DIN mounting rail acc. to EN 60715:2001
Data for application in connection with hazardous areas
EU-type examination certificate BASEEFA 13 ATEX 0077 X
Marking 1 II (1)G [Ex ia Ga] IIC
1 II (1)D [Ex ia Da] IIIC
1 I (M1) [Ex ia Ma] I
Input [Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I
Supply
Maximum safe voltage Um 250 V (Attention! The rated voltage can be lower.)
Equipment terminals 1+, 2-
Voltage Uo 25.2 V
Voltage Uq 28.2 V
Current Io 93 mA
Power Po 656 mW
Internal capacitance Ci 10 nF
Internal inductance Li 0 mH
Equipment terminals 3+, 4-
Voltage Ui 30 V
Current Ii 115 mA
Power Pi 700 mW
Voltage Uo 5V
Current Io 6.8 mA
Power Po 1.6 mW
Output
Maximum safe voltage Um 250 V (Attention! The rated voltage can be lower.)
Certificate BASEEFA 13 ATEX 0078 X
Marking 1 II 3G Ex nA IIC T4 Gc
Galvanic isolation
Input/Output safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Input/power supply safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Directive conformity
Directive 2014/34/EU EN IEC 60079-0:2018+AC:2020 , EN 60079-11:2012 , EN 60079-15:2010
International approvals
UL approval
Control drawing 116-0380 (cULus)
IECEx approval
IECEx certificate IECEx BAS 13.0043X
IECEx marking [Ex ia Ga] IIC , [Ex ia Da] IIIC , [Ex ia Ma] I
Release date: 2023-06-01 Date of issue: 2023-06-01 Filename: 286746_eng.pdf

General information
Note Both output loads must be connected to ensure complete and correct operation within
the technical specification.
Supplementary information Observe the certificates, declarations of conformity, instruction manuals, and manuals
where applicable. For information see www.pepperl-fuchs.com.

Refer to "General Notes Relating to Pepperl+Fuchs Product Information".

Pepperl+Fuchs Group USA: +1 330 486 0002 Germany: +49 621 776 2222 Singapore: +65 6779 9091
www.pepperl-fuchs.com [email protected] [email protected] [email protected] 3
 SMART Transmitter Power Supply KCD2-STC-Ex1.2O.ES
Assembly

Front view

Removable terminals
blue

1 2
3 4

LED green:
KCD2-STC-
Ex1.2O.ES
Power supply

PWR

S1
S2
S3
S4
I II

Switches S1, S2, S3, S4

5 6
7 8
9 10

Removable terminals
green

Matching System Components

KFD2-EB2 Power Feed Module

UPR-03 Universal Power Rail with end caps and cover, 3 conductors, length: 2 m

UPR-03-M Universal Power Rail with end caps and cover, 3 conductors, length: 1,6 m

UPR-03-S Universal Power Rail with end caps and cover, 3 conductors, length: 0.8 m

K-DUCT-BU Profile rail, wiring comb field side, blue

K-DUCT-BU-UPR-03 Profile rail with UPR-03- * insert, 3 conductors, wiring comb field side, blue
Release date: 2023-06-01 Date of issue: 2023-06-01 Filename: 286746_eng.pdf

Accessories
KC-ST-5GN Terminal block for KC modules, 2-pin screw terminal, green

KC-STP-5GN Terminal block for KC modules, 2-pin screw terminal, with test sockets, green

KC-STP-5BU Terminal block for KC modules, 2-pin screw terminal, with test sockets, blue

KF-CP Red coding pins, packaging unit: 20 x 6

Refer to "General Notes Relating to Pepperl+Fuchs Product Information".

Pepperl+Fuchs Group USA: +1 330 486 0002 Germany: +49 621 776 2222 Singapore: +65 6779 9091
www.pepperl-fuchs.com [email protected] [email protected] [email protected] 4
 SMART Transmitter Power Supply KCD2-STC-Ex1.2O.ES

Configuration

S1 ... S4

Output switch settings

Output 1 S1 S2
Current source output I II
Current sink output II II
Voltage output I I
Not valid II I

Output 2 S3 S4
Current source output II I
Current sink output II II
Voltage output I I
Not valid I II

Factory settings: current source output, for both channels.

Release date: 2023-06-01 Date of issue: 2023-06-01 Filename: 286746_eng.pdf

Refer to "General Notes Relating to Pepperl+Fuchs Product Information".

5
Pepperl+Fuchs Group USA: +1 330 486 0002 Germany: +49 621 776 2222 Singapore: +65 6779 9091
www.pepperl-fuchs.com [email protected] [email protected] [email protected]