Network Valid Host Broadcast
Address Range Address
/28 [Link] 1.1 – 1.14 [Link]
/28 [Link] 1.17 – 1.30 [Link]
/28 [Link] 1.33 – 1.46 [Link]
/28 [Link] 1.49 – 1.62 [Link]
/28 [Link] 1.65 – 1.78 [Link]
/28 [Link] 1.81 – 1.94 [Link]
/28 [Link] 1.97 – 1.110 [Link]
/28 [Link] 1.113 – 1.126 [Link]
/28 [Link] 1.129 – 1.142 [Link]
/28 [Link] 1.145 – 1.158 [Link]
/28 [Link] 1.161 – 1.174 [Link]
/28 [Link] 1.177 – 1.190 [Link]
/28 [Link] 1.193 – 1.206 [Link]
/28 [Link] 1.209 – 1.222 [Link]
/28 [Link] 1.225 – 1.238 [Link]
/28 [Link] 1.241 – 1.254 [Link]
Name: Oliveros, Christian Joshua R. Date: April 26, 2024
Year & Section: 2 BSIT-B Subject: NET 101
Router>
Router>en
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#
Router(config)#int f0/0
Router(config-if)#ip add [Link] [Link]
Router(config-if)#no shut
Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
Router(config-if)#
Router(config-if)#ex
Router(config)#
Router(config)#int f1/0
Router(config-if)#ip add [Link] [Link]
Router(config-if)#no shut
Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet1/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet1/0, changed state to up
Router(config-if)#ex
Router(config)#int s3/0
Router(config-if)#ip add [Link] [Link]
Router(config-if)#no shut
%LINK-5-CHANGED: Interface Serial3/0, changed state to down
Router(config-if)#
Router(config-if)#ex
Router(config)#
Router(config)#int s2/0
Router(config-if)#ip add [Link] [Link]
Router(config-if)#no shut
%LINK-5-CHANGED: Interface Serial2/0, changed state to down
Router(config-if)#
Router(config-if)#ex
Router(config)#
Router(config)#
Router>enable
Router#
Router#conf
Configuring from terminal, memory, or network [terminal]?
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#configure terminal
^
% Invalid input detected at '^' marker.
Router(config)#
Router(config)#int s2/0
Router(config-if)#ip add [Link] [Link]
Router(config-if)#no shut
Router(config-if)#
%LINK-5-CHANGED: Interface Serial2/0, changed state to up
Router(config-if)#
Router(config-if)#
%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial2/0, changed state to up
ex
Router(config)#ex
Router#
%SYS-5-CONFIG_I: Configured from console by console
Router#
Router#
Router#int s3/0
^
% Invalid input detected at '^' marker.
Router#config t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#
Router(config)#int s3/0
Router(config-if)#ip add [Link] [Link]
Router(config-if)#no shut
%LINK-5-CHANGED: Interface Serial3/0, changed state to down
Router(config-if)#
Router(config-if)#ex
Router(config)#int f0/0
Router(config-if)#ip add [Link] [Link]
Router(config-if)#no shut
Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
Router(config-if)#
Router(config-if)#
Router#
%SYS-5-CONFIG_I: Configured from console by console
Router#
Router>
Router>en
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#int f0/0
Router(config-if)#ip add [Link] [Link]
Router(config-if)#no shut
Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
Router(config-if)#ex
Router(config)#
Router(config)#int f1/0
Router(config-if)#ip add [Link] [Link]
Router(config-if)#no shut
Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet1/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet1/0, changed state to up
Router(config-if)#
Router(config-if)#ex
Router(config)#int s2/0
Router(config-if)#ip add [Link] [Link]
Router(config-if)#no shut
Router(config-if)#
%LINK-5-CHANGED: Interface Serial2/0, changed state to up
Router(config-if)#
Router(config-if)#
%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial2/0, changed state to up
ex
Router(config)#int s3/0
Router(config-if)#ip add [Link] [Link]
Router(config-if)#no shut
Router(config-if)#
%LINK-5-CHANGED: Interface Serial3/0, changed state to up
Router(config-if)#
Router(config-if)#
%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial3/0, changed state to up
ex
Router(config)#
