Scribd
Upload
26 views

CD28IR IP Quick User Guide

Uploaded by

posas47691
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
26 views

CD28IR IP Quick User Guide

Uploaded by

posas47691
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 25

Wireless P2P Cellphone Camera

Chapter 1 Features
●P2P (peer to peer) technology, without annoying IP settings simply fill out the
ID number can be obtained surveillance video.
●Cellphone view allow you remote viewing from anywhere anytime
●Support iPhone、Android
●Wi-Fi compliant with wireless standards IEEE 802.11b/g;
●Suport Pan/Tilt control up and down,rotation, auto-cruise from different
angles (Pan:355°& Tilt:120°);
●Auto IR-LED illumination for night vision (up to 10 metres);
●Nice blue indicator light ;
●Two-way audio, New voice technology, support cellphone intercom（distance：
20-30m）;
●Two-dimensional code scanning functions.

Chapter 2 Installation
2.1
1) First: connect the camera with hub, switch or router by Cat.5 straight-through
cable or cross-over cable with standard RJ-45 interface.
2) Second: connect the camera with power supply by the adaptor supplied (DC5V,
2A).
Caution: Please ensure that the adaptor matches with the electricity (Input: AC 110V
or 220V, Output: 5V DC/2A).

2.2 Interface

Chapter 3 Access from Smartphone


3.1 Smartphone must have a data service（WIFI/GPRS/3G）
3.2 Install software on your Smartphone
Android：Acquire software from CD.
Iphone：Acquire “P2Pipcamera” from App Store.

3.3 Add Camera:


“Add Camera” click “+”
Enable users to edit camera ID, user's name and password setting and the
change of equipment alias .
“Scan”Two-dimensional code scanning acquire camera ID.
3.4 Device list.

3.5 Function：
snapshot

speaker/mic （can not be open at the same time）

birghtness/contrast

restore the default

resolution : VGA（640×480）QVGA（320×240）

ratio

cruise

Flip /Mirror

close

touch screen to control PTZ

Chapter 4 PC Software Instruction


4.1 Find “DeviceClient.msi” in the CD and run it like below pic.
4.2
Click "Browser" to select setup path(default path "C:\Program Files\object\Device
Client "),then click "Next" like below pic.

4.3 Click "Next",then go the below pic.


4.4 Click "Finish" to end the setup,at the time it will come up this icon in the desktop

“ ”.

4.5 Click“System—Device list”


4.6 Add a lan camera :
Open search tools,click “search”

IP acquisition：
① Confirmed that the device is turned on and connected to the network
normal.

② LAN or PC support DHCP（Dynamic IP allocation），because the


camera's factory settings dynamically IP, LAN or PC does not open DHCP, occurs
not search the camera IP.

Double click IP address，,then go the below pic，“OK”.

4.7 Add a remote camera：

click“add”，then go the below pic:


Device：The names of equipment, which can help you identify different devices, for
examples, you can type the names based on the location of the equipment.
User：Usually the default is "admin";
Pwd：he default of password is usually as " ",
Video：According to the machine model selection（model 5030:mjpeg）

P2P：
DID：camera ID（search in lan）
Click "OK" to end the setup.

4.8 paly Video


drag （Device name） play video
Note：Select the correct video stream ，For example :MJPEG

4.9
Speaker（For audio ip camera only）
Mic（For audio ip camera only）
record
snapshot
4.10 “System—System configuration”.

4.11 Screen：1/4/9/16/25/36/49/64/Full Screen


4.12 Function keys

Control the PT（For PT ip camera only）

cruise（For PT ip camera only）

cruise（For PT ip camera only）

OSD：Display the camera name and time

Flip /Mirror

IO closed（For IO ip camera only）

IO Open（For IO ip camera only）


Chapter 5 camera parameter setting
Double-click （Device name）parameter setting

5.1 Base Info


Click“Get”Base Info
Allas：Device name
Device Firmware
Device ID
Device Alam Status
UPNP Status
DDNS Status
MAC Adress
WIFI MAC Adress

Click“Get” Display device information

5.2 Time and date


Obtain the time from a PC or from the server to get the time, if there is no access to
the Internet only get from the PC.
click“Submit” Save the settings，click“Get” The new setting is displayed.

5.3 Network

Set the subnet mask, gateway, and DNS server; following figure check DHCP, the
device can automatically obtain an IP address.
click“Submit” Save the settings，click“Get” The new setting is displayed.

5.4 User and Password

Administrator，Visitor and Operator


Administrator：All permissions
Visitor：only view the video and switch the screen.
Operator：In addition to not enter the interface of the device parameters, have other
privileges.
click“Submit” Save the settings，click“Get” The new setting is displayed.

5.5 Mail Service Settings


If the camera is connected to the Internet, set this function.

Sender: input a valid email address to send pictures when alarm triggered;
SMTP Server： the website your mail（sender）;；For example QQmail：smtp.qq.com
SMTP Port：the website Port your mail（sender）
SMTP User and Password: the user and password of the sender (email account and
password).
Receiver: input a valid e-mail address to receive pictures when alarm triggered. Now
it supports up to 4 receivers.
click“Submit” Save the settings，click“Get” The new setting is displayed.

5.6 FTP
Ftp service is used to send the captured pictures when alarm triggered to ftp server
and save them. If the camera is not connected to the Internet, there is no need to set
this function.
FTP Server: the website you want to upload the picture to;
FTP Port: 21
FTP User: user name to login ftp server;
FTP Password: password to login ftp server;
Upload Interval (Seconds): set the upload interval; unit: second.
click“Submit” Save the settings，click“Get” The new setting is displayed.

5.7 DDNS
Acquire a dynamic domain name;
For example：Logon www.dyndns.com.

5.8 PTZ
Rotating speed
click“Submit” Save the settings，click“Get” The new setting is displayed.

5.9 Alarm
Motion Detect Armed: Moving objects trigger alarm;
Motion Detect Sensibility can be selected as 1~10 with sensitivity increasing;

Alam preset linkage


IO Linkage on Alarm: when alarm triggered, it will link the external device connected
with IO port;（For IO ip camera only）
Send Alam Notification by Mail：snapshot and send email on alarm. For details,
please refer to “Mail Service Settings”;
Upload Image on Alam：Upload images to ftp server on alarm. Upload Internal can be
set. For details, please refer to “Ftp Service Settings”;

click“Submit” Save the settings，click“Get” The new setting is displayed.

5.10 WI-FI setting

Please select Wireless Lan Settings and click“Scan”. Then the camera scans the
WLAN nearby and lists the results.
you can fill in the Keys according to the wireless network settings of your wireless
router. Select None if no encryption is set.
As it’s correctly set, please pull out the network cable and the camera will reboot.
click“Submit” Save the settings，click“Get” The new setting is displayed.
Chapter 6 Web
6.1
Use of computers and cameras within a LAN
1) Open the CD

2) copy to desktop

double-click the above icon and a dialogue box appears: the IP address of
the camera will appear after several seconds later.

IP acquisition：

① Confirmed that the device is turned on and connected to the network


normal.

② LAN or PC support DHCP（Dynamic IP allocation），because the


camera's factory settings dynamically IP, LAN or PC does not open
DHCP, occurs not search the camera IP.
6.2 Login
Input the URL (for example, http://192.168.2.108：81) or enter the home page
by ip camera tool mentioned above.
Input the user name and password (default user: admin; no password). Click
“OK” and enter the monitoring page (Max. 4 users viewing simultaneously).

Language optional: Traditional and Simplified Chinese, English, Russian, Deutsch.


Note: There are three modes optional for different applications. Please select one
according to your web browser.
6.3
If it’s the first time a camera being viewed in a PC, .an OCX file needs installing in
the PC. Please download OCX file and install it. Next, please refresh the page and
login again.

6.4 Function keys


Control the PT（For PT ip camera only）

cruise（For PT ip camera only）

cruise（For PT ip camera only）

OSD：Display the camera name and time

Flip /Mirror

IO closed（For IO ip camera only）

IO Open（For IO ip camera only）


Mode： 50HZ/60HZ
Resolution： VGA（640×480）and QVGA（320×240）
Frame rate：1-30
PTZ Speed
Brightness
Contrast
Default video param all
Preset

1/4/9CH

：Speaker（For audio ip camera only）

：Speaker/ Mic two-ways audio（For audio ip camera only）


：Record

：Snapshot

：parameter setting

You might also like