mutu certification Komite Akreditasi NASIONAL

GREEN B
international Lembaga Sertifikasi Sistem Mutu
LSSM - 008 - IDN

UIL
DIN
G
CO
NC ACCREDITED

U
IL PRODUCT SYSTEM BY
IN
D ON E
SI A

Sistem atap tanpa sambungan pertama dan hanya bergerak di Indonesia

 PEMEGANG REKOR DUNIA UNTUK ATAP TANPA SAMBUNGAN
SEJAK September 2013
IS THE WORLD’S RECORD HOLDER FOR CONTINUOUS ROOFING
SINCE SEPTEMBER 2013

Pada 9 September 2013

PT.UTOMODECK METAL On 9 September 2013
WORKS berhasil PT.UTOMODECK METAL
memecahkan proyek dunia WORKS managed to break the
sebagai atap tanpa world as a roofing project
sambungan terpanjang di without connection longest in
dunia, dengan panjang sekitar the world, with a length of
200,9 m dengan lokasi di kota approximately 200.9 m with
Rembang,Jawa Tengah, the location in the city of
Indonesia sebagai atap Rembang, Central Java,
Gudang Batu bara di PLTU Indonesia as a coal warehouse
Rembang yang sekaligus roof at the Longest Roof in The
Terbesar di Dunia. World.
 SPESIALIS ATAP BANGUNAN
BENTANG BESAR
LONGSPAN BUILDING
ROOF MANUFACTURE SPECIALIST

PRODUKSI ATAP GELOMBANG MOBILE SISTEM

MOBILE ROOF PRODUCTION SYSTEM

Untuk Hanggar, Pabrik, Gudang, Gedung Olah Raga Dll.

Bahan : ZINCALUMUNIUM COATED WARNA
ALUMUNIMIUM EMBOSSED
STAINLESS STEEL dan lalin-lain.
Bahan sesuai dengan kebutuhan proyek.
For hangar, factory, warehouse, Gymnasium Etc.
Material: COLOR COATED ZINCALUMUNIUM
Embossed ALUMUNIMIUM
STAINLESS STEEL and Traffic-other.
Materials according to project needs.
 WITHOUT

PENUMPUKAN DI PABRIK
Stacking IN FACTORY

PABRIK
FACTORY

TRANSPORTASI TRUCK/CONTAINER
TRUCK TRANSPORTATION / CONTAINER
PENUMPUKAN DI PROYEK
Buildup in the PROJECT
ю PANJANG TERBATAS ю LONG LIMITED
ю HASIL TIDAK OPTIMAL ю NOT OPTIMAL RESULTS
ю RESIKO KERUSAKAN TINGGI ю HIGH RISK OF DAMAGE
ю EKSPOSE UDARA TINGGI ю EXPOSURE HIGH AIR

PENGANGKATAN
KE ATAS KONSTRUKSI
RAWAN
HUMAN ERROR / PESOK
APPOINTMENT
TO THE CONSTRUCTION
PRONE
HUMAN ERROR / DENTED
PEMASANGAN KONSTRUKSI ATAP
INSTALLATION OF ROOF CONSTRUCTION

ю BANYAK SAMBUNGAN ю MANY CONNECTIONS

ю RESIKO BOCOR TINGGI ю HIGH RISK
ю HASIL TIDAK MAKSIMAL ю NO MAXIMUM RESULTS

RESIKO
PEMASANGAN
TANPA MOBILE SYSTEM
RISKAN TERKENA ANGIN,
TIDAK KOMPAK MENARIKNYA

RISK
INSTALLATION
NO MOBILE SYSTEM
WIND AFFECTED RISKY,
COMPACT NOT WITHDRAW
 KEUNTUNGAN
MENGGUNAKAN MOBILE SYSTEM
ADVANTAGES OF
USING MOBILE SYSTEM

• Panjang tanpa sambungan sesuai dengan • Length without connection in accordance

kebutuhan proyek with project requirements
• Aman (tidak patah, tidak lecet) • Safe (not broken, no blisters)
• Terhindar dari rusak akibat ulah pekerja • Protected from damaged because of handling
• Bisa lengkung (RADIAL) • Can be curved (RADIAL)
• Mempercepat waktu pemasangan • Speed ​up installation time
• Tinggi gelombang menjamin tidak bocor • High surge guarantee does not leak
• Mencegah terjadinya karat akibat penumpukan • Prevents rust buildup due to project location
dilokasi proyek sebelum pemasangan before installation (puddles can cause damage
(genangan air dapat mengakibatkan rusaknya to the structure of the coating, making it easy to
struktur coating, sehingga mudah berkarat) rust)
• Hasil produksi original quality. • The production of original quality.

www.utomodeck.com
.8383
 NOK BIASA CRIMPING RIDGE CAP

1. Profil Nok tidak sesuai 1. Memiliki alur yang sesuai

dengan profil atap. dengan profil atap yang
2. Tampias air hujan dapat dipesan.
mengakibatkan bocor. 2. Tidak ada resiko tampias air.
3. Penutupan atap lebih
sempurna.

.8383
 Perbedaan Penggelombangan & Pemasangan
DIPABRIK DILOKASI PROYEK MOBILE SYSTEM
Panjang max 12m sesuai kemampuan truk Panjang tidak terbatas Panjang tidak terbatas
Resiko pesok naik turun kendaraan ada Tidak ada Tidak ada
Resiko patah waktu dinaikkan ke gording ada Ada Tidak Ada
Resiko karat akibat penumpukkan diproyek Resiko karat akibat penumpukkan diproyek Tidak ada Resiko karat
karena embun/genangan air hujan karena embun/genangan air hujan akibat penumpukkan/ Original Quality
Boros 20Cm untuk penyambungan Tidak ada penyambungan Tidak ada penyambungan
Resiko bocor dan karat Tidak ada resiko bocor Tidak ada resiko bocor
karena penyambungan ada dikarenakan overlap (tanpa sambungan) dikarenakan overlap (tanpa sambungan)
Pemasangan lambat Pemasangan sedang Pemasangan sangat Cepat

Difference waves & Installation

IN FACTORY Project location MOBILE SYSTEM
12m max length according to ability trucks The length is not limited The length is not limited
Risk of vehicle dented up and down there there is no there is no
The risk of fracture was increased to gording time there there is no
Risk due to rust buildup projected Risk due to rust buildup projected There is no risk of rust
because dew / rainwater because dew / rainwater due to accumulation / Original Quality
Boros 20cm for splicing There is no connection There is no connection
Risk of leak and rust There is no risk of leaking There is no risk of leaking
because there grafting due to overlap (no connection) due to overlap (no connection)
Installation is slow Installation was Very Fast Installation
UNLIMITED ROOFING LENGTH

LONG SPAN
BUILDING SPECIALIST
 JACKROOF & NOK CRIMPING

CONVENTIONAL/ KEKURANGAN :
- NOK, ROOF AND LISTPLANK DISADVANTAGES:
- MANY CONNECTIONS NOK
- RISK BOCOR / tampias LISTPLANK
- RUST HIGH RISK - NOK,ATAP DAN LISTPLANK
- WASTES overlap
ATAP - BANYAK SAMBUNGAN
- RESIKO BOCOR/TAMPIAS
- RESIKO KARAT TINGGI
- BOROS OVERLAP

JACKROOF KELEBIHAN :
STRENGTHS:

- NOK,ATAP DAN LISTPLANK

- NOK, ROOF AND LISTPLANK
JADI 1
CONTINUOUS ROOF7RIDGE CAP
- TANPA SAMBUNGAN
- NO CONNECTION
- TANPA RESIKO BOCOR/TAMPIAS
- NO RISK BOCOR / tampias
- TANPA RESIKO KARAT
- NO RISK RUST
- TIDAK BOROS OVERLAP
- NO WASTES overlap

KONVENSIONAL / MODEL KUNO KEKURANGAN :

CONVENTIONAL / OLD MODEL DISADVANTAGES:
/
HARUS PANJANG
DAN BOROS BAHAN
HAVE LONG
MATERIALS AND WASTES
TAMPILAN TIDAK RAPI
NEAT NO DISPLAY
PROFIL NOK TIDAK SESUAI DENGAN PROFIL ATAP RESIKO TAMPIAS
PROFILE NOK NOT IN ACCORDANCE WITH THE ROOF PROFILE RISK LEAK

KELEBIHAN :
NOK CRIMPING STRENGTHS:

SUDUT DI SESUAIKAN
BANGUNAN ANDA (CUSTOMER)
ANGLE ON ADJUSTING BUILDING YOU (CUSTOMER)
RAPI TANPA RESIKO BOCOR
neat without the risk of leaking
LEKUKAN RIGID SESUAI PROFIL
PROFIL NOK SESUAI DENGAN PROFIL ATAP INDENTATION RIGID PROFILE
IN ACCORDANCE
NOK PROFILE PROFILE IN ACCORDANCE WITH THE ROOF
 U 12
U12

24 mm
EFFECTIVE SPAN-DECK SYSTEM
U 12
935 mm
Is a contemporary-looking Trapezoidal profile
which is ideal where a stronger, bolder, more modern corrugated Colours
appearance is required. U 12 is available in an attractive range of colours in
COLOURBOND pre-painted steel and in unpainted ZINCALUME
aluminium /zinc alloy coated steel.
U 12 was originally designed as a strong attractive roofing
ZINCALUME steel provides a minimum of twice the life of conventional
material for industrial and comercial construction- however galvanized steel in the same environments.
has Proved Equally popular for homes and public buildings, Lengths
underlining its versatility and pleasing apperance. Sheets are supplied custom cut.

Tolerances
Lenght: +0mm,-15mm
U 12 combines strength with lightness,rigidity and economy. Width: + 4mm,-4mm

Walking on roofs
Generally, keep your weight evenly distributed over the soles of both
feet to avoid concentrating your weight on either heels or toes. Always
wear smooth soft-soled shoes; avoid ribbed soles that pick up and hold
small stones,swarf and other objects.
Material specifications
Maximum Support Spacings
- ZINCALUME aluminium/ zinc alloy-coated steel Complying with The maximum recommended support spacings are based on testing in
AS-1397-2001 , AZ 150 (150g/ m2 Minimum coating mass); accordance with AS1562.1-1992, As4040. 1-1992 and AS4040.2-1992.

Roof spans consider both resistance to wind pressure and light roof
or traffic (traffic arising from incidental maintenance). Wall spans consider
resistance to wind pressure only.

- Stainless steel standard grade designation is AISI/ASTM

Type 430; UNS No. S43000 Attribute Type Material Standard Title Standard Related Standard
Tolerances for flat rolled
Substrate Cold Rolled Coil AS 1365 steel product JIS G3141
Stainless steel is available in a limited range of colours, and is available
Steel Sheet and Strip ‐ JIS G3321; ASTM
subject to enquiry. Metallic Hot Dip Zinc Coated or A 792 / A 792 M;
The base metal thickness is 0,42 or 0,48 mm. Coating Zinc‐Aluminium AS 1397 Aluminium Zinc Coated. SNI 4096 : 2007
Prefinished / Prepainted
Sheet Metal Product for
The COLOURBOND prepainted steel complies with Interior/Exterior Building
Applications ‐
AS/NZS2728:1997. Paint Performance
Properties Polyester Paint AS 2728 Requirement. ‐

Resin Coating
Passivation Cating
55% Al-Zn
Coating

BMT Steel Substrate :

Cold Roll Coil
TCT (CRC)

55% Al-Zn
Coating
Passivation
Resin Coating
 Crest Fixing For Roof or Walls
U12 OVERLAP WITH EMBOSS SYSTEM
To strengthen the overlap between sheet and avoid leakages.

Valley Fixing For Walls Only Keep the product dry and clear of the ground. If stucked
or bundled product becomes wet, separate it, wipe it with
a clean cloth to dry thoroughly.

Handle materials carefully to avoid damage: don't drag

Crest : 6 fasteners materials over rough surface or each other; don't drag
tools over material; protect from swarf.
Crest : 6 fasteners
Cutting
for cutting thin metal on site, we recommend a circular
saw with a metal-cutting blade because it produces
fewer damaging hot metal particles and leaves less
resultant burr than a carborundum disc.
Adverse conditions
if this product is to be used in marine, severe
Cut materials over the ground and not over other
industrial, or unusually corrosive environment, ask for
materials.
advice from our information line.
Sweep all metallic swarf and other debris from roof areas
Metal & timber compatibility and gutters at the end of each day and at the completion
Lead, copper, bare steel and green ar some of the instalation. Failure to do so can lead to surface
chemically-treated timbers are not compatible with this staining when the metal particles rust.
product, thus don't allow any contact of the product
with those material's, nor discharge of rainwater from Sealed joints
them onto the product. If there are doubts about the for sealed joints use screws or rivets and neutral-cure
compability of products being used, ask for advice silicone sealant branded as suitaable for use with
from our information line. galvanised or ZINCCALUME steel.

Maintenance Non-cyclonic areas

optimum product life will be archive if all external the information in this brochure is suitable for use only in
surface are washed regulary. Areas not cleaned by areas where a tropical cyclone is unlikely to occur as
natural rainfall (such as the tops of walls sheltered by defined in AS 1170.2-2002.
eaves) should be washed down every six months.

Safety, storage and handling

handling safety - U 12 product may be sharp
and heavy

it is recommended that heavy-duty cut resistant gloves

and appropriate manual handling techniques or a lifting
plan be used when handling material.
 MATERIAL SPECIFICATIONS AND ROOF 材質仕様と屋根
SPESIFIKASI BAHAN DAN ATAP
TEBAL : 0,50 mm (TCT) THICKNESS: 0.50 mm (TCT) 厚さ：0.50ミリメートル（TCT）
BAHAN : COLORBOND MATERIALS: COLORBOND 材料：COLORBOND
BLUESCOPE STEEL
PROYEK JUANDA BLUESCOPE STEEL
SYSTEM SPECIFICATIONS システム仕様
ブルースコープスチール
SPESIFIKASI SYSTEM
PROJECT JUANDA TIPE
TYPE: boltless seaming SYSTEM
: BOLTLESS SEAMING SYSTEM(WITHOUT BINDER BOLT WITH Kelim) タイプ：ボルトレスシームシステム
プロジェクトジュアンダ ( TANPA BAUT DENGAN PENGIKAT KELIM )CONNECTORS: STAINLESS STEEL CLIPS （キリムバインダーボルトなし）
KONEKTOR : STAINLESS STEEL KLIP コネクタ：ステンレス製のクリップ
Baut Sistem Seaming
Boltless Seaming System SPESIFIKASI INSULASI SPECIFICATIONS INSULATION 仕様断熱
ボルトレス縫合システム ROCK WOOL: ROCK WOOL: ロックウール：
80 Kg/m3 X 50mm 80 Kg/m3 X 50mm 80 kg/m3とX50ミリメートル
Tipe :U-650 ALUMINIUM FOIL: ALUMINUM FOIL: アルミ箔：
Type: U-650 SINGLE SIDE - DOUBLE LAYER SIDE SINGLE - DOUBLE LAYER 片面 - 二重層
タイプ：U-650 ROOFMESH: Roofmesh: Roofmesh：
GALVANIZED ROOFMESH GALVANIZED Roofmesh 亜鉛めっきRoofmesh

ADVANTAGES
ROOF U-650 Sanko BOLTLESS SEAMING SYSTEM
• The degree of roof slope angle is very small.
• Risk of leak = 0% (zero percent) KEUNGGULAN
ATAP U-650 SANKO
• The strength of Sanko flexure tested in the laboratory in JAPAN,
• Derajat sudut kemiringan atap sangat kecil.
• Power supple 5 x stronger than conventional wave
• The strength of the roof is a rigid entity • Resiko kebocoran = 0% (nol persen)
• The roof system is not at all perforate sheet roof
• Kekuatan daya lentur diuji di laboratorium
• No need merivet at a meeting between the roofing sheets with SANKO di JEPANG,
other roofing sheets, so there will be no holes due to power breakdown
due to rivet aluminum roof itself supple and heavy materials.
• Daya lentur 5 x lebih kuat dibandingkan dengan
• With gording fairly wide range, so reducing the cost of construction.
gelombang konvensional
• For example hangar Soekarno - Hatta Airport Cengkareng Jakarta with
U-650's roof gording distance = 5.00 m up to 5.60 m thickness = 0.70 mm
roofing materials • Kekuatan atap merupakan suatu kesatuan yang
rigid
• Atap sistem ini sama sekali tidak melubangi
lembaran atap
• Tidak perlu merivet pada pertemuan antar
lembaran atap dengan lembar atap lainnya,
sehingga tidak akan terjadi lubang-lubang akibat
putusnya rivet aluminium dikarenakan daya
lentur atap itu sendiri dan berat bahan.
• Dengan jarak gording yang cukup lebar, maka
mengurangi biaya konstruksi.
• Sebagai contoh hanggar Soekarno -
Hatta Airport Cengkareng Jakarta dengan atap
U-650 ini jarak gording = 5,00m s.d 5,60 m
ketebalan bahan atap = 0,70 mm
 MODEL ATAP :U650 SANKO/ROOF MODEL: U650 Sanko/ルーフモデル：U650サンコー
Boltless SYSTEM seaming/BOLTLESS SEAMING SYSTEM/ボルトレスシームシステム
SISTEM PENGERJAAN/ WORK SYSTEM/ワークシステム:DILAPANGAN/ON SITE FORMING/サイト上
FORMING
PANJANG ATAP/LONG ROOF/ロングルーフ:TIDAK TERBATAS / DISESUAIKAN DENGAN KEBUTUHAN PROYEK/
NOT LIMITED / ADJUSTED WITH PROJECT NEEDS
限定されるものではない/プロジェクトのニーズで調整 U-650
650 mm
26 mm
KETERANGAN PRODUK : 16 mm 72,5mm

BOLTLESS = TANPA BAUT 100 mm

Sambungan antar lembaran atap

110 mm 210 mm 110 mm
sama sekali tidak menggunakan baut,
dan tidak melubangi lembaran atap
Joints between roof sheets
melainkan menggunakan seaming machine did not use bolts,
MODEL U650 BOLTLESS SEAMING SYSTEM and not perforate sheet roof
but using seaming machine
Merupakan atap dan system yang khusus SYSTEM MODEL U650
diciptakan oleh SANKO METAL INDUSTRI CO, LTD,‐ JEPANG, boltless seaming
untuk METAL WORKS. And the roof is a system that is
specially created by Sanko 83
METAL INDUSTRY CO., LTD, -
JAPAN,

26
05 01 for METAL WORKS
06

07

02 CLIP BAUT
08 STAINLESS CONECTOR

03

04

KETERANGAN
01 Wuwung/Nok (Rridge Converting) 01 Wuwung / Nok (Rridge Converting) 01

02 Penutup Akhir bag. atas (Upper end Closer) 02 Final cover bag. above (Upper end Closer) 02
UTOMODECK roof coverings U-650
03 Penutup atap UTOMODECK U-650 03 (shell roof utomodeck U-650 boltless)
03
(shell roof utomodeck U-650 Boltless)
04 Cover the end of the bag. below (Lower end Closer)
04 Penutup akhir bag. bawah (Lower end Closer) 04
05 Bolt (Bolt)
05 Baut (Bolt) 05
06 Clips Stainless Steel (Stainless Clip)
06 Klip Stainless Steel (Stainless Clip) 06
07 Roof Connector (Connector Roof)
07 Konektor Atap (Roof Connector) 07
08
Gording / purlin
08 Gording/purlin 08

BEBAN IJIN SANKO U-650 (BENTANG MENERUS)

PERMIT LOADS Sanko U-650 (LANDSCAPE CONTINUOUS)

0,45 0,55 0,65 0,75

600
550
500
450
PERMIT LOADS

400
350
300
250
200
150
100
50
0

0 1 2 3 4 5 6
 UTOMOZIP

UTOMOZIP
Lebar Tinggi
efektif
standing seam UTOMOZIP
400 mm 65 mm

65 mm 578 mm 65 mm

678 mm 65 mm
Lebar efektif

Utomozip adalah prole terbaru dari

produk Utomodeck, yang merupakan Keunggulan
prole dengan sistem seaming, sistem atap
ini digunakan sebagai atap luar dengan 1. Tidak terlihatnya ada pengait drilling/
baut pada permukaan atap.
insulasi yang mampu menahan panas dan 2. Dengan sistem klip seaming ini memberikan
kebisingan suara. tampilan atap yang lebih rapi.
Selain itu, Utomozip dapat dibentuk 3. Tersedia lembar meruncing dan
menjadi lembaran lurus, lembaran melengkung untuk memenuhi
melengkung, cembung untuk memenuhi kriteria desain yang paling menantang.
geometri atap. Dengan demikian, 4. Bisa diroll atau dibentuk di lokasi untuk
Utomozip bisa memberikan ispirasi bagi menghindari ujung tumpang tindih dan
untuk mencapai bentuk yang di inginkan
arsitek, insinyur dan kontraktor untuk sesuai dengan persyaratan proyek.
menjadi pilihan utama solusi atap. 5. Tersedia dengan berbagai macam bahan,
Utomozip memiliki bentuk dan seperti Tembaga,Aluminium,Stainless steel,
paling beragam dan berbagai tambahan dan Zincaluminium.
fungsi terus memberikan solusi atap yang 6. Dengan prol yang tinggi dapat melancarkan
terbaik untuk para costumer. aliran air sehingga tidak terjadi genangan.
 UTOMOZIP
standing seam UTOMOZIP Seamer Elektrik Seamer

Clip Height C1 C2
Name
(mm) (mm) (mm)

U85 85mm 20 25
U115 115mm 50 55
U140 140mm 75 80

2
3
1

1 Memasang klip 2 Memasang Prole 3 Kuncian Prol

Utomozip diletakkan Utomozip ke dalam Utomozip
ke purlins dengan klip dengan aturan Terpasang dengan
benar. Perhatikan saling berkait dan kuncian yang
ke arah yang benar. mengunci. saling berurutan

LURUS KERUCUT LENGKUNG

STRAIGHT TAPERED CURVE
 26,5 mm

13,5 mm

step 1

188,5 mm
35,5 mm

U-672
step 2

Beban ijin U-672 (Bentang menerus)

180

160
step 3
140

120

100

80
step 4
60

40

20

0
ATAP U672‐Boltless Clip
System
ROOF U672‐Boltless
Diproduksi secara
Clip System
berkesinambungan
produced continuously
mengikuti panjang yang
without joint from the
dipesan, sehingga atap
highest position (ridge
bisa dipesan, dengan
cap) to the lowest
ukuran panjang tanpa
position (gutter). But in
sambungan, mulai dari
case of difficultly of
bubungan atap sampai
transportation, the
cucuran atap/talang. Akan
roof sheet is divided
tetapi mengingat kesulitan
into two or three
didalam pengangkutan
pieces, except by
Hasil Tarik U-672 untuk ukuran yang lebih
Ukuran Benda Uji Luas
Tegangan ulur
Kekuatan Tarik
panjang maka biasanya
(leleh ) Regangan
No Penampang
Lebar /
mm
Tebal /
mm
2mm kg 2 kg/mm PSI 2Kg kg/mm PSI
(%)
atap dibagi dua sampai
1. 39.70
2. 40.00
0.50
0.50
19.35
20.00
12.68 65.16
12.95 66.05
-
-
13.15 67.57
13.25 67.58
-
-
3.92
3.97 tiga sambungan.
3. 39.70 0.50 19.35 12.35 63.46 - 13.00 66.80 - 4.90
4. 40.00 0.45 18.00 10.75 60.92 - 11.40 64.60 - 3.06 Terkecuali dengan mobile
5. 41.00 0.45 18.45 9.20 50.86 - 9.60 53.07 - 3.85
6. 41.00
7. 39.90
0.45
0.40
18.45
15.90
11.00 60.81
9.90 63.27
-
-
11.50 63.58
10.25 65.51
-
-
3.41
3.07
sy ste m ata u o n s i te
8. 39.10
9. 16.30
0.42
0.41
16.42
14.88
9.95
6.75
61.81
46.27
-
-
10.45 64.91
7.10 48.67
-
-
2.50
3.30 forming.
 CORRUGATED METAL ROOFING - CLADDING

U500 180 mm
Boltless Seaming System 500 mm

U 600
Boltless Seaming System 600 mm
120 mm

U 380
Boltless Seaming System 380 mm/405 mm
127 mm

U650
Boltless Seaming System 650 mm
100 mm

SANKO

U672
Boltless Klip-Locking System 672 mm
41 mm

U472 720 mm
40 mm

U472A 720 mm
40 mm

U573 730 mm
30 mm

BOLT
U573 PE 30 mm
SYSTEM
ROOFING/
U5 730 mm
30 mm
CLADDING

U375 750 mm
25 mm
ATAP
DENGAN
U575 750 mm
25 mm
SISTEM
BAUT
U575 PE 25 mm

U575 A 750 mm
25 mm

U575 B 750 mm
25 mm

ULT7 890 mm
38 mm
CORRUGATED METAL ROOFING - CLADDING

U1013 1013 mm
28 mm

U1040 1040 mm
25 mm

PU 1040 1040 mm
45 mm

Bulat ATAP/
18 mm
Besar 780/830 mm DINDING

Bulat 7 mm
Kecil 810 mm
ROOF /
WALL
U9 660 mm
25 mm

U968 680 mm
25 mm

U10 765 mm
25 mm

U12 935 mm
23 mm

RD 725 mm 15 mm

U7 760 mm 15 mm

A B
UCL 95 mm 91 mm
12 mm

C 95 mm
12 mm
DINDING
PLAFON/
D 12 mm
LISPLANK
91 mm

E 120 mm 12 mm WALL
CEILING /
A 720 mm 15 mm Lisplank

B 360 mm
10 mm

C 370 mm
10 mm

KP / H 235 mm 215 mm
15 mm
 CORRUGATED METAL ROOFING - CLADDING

CORDEK L A N TA I
54 mm FLOOR
STRUKTURAL DECKING 600 mm
フロア

SUPER CORDECK 51 mm
Seaming interlock system 1005 mm

ALTRA

ALTRA -300 100 mm

(ATAP
TANPA
RANGKA)
FRAMELESS SYSTEM 300 mm
(ROOF
WITHOUT
ORDER)

ALTRA -380 127 mm

Frameless system 380 mm

U 310 310 mm
ATAP/
DINDING
BOLTLESS CONCEALED SYSTEM
ROOF /
WALL

U 230
BOLTLESS CONCEALED SYSTEM 230 mm

GUTTER 118 mm RESIDENTIAL

GUTTER
127 mm INDUSTRIAL
GUTTER
TANPA SAMBUNGAN 380 mm
98 mm

USS-RESIDENTIAL UDS-UTOMO
STANDING
SEAM DOUBLE SEAM 25 mm

UTOMO 25 mm

SHINGLES
UTOMO ATAP DOME
ROOF DOME
BUTTON ROLL
ATAP KERUCUT
UTOMO ROOF CONE
66 mm
ZIP DECK 270 mm-600 mm

RANGKA
HOLO HOLO
HOLO Framework
6 cm

7 cm

46 4 cm 46 57 5 cm
57

RENG RENG RANGKA

Framework
RENG
90o
o
90

90o
o
90

ROYAL EKONOMI
 METAL WORKS
www.utomodeck.com