Scribd
Upload
6 views3 pages

Control Systems - Introduction

Control system

Uploaded by

tappalfahim05
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
Download as pdf or txt
6 views3 pages

Control Systems - Introduction

Control system

Uploaded by

tappalfahim05
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
Download as pdf or txt
Download as pdf or txt
You are on page 1/ 3

Control Systems - Introduction

A control system is a system, which provides the desired response by controlling the output. The
following figure shows the simple block diagram of a control system.

Here, the control system is represented by a single block. Since, the output is controlled by varying
input, the control system got this name. We will vary this input with some mechanism. In the next
section on open loop and closed loop control systems, we will study in detail about the blocks inside
the control system and how to vary this input in order to get the desired response.

Examples − Traffic lights control system, washing machine

Traffic lights control system is an example of control system. Here, a sequence of input signal is applied
to this control system and the output is one of the three lights that will be on for some duration of time.
During this time, the other two lights will be off. Based on the traffic study at a particular junction, the on
and off times of the lights can be determined. Accordingly, the input signal controls the output. So, the
traffic lights control system operates on time basis.

Classification of Control Systems


Based on some parameters, we can classify the control systems into the following ways.

Continuous time and Discrete-time Control Systems

Control Systems can be classified as continuous time control systems and discrete time
control systems based on the type of the signal used.

In continuous time control systems, all the signals are continuous in time. But, in discrete time
control systems, there exists one or more discrete time signals.

SISO and MIMO Control Systems


Control Systems can be classified as SISO control systems and MIMO control systems based
on the number of inputs and outputs present.

SISO (Single Input and Single Output) control systems have one input and one output. Whereas,
MIMO (Multiple Inputs and Multiple Outputs) control systems have more than one input and
more than one output.

Open Loop and Closed Loop Control Systems

Control Systems can be classified as open loop control systems and closed loop control systems based
on the feedback path.

In open loop control systems, output is not fed-back to the input. So, the control action is independent
of the desired output.

The following figure shows the block diagram of the open loop control system.

Here, an input is applied to a controller and it produces an actuating signal or controlling signal. This
signal is given as an input to a plant or process which is to be controlled. So, the plant produces an
output, which is controlled. The traffic lights control system which we discussed earlier is an example of
an open loop control system.

In closed loop control systems, output is fed back to the input. So, the control action is dependent on
the desired output.

The following figure shows the block diagram of negative feedback closed loop control system.
The error detector produces an error signal, which is the difference between the input and the feedback
signal. This feedback signal is obtained from the block (feedback elements) by considering the output
of the overall system as an input to this block. Instead of the direct input, the error signal is applied as
an input to a controller.

So, the controller produces an actuating signal which controls the plant. In this combination, the output
of the control system is adjusted automatically till we get the desired response. Hence, the closed loop
control systems are also called the automatic control systems. Traffic lights control system having
sensor at the input is an example of a closed loop control system.

The differences between the open loop and the closed loop control systems are mentioned in the
following table.

Open Loop Control Systems Closed Loop Control Systems

Control action is independent of the desired Control action is dependent of the desired
output. output.

Feedback path is not present. Feedback path is present.

These are also called as non-feedback control These are also called as feedback control
systems. systems.

Easy to design. Difficult to design.

These are economical. These are costlier.

Inaccurate. Accurate.

You might also like