Lab - Attacking a mySQL Database

Objectives
In this lab, you will view a PCAP file from a previous attack against a SQL database.
Part 1: Open Wireshark and load the PCAP file.
Part 2: View the SQL Injection Attack.
Part 3: The SQL Injection Attack continues…
Part 4: The SQL Injection Attack provides system information.
Part 5: The SQL Injection Attack and Table Information
Part 6: The SQL Injection Attack Concludes.

Background / Scenario
SQL injection attacks allow malicious hackers to type SQL statements in a web site and receive a response
from the database. This allows attackers to tamper with current data in the database, spoof identities, and
miscellaneous mischief.
A PCAP file has been created for you to view a previous attack against a SQL database. In this lab, you will
view the SQL database attacks and answer the questions.

Required Resources
• CyberOps Workstation virtual machine

Instructions
You will use Wireshark, a common network packet analyzer, to analyze network traffic. After starting
Wireshark, you will open a previously saved network capture and view a step by step SQL injection attack
against a SQL database.

Part 1: Open Wireshark and load the PCAP file.

The Wireshark application can be opened using a variety of methods on a Linux workstation.
a. Start the CyberOps Workstation VM.
b. Click Applications > CyberOPS > Wireshark on the desktop and browse to the Wireshark application.
c. In the Wireshark application, click Open in the middle of the application under Files.
d. Browse through the /home/analyst/ directory and search for lab.support.files. In the lab.support.files
directory and open the SQL_Lab.pcap file.

© 2018 - 2024 Cisco and/or its affiliates. All rights reserved. Cisco Public Page 1 of 14 www.netacad.com
Lab - Attacking a mySQL Database

e. The PCAP file opens within Wireshark and displays the captured network traffic. This capture file extends
over an 8-minute (441 second) period, the duration of this SQL injection attack.

Question:

What are the two IP addresses involved in this SQL injection attack based on the information displayed?
Type your answers here.

© 2018 - 2024 Cisco and/or its affiliates. All rights reserved. Cisco Public Page 2 of 14 www.netacad.com
Lab - Attacking a mySQL Database

10.0.2.4 and 10.0.2.15

Part 2: View the SQL Injection Attack.

In this step, you will be viewing the beginning of an attack.
a. Within the Wireshark capture, right-click line 13 and select Follow > HTTP Stream. Line 13 was chosen
because it is a GET HTTP request. This will be very helpful in following the data stream as the application
layers sees it and leads up to the query testing for the SQL injection.

The source traffic is shown in red. The source has sent a GET request to host 10.0.2.15. In blue, the
destination device is responding back to the source.

© 2018 - 2024 Cisco and/or its affiliates. All rights reserved. Cisco Public Page 3 of 14 www.netacad.com
Lab - Attacking a mySQL Database

b. In the Find field, enter 1=1. Click Find Next.

c. The attacker has entered a query (1=1) into a UserID search box on the target 10.0.2.15 to see if the
application is vulnerable to SQL injection. Instead of the application responding with a login failure
message, it responded with a record from a database. The attacker has verified they can input an SQL
command and the database will respond. The search string 1=1 creates an SQL statement that will be
always true. In the example, it does not matter what is entered into the field, it will always be true.

© 2018 - 2024 Cisco and/or its affiliates. All rights reserved. Cisco Public Page 4 of 14 www.netacad.com
Lab - Attacking a mySQL Database

d. Close the Follow HTTP Stream window.

e. Click Clear display filter to display the entire Wireshark conversation.

© 2018 - 2024 Cisco and/or its affiliates. All rights reserved. Cisco Public Page 5 of 14 www.netacad.com
Lab - Attacking a mySQL Database

Part 3: The SQL Injection Attack continues...

In this step, you will be viewing the continuation of an attack.
a. Within the Wireshark capture, right-click line 19, and click Follow > HTTP Stream.
b. In the Find field, enter 1=1. Click Find Next.

© 2018 - 2024 Cisco and/or its affiliates. All rights reserved. Cisco Public Page 6 of 14 www.netacad.com
Lab - Attacking a mySQL Database

c. The attacker has entered a query (1’ or 1=1 union select database(), user()#) into a UserID search box on
the target 10.0.2.15. Instead of the application responding with a login failure message, it responded with
the following information:

© 2018 - 2024 Cisco and/or its affiliates. All rights reserved. Cisco Public Page 7 of 14 www.netacad.com
Lab - Attacking a mySQL Database

The database name is dvwa and the database user is root@localhost. There are also multiple user
accounts being displayed.
d. Close the Follow HTTP Stream window.
e. Click Clear display filter to display the entire Wireshark conversation.

Part 4: The SQL Injection Attack provides system information.

The attacker continues and starts targeting more specific information.
a. Within the Wireshark capture, right-click line 22 and select Follow > HTTP Stream. In red, the source
traffic is shown and is sending the GET request to host 10.0.2.15. In blue, the destination device is
responding back to the source.
b. In the Find field, enter 1=1. Click Find Next.

© 2018 - 2024 Cisco and/or its affiliates. All rights reserved. Cisco Public Page 8 of 14 www.netacad.com
Lab - Attacking a mySQL Database

c. The attacker has entered a query (1’ or 1=1 union select null, version ()#) into a UserID search box on the
target 10.0.2.15 to locate the version identifier. Notice how the version identifier is at the end of the output
right before the </pre>.</div> closing HTML code.

© 2018 - 2024 Cisco and/or its affiliates. All rights reserved. Cisco Public Page 9 of 14 www.netacad.com
Lab - Attacking a mySQL Database

Question:

What is the version?

MySQL 5.7.12-0
ype your answers here.
d. Close the Follow HTTP Stream window.
e. Click Clear display filter to display the entire Wireshark conversation.

Part 5: The SQL Injection Attack and Table Information.

The attacker knows that there is a large number of SQL tables that are full of information. The attacker
attempts to find them.
a. Within the Wireshark capture, right-click on line 25 and select Follow > HTTP Stream. The source is
shown in red. It has sent a GET request to host 10.0.2.15. In blue, the destination device is responding
back to the source.
b. In the Find field, enter users. Click Find Next.
c. The attacker has entered a query (1’or 1=1 union select null, table_name from
information_schema.tables#) into a UserID search box on the target 10.0.2.15 to view all the tables in the

© 2018 - 2024 Cisco and/or its affiliates. All rights reserved. Cisco Public Page 10 of 14 www.netacad.com
Lab - Attacking a mySQL Database

database. This provides a huge output of many tables, as the attacker specified “null” without any further
specifications.

© 2018 - 2024 Cisco and/or its affiliates. All rights reserved. Cisco Public Page 11 of 14 www.netacad.com
Lab - Attacking a mySQL Database

Question:

What would the modified command of (1' OR 1=1 UNION SELECT null, column_name FROM
INFORMATION_SCHEMA.columns WHERE table_name='users') do for the attacker?
The Database responded with shorter output
ype your answers here.

d. Close the Follow HTTP Stream window.

e. Click Clear display filter to display the entire Wireshark conversation.

Part 6: The SQL Injection Attack Concludes.

The attack ends with the best prize of all; password hashes.
a. Within the Wireshark capture, right-click line 28 and select Follow > HTTP Stream. The source is shown
in red. It has sent a GET request to host 10.0.2.15. In blue, the destination device is responding back to
the source.
b. Click Find and type in 1=1. Search for this entry. When the text is located, click Cancel in the Find text
search box.
The attacker has entered a query (1’or 1=1 union select user, password from users#) into a UserID
search box on the target 10.0.2.15 to pull usernames and password hashes!

© 2018 - 2024 Cisco and/or its affiliates. All rights reserved. Cisco Public Page 12 of 14 www.netacad.com
Lab - Attacking a mySQL Database

Question:

Which user has the password hash of 8d3533d75ae2c3966d7e0d4fcc69216b?

1337
Type your answers here.
c. Using a website such as https://crackstation.net/, copy the password hash into the password hash
cracker and get cracking.
Question:

What is the plain-text password?

charley
Type your answers here.
d. Close the Follow HTTP Stream window. Close any open windows.

Reflection Questions
1. What is the risk of having platforms use the SQL langauge?
i) The Web sites are databased and also using the SQL, the SQL injection attack is up for the attackers
Type your answers here.

© 2018 - 2024 Cisco and/or its affiliates. All rights reserved. Cisco Public Page 13 of 14 www.netacad.com
Lab - Attacking a mySQL Database

2. Browse the internet and perform a search on “prevent SQL injection attacks”. What are 2 methods or steps
that can be taken to prevent SQL injection attacks?
Filter database inputs: Detect and filter out malicious code from user inputs.
Restrict database code: Prevent unintended database queries and exploration by limiting database
procedures and code.

Reference:
https://www.esecurityplanet.com/threats/how-to-prevent-sql-injection-attacks/

Type your answers here.

End of document

© 2018 - 2024 Cisco and/or its affiliates. All rights reserved. Cisco Public Page 14 of 14 www.netacad.com