FINAL TIME TABLE

NATIONAL DIPLOMA (TECHNICAL) NOV/DEC 2024 EXAMINATIONS

GENERAL INSTRUCTIONS
1. The time allowed for each paper is shown against the name of the paper. NO EXTRA TIME
IS TO BE ALLOWED. In case of any discrepancy, the time shown on the question paper must
be taken as correct.
2. It must be observed that the morning session begins at 09:00 a.m. and afternoon session at 02:00
p.m.
3. All candidates must present themselves with both examination/registration and Identity cards before
entering the examination hall and during the examinations.
4. Briefing the candidates by the Heads of Centres on the conduct of the Examinations will be done
on Friday, 29th November 2024 and MUST be attended by all candidates at their respective
Centres of registration. Candidates MUST sign on the attendance register which must be returned
to UBTEB Secretariat immediately after the Examinations.
DAY & DATE SESSION PAPER CODE AND NAME DURATION
FRIDAY Morning Briefing of candidates by Heads of Centres on directions 3 hours
th
29 November 2024 09:00 a.m. and cautions about examinations
MONDAY Morning DTCE111 Construction Technology I 3 hours
nd
2 December 2024 09:00 a.m. TDCE111 Construction Technology I 3 hours
DTME111 Production Technology I 3 hours
TDME111 Production Technology I 3 hours
DTTE111 Production Technology I 3 hours
TDCR111 Ceramics Technology I 3 hours
TDAE111 Automotive Engine Systems 3 hours
TDTE112 Analogue Electronic Devices and Circuits I 3 hours
DMP1101 Basics of Media and Print Processes 3 hours
VDFD115 Fashion and Basic Design 3 hours

1
 Afternoon DTCE213 Engineering Surveying II 3 hours
02:00 p.m. TDCE214 Engineering Surveying II 3 hours
DTEE212 Electrical Power II 3 hours
TDEE212 Electrical Power II 3 hours
DTME213 Fluid Mechanics 3 hours
TDME213 Fluid Mechanics 3 hours
TDIT216 Research Methodology 3 hours
TDCR211 Ceramics Technology III 3 hours
TDTE211 Digital Electronic Devices and Circuits II 3 hours
TDAE213 Automatic Power Transmission Systems 3 hours
VDID217 Building Technology 3 hours
VDFD217 Measurements and Estimation 3 hours

DAY & DATE SESSION PAPER CODE AND NAME DURATION

Afternoon TDBE2101 Biochemistry and Instrumental Analysis 3 hours
02:00 p.m. DMP2101 Assembly and Printing Form Production II 3 hours
NDLT211 HSE & Waste Management 3 hours
TUESDAY Morning DTCH111 Communication Skills 3 hours
rd
3 December 2024 09:00 a.m. VDID115 Communication Skills 3 hours
VDFD117 Communication Skills 3 hours
TDTE115 Communication Skills 3 hours
TDCH111 Communication Skills and Humanities 3 hours
NDHM111 Communication Skills and Humanities 3 hours
TDBE1101 Engineering Communication Skills 3 hours
DMP1108 Communication Skills 3 hours
Afternoon DTME216 Basics of Oil and Gas Systems 3 hours
02:00 p.m. TDEE217 Electrical Installation Technology 3 hours
TDTE212 Medical Electronic Devices and Circuits 3 hours
VDID215 Computer Aided Design – Sweet Home 3 hours
VDFD216 Industrial Manufacturing Techniques 3 hours

WEDNESDAY Morning DTIT117 Computer Applications 2 hours

th
4 December 2024 09:00 a.m. TDIT117 Computer Applications 2 hours
VDID116 Computer Applications 2 hours
VDFD118 Computer Applications 2 hours
NDIT111 Computer Applications 2 hours
TDBE1104 Computer Applications (Part I) 2 hours
DMP1107 Computer Applications 2 hours
TDIT115 Internet Technologies and Web Design 3 hours

2
 Afternoon DTIT117 Computer Applications Continues
02:00 p.m. TDIT117 Computer Applications Continues
VDID116 Computer Applications End
VDFD118 Computer Applications End
NDIT111 Computer Applications End
TDBE1104 Computer Applications (Part II) 3 hours

THURSDAY Morning DTIT117 Computer Applications Continues

th
5 December 2024 09:00 a.m. TDIT117 Computer Applications Continues
DTAR111 Architectural Studio I 6 hours
TDAR111 Architectural Studio I 6 hours
TDAE113 Automotive Engine and power Transmission 6 hours
systems Practice
VDID114 Introduction to Landscape Design 6 hours
VDFD112 Introduction to Pattern Making 4 hours
DMP1104 Image Processing I 3 hours
TDBE1102 Electrical Engineering Science (Part I) 2 hours

DAY & DATE SESSION PAPER CODE AND NAME DURATION

Afternoon DTIT117 Computer Applications End
02:00 p.m. TDIT117 Computer Applications End
DTEE111 Electrical Engineering Science I 3 hours
TDEE111 Electrical Engineering Science I 3 hours
TDTE113 Electrical Engineering Science I 3 hours
TDBE1102 Electrical Engineering Science (Part II) 3 hours
FRIDAY Morning DTEM111 Engineering Mathematics I 3 hours
th
6 December 2024 09:00 a.m. TDEM111 Engineering Mathematics I 3 hours
TDIT112 Computational Mathematics 3 hours
VDID112 Colour Theory and Science 6 hours
VDFD113 Basic Sewing Processes 6 hours
NDLT111 Applied Mathematics I 3 hours
TDBE1106 Engineering Mathematics 3 hours
DMP1105 Printing Mathematics I 3 hours
Afternoon DTEE112 Electrical Installation Technology 3 hours
02:00 p.m. TDEE112 Electrical Installation Technology 3 hours
TDAE112 Power Transmission Systems 3 hours
TDCR112 Ceramics Chemistry I 3 hours
MONDAY Morning DTEM211 Engineering Mathematics III 3 hours
th
9 December 2024 09:00 a.m. TDEM211 Engineering Mathematics III 3 hours
TDIT214 Object-Oriented Programming with Java 4 hours
TDBE2102 Biomedical Instrumentation (Part I) 2 hours
VDID212 Colour Preparation and Application 6 hours
DMP2108 Cost Accounting 3 hours

3
 Afternoon TDAE216 Safety, Health, Environment and Transport 3 hours
02:00 p.m. Management
TDCR213 Ceramics Calculations 3 hours
TDRA212 Heating and Ventilation Systems 3 hours
TDBE2102 Biomedical Instrumentation (Part II) 3 hours
TUESDAY Morning DTWE211 Geology and Soils 3 hours
th
10 December 2024 09:00 a.m. TDWE211 Geology and Soils 3 hours
DTAR213 Building Laws and Regulations 3 hours
TDAR213 Building Laws and Regulations 3 hours
DTME214 Thermodynamics 3 hours
TDME214 Thermodynamics 3 hours
TDAE214 Intake, Exhaust and Environmental 3 hours
Management Systems
TDTE213 Radio and Industrial Electronic Devices and 3 hours
Circuits
VDFD111 Fashion Drawing 3 hours
TDIT215 Network and Systems Administration 3 hours
TDTE216 Computer Programming (Part I) 2 hours
TDBE1105 Applied Physics for Biomedical Engineering 3 hours
DAY & DATE SESSION PAPER CODE AND NAME DURATION
Afternoon DTME217 Fabrication and Welding Technology 3 hours
02:00 p.m. VDID216 Interior Graphic Design – Adobe Fireworks 3 hours
TDBE2105 Biomedical Engineering Workshop Practice 2 hours
(Part I)
DMP2106 Printing Technology II 3 hours
NDLT217 Leather Production II 3 hours
TDTE216 Computer Programming (Part II) 3 hours

WEDNESDAY Morning DTCE211 Road Construction and Plants 3 hours

th
11 December 2024 09:00 a.m. TDCE211 Road Construction and Plants 3 hours
DTWE212 Hydrology, Water Supply and Irrigation 3 hours
TDWE212 Hydrology, Water Supply and Irrigation 3 hours
DTAR212 Building Science 3 hours
TDAR212 Building Science 3 hours
TDIT212 Database Planning, Design and 4 hours
Management II
VDFD214 Fundamentals of Decorative Design (Part I) 4 hours
NDLT216 Leather Goods Production 6 hours
TDBE2105 Biomedical Engineering Workshop Practice 3 hours
(Part II)

4
 Afternoon DTEE211 Electrical Engineering Science III 3 hours
02:00p.m. TDEE211 Electrical Engineering Science III 3 hours
DTME218 Applied Thermodynamics 3 hours
VDFD214 Fundamentals of Decorative Design (Part II) 2 hours

THURSDAY Morning DTME113 Engineering Drawing 3 hours

th
12 December 2024 09:00 a.m. TDME114 Engineering Drawing 3 hours
DTTE113 Engineering Drawing 3 hours
TDIT111 Introduction to Information and 3 hours
Communication Technology
VDID111 Introduction to Interior Design 6 hours
VDFD116 Introduction to Textile Science (Part I) 4 hours
TDBE1107 Engineering Drawing Skills 3 hours
DMP1102 Layout Design I 3 hours
NDLT112 Hides and Skins Technology (Paper II) 4 hours

Afternoon DTME114 Health, Safety and Environment 3 hours

02:00 p.m. DTTE114 Health, Safety and Environment 3 hours
VDFD116 Introduction to Textile Science (Part II) 2 hours
TDBE1103 Biomedical Anatomy and Physiology 3 hours
DMP1106 Printing Material Science I 3 hours
NDLT112 Hides and Skins Technology (Paper I) 3 hours

DAY & DATE SESSION PAPER CODE AND NAME DURATION

FRIDAY Morning DTME112 Mechanical Engineering Science I 3 hours
13th December 2024 09:00 a.m. TDME113 Mechanical Engineering Science I 3 hours
DTTE112 Mechanical Engineering Science I 3 hours
VDID214 Interior Draughtsmanship and Drawing 6 hours
VDFD215 Customized Garment Making 6 hours
TDTE214 Electronic Instruments and Measurement 3 hours
TDBE2106 Digital Communication 3 hours
TDAE211 SI Engine and Electronic Controlled Fuel 3 hours
Systems
DMP2105 Electronic Data Processing II 3 hours
Afternoon DTCE113 Engineering Surveying I 3 hours
02:00 p.m. TDCE113 Engineering Surveying I 3 hours
TDIT114 Computer Architecture 3 hours
TDTE111 Electronic Communication Systems I 3 hours
NDLT113 Inorganic and Organic Chemistry 3 hours

5
MONDAY Morning DTAR211 Computer Aided Design 3 hours
th
16 December 2024 09:00 a.m. TDAR211 Computer Aided Design 3 hours
DTME211 Computer Aided Design 3 hours
TDME211 Computer Aided Design 3 hours
DTEE213 Computer Aided Design 3 hours
VDID213 Landscape Design and Development 6 hours
VDFD212 Industrial Pattern Making 4 hours
TDTE215 Maintenance and Repair of Television Sets 2 hours
and Cell Phones (Part I)
TDBE2107 Bio control Systems 3 hours
DMP2103 Vector Design I 3 hours
NDLT213 Quality Control 3 hours
Afternoon DTAR211 Computer Aided Design 3 hours
02:00 p.m. TDAR211 Computer Aided Design 3 hours
DTME211 Computer Aided Design 3 hours
TDME211 Computer Aided Design 3 hours
DTEE213 Computer Aided Design 3 hours
TDEE215 Principles of Measurements 3 hours
TDTE215 Maintenance and Repair of Television Sets 3 hours
and Cell Phones (Part II)
TUESDAY Morning DTAR211 Computer Aided Design 3 hours
th
17 December 2024 09:00 a.m. TDAR211 Computer Aided Design 3 hours
DTME211 Computer Aided Design 3 hours
DTEE213 Computer Aided Design 3 hours
TDIT211 Data Communications and Networks 3 hours
TDTE217 Programmable Logic Controllers (Part I) 2 hours
VDFD213 Garment Construction and Modelling 6 hours
DMP2104 Image Processing III 3 hours
DAY & DATE SESSION PAPER CODE AND NAME DURATION
Morning NDLT215 Footwear production I 6 hours
09:00 a.m. TDAE215 Frame, SI Engine, Electronic Controlled 3 hours
Fuel and Automatic Power Transmission
Practice
Afternoon DTAR211 Computer Aided Design End
02:00 p.m. TDAR211 Computer Aided Design End
DTME211 Computer Aided Design End
DTEE213 Computer Aided Design End
TDTE217 Programmable Logic Controllers (Part II) 3 hours

6
WEDNESDAY Morning DTCE112 Engineering Materials and Concrete 3 hours
th
18 December 2024 09:00 a.m. Technology
TDCE112 Engineering Materials and Concrete 3 hours
Technology
TDME112 Engineering Materials 3 hours
TDIT113 Computer Applications 3 hours
VDID113 Introduction to Interior Draughtsmanship 6 hours
VDFD114 Needle Craft Practice 6 hours
DMP1103 Electronic Data Processing I 3 hours
TDTE114 Electrical Installation Technology (Part I) 2 hours
Afternoon DTME212 Automotive Engine Technology I 3 hours
02:00 p.m. TDME212 Automotive Engine Technology II 3 hours
DTEE214 Fundamentals of Communication Systems 3 hours
TDEE214 Fundamentals of Communication Systems 3 hours
TDCE213 Civil Engineering Drawing 3 hours
TDWE213 Sanitation and Drainage 3 hours
TDAR214 Building Specifications 3 hours
TDRA213 Refrigeration Technology 3 hours
TDCR212 Materials Science II 3 hours
TDTE114 Electrical Installation Technology (Part II) 3 hours
THURSDAY Morning DTCE212 Strength of Materials 3 hours
th
19 December 2024 09:00 a.m. TDCE212 Strength of Materials 3 hours
DTEE215 Electronics II 3 hours
TDEE216 Electronics II 3 hours
DTME215 Power Transmission Systems 3 hours
TDME216 Power Transmission Systems 3 hours
TDCR214 Ceramics Concrete Works 3 hours
TDAE212 Frame Suspension and Steering Systems 3 hours
TDIT213 Operating Systems 3 hours
VDID211 Interior Design and Development 6 hours
VDFD211 Fabric & Pattern Styling 6 hours
TDBE2104 Simulation in life support Devices 3 hours
DMP2102 Layout Design III 3 hours
NDLT212 Tannery Engineering II 3 hours

INSTRUCTIONS TO CANDIDATES
1. Candidates should ease themselves before entering the examination room. No candidate shall be
allowed to leave the examination room before the end of the examination.
2. Candidates should be seated in the examination hall/room at least 15 minutes before the start of
the examination. Any candidate who comes thirty (30) or more minutes after the official
start of the examination will not be allowed to sit the examination paper.
3. Do not smuggle unauthorized materials e.g. notes, text-books, etc. in the examination room. Do
not engage in any form of examination malpractice.
4. Programmable calculators and Mobile Phones are not allowed in and around examination rooms.

7
5. Candidates are instructed to present themselves at the entrance to the examination rooms/halls for
checking by the examination supervisors for smuggled information in area like pockets, shoes or
any other body parts.
6. At the start of each examination, the candidates’ representative should examine the question
paper envelope(s) to find out whether (it is), they are intact or not In case the envelope(s) is/are
tempered with, report this matter to the Executive Secretary UBSTEB, P.O. Box 1499, Tel.: 0393
208 057 or 0393 248 739, Email: info@ubteb.go.ug.
7. Attend carefully to the instructions given on the question paper rubric. Do not answer more
questions than asked for. The examiner will not mark the extra questions answered.
8. Write your correct names, registration number and paper code on each page of your answer
booklets and any separate sheet(s) used. Poor handwriting may lead to loss of marks and results.
9. Sit only the examination paper you registered for. No results may be issued for papers sat but not
registered for. Register your attendance for each paper with the examination supervisor.
10. Sit the examination only at the Centre where you have registered to take it.
11. At the end of the examination, stop writing when instructed to do so, arrange your scripts in
order, make sure that they all have your registration number and fasten them together at the top
left hand corner.
12. Do not go out immediately at the end of each examination. Witness the verification and sealing of
the scripts in the return envelope.
13. Leave all the used and unused booklets and other official stationery inside the examination room.
14. Sharing of Calculators, Mathematical/Reference tables and charts is NOT allowed during
examination period. Borrowing of pens shall be done after consulting examination supervisor.
15. Do NOT write anything on the Question paper. All rough work should be done in the official
answer booklet provided. Afterwards rough work should be cancelled.
16. Any attempt to indulge in a malpractice even in one paper will lead to cancellation of results
of the entire year/semester.

ONESMUS OYESIGYE (CPA)

EXECUTIVE SECRETARY