9.3.8 Lab Exploring Nmap

9.3.
8 Lab - Exploring Nmap
This lab has been updated for use on NETLAB+.

www.netdevgroup.com
Objectives
Part 1: Exploring Nmap
Part 2: Scanning for Open Ports
Background / Scenario
Port scanning is usually part of a reconnaissance attack. There are a variety of port scanning methods that
can be used. We will explore how to use the Nmap utility. Nmap is a powerful network utility that is used for
network discovery and security auditing.
Instructions
Part 1: Exploring Nmap

In this part, you will use manual pages (or man pages for short) to learn more about Nmap.
The man [ program |utility | function] command displays the manual pages associated with the arguments.
The manual pages are the reference manuals found on Unix and Linux OSs. These pages can include these
sections: Name, Synopsis, Descriptions, Examples, and See Also.
a. Launch the Workstation VM. Log in with username analyst and the password cyberops.
b. Open a terminal.
c. At the terminal prompt, enter man nmap.
[analyst@secOps ~]$ man nmap
Questions:
What is Nmap?
Type your answers here.
What is nmap used for?
d. While in the man page, you can use the up and down arrow keys to scroll through the pages. You can
also press the space bar to forward one page at a time.
To search for a specific term or phrase use enter a forward slash (/) or question mark (?) followed by the
term or phrase. The forward slash searches forward through the document, and the question mark
searches backward through the document. The key n moves to the next match.
 2017 - 2021 Cisco and/or its affiliates. All rights reserved. Cisco Public Page 1 of 7 www.netacad.com
9.3.8 Lab - Exploring Nmap
Type /example and press ENTER. This will search for the word example forward through the man page.
e. In the first instance of example, you see three matches. To move to the next match, press n.
Look at Example 1.
Question:
What is the nmap command used?

Use the search function to answer the following questions.

Questions:
What does the switch -A do?

What does the switch -T4 do?

f. Scroll through the page to learn more about nmap. Type q when finished.
Part 2: Scanning for Open Ports

In this part, you will use the switches from the example in the Nmap man pages to scan your localhost, your
local network.
Step 1: Scan your localhost.

a. If necessary, open a terminal on the VM. At the prompt, enter nmap -A -T4 localhost. Depending on your
local network and devices, the scan will take anywhere from a few seconds to a few minutes.
[analyst@secOps ~]$ nmap -A -T4 localhost
Starting Nmap 7.40 ( https://nmap.org ) at 2017-05-01 17:20 EDT

Nmap scan report for localhost (127.0.0.1)
Host is up (0.000056s latency).
Other addresses for localhost (not scanned): ::1
rDNS record for 127.0.0.1: localhost.localdomain
Not shown: 996 closed ports
PORT STATE SERVICE VERSION
21/tcp open ftp vsftpd 2.0.8 or later
| ftp-anon: Anonymous FTP login allowed (FTP code 230)
|_-rw-r--r-- 1 0 0 0 Apr 19 15:23 ftp_test
<some output omitted>
b. Review the results and answer the following questions.

Questions:
Which ports and services are opened?

For each of the open ports, record the software that is providing the services.
Step 2: Scan your network.

Warning: Before using Nmap on any network, please gain the permission of the network owners
before proceeding.
a. At the terminal command prompt, enter ip address to determine the IP address and subnet mask for this
host. For this example, the IP address for this VM is 10.0.2.15 and the subnet mask is 255.255.255.0.
[analyst@secOps ~]$ ip address
<output omitted>
2: enp0s3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP
group default qlen 1000
link/ether 08:00:27:ed:af:2c brd ff:ff:ff:ff:ff:ff
inet 10.0.2.15/24 brd 10.0.2.255 scope global dynamic enp0s3
valid_lft 85777sec preferred_lft 85777sec
inet6 fe80::a00:27ff:feed:af2c/64 scope link
valid_lft forever preferred_lft forever
Run the command on the Workstation VM, record the IP address and subnet mask.
Question:
Which network does your VM belong to?

b. To locate other hosts on this LAN, enter nmap -A -T4 network address/prefix. The last octet of the IP
address should be replaced with a zero. For example, in the IP address 10.0.2.15, the .15 is the last
octet. Therefore, the network address is 10.0.2.0. The /24 is called the prefix and is a shorthand for the
netmask 255.255.255.0. If your VM has a different netmask, search the internet for a “CIDR conversion
table” to find your prefix. For example, 255.255.0.0 would be /16. The network address 10.0.2.0/24 is
used in this example
Note: This operation can take some time, especially if you have many devices attached to the network. In
one test environment, the scan took about 4 minutes.
[analyst@secOps ~]$ nmap -A -T4 192.168.0.0/24
Questions:
How many hosts are up?

From your Nmap results, list the IP addresses of the hosts that are on the same LAN as your VM. List
some of the services that are available on the detected hosts.
Step 3: Review a remote server nmap scan example.

a. On your physical host computer, open a web browser, and navigate to scanme.nmap.org. Please read
the message posted.
Question:
What is the purpose of this site?

b. Review the following nmap scan example of scanme.nmap.org:
[analyst@secOps Desktop]$ nmap -A -T4 scanme.nmap.org
Starting Nmap 7.40 ( https://nmap.org ) at 2017-05-01 16:46 EDT

Nmap scan report for scanme.nmap.org (45.33.32.156)
Host is up (0.040s latency).
Other addresses for scanme.nmap.org (not scanned): 2600:3c01::f03c:91ff:fe18:bb2f
Not shown: 992 closed ports
PORT STATE SERVICE VERSION
22/tcp open ssh OpenSSH 6.6.1p1 Ubuntu 2ubuntu2.8 (Ubuntu Linux;
protocol 2.0)
| ssh-hostkey:
| 1024 ac:00:a0:1a:82:ff:cc:55:99:dc:67:2b:34:97:6b:75 (DSA)
| 2048 20:3d:2d:44:62:2a:b0:5a:9d:b5:b3:05:14:c2:a6:b2 (RSA)
|_ 256 96:02:bb:5e:57:54:1c:4e:45:2f:56:4c:4a:24:b2:57 (ECDSA)
25/tcp filtered smtp
80/tcp open http Apache httpd 2.4.7 ((Ubuntu))
|_http-server-header: Apache/2.4.7 (Ubuntu)
|_http-title: Go ahead and ScanMe!
135/tcp filtered msrpc
139/tcp filtered netbios-ssn
445/tcp filtered microsoft-ds
593/tcp filtered http-rpc-epmap
4444/tcp filtered krb524
9929/tcp open nping-echo Nping echo
31337/tcp open tcpwrapped
Service Info: OS: Linux; CPE: cpe:/o:linux:linux_kernel
Service detection performed. Please report any incorrect results at

https://nmap.org/submit/ .
Nmap done: 1 IP address (1 host up) scanned in 23.96 seconds
c. Review the results and answer the following questions.

Questions:
Which ports and services are opened?

Which ports and services are filtered?
What is the IP address of the server?
What is the operating system?
Reflection Question
Nmap is a powerful tool for network exploration and management. How can Nmap help with network security?
How can Nmap be used by a threat actor as a nefarious tool?
End of document

9.3.8 Lab Exploring Nmap

Uploaded by

9.3.8 Lab Exploring Nmap

Uploaded by

9.3.

8 Lab - Exploring Nmap

This lab has been updated for use on NETLAB+.

Part 1: Exploring Nmap

What is the nmap command used?

Use the search function to answer the following questions.

What does the switch -A do?

What does the switch -T4 do?

Part 2: Scanning for Open Ports

Step 1: Scan your localhost.

Starting Nmap 7.40 ( https://nmap.org ) at 2017-05-01 17:20 EDT

b. Review the results and answer the following questions.

Which ports and services are opened?

Step 2: Scan your network.

Which network does your VM belong to?

How many hosts are up?

Step 3: Review a remote server nmap scan example.

What is the purpose of this site?

Starting Nmap 7.40 ( https://nmap.org ) at 2017-05-01 16:46 EDT

Service detection performed. Please report any incorrect results at

c. Review the results and answer the following questions.

Which ports and services are opened?

Type your answers here.

You might also like