Kluebersynth UH1!14!1600 en

Product information
Klübersynth ® UH1 14-1600

Synthetic special lubricating grease for the food-processing industry
Benefits for your application
— Supports product integrity due to NSF H1 registration

— Good wear protection with FZG test scuffing load stage 11
— Component life enhanced resulting from a special thickener with good adhesion and
corrosion protection
— Good pumpability in centralised systems
Application
Before substituting Klübersynth UH1 14-1600
Klübersynth UH1 14-1600 is especially suitable
for other greases, thoroughly clean the
for applications in machines and installations
lubrication/friction points. If the greases are
used in the food processing and pharmaceutical
miscible, relubrication is sufficient. In gears,
industries where contact with the food product
however, used grease should be removed as
is technically unavoidable.
far as possible.
It is intended for use as a fluid gear grease for
the immersion lubrication of toothed gears, This lubricant is certified as H1, which means
worm gears and chains operating more that it has been designed and registered for
smoothly with a softer grease. incidental, technically unavoidable food contact.
Specific test results referring to pharmaceutical
Description applications are not available for this product
(e.g. biocompatibility).
Klübersynth UH1 14-1600 is a high-
Therefore, before using the lubricant adequate
performance food grade lubricating grease
risk analyses have to be performed and, if
especially developed for the food processing
necessary, suitable measures be taken by the
and pharmaceutical industries.
manufacturer and user of pharmaceutical
It complies with German food regulations and installations in order to exclude the risk of
meets the requirements set forth in the health hazards and personal injuries.
guidelines of sec. 21 CFR 178.3570 of FDA
regulations. Furthermore the product has been Minimum shelf life
designed in the light of the requirements of the The minimum shelf life is approx. 12 months if
ISO 21469 / DIN V 10517. the product is stored in its unopened original
container in a dry, frost-free place.
With its soft consistency Klübersynth UH1 14-
1600 is particularly suitable as a fluid gear
grease providing good antiwear protection. It Pack sizes
also ensures good protection against corrosion
and is mineral hydrocarbon free. 1 kg cans
25 kg bucket
Application notes
Klübersynth UH1 14-1600 can be applied by Material safety data sheets
brush, spatula, grease gun, or grease cartridge.
Material safety data sheets can be downloaded
It can also be dispensed through centralised or requested via our website www.klueber.com.
single-line lubrication systems. You may also obtain them through your contact
person at Klüber.
Klübersynth UH1 14-1600, Art. No.: 096038, en Edition 03.07, replaces Edition 04.03
MA-LSL/DL
Product information
Klübersynth ® UH1 14-1600

Synthetic special lubricating grease for the food-processing industry
Product data Klübersynth UH1 14-1600

Colour light-yellow
Texture homogeneous, fibrous
3
Density, DIN 51 757 at 20°C,[g/cm ] 0.85
Drop point, DIN ISO 2176, [°C] >220
Worked penetration at 25 °C,
DIN ISO 2137; [0.1 mm] 400 to 430*
Consistency
NLGI grade, DIN 51 818 00
Service temperature range**, [°C] approx. -45 to 120
* A special feature of this product is the very fast increase of worked penetration. It quickly becomes very soft (approx. 6 months) thus falling beyond the indicated
worked penetration range and the NLGI classification.
** Service temperatures are guide values which depend on the lubricant's composition, the intended use and the application method. Lubricants change their
consistency, apparent dynamic viscosity or viscosity depending on the mechano-dynamical loads, time, pressure and temperature. These changes in product
characteristics may affect the function of a component.
Lubrication is our world

With more than 2000 products available around the world, you can be sure that Klüber
has the right product for your application. Please contact Klüber Lubrication specialists
worldwide to assist you in all matters regarding lubrication.
www.klueber.com
Klüber Lubrication München KG, Geisenhausenerstraße 7, 81379 München, Germany, phone +49 89 7876-0, fax +49 89 7876-333.
The data in this product information is based on our general experience and knowledge at the time of printing and is intended to give information of possible
applications to a reader with technical experience. It constitutes neither an assurance of product properties nor does it release the user from the obligation of
performing preliminary tests with the selected product. We recommend contacting our Technical Consulting Staff to discuss your specific application. If required and
possible we will be pleased to provide a sample for testing. Klüber products are continually improved. Therefore, Klüber Lubrication reserves the right to change all
the technical data in this product information at any time without notice.
Klüber Lubrication, a company of the Freudenberg Group
Publisher and Copyright: Klüber Lubrication München KG. Reprints, total or in part, are permitted only prior consultation with Klüber Lubrication München KG
and if source is indicated and voucher copy is forwarded.

Kluebersynth UH1!14!1600 en

Uploaded by

Kluebersynth UH1!14!1600 en

Uploaded by

Product information

Klübersynth ® UH1 14-1600

Benefits for your application

— Supports product integrity due to NSF H1 registration

Klübersynth ® UH1 14-1600

Product data Klübersynth UH1 14-1600

Lubrication is our world

Klüber Lubrication, a company of the Freudenberg Group

You might also like