1.

Computer Fundamentals ─ Overview

Today’s world is an information-rich world and it has become a necessity for everyone to
know about computers. A computer is an electronic data processing device, which accepts
and stores data input, processes the data input, and generates the output in a required
format.
COMPUTER stands for Common Operating Machine Purposely Used for Technological
and Educational Research
A computer is an electronic device which takes input from the user, processes
it and gives the output as per user’s requirement.

Functionalities of a Computer
If we look at it in a very broad sense, any digital computer carries out the following five
functions:

Step 1 - Takes data as input.

Step 2 - Stores the data/instructions in its memory and uses them as required.

Step 3 - Processes the data and converts it into useful information.

Step 4 - Generates the output.

Step 5 - Controls all the above four steps.

Advantages of Computers
Following are certain advantages of computers.
High Speed
 Computer is a very fast device.

 It is capable of performing calculation of very large amount of data.

 The computer has units of speed in microsecond, nanosecond, and even the Pico
second.
  It can perform millions of calculations in a few seconds as compared to man who will
spend many months to perform the same task.

Accuracy
 In addition to being very fast, computers are very accurate.

 The calculations are 100% error free.

 Computers perform all jobs with 100% accuracy provided that the input is correct.

Storage Capability
 Memory is a very important characteristic of computers.

 A computer has much more storage capacity than human beings.

 It can store large amount of data.

 It can store any type of data such as images, videos, text, audio, etc.

Diligence
 Unlike human beings, a computer is free from monotony, tiredness, and lack of
concentration.

 It can work continuously without any error and boredom.

 It can perform repeated tasks with the same speed and accuracy.

Versatility
 A computer is a very versatile machine.

 A computer is very flexible in performing the jobs to be done.

 This machine can be used to solve the problems related to various fields.

 At one instance, it may be solving a complex scientific problem and the very next
moment it may be playing a card game.

Reliability
 A computer is a reliable machine.
 Modern electronic components have long lives.
 Computers are designed to make maintenance easy.

Automation
 Computer is an automatic machine.
  Automation is the ability to perform a given task automatically. Once the computer
receives a program i.e., the program is stored in the computer memory, then the
program and instruction can control the program execution without human
interaction.

Reduction in Paper Work and Cost

 The use of computers for data processing in an organization leads to reduction in
paper work and results in speeding up the process.

 As data in electronic files can be retrieved as and when required, the problem of
maintenance of large number of paper files gets reduced.

 Though the initial investment for installing a computer is high, it substantially

reduces the cost of each of its transaction.

Disadvantages of Computers
Following are certain disadvantages of computers.

No I.Q.
 A computer is a machine that has no intelligence to perform any task.
 Each instruction has to be given to the computer.
 A computer cannot take any decision on its own.

Dependency
 It functions as per the user’s instruction, thus it is fully dependent on humans.

Environment
 The operating environment of the computer should be dust free and suitable.

No Feeling
 Computers have no feelings or emotions.

 It cannot make judgment based on feeling, taste, experience, and knowledge unlike
humans.
2.Computer Fundamentals ─ Applications

In this chapter, we will discuss the application of computers in various fields.

Business
A computer has high speed of calculation,
diligence, accuracy, reliability, or versatility
which has made it an integrated part in all
business organizations.

Computer is used in business organizations for:

 Payroll calculations
 Budgeting
 Sales analysis
 Financial forecasting
 Managing employee database
 Maintenance of stocks, etc.

Banking
Today, banking is almost totally dependent on
computers.

Banks provide the following facilities:

 Online accounting facility, which includes

checking current balance, making
deposits and overdrafts, checking
interest charges, shares, and trustee
records.

 ATM machines which are completely

automated are making it even easier for
customers to deal with banks.
Insurance
Insurance companies are keeping all records up-
to-date with the help of computers. Insurance
companies, finance houses, and stock broking
firms are widely using computers for their
concerns.

Insurance companies are maintaining a database

of all clients with information showing:

 Procedure to continue with policies

 Starting date of the policies
 Next due installment of a policy
 Maturity date
 Interests due
 Survival benefits
 Bonus

Education
The computer helps in providing a lot of facilities in the education system.

 The computer provides a tool in the education system known as CBE (Computer
Based Education).

 CBE involves control, delivery, and

evaluation of learning.

 Computer education is rapidly increasing

the graph of number of computer
students.

 There are a number of methods in which

educational institutions can use a
computer to educate the students.

 It is used to prepare a database about

performance of a student and analysis is carried out on this basis.
Marketing
In marketing, uses of the computer are following:
 Advertising - With computers,
advertising professionals create art and
graphics, write and revise copy, and print
and disseminate ads with the goal of
selling more products.

 Home Shopping - Home shopping has

been made possible through the use of
computerized catalogues that provide
access to product information and permit
direct entry of orders to be filled by the
customers.

Healthcare
Computers have become an important part in hospitals, labs, and dispensaries. They are
being used in hospitals to keep the record of patients and medicines. It is also used in
scanning and diagnosing different diseases. ECG, EEG, ultrasounds and CT scans, etc. are
also done by computerized machines.

Following are some major fields of health care in which computers are used.

 Diagnostic System - Computers are used to collect data and identify the cause of
illness.

 Lab-diagnostic System - All tests can be

done and the reports are prepared by
computer.

 Patient Monitoring System - These are

used to check the patient's signs for
abnormality such as in Cardiac Arrest,
ECG, etc.

 Pharma Information System

- Computer is used to check drug labels,
expiry dates, harmful side effects, etc.

 Surgery - Nowadays, computers are also used in performing surgery.

Engineering Design
Computers are widely used for Engineering purpose.

One of the major areas is CAD (Computer Aided Design) that provides creation and
modification of images. Some of the fields are:
  Structural Engineering - Requires stress
and strain analysis for design of ships,
buildings, budgets, airplanes, etc.

 Industrial Engineering - Computers

deal with design, implementation, and
improvement of integrated systems of
people, materials, and equipment.

 Architectural Engineering - Computers

help in planning towns, designing
buildings, determining a range of buildings
on a site using both 2D and 3D drawings.

Military
Computers are largely used in defence. Modern
tanks, missiles, weapons, etc. Military also
employs computerized control systems. Some
military areas where a computer has been used
are:

 Missile Control
 Military Communication
 Military Operation and Planning
 Smart Weapons

Communication
Communication is a way to convey a message, an idea, a picture, or speech that is received
and understood clearly and correctly by the person
for whom it is meant. Some main areas in this
category are:

 E-mail
 Chatting
 Usenet
 FTP
 Telnet
 Video-conferencing
Government
Computers play an important role in government services. Some major fields in this category
are:

 Budgets
 Sales tax department
 Income tax department
 Computation of male/female ratio
 Computerization of voters lists
 Computerization of PAN card
 Weather forecasting
3.Computer Fundamentals ─ Generations

Generation in computer terminology is a change in technology a computer is/was being

used. Initially, the generation term was used to distinguish between varying hardware
technologies. Nowadays, generation includes both hardware and software, which together
make up an entire computer system.

There are five computer generations known till date. Each generation has been discussed in
detail along with their time period and characteristics. In the following table, approximate
dates against each generation has been mentioned, which are normally accepted.

Following are the main five generations of computers.

Sr.
Generation & Description
No.

First Generation
1
The period of first generation: 1946-1959. Vacuum tube based.

Second Generation
2 The period of second generation: 1959-1965. Transistor based.

Third Generation
3 The period of third generation: 1965-1971. Integrated Circuit based.

Fourth Generation
4 The period of fourth generation: 1971-1980. VLSI microprocessor based.

Fifth Generation
5 The period of fifth generation: 1980-onwards. ULSI microprocessor based.

First Generation Computers

The period of first generation was from 1946-1959. The computers of first generation used
vacuum tubes as the basic components for memory and circuitry for CPU (Central
Processing Unit). These tubes, like electric bulbs, produced a lot of heat and the installations
used to fuse frequently. Therefore, they were very expensive and only large organizations
were able to afford it.
In this generation, mainly batch processing operating system was used. Punch cards, paper
tape, and magnetic tape was used as input and output devices. The computers in this
generation used machine code as the programming language.

The main features of the first generation are:

 Vacuum tube technology

 Unreliable
 Supported machine language only
 Very costly
 Generated a lot of heat
 Slow input and output devices
 Huge size
 Need of AC
 Non-portable
 Consumed a lot of electricity

Some computers of this generation were:

 ENIAC
 EDVAC
 UNIVAC
 IBM-701
 IBM-650
Second Generation Computers
The period of second generation was from 1959-1965. In this generation, transistors were
used that were cheaper, consumed less power, more compact in size, more reliable and
faster than the first generation machines made of vacuum tubes. In this generation,
magnetic cores were used as the primary memory and magnetic tape and magnetic disks as
secondary storage devices.

In this generation, assembly language and high-level programming languages like FORTRAN,
COBOL were used. The computers used batch processing and multiprogramming operating
system.

The main features of second generation are:

 Use of transistors
 Reliable in comparison to first generation computers
 Smaller size as compared to first generation computers
 Generated less heat as compared to first generation computers
 Consumed less electricity as compared to first generation computers
 Faster than first generation computers
 Still very costly
 AC required
 Supported machine and assembly languages

Some computers of this generation were:

 IBM 1620
 IBM 7094
 CDC 1604
 CDC 3600
 UNIVAC 1108
Third Generation Computers
The period of third generation was from 1965-1971. The computers of third generation used
Integrated Circuits (ICs) in place of transistors. A single IC has many transistors, resistors,
and capacitors along with the associated circuitry.

The IC was invented by Jack Kilby. This development made computers smaller in size,
reliable, and efficient. In this generation remote processing, time-sharing, multi-
programming operating system were used. High-level languages (FORTRAN-II TO IV, COBOL,
PASCAL PL/1, BASIC, ALGOL-68 etc.) were used during this generation.

The main features of third generation are:

 IC used
 More reliable in comparison to previous two generations
 Smaller size
 Generated less heat
 Faster
 Lesser maintenance
 Costly
 AC required
 Consumed lesser electricity
 Supported high-level language

Some computers of this generation were:

 IBM-360 series
 Honeywell-6000 series
 PDP (Personal Data Processor)
 IBM-370/168
 TDC-316
Fourth Generation Computers
The period of fourth generation was from 1971-1980. Computers of fourth generation used
Very Large Scale Integrated (VLSI) circuits. VLSI circuits having about 5000 transistors and
other circuit elements with their associated circuits on a single chip made it possible to have
microcomputers of fourth generation.

Fourth generation computers became more powerful, compact, reliable, and affordable. As a
result, it gave rise to Personal Computer (PC) revolution. In this generation, time sharing,
real time networks, distributed operating system were used. All the high-level languages like
C, C++, DBASE etc., were used in this generation.

The main features of fourth generation are:

 VLSI technology used

 Very cheap
 Portable and reliable
 Use of PCs
 Very small size
 Pipeline processing
 No AC required
 Concept of internet was introduced
 Great developments in the fields of networks
 Computers became easily available

Some computers of this generation were:

 DEC 10
 STAR 1000
 PDP 11
 CRAY-1(Super Computer)
 CRAY-X-MP(Super Computer)
Fifth Generation Computers
The period of fifth generation is 1980-till date. In the fifth generation, VLSI technology
became ULSI (Ultra Large Scale Integration) technology, resulting in the production of
microprocessor chips having ten million electronic components.

This generation is based on parallel processing hardware and AI (Artificial Intelligence)

software. AI is an emerging branch in computer science, which interprets the means and
method of making computers think like human beings. All the high-level languages like C
and C++, Java, .Net etc., are used in this generation.

AI includes:

 Robotics
 Neural Networks
 Game Playing
 Development of expert systems to make decisions in real-life situations
 Natural language understanding and generation

The main features of fifth generation are:

 ULSI technology
 Development of true artificial intelligence
 Development of Natural language processing
 Advancement in Parallel Processing
 Advancement in Superconductor technology
 More user-friendly interfaces with multimedia features
 Availability of very powerful and compact computers at cheaper rates

Some computer types of this generation are:

 Desktop
 Laptop
 NoteBook
 UltraBook
4.Computer Fundamentals ─ Types

Computers can be broadly classified by their speed and computing power.

Sr.
Type Specifications
No.

PC (Personal It is a single user computer system having moderately

1
Computer) powerful microprocessor

It is also a single user computer system, similar to personal

2 Workstation
computer however has a more powerful microprocessor

It is a multi-user computer system, capable of supporting

3 Mini Computer
hundreds of users simultaneously.

It is a multi-user computer system, capable of supporting

4 Main Frame hundreds of users simultaneously. Software technology is
different from minicomputer.

It is an extremely fast computer, which can execute

5 Supercomputer
hundreds of millions of instructions per second.

PC (Personal Computer)
A PC can be defined as a small, relatively inexpensive computer designed for an individual
user. PCs are based on the microprocessor technology that enables manufacturers to put an
entire CPU on one chip. Businesses use personal
computers for word processing, accounting,
desktop publishing, and for running spreadsheet
and database management applications. At
home, the most popular use for personal
computers is playing games and surfing the
Internet.

Although personal computers are designed as

single-user systems, these systems are normally
linked together to form a network. In terms of
power, now-a-days high-end models of the
Macintosh and PC offer the same computing
power and graphics capability as low-end
workstations by Sun Microsystems, Hewlett-
Packard, and Dell.
Workstation
Workstation is a computer used for engineering applications (CAD/CAM), desktop publishing,
software development, and other such types of applications which require a moderate
amount of computing power and relatively high quality graphics capabilities.

Workstations generally come with a large, high-resolution graphics screen, large amount of
RAM, inbuilt network support, and a graphical user
interface. Most workstations also have mass
storage device such as a disk drive, but a special
type of workstation, called diskless workstation,
comes without a disk drive.

Common operating systems for workstations are

UNIX and Windows NT. Like PC, workstations are
also single-user computers like PC but are
typically linked together to form a local-area
network, although they can also be used as
stand-alone systems.

Minicomputer
It is a midsize multi-processing system capable of supporting up to 250 users simultaneously.

Mainframe
Mainframe is very large in size and is an expensive computer capable of supporting
hundreds or even thousands of users simultaneously. Mainframe executes many programs
concurrently and supports many simultaneous execution of programs.
Supercomputer
Supercomputers are one of the fastest computers currently available. Supercomputers are
very expensive and are employed for specialized applications that require immense amount
of mathematical calculations (number crunching).

For example, weather forecasting, scientific simulations, (animated) graphics, fluid dynamic
calculations, nuclear energy research, electronic design, and analysis of geological data (e.g.
in petrochemical prospecting).
5.Computer Fundamentals ─ BlockDiagramofComputer&Its Component

All types of computers follow the same basic logical structure and perform the following five
basic operations for converting raw input data into information useful to their users.

Sr. No. Operation Description

The process of entering data and instructions into the

1 Take Input
computer system.

Saving data and instructions so that they are available for

2 Store Data
processing as and when required.

Performing arithmetic, and logical operations on data in

3 Processing Data
order to convert them into useful information.

Output The process of producing useful information or results for

4
Information the user, such as a printed report or visual display.

Control the Directs the manner and sequence in which all of the above
5
workflow operations are performed.
 Input Unit
This unit contains devices with the help of which we enter data into the computer. This unit
creates a link between the user and the computer. The input devices translate the
information into a form understandable by the computer.
The 3 major functions of the input unit are-

 Take the data to be processed by the user.

 Convert the given data into machine-readable form.

 And then, transmit the converted data into the main memory of the computer.
The sole purpose is to connect the user and the computer. In addition, this creates
easy communication between them.

CPU (Central Processing Unit)

CPU is considered as the brain of the computer. CPU performs all types of data processing
operations. It stores data, intermediate results, and instructions (program). It controls the
operation of all parts of the computer.

CPU itself has the following three components:

 ALU (Arithmetic Logic Unit)

The Arithmetic Logic Unit is made of two terms, arithmetic and logic. There are two
major functions
that this unit performs.

1. Data inserted through the input unit into the primary memory. Performs the
basic arithmetical operation on it. Like addition, subtraction, multiplication, and
division.
It performs all sorts of calculations required on the data. Then sends back data
to the storage.

2. The unit is also responsible for performing logical operations like, AND, OR,
Equal to, Less than, etc. In addition to this it conducts merging, sorting, and
selection of the given data.

 Memory Unit
All the data that has to be processed or has been processed is stored in the memory
unit.
 The memory unit acts as a hub of all the data. It transmits it to the required part of
the computer whenever necessary.

There are two types of computer memory-

1. Primary memory – This type of memory cannot store a vast amount of data.
Therefore, it is only used to store recent data. The data stored in this is
temporary.
It can get erased once the power is switched off. Therefore, is also called
temporary
memory or the main memory.

RAM stands for Random Access Memory. It is an example of primary memory.

This memory is directly accessible by the CPU. It is used for reading and writing
purposes. For data to be processed, it has to be first transferred to the RAM and
then to the CPU.

2. Secondary memory – As explained above, the primary memory stores

temporary data. Thus it cannot be accessed in the future. For permanent
storage purposes, secondary memory is used. It is also called the permanent
memory or
the auxiliary memory. The hard disk is an example of secondary memory.
Even in a power failure data does not get erased easily.

 Control Unit

The control unit as the name suggests is the controller of all the activities/tasks and
operations.
All this is performed inside the computer.

The memory unit sends a set of instructions to the control unit. Then the control
unit in turn
converts those instructions. After that these instructions are converted to control
signals.

These control signals help in prioritizing and scheduling the activities. Thus, the
control unit
coordinates the tasks inside the computer in sync with the input and output units.

Output Unit
The output unit consists of devices with the help of which we get the information from the
computer. This unit is a link between the computer and the users. Output devices translate
the computer's output into a form understandable by the users.