Scribd
Upload
12 views

Aprhtt Manual

Nen

Uploaded by

jamesthepershing
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
12 views

Aprhtt Manual

Nen

Uploaded by

jamesthepershing
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

RHTT Wagon Pack

Contents
How to Install............................................................................................................................................ 2
How to Use in the Scenario Editor .................................................................................................... 2
Numbering ............................................................................................................................................ 2
Bits and Bobs ........................................................................................................................................ 3
Scenario ...................................................................................................................................................... 3

Page 1
How to Install
1) Locate where you have downloaded this pack and unzip it. Information on
how to do this can be found here.
2) Go to the location where you have extracted the files from the .zip file.
3) Now find the .exe file called ‘RHTT Wagon Pack’. Double-click this file.
4) Follow the steps and by the end of the process, this pack will have installed.

How to Use in the Scenario Editor


How to place
To place a wagon in the scenario editor, please follow the instructions below:

1) In the middle left-hand fly-out, click the object set filter


which looks like a blue box with an orange arrow to the
right of it.

2) Go to the right-hand fly-out which should have


appeared. Select ‘AP’ from the drop-down menu.

3) Tick the second & third box beside ‘RHTTWagonPack01’.

4) The wagons should now be visible in the middle left-


hand fly-out. Please note that these wagons are
found in the ‘Engines/Tender’ part of the fly-out and
not the ‘Rolling Stock’ part as is normal for wagons. This is to ensure the
spray sound on these wagons does not cut out prematurely when
watching them pass.

Numbering
Tail light
When placing a wagon in the scenario editor, you are able to disable the tail light by
adding ;TL=0 to the wagon number. By default, the tail light shows on any wagon
not coupled at both ends.

Page 2
Bits and Bobs
• Audio is included for the generator and sandite modules on these wagons.
This audio is only active on loaded variants.
• Only the loaded ‘WGW’ & ‘WGS’ variants spray the rails. This spraying starts
and stops automatically around 20mph. In reality, any spraying below this
speed risks damaging the rails due to the sheer force of the jet.
• Choose the non-loaded variants of the ‘WGW’ & ‘WGS’ variants if you wish for
the spray to be off.
• The ‘WWW’ variant purely carries water and the ‘WWS’ variant only lays
sandite.

Scenario
APRHTT: 1Z93 08:50 Leicester L.I.P. - Cricklewood U.G.L.
Route = MML - London to Bedford (AP)
Track covered = Bedford North Junction – Cricklewood U.G.L.
Traction = InterCity Swallow 37685 & EW&S 37717
Date = 19th November 2004
Duration = 1 hour 10 minutes

Page 3

You might also like