8 INCH TURNTABLE

PA R T S M A N UA L
CHIPPER

CH8670H (76824) - 670 cc HONDA

CH8993H (76835) - 993 cc BRIGGS &

STRATTON

PN: 18281-00
Rev. 090109
Companion to 18280-00
VIN RANGE: 5VJAA00148W001165 - Current
Before You Begin
DEAR ECHO BEAR CAT CUSTOMER
Thank you for purchasing a ECHO Bear Cat product. The ECHO Bear Cat line is designed, tested, and manufactured
to give years of dependable performance. To keep your machine operating at peak efficiency, it is necessary to adjust
it correctly and make regular inspections. The following pages will assist you in the operation and maintenance of your
machine. Please read and understand this manual before operating your machine.
If you have any questions or comments about this manual, please call us toll-free at 1-800-247-7335.
If you have any questions or problems with your machine, please call or write your local authorized ECHO Bear Cat Dealer.
This document is based on information available at the time of its publication. ECHO Bear Cat is continually making
improvements and developing new equipment. In doing so, we reserve the right to make changes or add improvements
to our product without obligation for equipment previously sold.

PLEASE SEND US YOUR WARRANTY CARD

A warranty card is included in your owner's kit packaged with your machine. Please take the time to fill in the information
requested on the card. When you send your completed card to us, we will register your machine and start your
coverage under our limited warranty.

FOR MACHINE SERVICE OR PARTS: ORDERING PARTS

For service assistance, contact your nearest authorized Only genuine ECHO Bear Cat replacement parts should
ECHO Bear Cat dealer or the factory. For parts, contact be used to repair the machine. Replacement parts
your authorized dealer. The parts manual for your machine manufactured by others could present safety hazards,
is available at http://bearcatproducts.com/main/support/ even though they may fit on this machine. Replacement
index_html. Your dealer will need to know the identification parts are available from your ECHO Bear Cat dealer.
number of your machine to provide the most efficient Provide the following when ordering parts:
service. See below for information on how to identify and
record the identification number for your machine. The SERIAL NUMBER OR VIN of your machine.
The PART NUMBER of the part.
FOR ENGINE SERVICE OR PARTS:
The PART DESCRIPTION.
For engine service or parts, contact your nearest authorized
engine dealer. ECHO Bear Cat does not handle any parts, The QUANTITY needed.
repairs or warranties for engines.

IDENTIFICATION NUMBER LOCATION

Your machine will have either a serial number or vehicle
identification number (VIN). VINs are located on the left
side of the trailer frame near the hitch. They are 17-digit
numbers of the format: 5VJAA001XXWXXXXXX. Serial
numbers are located on the machine body. They are
6-digit numbers. SERIAL NUMBER OR VIN
Record your identification number in the space provided
and on the warranty registration card.

HOW TO CONTACT ECHO BEAR CAT

ADDRESS PHONE E-MAIL HOURS

237 NW 12th Street 800-247-7335 Monday - Friday,

opesales@crary.com
P.O. Box 849 701-282-5520 8 am to 5 pm
service@crary.com
West Fargo, ND 58078 FAX: 701-282-9522 Central Time

© 2009, CRARY INDUSTRIES, ALL RIGHTS RESERVED. PRODUCED AND PRINTED IN THE U.S.A.
THIS PAGE INTENTIONALLY LEFT BLANK
 TABLE OF CONTENTS

DESCRIPTION PAGE

FULL CHIPPER EXPLODED VIEW ..................................................................... 1

FRAME ASSEMBLY ............................................................................................ 2
FRAME ASSEMBLY (EURO MODELS) ............................................................... 4
FRAME ASSEMBLY (F MODELS) ....................................................................... 6
TURNTABLE ASSEMBLY (A) .............................................................................. 7
TURNTABLE ASSEMBLY (B) .............................................................................. 8
DISK HOUSING ASSEMBLY (A) ........................................................................ 10
DISK HOUSING ASSEMBLY (B) ....................................................................... 12
ENGINE ASSEMBLY (670 cc HONDA) .............................................................. 14
ENGINE ASSEMBLY (993 cc B&S) ................................................................... 15
SWITCH BOX ASSEMBLY ................................................................................. 16
FEED ROLLER HOUSING ASSY (A) ................................................................. 17
FEED ROLLER HOUSING ASSY. (B) ................................................................ 18
PANEL ASSEMBLY ............................................................................................ 20
BRAKE MOUNT ASSEMBLY ............................................................................. 21
HITCH ASSEMBLY ............................................................................................ 22
HITCH ASSEMBLY (EURO) ............................................................................... 23
CHUTE ASSEMBLY ........................................................................................... 24
CHUTE ASSEMBLY (EURO) .............................................................................. 26
DISCHARGE CHUTE ASSEMBLY ..................................................................... 28
HYDRAULIC HOSE ASSEMBLY........................................................................ 29
ELECTRICAL SCHEMATIC ................................................................................ 30
HYDRAULIC SCHEMATIC ................................................................................. 31
LIGHT HARNESS ............................................................................................... 32
SERVICE PARTS ................................................................................................ 33
09/09 FULL CHIPPER EXPLODED VIEW

FEED ROLLER HOUSING DISK HOUSING

ASSEMBLY (A) ASSEMBLY (B)

DISCHARGE
CHUTE
ASSEMBLY

FEED ROLLER
SWITCH BOX HOUSING
ASSEMBLY ASSEMBLY (B)

TURNTABLE
ASSEMBLY
CHUTE (A,B) DISK HOUSING
ASSEMBLY ASSEMBLY (A)

BRAKE MOUNT
ASSEMBLY

PANEL
ASSEMBLY

FRAME ASSEMBLY

ENGINE ASSEMBLY
HITCH ASSEMBLY

8 INCH TURNTABLE CHIPPER Page 1

Page 2
18 4
34 31 15
2 10 20
10
19 17
35
8
32 3
10 12
FRAME ASSEMBLY

17 15
27 14
35 10 30
17 30
15 10
17 11
17
13
7 11 17
9

25 10
13 32 35
22 20
11 15

11 7 10
31
1

8 INCH TURNTABLE CHIPPER

20

21
6
29
20
24 10
17
15
5
28 11 10 17

35 17
7
26 15
15
23
09/09
 DOMESTIC FRAME ASSEMBLY
ITEM PART NUMBER DESCRIPTION
1 12125 WHEEL AND TIRE ASSEMBLY
2 14368-00 LIGHT, LICENSE PLATE
3 14509-00 ROLLER, 5” X 1” X 5/8 NOFF AL
4 14367-00 PLUG, 12 VOLT LIGHT
5 14374-00 REFLECTOR, WIDE ANGLE RED
6 15006 BOLT, 3/8 X 1” GR5 CAPSCW ZP
7 15016 BOLT, 1/2 X 3-1/2” HEX HD
8 15022 BOLT, 5/8-11 X 5” HEX HD GR5 ZP
9 15030 WASHER, 1/4” FLAT
10 15031 WASHER, 3/8” FLAT
11 15034 WASHER, 1/2” FLAT
12 15035 WASHER, 5/8” FLAT
13 15049 NUT, 1/2” CENTERLOCK GR8 ZP
14 15050 NUT, 5/8” CENTERLOCK
15 15057 BOLT, 3/8 X 1” CRG
16 15355 NUT, 1/4” NYLOCK
17 15388 NUT, 3/8” NYLOCK
18 15397 NUT, #10X24 NYLOCK
19 15423 SCREW, #10X24X1/2 PAN PHP ZP
20 15501 BOLT, 3/8 X 3-1/4” GR5 HEX HD

8 INCH TURNTABLE CHIPPER

21 16808 PIN, 3/8 X 2-3/4” SNAPPER
22 16903 LIGHT, LEFT HAND TAIL
23 16904 LIGHT, RIGHT HAND TAIL
24 18100-00 AXEL, TORSION SUSPENSION
25 71278 BRACKET, LEFT HAND TAIL LIGHT
26 71279 BRACKET, RIGHT HAND TAIL LIGHT
27 73205-12 SPACER, 7/8 X 3/4”
28 73449-12 WELDMENT, REAR STABILIZER
29 73450-12 GUIDE, TRAILER SUPPORT
30 73864-00 PIN, CHIPPER PIVOT
31 73865-12 FENDER, CHIPPER
32 73866-12 BRACKET, FENDER
33 74814-12 SPACER, 2.50 OD X 1.56 ID X 0.25”
34 75183-12 BRACKET, LICENSE PLATE

Page 3
35 75210-12 ANGLE, FENDER GUSSET
Page 4
28 19
19 11
11 23
19 34 32
16 10
38 40
3
13

16 15
19 11 19 21 39
9 33
41
19 42
37
29
30
16 7
11 27
34 19
20
FRAME ASSEMBLY (EURO MODELS)

12 14 12 19
17
36 11
16 29 16
6 1 19 34
23
14 28
12 11
9

8 INCH TURNTABLE CHIPPER

35
11

5 19
43 23 11
31 16
22 20
23
24 12 17
19
2
25 9 11
26
8 19

16 34 11
1 16 36
4
09/09
 EURO FRAME ASSEMBLY 29 73866-12 BRACKET, FENDER
ITEM PART NUMBER DESCRIPTION 30 73867-12 WELDMENT, CHIPPER TRAILER
1 0934-0004-00 GROMMET, 1/4 X 5/8” RUBBER 31 74564-00 ASSEMBLY, TORSION AXLE
2 12125 WHEEL AND TIRE ASSEMBLY 32 74627-12 WELDMENT, CABLE BRACKET
3 14509-00 ROLLER, PLASTIC 5 X 1 X 5/8” NOFF AL 33 74814-12 SPACER, 2.5 OD X 1.56 ID X 0.25”
4 14566-00 LIGHT, TAIL RH 34 75210-12 ANGLE, FENDER GUSSET
LIGHT, LICENSE PLATE (SUPERCEDED BY 35 75268-12 WELDMENT, LICENSE PLATE
14567-00
5 14368) 36 75271-12 BRACKET, TAIL LIGHT
14368 LIGHT, LICENSE PLATE 37 74329-12 BAR, BRAKE COMPENSATOR
6 14580-00 LIGHT, TAIL LH 38 0110-0339-00 PIN CLEVIS 3/8 X 1-1/4” ZP
7 14585-00 CABLE, BRAKE 39 14582-00 PIN, CLEVIS 5/16 X 1” ZP
8 15006 BOLT, 3/8 NC X 1” GR5 CAPSCW ZP 40 15375 COTTER PIN, 1/8 X 1.00” ZP
9 15016 BOLT, 1/2 X 3-1/2” HEX HD 41 15497 RIVET, 1/4 X 1/2” DOME HD BLIND SS
10 15022 BOLT, 5/8-11 X 5” HEX HD GR5 ZP 42 18549-00 CLAMP, CABLE MOUNT
11 15031 WASHER, 3/8” FLAT 43 14367-00 PLUG, 12 VOLT LIGHT
12 15034 WASHER, 1/2” FLAT
13 15035 WASHER, 5/8” FLAT
14 15049 NUT, 1/2” CENTERLOCK GRB ZP
15 15050 NUT, 5/8” CENTERLOCK
16 15057 BOLT, 3/8 X 1” CRG

8 INCH TURNTABLE CHIPPER

17 15132 WASHER, 3/16” FLAT
18 15301 BOLT, 5/16 X 1” CRG
19 15388 NUT, 3/8” NYLOCK
20 15397 NUT, #10X24 NYLOCK
21 15442 BOLT, 7/16 X 3/4 HEX NF
22 15460 SCREW, #10X24X3/4 PAN PHP ZP
23 15501 BOLT, 3/8 NC X 3-1/4 GR5 HEX HD
24 16808 PIN, 3/8 X 2-3/4” SNAP
25 73449-12 WELDMENT, REAR STABLIZER
26 73450-12 GUIDE, TRAILER SUPPORT
27 73864-00 PIN, CHIPPER PIVOT
28 73865-12 FENDER, CHIPPER

Page 5
 FRAME ASSEMBLY (F MODELS) CH8993H-F ONLY 09/09

7 8
6 5
18 17

10

13 1 3
12

7
13 9
6 4

16

11
14
15
2

CH8993H-F FRAME ASSEMBLY

ITEM PART NUMBER DESCRIPTION
1 14509-00 ROLLER, 5 X 1 X 5/8” NOFF AL
2 15006 BOLT, 3/8 NC X 1” GR5 CAPSCW ZP
3 15022 BOLT, 5/8-11 X 5” HEX HD GR5 ZP
4 15031 WASHER, 3/8” FLAT
5 15035 WASHER, 5/8” FLAT
6 15050 NUT, 5/8” CENTERLOCK
7 15129 WASHER, 5/8” SAE FLAT
8 15265 BOLT, 5/8-11 X 2-1/2” HEX HD GR5
9 15388 NUT, 3/8” NYLOCK
10 15497 RIVET, 1/4 X 1/2” DOME HD BLIND (SS)
11 16808 PIN, 3/8 X 2-3/4” SNAPPER
12 18549-00 CLAMP, CABLE MOUNT
13 73205-12 SPACER, 7/8 X 3/4”
14 73449-12 WELDMENT, REAR STABLIZER
15 73450-12 GUIDE, TRAILER SUPPORT
16 73864-00 PIN, CHIPPER PIVOT
17 73867-12 WELDMENT, CHIPPER TRAILER
18 74814-12 SPACER, 2.50 OD X 1.56 IDX 0.25”

Page 6 8 INCH TURNTABLE CHIPPER

 09/09 TURNTABLE ASSEMBLY (A)

17
10
6 11
22
1 12
9
16 2 4

5 12
14
21

23 15
8
14

18
26 20

3 24
12
27
15 13

25
7 19 15

TURNTABLE ASSEMBLY (A) 13 15301 BOLT, 5/16 X 1 CRG

PART 14 15355 NUT, 1/4 NYLOCK
ITEM DESCRIPTION
NUMBER 15 15356 NUT, 5/16 NYLOCK
BEARING, 1-1/2 2-BOLT 16 15768-00 U-BOLT, 1/4 X 1-1/2 PIPE
1 12117
FLANGE
17 16015 PIN, 7/16 X 1-3/4 LYNCH
2 12530 LANYARD, NYLON
18 16897 DECAL, HYDRAULIC FLUID
3 12839 BOX, SMALL BATTERY
19 18292-00 LANYARD, STEEL 1/8” X 20”
4 14048-00 CLAMP, 9/16 COATED
20 18518-00 CAP, W/DIPSTICK
5 14157-00 CLAMP, PLASTIC HOSE
21 73722-12 JACK, HYDRAULIC 2 TON
6 14823-00 PIN, 3/8 HITCH
SPACER, 2.50 OD X 1.56 ID X
7 15015 BOLT, 1/2 X 2 HEX HD 22 74814-12
0.25
8 15030 WASHER, 1/4 FLAT 23 74981-12 PLATE, JACK MOUNT
NUT, 1/2 CENTERLOCK GR8 24 75152-12 WELDMENT, CHIPPER BASE
9 15049
ZP
25 75560-12 WELDMENT, OIL RESERVOIR
10 15076 BOLT, 3/8 X 1 THREAD CUT
ADAPTER, -10MORING/-8MJIC
11 15154 BOLT, 5/16 X 2-1/2 HEX 26 16067
45 DEG
12 15250 WASHER, 5/16 FLAT ADAPTER, -10 O-RING/.75 90
27 36017-00
BEADED HOSE

8 INCH TURNTABLE CHIPPER Page 7

Page 8
47
48

15 7
14 41
31
27 5 29
14 30
12
40
1
35 45
24
12

20 19 46
42
12
15
TURNTABLE ASSEMBLY (B)

17

7 3
13
25
39 28
16 26
8
33
2 18
7 44
16 33
4
21
15 32

8 INCH TURNTABLE CHIPPER

7 8
43 48
38 49 51
50
7
11 36
52
7 22 9 6
34
7 15 17
15 23
15 44
10 7
7
37

7
FUEL TANK,
VIN: 0 - 5VJAA00149W001992
09/09
 TURNTABLE ASSEMBLY (B) 26 36522-00 TANK, 9.5 GAL. ROTOMOLDED FUEL
ITEM PART NUMBER DESCRIPTION 27 36015-00 PUMP, PBCW HI/LO .646 DISP.
09/09

BOLT, 3/8 NC X 2-1/4 HEX HD GR5 28 18526-00 PULLEY, 7.5 OD X 1/2 IN BORE
1 0103-0711-00
ZP FITTING, TANK VENT (CH8670H)
36691-00
2 0103-0848 BOLT, 3/8 NC X 5-1/2 GR5 HONDA
29
3 0104-0076-00 SCREW, 1/4-20 X 3/8 SET PLUG, TANK VENT (CH8993H)
36690-00
4 0313-0561-00 TUBE, .875 X .657 X 1.50 BRIGGS & STRATTON
5 14637-00 IDLER, 3.1 IN AB BELT 30 41158 TUBE, SPACER
6 15005 BOLT, 3/8 NC X 3/4 HEX HD GR5 ZP 31 69239 SPACER, IDLER PIVOT
7 15031 WASHER, 3/8 FLAT 32 71105 SPACER, .875 X .81
8 15034 1/2 FLAT 33 71106 SPACER, .75 X 1.25
9 15049 NUT, 1/2 CENTERLOCK GR8 ZP 34 72511 SPACER, .63 X 3.75
10 15051 NUT, 3/8 SERR FLANGE 35 36694-00 FITTING, TANK FUEL PICK-UP TUBE
11 15205 BOLT, 3/8 NC X 5 HEX HD 36 75200-12 WELDMENT, BELT IDLER
12 15250 WASHER, 5/16 FLAT 37 75204-12 ANGLE, IDLER BRACKET
13 15301 BOLT, 5/16 X 1 CRG 38 75205-12 ANGLE, IDLER BRACKET
14 15356 NUT, 5/16 NYLOCK 39 75206-12 WELDMENT, PUMP MOUNT
15 15388 NUT, 3/8 NYLOCK 40 75208-12 WELDMENT, IDLER MOUNT
16 15394 BOLT, 1/2 X 5 HEX HD 41 75209-12 PLATE, IDLER MOUNT
17 15436 BOLT, 5/16 X 1-1/4 HEX HD 42 75211-00 SPACER, 1/2 OD X 14 GA. X .49

8 INCH TURNTABLE CHIPPER

18 16230 PULLEY, 5.0 X 2.5 IN IDLER 43 75212-00 SPACER, 5/8 OD X 11 GA. X 4.32
19 36689-00 GROMMET, TANK FITTING 44 18982-00 DECAL, UNLEADED GASOLINE
1-1/4 IN HOSE CLAMP / 2-1/2 IN 45 36695-00 GAUGE, FUEL LEVEL KELCH 100
20 16602
HOSE 46 36696-00 GROMMET, KELCH 100 GAUGE
21 16786 ABSORBER, IDLER SHOCK 47 73079 HOSE, 38 IN FUEL LINE
22 17415 SPRING, LOCK COMPRESSION 48 16378 CLAMP, 15/32 SPRING
23 17416 I-BOLT, 3/8 X 2 49 18545-00 GAUGE, FUEL MECHANICAL
24 17692 SPRING, BLOWER DRIVE 50 18050-00 BARB, 1/4 FPT X 1/4 HOSE
CAP, FUEL TANK SEALED (CH8670H) 51 18044-00 CAP, FUEL
36692-00
HONDA 52 75162-35 WELDMENT, FUEL TANK
25
CAP, FUEL TANK VENTED (CH8993H)
36693-00
BRIGGS & STRATTON
TURNTABLE ASSEMBLY (B)

Page 9
Page 10
31 25
14

13
9 44
45
12
25
29 51
28
53 17 14
43 24
37 38
36 47 3
1
DISK HOUSING ASSEMBLY (A)

12 39
7
28 10

8 11 18
50
41
46
12 14

8 INCH TURNTABLE CHIPPER

16 42 48

14 4 32
40 56
52 15 33
22 3
23 30
20 55 19
34
26 54
15
11 27
5 2
20 12
23
24 49
6 21
9
35
09/09
 DISK HOUSING ASSEMBLY (A) 30 15828-00 RIVET, AL BLIND 1/4 X 3/4 DOME
PART 31 16460 CAP, LARGE SHAFT
ITEM DESCRIPTION
NUMBER
09/09

32 16553 BEARING, 1-3/4” 4 BOLT FLANGE

1 12174 DECAL, SHIELD DANGER 33 16588 FILTER, SPIN ON
2 12455 SHEAVE, 3B 12.4 SK 34 16698 SPRING, 1/2 X 2.00 LG
3 12615 ADAPTER, -8MORING/-8MJIC 35 17248 BUSHING, 1-3/4 SK
4 14324-00 SWITCH, MOMENTARY PUSHBUTTON 36 18290-00 PIN, ROLL 3/16 X 1”
5 14635-00 SPACER, .50 X 1.00” 37 18527-00 ASSEMBLY, SA-1987 VALVE
6 14636-00 NYLON ROLLER, 0.5 X 1.00 X 1.00” 38 18607-00 STRAP, 7-1/2” RED TIE
7 15001 BOLT, 1/4 X 3/4” HEX HD 39 18608-00 STRAP, 7-1/2” BLUE TIE
8 15014 BOLT, 1/2 X 1-1/2” HEX HD 40 18549-00 CLAMP, CABLE MOUNT
9 15015 BOLT, 1/2 X 2” HEX HD 41 41287 ADAPTER, -8MORING/-8MJIC 90 DEG
10 15016 BOLT, 1/2 X 3-1/2” HEX HD 42 45885-00 SPACER, .75 X 2.06”
11 15030 WASHER, 1/4” FLAT 43 71132-12 PLATE, CHIPPER BOTTOM
12 15034 WASHER, 1/2” FLAT 44 71140 BEARING BRACKET, RIGHT
13 15043 NUT, 1/2” HEX NC ZP 45 71280 COLLER, CHIPPER LOCK
14 15049 NUT, 1/2” CENTERLOCK GRB ZP 46 71339 WELDMENT, REAR GUARD SUPPORT
15 15053 NUT, 1/4” SERR FLANGE 47 72173-12 SPACER, CHIPPER ANVIL
16 15058 BOLT, CARR 3/8 X 1-1/2” GR5 NC ZP 48 73242-12 BRACKET, SENSOR PICKUP
17 15116 BOLT, 3/8 X 2-1/2 GR5 HHCS ZP 49 74555-12 WELDMENT, SPACER 2.00 X 2.55
18 15124 BOLT, 5/16 X 3-1/2” HEX

8 INCH TURNTABLE CHIPPER

50 18549 CLAMP, CABLE MOUNT
19 15131 SCREW, 5/16 X 5/8” SQ HD SET 51 75154-35 WELDMENT, CHIPPER BOTTOM
20 15214 BOLT, 1/4 X 1-1/4” G5 ZP HCS WELDMENT, CHIPPER BASE
75157-12
21 15250 WASHER, 5/16 FLAT 52 (SUPERCEDED BY 75177-12)
22 15342 BOLT, 1/4 X 1-1/2” HCS G5 ZP 75177-12 WELDMENT, ENGINE BASE
23 15355 NUT, 1/4” NYLOCK 53 75175-12 HANDLE, ENGAGEMENT
24 15356 NUT, 5/16 NYLOCK 54 75176-12 WELDMENT, SHAFT ENGAGEMENT ARM
25 15388 NUT, 3/8” NYLOCK 55 16922 ELEMENT, HYDRAULIC FILTER
26 15403 BOLT, 5/16 X 1-3/4” HEX 56 15097 WASHER, 1/2 SAE FLAT
27 15440 KEY, 3/8 X 2.0” SQ
28 15481 STUD, 1/2 X 3” THREADED
29 15775-00 NUT, 5/8-32
DISK HOUSING ASSEMBLY (A)

Page 11
DISK HOUSING ASSEMBLY (B) 09/09

2
3

11

6
10

12

15
14

9
7
13

18 5

19

20

17

VIN: 5VJAA00119W001756 - CURRENT

23

21

24

16 22

VIN: 0 - 5VJAA00119W001755

Page 12 8 INCH TURNTABLE CHIPPER

09/09 DISK HOUSING ASSEMBLY (B)

DISK HOUSING ASSEMBLY (B)

ITEM PART NUMBER DESCRIPTION
1 12169 DECAL, KNIFE ACCESS
2 12172 DECAL, PROTECTION
3 12173 DECAL, DISCHARGE
4 15015 BOLT, 1/2 X 2” HEX HD
6 15034 WASHER, 1/2” FLAT
8 15375 PIN, 1/8 X 1” COTTER
17836 DECAL, BEARCAT PICTURE
10
18665-00 DECAL, CRARY BEARCAT (EURO MODELS)
11 17838 DECAL, MADE IN USA
36042-00 DECAL, MODEL CH8670H
12
36043-00 DECAL, MODEL CH8993H
13 71123 PADDLE, BIG CHIPPER
14 71150 WELDMENT, TOP CHIPPER HOUSING
15 71329 SHAFT, CHIPPER TOP PIVOT
73732-00 ASSEMBLY, BIG CHIPPER DISK (INCLUDES THE FOLLOWING:)
7 15049 NUT, 1/2” CENTERLOCK GRB ZP
5 15092 BOLT, 1/2 x 2-1/2 HEX HD
9 71149 WELDMENT, CHIPPER ROTOR SHAFT
16 71121 DISK, BIG CHIPPER
76287-00 ASSY., 9” CHIPPER DISK (INCLUDES THE FOLLOWING:)
7 15049 NUT, 1/2” CENTERLOCK GRB ZP
5 15092 BOLT, 1/2 x 2-1/2 HEX HD
9 71149 WELDMENT, CHIPPER ROTOR SHAFT
17 76286-00 DISK, 9 INCH CHIPPER
18 15833-00 BOLT, M16 X 2.0 X 30 HEX HD W/PATCH
19 15770-00 WASHER, SAE HARDENED
20 76112-00 BLADE, BIG CHIPPER
21 15762-00 WASHER, 1/2 GR8 SAE FLAT
22 15767-00 CAPSCREW,1/2X2-1/4 FLATHEAD (ASTM F835)
23 15772-00 LOCKNUT, 1/2-13 SECURITY
24 71122 BLADE, BIG CHIPPER

8 INCH TURNTABLE CHIPPER Page 13

ENGINE ASSEMBLY (670 cc HONDA) CH8670H 09/09

1
5
6

18

7
12 2
20
10 14
11
4
13
18

19
8 16
11
17
10

15
3
9

21

670 CC ENGINE ASSEMBLY

ITEM PART NUMBER DESCRIPTION 11 15250 WASHER, 5/16 FLAT
1 13825-00 ENGINE, HONDA 12 15388 NUT, 3/8” NYLOCK
2 13858-00 KIT, HONDA MUFFLER 13 16552 BUSHING 1-7/16 SD
3 14323-00 ENGINE KILL WIRE ASSY 14 16559 BELT, 3B83 BANDED
HOSE ASM, CRANKCASE CABLE, 66” POSITIVE
4 14373-00 15 18278-00
DRAIN BATTERY
5 14623-00 WIRE IGNITION SPLICE 16 18277-00 BELT, BX44
CONNECTOR, 1/4” QD 17 18450-00 SHEAVE, 4B5_2 SD
6 14625-00
MALE WELDMENT, BELT
18 74516-12
CABLE, 50” NEGATIVE KICKER
7 14629-00
(R/R) 19 76217-12 PLATE, ENGINE MOUNT
BOLT, 5/16 -24 X 3/4” GR5 BOLT, 5/16 X 1 NF HEX
8 15381 20 15755
HHCS ZP HD
BOLT, 3/8 NC X 2 GR5 SETSCREW, 1/2 X 3 SQ
9 15008 21 15285
HEX HD HD 1/2 DOG PT
10 15031 WASHER, 3/8 FLAT

Page 14 8 INCH TURNTABLE CHIPPER

 09/09 CH8993H ENGINE ASSEMBLY (993 cc B&S)
1

18
20

21

9 23
9
3 22
6
4
10
13
9 17

5 27

14
25
26
11 9
23
24 7

19 9
15
12
2
16

993 CC ENGINE ASSEMBLY CABLE, 66” POSITIVE

16 18278-00
PART BATTERY
ITEM DESCRIPTION
NUMBER 17 18450-00 SHEAVE, 4B5_2 SD
HOSE ASSY., CRANKCASE ENGINE, 35 HP BRIGGS
1 14373-00 18 18520-00
DRAIN HORIZ.
2 14323-00 ENGINE KILL WIRE ASSY 19 18539-00 MUFFLER, BRIGGS 35 HP
3 18605-00 WIRE, IGNITION SPLICE GUARD, WIRE FLYWHEEL
20 18540-00
4 14625-00 CONNECTOR, 1/4” QD MALE BRIGGS
5 14629-00 CABLE, 50” NEGATIVE (R/R) SCREW, WIRE FLYWHEEL
21 18541-00
GUARD
6 15755-00 BOLT, 5/16 X 1 NF HEX HD
NUT, WIRE FLYWHEEL
7 15031 WASHER, 3/8 FLAT 22 18542-00
GUARD
8 15089 NUT, 1/2 HEX JAM
23 74516-12 WELDMENT, BELT KICKER
9 15250 WASHER, 5/16 FLAT
PLATE, ENGINE MOUNT
10 15356 NUT, 5/16 NYLOCK 75160-12
(SUPERCEDED BY 76217-12)
24
11 15388 NUT, 3/8” NYLOCK WELDMENT, ENGINE MOUNT
76217-12
BOLT, 5/16-18 X 2-1/4 GR5 PLATE
12 15754-00
HCPS 25 75180-12 WELDMENT, SHIELD HEAT
13 16552 BUSHING, 1-7/16 SD BOLT, 5/16 -24 X 3/4” GR5
26 15381
14 16559 BELT, 3B83 BANDED HHCS ZP
15 18277-00 BELT, B X 44 SETSCREW, 1/2 X 3 SQ HD
27 15285
1/2 DOG PT

8 INCH TURNTABLE CHIPPER Page 15

SWITCH BOX ASSEMBLY 09/09

15
Chute end of 7
harness
16
9
11
6
10
8
17
6
5 6

1
4
2 12
3
8
Forward sensor
feed direction 13
(18472-00) 6
2
14
Reverse sensor feed
direction (18472-00)

ASSEMBLY, SWITCH BOX (75186-00)

ITEM PART NUMBER DESCRIPTION
1 12620 SPRING, CONTROL BAR
2 12621 WASHER, .515” ID X 1.50” OD, UHMW SPACER
3 12622 WASHER, 5/16” SPRING
4 15097 WASHER, 1/2” SAE FLAT ZP
5 15219 BOLT, 5/16” X 1” HHCS NC GR5 ZP
6 15250 WASHER, 5/16” FLAT ZP
7 15344 BOLT, 1/4” X 1/2” SERRATED FLANGE GR5 ZP
8 15356 NUT, 5/16” NE NYLOCK ZP
9 15436 BOLT, 5/16” X 1-1/4” HHCS NC GR5 ZP
10 18548-00 ROLLER, .75” OD X .502” ID X .440”, NYLON
11 69126 SPACER, IDLER PIVOT
12 73064 SPACER, .50” X .775”
13 75139-12 WELDMENT, SWITCH BOX
14 75140-12 BAR, SWITCH CONTROL
15 75141-12 COVER, CONTROL BOX
16 75184-12 LINK, DETENT
17 75185-00 SPACER, .50” OD X .35” ID X .47”

Page 16 8 INCH TURNTABLE CHIPPER

 09/09 FEED ROLLER HOUSING ASSY (A)

16 9
8 22
15 17
24 12 19
5 7

1
9 15 13

10
20
4
3
6
21
25
18

11
14

9 23
7
27 26

FEED ROLLER HOUSING ASSEMBLY (A)

PART 14 15478 BOLT, 1/2 X 1-3/4 HEX HD
ITEM DESCRIPTION
NUMBER
15 15498 KEY, 5/16 X 1-3/4 SQ
1 12504-00 SPRING, EXTENSION
16 15502 EYEBOLT, 1/2 X 2 IN.
2 12530 LANYARD, NYLON
17 16586 MOTOR, 45 CU IN HYDRAULIC
3 15001 BOLT, 1/4 X 3/4 HEX HD
18 16682 BEARING, 1-1/4 2 BOLT FLANGE
4 15006 BOLT, 3/8 NC X 1 GR5 CAPSCW ZP
19 16683 COUPLER, 1.25” SHAFT
5 15015 BOLT, 1/2 X 2 HEX HD
WEAR PAD, STD. SPRING HD
6 15031 WASHER, 3/8 FLAT 20 17434
FRONT
7 15034 WASHER, 1/2 FLAT 21 17879 PIN, 3/8 X 1-1/2 SNAP
8 15043 NUT, 1/2 HEX 22 70534 SPACER, .75 X .62
9 15049 NUT, 1/2 CENTERLOCK GR8 ZP 23 71298 WELDMENT, TOP GRAB ROLLER
10 15282 BOLT, 5/16 X 1-1/2 HEX 24 71304 WELDMENT, ROLLER SIDE
11 15355 NUT, 1/4 NYLOCK 25 71335 SHIELD, COUPLER
12 15356 NUT, 5/16 NYLOCK 26 73248 BEARING, SLIDE
13 15461 SETSCREW, 3/8-16 X 1/2 SET 27 73249 SPACER, .75 OD X .37

8 INCH TURNTABLE CHIPPER Page 17

FEED ROLLER HOUSING ASSY. (B) 09/09

14
26
23

7
1
21
13

6
8
20 12

13 24

7 18 5

4 27

3
11

8
22
16

17 9
10
19

25

Page 18 8 INCH TURNTABLE CHIPPER

09/09 FEED ROLLER HOUSING ASSY (B)

FEED ROLLER HOUSING ASSEMBLY (B)

ITEM PART NUMBER DESCRIPTION
1 36261-00 BUMPER, 1” O.D W/1/4” STUD
2 12250 DECAL, CHECK BOLTS
3 17320 STRAP, NYLON TIE
4 14048-00 CLAMP, 9/16 COATED
5 14302-00 DECAL, CHIPPER ENGAGEMENT
6 15006 BOLT, 3/8 NC X 1 GR5 CAPSCW ZP
7 15030 WASHER, 1/4 FLAT
8 15031 WASHER, 3/8 FLAT
9 15043 NUT, 1/2 HEX
10 15049 NUT, 1/2 CENTERLOCK GRB ZP
11 15058 BOLT, 3/8 X 1-1/2 CRG
12 15378 BOLT, 3/8 X 1-1/4 CRG
13 15179 BOLT, 1/4 X 1/2 HCS G5 ZP
14 15355 NUT, 1/4 NYLOCK
15 15364 BOLT, 3/8 NC X 1-1/4 HEX HD
16 15388 NUT, 3/8” NYLOCK
17 15502 EYEBOLT, 1/2 X 2 IN.
18 15197 BOLT, 1/4 X 2-1/4 HEX HD
19 14048-00 CLAMP, 9/16 COATED
20 36258-00 CONTROLLER, PLUS 1 CHIPPER
21 15214 BOLT, 1/4 X 1-1/4 G5 ZP HCS
22 18983-00 DECAL, CRUSHING ISO
23 71334-35 WELDMENT, TOP ROLLER COVER
24 73247-35 WELDMENT, ROLLER SUPPORT
25 36353-00 HARNESS, 8” GAS- PLUS 1
26 75961-12 ENCLOSURE, PLUS 1 MOUNT
27 36391-00 PLUG, JUMPER HARNESS

8 INCH TURNTABLE CHIPPER Page 19

PANEL ASSEMBLY 09/09

3
8
7
15

18
9

6 13
2

4 1
17 11
11
5

7
6 3 12

10
16 9
7 9
7
14
6

PANEL ASSEMBLY 10 15397 NUT, #10X24 NYLOCK

PART SCREW, #10X24X1/2 PAN
ITEM DESCRIPTION 11 15423
NUMBER PHP ZP
0125-0060- LATCH, FLEXIBLE 18114-00 DECAL, ECHO LOGO
1 12
00 RUBBER 18664-00 DECAL, CRARY LOGO
2 13904-00 GROMMET, RUBBER 13 18556-00 DECAL, FEED SPEED
3 15003 BOLT, 5/16 X 3/4” HEX HD WELDMENT, SHIELD
4 15034 WASHER, 1/2” FLAT 14 74512-12
FRONT
NUT, 1/2” CENTERLOCK 15 74536-12 WELDMENT, ENGINE TIE
5 15049
GRB ZP WELDMENT, SHIELD
6 15219 BOLT, 5/16 X 1” HEX HD 16 75167-12
REAR
7 15250 WASHER, 5/16” FLAT 17 75233-12 SHIELD, HYD PUMP
8 15301 BOLT, 5/16 X 1” CRG BOLT, 1/2” X 1/1/2” HEX
18 15014
9 15356 NUT, 5/16” NYLOCK HD

Page 20 8 INCH TURNTABLE CHIPPER

09/09 BRAKE MOUNT ASSEMBLY

5
7
7 12
1

11
13 3
4
8
10 6

2
11
9

3
14

6
3
4

BRAKE MOUNT ASSEMBLY

ITEM PART NUMBER DESCRIPTION
1 14076-00 GRIP, CLUTCH HANDLE
2 15001 BOLT, 1/4 X 3/4 HEX HD
3 15250 WASHER, 5/16 FLAT
4 15300 BOLT, 5/16 X 5/8 HEX HD
5 15355 NUT, 1/4 NYLOCK
6 15356 NUT, 5/16 NYLOCK
7 15403 BOLT, 5/16 X 1-3/4 HEX
8 17692 SPRING, BLOWER DRIVE
9 18273-00 CALIPER, 210M BRAKE
10 18606-00 DECAL, BRAKE
11 74048-00 TUBE, 1/2” O.D. X 1.00
12 74407-12 HANDLE, BRAKE
13 74408-12 COVER, BRAKE
14 74563-12 WELDMENT, BRAKE MOUNT

8 INCH TURNTABLE CHIPPER Page 21

HITCH ASSEMBLY 09/09

12
10
8

5 7
3
2 SNAP RING
4 INCLUDED

2
11
6
9

HITCH ASSEMBLY (75487-00)

ITEM PART NUMBER DESCRIPTION
1 15021 BOLT, 5/8-11 X 4-1/2 HEX GR5
2 15031 WASHER, 3/8 FLAT
3 15035 WASHER, 5/8 FLAT
4 15050 NUT, 5/8” CENTERLOCK
5 15274 BOLT, 3/8 NC X 4-1/2 HEX HD
6 15388 NUT, 3/8” NYLOCK
7 16616 JACK, PIVOTING TONGUE
8 16875 DECAL, HITCH LOAD
9 14381-00 CHAIN, SAFETY, 5000 LB W/LATCH
10 18261-00 DECAL, DISCHARGE LOCK
11 18882-00 COUPLER, 2 IN 10,000 LB
12 75489-12 WELDMENT, HITCH POLE W/PLATE

Page 22 8 INCH TURNTABLE CHIPPER

09/09 HITCH ASSEMBLY (EURO)

2
1

3
2

HITCH ASSEMBLY
ITEM PART NUMBER DESCRIPTION
1 14583-00 COUPLING, SURGE WITH JOCKEY WHEEL
2 15034 WASHER, 1/2” FLAT ZP
3 15049 NUT, 1/2” CENTERLOCK GRB ZP
4 15174 BOLT, 1/2 X 4 HEX CPS G5 ZP
5 74325-12 TUBE, CHIPPER HITCH

8 INCH TURNTABLE CHIPPER Page 23

CHUTE ASSEMBLY 09/09

16
29
13
1 12
14

13 30 6

20
14
1

2 14
24 22
13
5

4 3 23
11
16 21 11
19
7 10
18 18

9 17

27

25 8
26

15
28

Page 24 8 INCH TURNTABLE CHIPPER

09/09 CHUTE ASSEMBLY

ASSEMBLY, CHUTE HYDRAULIC FEED (75256-00)

ITEM PART NUMBER DESCRIPTION QTY
1 0111-0058-00 RIVET, 1/4” X 1/2” DOME HEAD.BLIND SS 3
2 12175 DECAL, INLET AND DISCHARGE 2
3 12250 DECAL, CHECK BOLTS 1
4 12614 CONTAINER, INSTRUCTION MANUAL 1
5 12747 DECAL, FEED POSITION 1
6 12748 DECAL, FEED POSITION 1
7 14942-00 DECAL, MULTILINGUAL MANUAL 1
8 15006 BOLT, 3/8” X 1” HHCS GR5 ZP 4
9 15031 WASHER, 3/8” FLAT ZP 8
10 15057 BOLT, 3/8 X 1” CRG 5
11 15129 WASHER, 5/8” SAE FLAT ZP 8
12 15219 BOLT, 5/16” X 1” HHCS NC GR5 ZP 1
13 15250 WASHER, 5/16” FLAT ZP 6
14 15356 NUT, 5/16” NE NYLOCK ZP 7
15 15364 BOLT, 3/8” X 1-1/4” HHCS GR5 ZP 3
16 15367 BOLT, 5/16” X 3/4” CARRIAGE NC ZP 6
17 15375 PIN, 1/8” X 1” COTTER ZP 2
18 15388 NUT, 3/8” NE NYLOCK ZP 12
19 15497 RIVET, 1/4” X 1/2” DOME HEAD.BLIND SS 4
20 17320 STRAP, NYLON TIE 4
21 17897 BEARING, 5/8” SIDE FLANGE MOUNT 2
22 18549-00 CLAMP, CABLE MOUNT 3
23 69126 SPACER, IDLER PIVOT 1
24 71191-35 WELDMENT, BIG CHIPPER CHUTE 1
25 71352 WELDMENT, CONTROL ARM 1
26 71492-00 HINGE, EXTENSION TRAY 1
27 71526 WELDMENT, CONTROL PIVOT 1
28 72660-12 CHUTE EXTENSION TRAY WELDMENT 1
29 75186-00 ASSEMBLY, SWITCH BOX 1
30 75207-12 MOUNT, SWITCH BOX 1

8 INCH TURNTABLE CHIPPER Page 25

 11

Page 26
9
36
49
24
20

51 19
34 23 4

50
20
34 23
51 24 43
15
CHUTE ASSEMBLY (EURO)

31 7 27
15 16
3 1
23
20
37 48

38 37
5 29
26 20 40

2 23
46 23
8 14 23

8 INCH TURNTABLE CHIPPER

39 23
10 20
45 17
13 47
12 20
28
26
37
13 20
17 12
41 6
26
18 21
44
33
25 26 20 23

20
28
37
09/09

42 20
21
30
 75257-00, CHUTE ASSEMBLY 29 15497 RIVET, 1/4 X 1/2 DOME HD. BLIND (SS)
PART 30 16698 SPRING, 1/2 X 2.00 LG
ITEM DESCRIPTION
NUMBER
31 16753 DECAL, CE
1 12175 DECAL, INLET AND DISCHARGE
09/09

32 17320 STRAP, NYLON TIE

2 12614 CONTAINER, INTRUMENT MANUAL
33 17897 BEARING, 5/8 FLANGE
3 12747 DECAL, FEED POSITION
34 18549-00 CLAMP, CABLE MOUNT
4 12748 DECAL, FEED POSITION
35 18553-00 HARNESS, SAFETY BAR (NOT SHOWN)
13711-00 DECAL, MANUAL BOX
5 36 18555-00 DECAL, RESET/OVERRIDE
14942-00 DECAL, MULTILINGUAL MANUAL
37 69126 SPACER, IDLER PIVOT
6 13904-00 GROMMET, RUBBER
38 71191-35 WELDMENT, BIG CHIPPER CHUTE
7 14048-00 CLAMP, 9/16 COATED
39 71492-12 HINGE, EXTENSION TRAY
8 14520-00 GRIP, 1.219 X 9.75
40 74155-35 WELDMENT, KNEEBAR
9 36356-00 LED, TRI-COLOR 12V 3-TERM BASE
41 74157-12 LINK, PARALLEL
10 14864-00 SWITCH, N/C MOMENTARY PLUNGER
42 74161-12 WELDMENT, PIVOT TUBE
11 14865-00 SWITCH, N/O MOMENTARY PLUNGER
43 74166-12 WELDMENT, EXTENSION TRAY
12 15006 BOLT, 3/8 NC X 1” GR5 CAPSCW ZP
44 74167-12 SHIELD, KNEEBAR SWITCH
13 15031 WASHER, 3/8” FLAT
45 74169-12 WELDMENT, CONTROL ARM
14 15051 NUT, 3/8” SERR FLANGE
46 74171-12 WELDMENT, CONTROL PIVOT
15 15057 BOLT, 3/8 X 1” CRG
47 74203-12 BRACKET, SWITCH
16 15058 BOLT, 3/8 X 1-1/2” CRG

8 INCH TURNTABLE CHIPPER

48 74222-12 LOCK, SAFETY BAR
17 15129 WASHER, 5/8” SAE FLAT
49 75186-00 ASSEMBLY, SWITCH BOX
18 15176 SCREW, 11/32 X 7/8” HWH AAB THREAD
50 75243-12 MOUNT, SWITCH BOX
19 15219 BOLT, 5/16 X 1” HEX HD
51 0111-0058-00 RIVET, 1/4 X 3/4 ST POP
20 15250 WASHER, 5/16” FLAT
21 15301 BOLT, 5/16 X 1” CRG
22 15349 BOLT, 5/16 X 7/8” CRG
23 15356 NUT, 5/16” NYLOCK
24 15367 BOLT, 5/16 X 3/4” CRG
25 15375 PIN, 1/8 X 1” COTTER
26 15388 NUT, 3/8” NYLOCK
27 15398 BOLT, 5/16 X 1-1/4 CRG
28 15409 WASHER, 5/16” NYLON
CHUTE ASSEMBLY (EURO)

Page 27
DISCHARGE CHUTE ASSEMBLY 09/09
4 5
21
3
11

20

12

18 7
8
2

13 17
6
9
19

1
15 14

16 10
11

72589, DISCHARGE ASSEMBLY

ITEM PART NUMBER DESCRIPTION
1 12173 DECAL, DISCHARGE
2 15006 FITTING, 1/4 SELF-TAP GREASE
3 15031 WASHER, 3/8” FLAT
4 15057 BOLT, 3/8 X 1” CRG
5 15060 BOLT, 3/8 X 2” CRG
6 15154 BOLT, 5/16 X 2-1/2” HEX
7 15250 WASHER, 5/16” FLAT
8 15356 NUT, 5/16” NYLOCK
9 15364 BOLT, 3/8 NC X 1-1/4” HEX HD
10 15375 PIN, 1/8 X 1” COTTER
11 15388 NUT, 3/8” NYLOCK
12 15525 KNOB, 3/8” INSERT
13 15584 WASHER, FLAT .254 X .400 X .048
14 16556 SPRING, LOCK COMPRESSION
15 71247 RING, DISCHARGE SPACER
16 71248 RING, DISCHARGE CLAMP
17 71252 LEVER, DISCHARGE LOCK
18 71253 WELDMENT, DISCHARGE LOCK PIN
19 71256 TUBE, DISCHARGE LOCK PIN
20 71705-12 WELDMENT, 8 INCH DISCHARGE TUBING
21 71704-12 CAP, 8 INCH DSICHARGE CHUTE

Page 28 8 INCH TURNTABLE CHIPPER

 09/09 HYDRAULIC HOSE ASSEMBLY

see p. 17
9
see p. 10 2
1
2

11
2

2 6

see p. 10
4 4

8
see p. 7
10
see p. 8 3
5

HYDRAULIC LAYOUT
ITEM PART NUMBER DESCRIPTION
1 11810 ADAPTER, -10MORING/-8MJIC 90 DEG
2 12615 ADAPTER, -8MORING/-8MJIC
3 12626 ADAPTER, -10MORING/-8MJIC
4 14278-00 HOSE ASSEMBLY, 8FMJIC/8FMJIC SW X 32”
5 14665-00 HOSE ASSEMBLY. 8FLHIC90 SW X 8FJIC X 54”
6 16067 ADAPTER, 45 DEG ORING TO FLARE (-10/-10)
8 36017-00 ADAPTER, -10 O-RING/.75 90 BEADED HOSE
9 18535-00 HOSE ASSEMBLY, -8FMJIC/-8MJIC 90 DEG
10 36082-00 HOSE, .75 I.D. X 18.50 IN 100R4 HYD
11 41287 ADAPTER, -8ORING/ -8MJIC 90 DEG

8 INCH TURNTABLE CHIPPER Page 29

ELECTRICAL SCHEMATIC 09/09

Page 30 8 INCH TURNTABLE CHIPPER

 09/09

PRESSURE
SWITCH
HYDRAULIC @ 2300 PSI
RESERVIOR
A

18527-00, VALVE
ASSEMBLY
2500 PSI

P
@ 1 GPM
16588, FILTER 16586,
ASSEMBLY FEED
HYD OIL ROLLER
FILTER 36015-00, 2 STAGE MOTOR

MR
16922,

80 PSI
HI/LO PUMP
REPLACEMENT

T
B

FILTER

8 INCH TURNTABLE CHIPPER

HYDRAULIC SCHEMATIC

Page 31
LIGHT HARNESS 09/09

1
2

LIGHT HARNESS
ITEM PART NUMBER DESCRIPTION
16905 HARNESS, TRAILER LIGHT
1
18570-00 HARNESS, TRAILER LIGHT (EURO & F MODELS)
2 74538-00 CONDUIT, POLY, 10’ X 1/4”

NON-EURO MODELS

LEFT SIDE:
YELLOW-BROWN

RIGHT SIDE:
GREEN-BROWN

EURO MODELS

LEFT SIDE:
YELLOW-RED-BLUE BLACK

RIGHT SIDE:
GREEN-RED-BLUE-BROWN

LICENSE PLATE

Page 32 8 INCH TURNTABLE CHIPPER

09/09 SERVICE PARTS

SERVICE PARTS

PART NUMBER DESCRIPTION

71426 CHIPPER BLADE KIT (VIN: 0 - 5VJAA00119W001755)

76293-00 CHIPPER BLADE KIT (VIN: 5VJAA00119W001756 - CURRENT )

8 INCH TURNTABLE CHIPPER Page 33

 ECHO BEAR CAT
237 NW 12th Street, West Fargo, ND 58078-0849
Phone: 701.282.5520 • Toll Free: 800.247.7335
Fax: 701.282.9522
E-mail: service@crary.com • opesales@crary.com
www.BearCatProducts.com