Scribd
Upload
9 views3 pages

Digital Tach Instructions

Uploaded by

paulsparrow26
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
Download as docx, pdf, or txt
9 views3 pages

Digital Tach Instructions

Uploaded by

paulsparrow26
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1/ 3

@jimboucher7153 on Digital Tach

A. Short press the left button to switch between total (TOTAL), subtotal (TRIP) and water temperature
gauge.

B. In the subtotal interface, press and hold the left button for 3 seconds to clear the subtotal.

C. In the total interface, press and hold the right button for 3 seconds to enter the clock setting, the hour
digit flashes, the second point does not flash, short press the right button to add 1, long press the right
button to switch to the minute second flashing, the second point does not flash, then long press Right
click to save and exit or 10 seconds of no operation to automatically save and exit or turn off the door
to save and exit. When the oil alarm symbol is displayed, switch to the TOTAL interface, press and
hold the left and right keys at the same time for 3 seconds, the oil light will be off, and the next round
of counting will start.

Light blue: turn right, 12V positive control, LCD display

Yellow/Black: Speed signal

Red: battery (normal, 12V positive)

Blue: High beam, 12V positive control, LCD display

Green/White: Water temperature signal

Green: 12V negative

Orange: Turn left, 12V positive control, LCD display

blue/white: fuel signal

Black: 12V positive

Φ4 round head

Brown/Red: Engine failure, negative control, LCD display

Gray: 6 gears, negative control, LCD display

Pink: 1 file, negative control, LCD display

Blue/Red: 2 files, negative control, LCD display

Green/Black: 3 files, negative control, LCD display


Yellow/Red: 4 gears, negative control, LCD display

Brown/white: 5 steps, negative control, LCD display

Green/Red: Neutral, Negative Control, LCD Display

red/white: positive sensor

Green: sensor negative

black/white: sensor signal

1 Background settings: enter the background with a password. (Major and Imperial backgrounds can be
set)

Press and hold the left button to power on and enter the background setting interface. P000: Password
input 6610

4C1850:

1850 represents the perimeter, long press the left button to flash, short press the left button +1, long
press the left button again to switch to the tens (0-9)

Tens digit flashes, short press the left button + 1, long press the left button again to switch to the
hundreds digit (0-9)

Hundreds digit flashes, short press the left button + 1, long press the left button again to switch to
thousand digit (0-9)

Thousands digit flashes, short press the left button +1 (0-2), long press the left button again to enter the
magnet number adjustment interface

4 means the number of magnets, short press the left button + 1, long press the left button to save. After
saving, short press the left button to enter the metric and inch interface

1-01: Metric

1-02: Inch system, long press the 1 of 001 to flash, short press the left button to switch to 2, long press
the left button to save. After saving, short press the left button to enter the speed interface

2-002: Speed 166hz=10*1000 rpm, 2-004: Speed 333hz=10*1000 rpm, long press the left button and
the number flashes, short press the left button to switch, long press the left button to save and then short
press the left button to enter the fuel interface .

3-002: Two-Line Fuel

3-003: 3rd line fuel, long press the left button and the number flashes, short press the left button to
switch, long press the left button to save and short press the left button to enter the main interface of the
instrument.

You might also like