Status indicator Add The Device-Scan QR code mode ·A QR code will prompt on phone screen and you need

Add The Device-Scan QR code mode ·A QR code will prompt on phone screen and you need to scan it with the ·Connection completed(Figure 09), tap "Done"
Brief information: Install APP Please note that only 2.4 GH Wi-Fi network is supported; Smart Camera. (the camera is about 20-30 cm away from the mobile ·It jumps to preview page (Figure 10)
During startup, red light solids means setup Download APP: scan the QR code below to download and install. ·Make sure Wi-Fi is available and connected to the Internet. phone screen). Then tap "I heard a prompt" (Figure. 07.
Product: Battery camera ·After closing the device preview page, it returns to the APP home page.
failure ·Connect the camera to the power, then system startup completed. ·If the mobile phone is not connected to Wi-Fi, please click "Connect to ·Camera is "connecting" (Figure. 08);
Wireless Encryption: WEP/WPA/WPA2 Encryption Register and login: open the " Smart Life" APP to register and login ·At this time, the connected device will appear on the APP home page
Red light blinking quickly: pairing mode
·Open "Smart Life" APP, press the'+' in the upper right corner of the main Wi-fi" (Figure 04);
Support System: Android/iOS according to the guide in the APP. (Figure 11).
Green light blinking quickly: Wi-Fi is being
screen (Figure 01); choose “Security & Video Surveillance”, click "Smart Camera" ·It will jump to the WLAN interface and connects Wi-Fi (Figure 05).
·Then you can tap directly to the device page to monitor.
connected
(Figure 02) to add camera; and then click "Next step" (Figure 03); ·If the phone is connected to Wi-Fi (Figure 06), Tap “next”；
Solid green light: working normally
Component Description: Yellow light blinking slowly (red and green light
blinking): device upgrade 01 02 03 04 05 06 07 08 09 10 11
Reset Button: Press and hold “reset” button for 5sec, reset success.
Solid white light: charging

It is recommended to insert 8-128GB high-speed Micro TF card, otherwise White light blinking: charging abnormally

it may cause failures to store, play recorded video and other malfunctions
including firmware upgrade.

Smart Life Tuya Smart

2021-08-05 16:38:22

Part list:
Battery camera × 1
Manual × 1
USB Power Cable × 1 RST
Screw Accessories Package x 1 Reset Button
USB
Charging Port Please follow the instructions in the mobile APP
Thank you for choosing Battery Camera OFF ON
Power ON/OFF (the instructions are for reference only)

TF Card
jz

FCC Statement:
Maintenance voucher of intelligent This equipment has been tested and found to comply with the limits
Add The Device-AP Mode Note for a Class B digital device, pursuant to part 15 of the FCC Rules. These
·Click "Go Connect" (Figure 15) ·Click to complete the connection (Figure 18) The name and content of the harmful substances in the product Maintenance records：
·Select "AP Mode" (Figure 12) Customer: Mobile: limits are designed to provide reasonable protection against harmful
·Go to "Smart Life-XXXX "and click Connect (Figure 16) ·Video screen (Picture 19) Recommended to install in open space without metal interference; interference in a residential installation. This equipment generates,
·Click Next (Figure 13) uses and can radiate radio frequency energy and, if not installed and
·Connecting (Figure 17) Avoid blocking from furniture , microwave oven, etc; Maintenance time： Address:
·Enter the account and password that can connect to WIFI (Figure 14) Harmful Substance used in accordance with the instructions, may cause harmful
Avoid to install in the space where the audio, video and data lines Part interference to radio communications. However, there is no
Model: Camera ID: guarantee that interference will not occur in a particular installation. lf
Name Pb Hg Cd Cr(VI) PBB PBDE Fault conditions：
are wound, and keep away from them as far as possible; this equipment does cause harmful interference to radio or television
Device store: Date of purchase: reception, which can be determined by turning the equipment off and
Install as near as possible to wireless Wi-Fi router; Housing ○ ○ ○ ○ ○ ○ Fault cause：
12 13 14 15 16 17 18 19
on, the user is encouraged to try to correct the interference by one or
When changing to the new environment, please press and hold the Board X ○ ○ ○ ○ ○ Store address: more of the following measures:
Adapter ○ ○ ○ ○ ○ ○ - Reorient or relocate the receiving antenna.
reset button for 5 seconds, then connect to the network. Troubleshooting：
Accessories○ ○ ○ ○ ○ ○ Store contact number: - ln crease the separation between the equipment and receiver.
This form is based on the provisions of SJ/T 11364。 . Connect the equipment into an outlet on a circuit different from that
Return and exchange proof： to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
2021-08-05 16:38:22
This product conforms to RoHS environmental protection requirements. At Maintenance voucher of intelligent Caution: Any changes or modifications to this device not explicitly
Date of validity： approved by manufacturer could void your authority to operate this
present, there is no mature technology in the world to replace or reduce the
equipment.
lead content in the electronic ceramics. porcelain, optical glass, steel and Customer: Mobile: This device complies with part 15 of the FCC Rules. Operation is
copper alloy. Original device ID：
subject to the following two conditions: (1)This device may not cause
Address: harmful interference, and (2)this device must accept any interference
New device ID： received, including interference that may cause undesired operation.
Model: Camera ID:
RF Exposure lnformation:
maintenance personnel signature： This equipment complies with FCC radiation exposure limits set forth
Device store: Date of purchase:
for an uncontrolled environment. This equipment should be installed
and operated with minimum distance 20cm between the radiator
Maintenance Department seal： Store address: &your body.
Store contact number: