VangEditor Usage Guide

1. If the phone's model is low, some functions of the application may not be available,
so it may bounce or may not be available when the application is executed.

2. Because it is more focused on optimization than VangPro, the update may be slower than VangPro.

3. Card verification and deck construction/storage are the main features,

and offline gaming is encouraged.

4. There are also offline support functions such as energy checkers and power calculations, so please
refer to them.

5. VangPro has the ability to move decks, so please refer to it.

 1. Press the name and the Japanese name
will be copied.

2. The dual country and type change

when a button is pressed.

3. Press and hold the effect to copy the

effect.

4. Double-click the name and search for the

card in Merucari to open the link.

- Press the card image to activate the card description window.

- If you press the card image in the description window once more, you can also change the rare.

- Rare can be switched by pressing the green button below.

- Each rare is applied to each type.

- It's different from the actual lesson,

I would appreciate it if you watch it for fun.
 1. It is possible to search whether the name and effect was
included information.

2. Type is searching for name, effect, detail type.

3. You can search cards often used through often/cycle

keywords.

4. Press TOP button, automatically moves to the upper end of

the card list.

- You can set the index you want by clicking the index button at the top.

- Press the RESET button to reset all indexes.

- You can search for the keywords you want with the SEARCH button.
 1. After trying Gacha, you can click on
the cards on the back to see what
cards came out.

2. You will get at least two R cards.

3. It is different from the actual

encapsulation rate, so I would
appreciate it if you could use it for fun.

4. When you press the card image, the

description window for that card is
activated.

- You can try the GACHA button at the bottom to simulate GACHA.

- One attempt per 10 is possible, and numbers are automatically filled.

- Compared to functions that are less frequently used,

this function has been discarded since this year due to a large amount of work.
 1. Through the Share button, the following
functions are available.

- DECK COPY: Copy Deck Code

(available for VangPro)

- DECK PASTE: Paste Deck Code

- IMAGE CAPTURE : Capture Deck List Only

(Cut incorrectly depending on some resolution)

- RECIPE COPY: Copy the deck list into a recipe

- You can add a card to the deck by clicking it in the card list.

- You can delete the card to the deck by clicking it in the deck list.

- Once you've filled up the deck, you can save it.

(If it's not enough, the alarm window will be activated to see how many are missing.)
 1. In the locked state, you can save it even if
the number of decks is insufficient.

2. When starting with the OPTION function, it

is possible to set the country and pack to
be indexed.

3. You can switch to English with language

settings.

4. The background can also be set.

(Random function will be explained later)

5. G zone function will also be explained later

6. Rare effect can be turned on/off.

- You can activate the lock state by pressing the country icon button (press again to release)

- Press the country icon button (lock disabled) to reset all decks.

- In lockdown, card addition/deletion is reversed.

 1. Press the card you want to activate the
description window.

2. Press the card image, switch to switch

to the change function.

3. After changing the desired recipe,

press card image, press the card image.

- You can change the card to any rare degree you want from the deck list.

- The prohibited list applies only basic input limits,

considering the possibility of variations and discrepancies in the update schedule.
 1. Background screen random switching function:

- After changing the setting to ON, press the area other than
the translucent block of the deck list for 1-2 seconds, and then
release it, the wallpaper changes randomly.

- If you press it longer than that, it will reset to the initial

wallpaper.

- You can change the background screen as desired image.

- You can check the same in the background card list/deck list/gacha list background.

- I'm currently working on VangPro, so I'm not adding any images.

 1. Turn the G Zone feature on, and double-click the translucent
block.

2. G Zone activat just like the image on the left.

3. You can check or delete G Zone card you put in the deck.
(Same as the existing deck)

- G Zone function is a function to check G Zone that can be checked if G Zone card is put into the deck.

- If OFF, the Power Counter/Energy Checker function can be used (to be described later)

- Double-click the translucent block on the deck list to activate it.

 1. Power and energy conversion can be switched through the
buttons at the bottom.
2. The odd-even function can be used regardless of energy and
power.
3. The E on the energy checker screen is closer to itself, and their
energy compartment is their own.
4. Double-click the number on the energy checker screen, and it
increases by 3.
5. Press the number on the energy checker screen to reset to zero.
6. The power count function allows you to set the power by
pressing each card.
7. The turn-off/initialization function allows you to organize at
once.

- It is a function that can be used only when the transcendent zone function is turned off.

- Double-click the translucent block on the deck list to activate it.

- It is a function that supports offline games.