AUVON-US-AS8012C-sms-v1.6-220420-80x135mm

Quick Guide
Attention
The purpose of this Quick Guide is to help you
understand the operation of the TENS unit much
more quickly, and the contents of the quick guide
are not a substitute for the user manual. Please
read the user manual carefully before use to un-
derstand the contraindications and warnings.
Please consult your doctor before use if you’re not
sure whether you can use this device.
Operation
Note: Do not use it while charging.
2. Connect the lead

wire to a pair of pads
1. Clean the applica-
and the device.
tion areas.
Note: Keep the unit
off.
3. Attach the pads. 4. Turn on the device.
5. Choose the con-

6. Choose mode.
nected channel.
7. Adjust intensity. 8. Set time.
9. Long press to lock/ 10. Turn off the device
unlock the screen. after massage.
11. Remove the pads, do not pull the wire.

Pad Placement Guide
Notes:
1. Do not overlap the pads.
2. Do not place the pads on the artery.
3. Only place the pads on the same side of the arm/leg.
If you want to know more details about the

mode, please read the user manual, and if
you encounter any problem during the use,
please check the user manual for “Trouble
Shooting”.
USER MANUAL
Dual Channel TENS Massager
Relaxation, Anywhere, Anytime
Model AS8012C
Device Name: TENS and Powered Muscle Stimulator

TABLE OF CONTENTS
1. Explanation of Pain ................................................ 8
2. Explanation of TENS............................................... 8
3. Standard Package................................................... 8
4. Features.................................................................. 9
5. Product Illustrations ...............................................11
6. Operating Instructions........................................... 13
6.1 How to Use................................................. 13
6.2 After Use..................................................... 17
7. Recommend Massage Points................................ 17
8. Mode Instruction ................................................... 20
8.1 Intensity Recommendation......................... 20
8.2 Time Recommendation............................... 20
8.3 Expected Feelings...................................... 21
8.4 Mode Specification...................................... 25
9. TENS Pads Holder................................................ 26
9.1 Features...................................................... 26
9.2 Instruction .................................................. 27
10.. Safety Precautions and Warnings....................... 28
10.1 Pain Management Warnings..................... 28
10.2 Prohibited Conditions................................ 28
10.3 Prohibited Individuals................................ 28
10.4 Prohibited Body Areas.............................. 28
10.5 Prohibited Activities................................... 29
10.6 Pads Precautions...................................... 29
11. . Trouble Shooting ............................................... 30
12.. Symbols.............................................................. 37
13.. Certification ........................................................ 38
14.. Customer Service............................................... 38
Email： support@iauvon.com
1. Explanation of Pain
Pain is a warning system, a way for the body to tell us
that something is wrong. Pain is important, without it, ab-
normal conditions may go undetected, causing damage
or injury to vital parts of our bodies. Even though pain
is a necessary warning signal of trauma or malfunction
in the body, nature may have gone too far in its design.
Aside from its value in diagnosis, long-lasting persistent
pain serves no useful purpose. Pain does not begin until
coded message travels to the brain where it is decoded,
analyzed, and then reacted to. The pain message travels
from the injured area along the small nerves leading to
the spinal cord. Here the message is switched to differ-
ent nerves that travel up the spinal cord to the brain. The
pain message is then interpreted, referred back and the
pain is felt.
2. Explanation of TENS
Transcutaneous Electrical Nerve Stimulation (TENS) is
a non-invasive, drug-free method of pain control. TENS
sends tiny electrical impulses through the skin to nerves
to modify your pain perception. TENS does not cure any
physiological problems, and it only helps control pain.
TENS does not work for everyone, however, for most pa-
tients, it is effective in reducing or eliminating pain, allowing
them to return to normal activities.
3. Standard Package
● AUVON® Dual Channel TENS Massager
● Pin Pads
● Pads Holder
● Pouch
● Set of Lead Wires (½ Wire)
8
● USB Cable
● User Manual
4. Features
Mechanism Technical Description
Isolated channel with independent

Dual-channel
mode and intensity
Pulse 0-150 mA at 500 ohm load each

Amplitude channel.
Wave Form Symmetrical Bi-Phasic Square
Pulse Voltage 0- 50V (Load: 500 ohm)
Power source 180mA lithium battery
Size 10.24cm(L)x5.54cm(W)x1.14cm(H)
Weight 74.9 grams.
Pulse Rate From 2-100 Hz
Pulse Width From 100-240μs microseconds
9
P1-8: TENS;
P9-16: PMS;
Modes
P17-24: MASSAGE.
2 outputs with 24 modes
Intensity 20 levels of intensity
20-minute default timer.

Adjustable between 10-90 minutes.
Increases/decreases in 10-minute
Timer intervals.
Set the timer by pressing the “T” button
and the unit will turn off when the time
is up.
A low battery indicator will show up

Low Battery
on the LCD when the battery is low.
Indicator
Operating Atmosphere Pressure :

Condition 700Hpa~1060Hpa.
There may be a +/-5% tolerance of

Remark all parameters and +/-20%tolerance
of amplitude & voltage.
10
5. Product Illustrations
10
15
11
① On/Off switch
② USB port
③ Time
④ Battery indicator
⑤ Adjustable Intensity (A Channel)
⑥ Adjustable Intensity (B Channel)
⑦ Lock
⑧ Intensity Increase/ Channel A
⑨ Intensity Decrease/ Channel A
⑩ Time Selection
⑪ Mode Selection
⑫ Sub-mode selection (" < " and " > ")
⑬ Intensity Increase/ Channel B
⑭ Intensity Decrease/ Channel B
⑮ Two Outputs Connector
12
6. Operating Instructions
6.1 How to Use
1. Clean your skin before use. Use the pads on clean

and flat areas, no sweat and no oil.
2. Connect a pair of electrode pads to one lead wire;

connect the other end of the wire to the left output of
the device. Similarly, the other pair of electrode pads
should be connected to the remaining wire end and
the right output of the device.
Note: Keep the unit off.

13
3. Attach one pair or two pairs of the electrode pads

to the massager area, such as shoulder and leg.
Note: Adding a few drops of water on the pads and

drying the pads naturally will increase their longevity.
Make sure both pads on the skin are not overlapping.
4. Turn on the device by sliding the on/off switch on

the top of the unit.
5. Press the left “V” or

" " to choose Chan-
nel A, then "A" starts
to flash. (Or Press
the right “V” or " " to
choose Channel B,
then "B" starts to flash.)
14
6. Press the "M" button

to choose 6 master
modes, and press the
"<" and ">" button to
choose sub-modes. If
"A" is flashing, it means
the mode of channel
A is selected. (If "B" is
flashing, it means the
mode of channel B is
selected).
7. Press the left “V”

or " " to increase or
decrease the intensity
of channel A. Press the
right “V” or " " to in-
crease or decrease the
intensity of channel B.
Note: The initial intensi-
ty of the selected mode
will default to the lowest
setting.
15
8. The recommended
usage time is 10-90
minutes. Press “T” on
the device can increase
the usage time for each
selected mode (10
minutes interval). The
device will automatical-
ly turn off when time is
reached.
: ~
9. Press and hold the

middle button for 3 sec-
onds to lock the screen,
3 seconds again to un-
lock the screen.
16
6.2 After Use

1. Turn off the device by sliding the on/off switch on the
top of the unit.
2. Remove lead wire pin from electrode connector by
gently twisting and pulling it out.
3. Lift a corner of the electrode pad and slowly peel it
away. Avoid touching the gel as much as possible.
DO NOT peel the electrode off by the wire.
4. Place the electrodes back into the storage bag and
reseal tightly to prevent dry-out. Store at room or cool
temperature and keep out of direct sunlight.
7. Recommend Massage Points

Neck
Modes: 6
Attach the pads on the back of
the neck. (Do not place the pads
on the left or right side of the
neck.)
Shoulder
Modes: 1-4,6-18,20,22
Attach the pad as shown on the left.
(Do not place the pad on the spine.)
17
Back
Modes:1-4，17
Attach the two pads on the sides
of the back, do not attach it on
the spine or backbone.
Waist
Modes: 1-11,19,13-16
Attach the two pads on the sides
of the lower back, do not attach it
on the spine or backbone.
Deltoid
Modes: 2,3,4,9,14,19,22
Attach one pad in front and one
behind the muscle.
Arm
Modes: 1-24
Attach the pads on both sides of
the same arm.
Elbow
Modes: 8,12,23
Attach the pads on the upper and
lower side of the same elbow.
18
Wrist
Modes: 10
Attach the pads on the upper and
lower side of the same wrist. (Do
not place the pads on the pulse.)
Hip
Modes:
1,3,4,5,6,9,13,15,19,22
Attach the pads above and below
the pain area of your hip. (NOT
on the back)
Leg
Modes: 15
Attach the pads on both sides of
the same leg.
Knee
Modes: 1,3,7,8,9,13,19,22
Attach both pads above the knee
or above and below the pain ar-
ea.
19
Calf
Modes:
1,2,3,4,7,8,9,10,11,13,
14,15 ,16,17,18,19,22
Attach both pads on the calf/
leg where you feel pain. (Do not
place electrode pads simultane-
ously to the calves of both legs.)
Ankle/Foot
Modes: 1,4,11,13,19
Attach pads per the illustration,
on the left/ on the outside of your
ankle/foot for pain. Attach the
pads per illustration on the right/
on the other side of your ankle/
foot.
8. Mode Instruction
8.1 Intensity Recommendation
It is recommended to set the intensity within 1-3 for initial
use, feel the intensity for 1-2 minutes after each intensity
increase, if the intensity makes you feel pain or uncom-
fortable, please decrease the intensity.
8.2 Time Recommendation
It is recommended to use the device for no more than 30
minutes and to stop using it when the pain is relieved.
20
8.3 Expected Feelings

Master Sub-
Program Feeling
Mode Mode
Continuous comfort-
P1
able tingling.
TENS
Comfortable tingling
For TENS, P2
and pulsing sensation.
it is used for
temporary Comfortable rhythmic
relief of pain P3
tingling.
associated
with sore Continuous comfort-
P4
and aching able tingling.
muscles in
the shoul-
Comfortable and slow
der, waist,
tingling firstly, then the
back, neck,
frequency is signifi-
upper P5
cantly increased, and it
extremi-
becomes a noticeable
ties (arm),
tingling sensation.
and lower
extremities
(leg) due to Low frequency beating
strain from P6 with a slight tingling
exercise sensation.
or normal
household
work activi- Low frequency slight
ties. beating firstly and then
P7
continuous comfort-
able tingling.
21
Low frequency slight

beating firstly and then
P8
comfortable pulsing
sensation.
Low frequency slight

P9
beating.
Low frequency beat-

P10
ing.
PMS
Beating from low fre-
For PMS, it P11 quency to a little high
is intended frequency.
to be used
to stimulate
healthy Muscle twitches at a
muscles very low frequency.
P12
in order to It feels like a tapping
improve massage.
muscle per-
formance
and restore
muscle
vitality. This program activates
the muscle in a short
P13
tingling cycle. It is
smoother than P1/P2.
22
This program gently

warms up the muscles
prior to exercise; it
feels like a rhythmic
P14
massage. Increase
intensity until you get a
strong but comfortable
muscle movement.
PMS
For PMS, it
is intended This program uses a
to be used pulse frequency appro-
to stimulate priate to fast twitching
healthy muscle fibers. It im-
muscles P15
proves their anaerobic
in order to capacity and is used
improve for improving maxi-
muscle per- mum muscle strength.
formance
and restore
muscle
vitality. This program gently
warms up the muscles
prior to exercise; it
feels like a rhythmic
P16 beating and comfort-
able tingling. Increase
intensity until you get a
strong but comfortable
muscle movement.
23
Comfortable tingling
from shallow to deep
P17
with 3-4 seconds
pause.
Comfortable pulsing
sensation from shal-
P18
low to deep with 3-4
seconds pause.
Variable comfortable
MASSAGE tingling, slight beating
P19
and scrapeing sensa-
tion.
For Mas-
sage, it is Comfortable slight
used to get tingling from shallow to
P20
your mus- deep with 3-4 seconds
cle relax pause.
anywhere
anytime Comfortable tingling
and bring and pulsing sensation
you ultimate P21 from shallow to more
relaxation. deep with 3-4 seconds
pause.
Rhythmic continuous
P22
beating.
Rhythmic scrapeing
P23
sensation.
Quick slight beating

P24 first, then comfortable
tingling.
24
8.4 Mode Specification

Number Type of
Pulse Rate Pulse Width
of Mode Mode
1 TENS 81~89 200
2 TENS 51~59 100
3 TENS 95~100 150
4 TENS 75~85 150
5 TENS 10~100 240
6 TENS 2 240
7 TENS 2/95~100 200/150
8 TENS 2/40~50 200/150
9 PMS 40~45 240
10 PMS 35~40 240
11 PMS 2~130 240
12 PMS 38~45 240
13 PMS 39~46 240
14 PMS 6~10 240
15 PMS 40~48 240
16 PMS 2~45 240
17 MASSAGE 5 200
18 MASSAGE 7 240
19 MASSAGE 3~22 200
20 MASSAGE 14 240
21 MASSAGE 35~100 240
22 MASSAGE 100 200
23 MASSAGE 50 240
24 MASSAGE 5/60 200
25
9. TENS Pads Holder

9.1 Features
High quality
ABS material to
make sure you
use it safely.
Wide
compatibility
for patches in
different sizes.
The salient points are designed specially to

lessen damage to the pads.
26
9.2 Instruction
Step 1 Stick the electrode patches on the holder to

avoid getting dust.
Step 2
Wind the thread around the holder for easy
use as the picture shown.
27
10. Safety Precautions and Warnings

10.1 Pain Management Warnings
Pain is a very important signal to tell us something is
wrong with our body.
If you have received medical or physical therapy for pain,
please consult your physician before using this device to
confirm if you can use this pain relief device.
This device may cause fatal heart rhythm disturbances in
certain susceptible people, and if you have recently had
surgery, the stimulation may disrupt the healing process.
If your pain does not improve after using this machine,
becomes severe chronic pain or severe pain, stop using
this device and consult your doctor.
10.2 Prohibited Conditions
● The wire is broken
● The gel is damaged
● The lead wire connection port is broken
● The device is broken
● Battery leakage
10.3 Prohibited Individuals
● Pregnant women, infants and children
● People who do not have the ability to express their
thoughts or intentions
● People who are incapable of operating the device by
themselves
● People who have a tendency to bleed internally after
an injury or fracture
● Patients with suspected or confirmed heart disease or
epilepsy
10.4 Prohibited Body Areas
● Any part of the head or face
● Any part of the throat and its vicinity, which can cause
28
severe muscle spasms and lead to chocking

● The heart and its vicinity or genital area
● Open wounds or rash areas
● Swollen, red, infected or inflamed areas
● Areas of skin erosion (caused by varicose veins, phle-
bitis, thrombophlebitis, and thrombosis)
● Sites on or near cancerous lesions
● Skin that lack normal sensation
Do not use the pads in the following two areas at the
simultaneously, because the current may cause heart
rhythm disorders, or even cause death.
● Both sides of the chest (left and right or front and back)
or through chest
● Calves of both legs
● Bottom of both legs
10.5 Prohibited Activities
● Shower or bath
● Sleeping
● Driving or operating machines
● Any activities that cannot be interfered
10.6 Pads Precautions
● Do not bend or fold the pads because it may damage gel.
● Only place the pads on the skin or the pad holder.
● Do not apply ointment or any solvent to the pads or the
area where the pads are to be used.
● Do not share pads with other or it may cause skin irri-
tation or infection.
● Do not overlap the pads when applying to skin or the
device may stop working, and the gel may be removed
when separating.
● Do not the move the pads when they are working.
● Each lead wire needs to be connected to a pair of pad
(2 pads), cause a single pad doesn’t work.
29
● Ensure each connection port are tightly connected before

use, otherwise the current may be unstable.
● Pads should not touch any metal objects like belt buck-
le, necklace or other metal worn under clothes.
Always place clean pads in accordance with illustrations
provided.
11. Trouble Shooting

If your device is not operating properly, please check be-
low for common problems and suggested solutions. If the
recommended action does not solve the problem, please
contact the seller.
Possible
Problem Solution
Cause
Only apply 1
Attach a pair of pad (of the
pad on the
same channel) on the skin.
skin.
Did not set Increase the intensity of the

the intensity. connected channel.
Pads
don’t Poor connec- Connect the both ends of
work. tion between the lead wires to the pads
the pads and and the device tightly or
the device. change a new lead wire.
Poor contact
Attach the pads to the skin
between the
(no hair) tightly.
pads and skin.
30
Possible
Problem Solution
Cause
The transpar-
Peel off film on the adhe-
ent film is still
sive surface of pads.
on the pad.
Apply the pad

immediately Dry the pad.
after washing.
Pads
don’t
The gel was
stick to Replace the pad.
damaged.
the skin.
Pads get Contact the vendor for

deteriorative. replacements.
The pads are

stored under
Replace the pad.
extreme con-
ditions.
Different body Just make sure the pads

areas react are moist and make a good
One pad differently. contact.
feels
stronger
than the Plugged the wire into the
other. Poor wire output port completely. If it
contact does not work, replace the
wire and try again.
31
Possible
Problem Solution
Cause
Drop a few drops water on

The gel was
the pads to moisten gel or
dry or con-
clean it under the running
taminated.
water for few seconds.
The skin
turns
red or Excessive
the skin usage time or Reduce the application time
feels the intensity is or decrease the intensity.
irritated. too high.
The electrode
pad surface is Replace electrode pad.
worn out
The side with 1 connector

is for connecting the device
The lead
Can’t port, the side with 2 con-
wires are
plug the nectors are for connecting
conntected
lead the electrode pads, please
backwards.
wires make sure you’ve operated
into the it correctly.
device
port or
Use a compatible lead
the pad Incompatible
wire, if the new lead wires
connec- connector or
we provided are broken or
tor. damaged con-
incompatible with our ma-
nector/port.
chine, please contact us.
32
Possible
Problem Solution
Cause
Low battery. Charging the battery.
Find the on/off button ac-

Operate the
cording to the ILLUSTRA-
wrong on/off
TIONS on the user manual
button.
and turn it on again.
Insensitive
on/off button
or the on/off Reset the on/off button and
button didn’t turn it on.
Can’t reset after the
turn last use.
on the
device.
The button is Shake the device and then
stuck. turn it on again.
The device is Unplug the charging cable

charging. and then use it.
Contact us if the device

Something is
still can’t be turned on after
wrong inside
trying all of the above solo-
the device.
tions.
33
Possible
Problem Solution
Cause
MODE - Find the mode

button according to the
ILLUSTRATIONS on the
user manual and operate it
again.
MODE - Press “<” and “>”

Operate the
to switch the mode of the
wrong but-
same line, and see whether
tons.
Can’t the number changes as
adjust expected.
the
mode/
intensi-
ty/time. INTENSITY - Press “^”
and “v” on the left/right to
change the intensity of the
left/right channel.
If there’s a lock icon on the

The screen is top left side of the screen,
locked. then long press the center
button to unlock it.
34
Possible
Problem Solution
Cause
Pads are
not attached Attach both pads firmly to
to the body the skin.
firmly.
The transpar-
ent films are
Peel the film off the pads.
still on the
pads.
The pads
The Do not stack pads together
stack together
intensity or overlap. or overlap pads.
felt is
very
weak.
The cord is
not properly Connect cord correctly into
connected to the port.
the unit.
The intensity
Increase the intensity level.
is too low.
Low battery. Charging the battery.
35
Possible
Problem Solution
Cause
Find the charging port

according to the ILLUS-
Operate the
TRATIONS on the user
wrong port.
manual and plug the cable
and charge it again.
The charging port is narrow

Can not The USB is at the top and wide at the
charge. not connect- bottom, so please check
ing correctly. the direction before insert-
ing.
Ensure the power supply is

working properly, and the
No power
battery icon on the screen
source.
will flash on and off while
charging.
The cord is
Power Replace the cord.
broken.
cuts off
during
The battery is
use. Charging the battery.
weak.
No
power
The battery
source
capacity is Charging the battery.
or no
depleted.
display
on LCD.
36
12. Symbols
Symbol Meaning
Attention, consult accompanying docu-

ments
BF Isolated Applied Part
Class II equipment
Disposal in accordance with Directive

2002/96/EC
MANUFACTURER
Date when the medical device was manu-

factured.
AUTHORISED REPRESENTATIVE IN THE

EUROPEAN COMMUNITY
Pls read the user manual before use
CE Mark, meets compliance of applicable

directives and regulation in EU
37
Symbol Meaning
IIIP Classification: The first number 2: Pro-

tected against access to hazardous parts
with a finger, and the jointed test finger of
12 mm Ф, 80 mm length, shall have ad-
equate clearance from hazardous parts,
and protected against solid foreign objects
IP22 of 12.5 mm Ф and greater. The second
number: Protected against vertically falling
water drops when enclosure is tilted up to
15º. Vertically falling drops shall have no
harmful effects when the enclosure is tilted
at any angle up to 15’’ on either side of the
vertical.
13. Certification
The device complies with following normative documents:
ANSI/ES 60601-1, IEC60601-1-2, IEC60601-1-11, IEC
60601-2-10, ISO 10993-5, ISO 10993-10,FDA,MDD,CA65.
14. Customer Service

24-Month Limited Warranty
Lifetime Technical Support
+1(678)829-7256
support@iauvon.com
38
AS8012C-sms-v1.6-220420-80×130mm

AUVON-US-AS8012C-sms-v1.6-220420-80x135mm

Uploaded by

AUVON-US-AS8012C-sms-v1.6-220420-80x135mm

Uploaded by

Quick Guide

2. Connect the lead

5. Choose the con-

11. Remove the pads, do not pull the wire.

If you want to know more details about the

Device Name: TENS and Powered Muscle Stimulator

Isolated channel with independent

Pulse 0-150 mA at 500 ohm load each

Wave Form Symmetrical Bi-Phasic Square

Pulse Voltage 0- 50V (Load: 500 ohm)

Power source 180mA lithium battery

Weight 74.9 grams.

Pulse Rate From 2-100 Hz

Pulse Width From 100-240μs microseconds

Intensity 20 levels of intensity

20-minute default timer.

A low battery indicator will show up

Operating Atmosphere Pressure :

There may be a +/-5% tolerance of

1. Clean your skin before use. Use the pads on clean

2. Connect a pair of electrode pads to one lead wire;

Note: Keep the unit off.

3. Attach one pair or two pairs of the electrode pads

Note: Adding a few drops of water on the pads and

4. Turn on the device by sliding the on/off switch on

5. Press the left “V” or

6. Press the "M" button

7. Press the left “V”

9. Press and hold the

6.2 After Use

7. Recommend Massage Points

8.3 Expected Feelings

Low frequency slight

Low frequency slight

Low frequency beat-

This program gently

Quick slight beating

8.4 Mode Specification

9. TENS Pads Holder

The salient points are designed specially to

Step 1 Stick the electrode patches on the holder to

10. Safety Precautions and Warnings

severe muscle spasms and lead to chocking

● Ensure each connection port are tightly connected before

11. Trouble Shooting

Did not set Increase the intensity of the

Apply the pad

Pads get Contact the vendor for

The pads are

Different body Just make sure the pads

Drop a few drops water on

The side with 1 connector

Low battery. Charging the battery.

Find the on/off button ac-

The device is Unplug the charging cable

Contact us if the device

MODE - Find the mode

MODE - Press “<” and “>”

If there’s a lock icon on the

Low battery. Charging the battery.

Find the charging port

The charging port is narrow

Ensure the power supply is

Attention, consult accompanying docu-

BF Isolated Applied Part

Disposal in accordance with Directive

Date when the medical device was manu-

AUTHORISED REPRESENTATIVE IN THE

Pls read the user manual before use

CE Mark, meets compliance of applicable

IIIP Classification: The first number 2: Pro-

14. Customer Service

Lifetime Technical Support

You might also like