Integ 2 Assignment
Integ 2 Assignment
3. Consider 1 kg of air at 32°C that expanded by a reversible polytropic process with n = 1.25
until the pressure is halved. Determine the heat transfer. Specific heat at constant volume for air
is 0.7186 kJ/kg-K.
6. One kilogram of water (cp = 4.2 kJ/kg-K) is heated by 300 Btu of energy. What is the change
in temperature in K?
8. Determine the change in enthalpy per lbm of nitrogen gas as its temperature changes from
500°F to 200°F. (Cp = 0.2483 Btu/lbm-°F)
9. What is the resulting pressure when one pound of air at 15 psia and 200°F is heated at
constant volume to 800°F?
11. How many gallons per minute of cooling water are required to remove 100,000 kJ/hr of heat
from a diesel engine if the designed temperature rise of the water is 10°C?
12. Twenty grams of oxygen gas (O₂) are compressed at a constant temperature of 30°C to 5%
of their original volume. What work is done on the system?
14. Air having an initial pressure of 6,516 kPa and an initial volume of 0.113 m³ is compressed
adiabatically to a final volume of 0.057 m³. Calculate the work done by the gas as it compresses
to a final pressure of 17,237 kPa.
15. Gas is enclosed in a cylinder with a weighted piston as the top boundary. The gas is heated
and expands from a volume of 0.04 m³ to 0.10 m³ at a constant pressure of 200 kPa. Calculate
the work done by the system.
17. Nitrogen is expanded isentropically. Its temperature changes from 620°F to 60°F. Find the
pressure ratio (P₁/P₂).
18. An engine takes in 11,000 Btu/min of heat from a hot body while giving an output of 110 hp.
What is the thermal efficiency of this engine?
20. With three different quantities X, Y, and Z of the same kind of liquid of temperatures 9, 21,
and 38°C respectively, it is found that when X and Y are mixed together the resultant
temperature is 17°C and when Y and Z are mixed together the resultant temperature is 28°C.
Find the resultant temperature if X and Z were mixed.
21. An air bubble rises from the bottom of a well where the temperature is 25°C, to the surface
where the temperature is 27°C. Find the percent increase in the volume of the bubble if the
depth of the well is 5 m. Atmospheric pressure is 101,528 Pascals.
23. A large mining company was provided with a 3000 cm³ of compressed air tank. Air pressure
in the tank drops from 700 kPa to 180 kPa while the temperature remains unchanged at 28°C.
What percentage has the mass of air in the tank been reduced?
24. How much work is necessary to compress air in an insulated cylinder from 0.20 m³ to 0.01
m³? Use T₁ = 20°C and P₁ = 100 kPa.
26. A closed vessel contains air at a pressure of 160 kN/m² gauge and temperature of 30°C.
The air is heated at constant volume to 60°C with the atmospheric pressure of 759 mm Hg.
What is the final gauge pressure?
27. What is the temperature in °C of 2 liters of water at 30°C after 500 Calories of heat have
been added?
29. Assuming compression is according to the law PV = constant. Calculate the initial volume of
gas at a pressure of 2 bar which will occupy a volume of 6 m³ when it is compressed to a
pressure of 42 bar.
30. A steam condenser receives 10 kg per second of steam with an enthalpy of 2,570 kJ/kg.
Steam condenses into liquid and leaves with an enthalpy of 160 kJ/kg. Cooling water passes
through the condenser with temperature increases from 13°C to 24°C. Calculate the cooling
water flow rate in kg/s.
32. Steam enters the superheaters of a boiler at a pressure of 25 bar and dryness of 0.98 and
leaves at the same pressure at a temperature of 370°C. Calculate the superheat.
Properties of steam:
At 25 bar and 370°C (h = 3,171.8 kJ/kg)
At 25 bar and 0.98 dryness (h = 962.11 kJ/kg, hfg = 1841.01 kJ/kg)
33. The thermal efficiency of a particular engine operating on an ideal cycle is 35%. Calculate
the heat supplied per 1200 watt-hr of work developed in kJ.
35. Ammonia weighing 22 kg is confined inside a cylinder equipped with a piston and has an
initial pressure of 413 kPa at 38°C. If 2900 kJ of heat is added to the ammonia until its pressure
and temperature are 413 kPa and 100°C, respectively. What is the amount of work done by the
fluid in kJ?
36. What is the total required heating energy in raising the temperature of a given amount of
water when the energy supplied is 1000 kWh with heat losses of 25%?
38. A certain gas at 101.325 kPa and 16°C whose volume is 2.83 m³ are compressed into a
storage vessel of 0.31 m³ capacity. Before admission, the storage vessel contained the gas at a
pressure and temperature of 137.8 kPa and 24°C. After admission, the pressure increased to
1171.8 kPa. What should be the final temperature of the gas in the vessel in Kelvin?
39. If the specific heat at constant pressure for CO₂ is given as 0.201 Btu/lb-R, what is the value
of the specific heat at constant volume?
41. Find the mass of carbon dioxide having a pressure of 20 psia at 200°F with 10 ft³ volume.
42. What is the approximate value of temperature of water having enthalpy of 208 Btu/lb?
44. Two kilograms of air in a rigid tank changes its temperature from 32°C to 150°C. Find the
work done during the process.
45. A perfect gas has a value of R = 58.8 ft-lb/lb-°R and k = 1.26. If 20 Btu are added to 10 lbs
of the gas at constant volume when initial temperature is 90°F, find the final temperature.
47. If air is at a pressure of 3200 lb/ft² and at a temperature of 800 °R, what is the specific
volume?
48. Given 280 liters of a gas at 63.5 cm Hg. The gas has a specific heat at constant pressure of
0.847 kJ/kg K and a specific heat at constant volume of 0.659 kJ/kg K. Which of the following
most nearly equals the volume the gas would occupy at a final pressure of 5 atm if the process
is adiabatic?
50. Air is flowing through a 100 mm I.D. pipe at the rate of 6 kg/min. The air pressure and
temperature are 500 kPa and 30°C respectively. Find the velocity of the air in m/s.