Sharp ND
Sharp ND
Sharp ND
High-performance photovoltaic modules made of polycrystalline (156.5 mm) silicon solar cells with module efficiencies of up to 15.2 %. 3 busbar technology for enhancing the power output. Anti-reflex coating to increase light absorption. Production controlled positive power tolerance from 0 to +5 %. Only modules will be delivered that have the specified power or more for high energy yield. Delivery of modules in 5-watt intervals. Improved temperature coefficient to reduce power losses at higher temperatures. High power performance even at lower irradiations. Quality from Sharp
Certificates and approvals All modules are tested and certified according to
Continual checks guarantee a consistently high level of quality. Every module undergoes visual, mechanical, and electrical inspection. This is recognisable by means of the original Sharp label, the serial number, and the Sharp guarantee: 0-year product guarantee 1 5-year linear performance guarantee 2 Minimum 96 % of the specified minimum power output after 1 year Maximum 0.667 % annual reduction of the power output for following 24 years Minimum 80 % of the specified minimum power output after 25 years
CE MCS accredited product (MCS PV0007) ISO 9001:2008 and ISO 14001:2004
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
Years
STC = Standard Test Conditions: irradiance 1,000 W/m, AM 1.5, cell temperature 25 C. Rated electrical characteristics are within 10 % of the indicated values of Isc , Voc and 0 to +5 % of Pmax (power measurement tolerance 3 %).
NOCT: Module operating temperature at 800 W/m irradiance, air temperature of 20 C, wind speed of 1 m/s.
Limit values
Maximum system voltage Over-current protection Temperature range Maximum mechanical load 1,000 V DC 15 A 40 to +90 C 2,400 N/m
Mechanical data
Length Width Depth Weight 1,652 mm (+/3.0 mm) 994 mm (+/2.0 mm) 46 mm (+/0.8 mm) 19 kg
Temperature coefficient
Pmax Voc Isc 0.440 % / C 0.329 % / C +0.038 % / C
Characteristic curves
ND-R240A5
Rear view
813.5 25 365 100 4 grounding hole 5.1 900 50 Power (W) 58
General data
Cells Front glass Frame Connection box Cable Connector polycrystalline, 156.5 mm 156.5 mm, 60 cells in series low iron tempered glass, 3 mm anodized aluminium alloy, silver PPE/PPO resin, IP65 rating, 58 125 15 mm, 3 bypass diodes 4 mm, length 900 mm SMK (MC4 compatible), Type CCT9901-2361F/2451F (Catalogue no. P51-7H/R51-7), IP67 rating
Registration
Sharp Solar guarantees the safety, quality and value of your product over many years the only thing we ask you to do is to register your modules with the serial number, so that we can send you the guarantee certificate. Register your modules quickly and easily at www.brandaddedvalue.net.
To extend the module connection leads, only use SMK connector from the same series or MultiContactAG MC4 connector (PV-KST04/PV-KBT04)
Sharp Energy Solution Europe a division of Sharp Electronics (Europe) GmbH Sonninstrasse 3, 20097 Hamburg, Germany Tel: + 49 (0) 40 / 23 76 - 0 Fax: + 49 (0) 40 / 23 76 - 21 93 www.sharp.eu/solar
Local responsibility: Austria [email protected] Benelux [email protected] Central & Eastern Europe [email protected] Denmark [email protected] France [email protected] Germany [email protected]
Scandinavia [email protected] Spain & Portugal [email protected] Switzerland [email protected] United Kingdom [email protected]
SolarND_60A5_E0112
The reference image on the front page shows a 13 kWp system in Northern Germany. Note: Technical data is subject to change without prior notice. Before using Sharp products, please request the latest data sheets from Sharp. Sharp accepts no responsibility for damage to devices which have been equipped with Sharp products on the basis of unverified information. The specifications may deviate slightly and are not guaranteed. Installation and operating instructions are to be found in the corresponding handbooks, or can be downloaded from www.sharp.eu/solar. This module should not be directly connected to a load.
994
934
59 15 434.510 125