Scribd
Upload
25 views11 pages

LIMITS, FITS & Gauges

This document discusses limits, fits, and gauges. It explains that exact sizes are impossible to achieve, so tolerances are specified to establish boundaries that allow for deviations while still fulfilling the design intent. Tolerances account for variations in materials, machines, and human error during manufacturing. There are different types of tolerances, such as bilateral and unilateral tolerances. Tolerance accumulation, also called tolerance build up, refers to how tolerances combine when multiple parts are assembled together. Limits of size define the maximum and minimum permissible sizes of a component. Fits describe the relationship between holes and shafts during assembly.

Uploaded by

Ajinkya Deshmukh
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
Download as pptx, pdf, or txt
25 views11 pages

LIMITS, FITS & Gauges

This document discusses limits, fits, and gauges. It explains that exact sizes are impossible to achieve, so tolerances are specified to establish boundaries that allow for deviations while still fulfilling the design intent. Tolerances account for variations in materials, machines, and human error during manufacturing. There are different types of tolerances, such as bilateral and unilateral tolerances. Tolerance accumulation, also called tolerance build up, refers to how tolerances combine when multiple parts are assembled together. Limits of size define the maximum and minimum permissible sizes of a component. Fits describe the relationship between holes and shafts during assembly.

Uploaded by

Ajinkya Deshmukh
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
Download as pptx, pdf, or txt
Download as pptx, pdf, or txt
You are on page 1/ 11

LIMITS,FITS & Gauges

Why study Limits & Fits


Exact size is impossible to achieve.
Establish boundaries within which deviation from
perfect form is allowed but still the design intent is
fulfilled.
Enable interchangeability of components during
assembly
Definition of Limits:
The maximum and minimum permissible sizes within which
the actual size of a component lies are called Limits.

Tolerance
It is impossible to make anything to
an exact size, therefore it is essential
to allow a definite tolerance or
permissible variation on every
specified dimension.

Why Tolerances are specified?


Variations in properties of
the material being
machined introduce errors.
The production machines
themselves may have some
inherent inaccuracies.
It is impossible for an
operator to make perfect
settings. While setting up
the tools and work piece on
the machine, some errors
are likely to creep in.

Diameter lies between


40.05 mm & 39.95 mm
Tolerance in the above
example is (40.0539.95) =0.10 mm

Unilateral Tolerance
Tolerances on a dimension
may either be unilateral or
bilateral.
When the two limit
dimensions are only on one
side of the nominal size,
(either above or below) the
tolerances are said to be
unilateral.
For unilateral tolerances, a
case may occur when one of
the limits coincide with the
basic size.

Bilateral Tolerance
When the two limit
dimensions are
above and below
nominal size, (i.e.
on either side of
the nominal size)
the tolerances are
said to be bilateral.

Tolerance Accumulation (or)


Tolerance Build up

Tolerance Accumulation (or)


Tolerance Build up

LIMITS OF SIZE & TOLERANCE


Limits of size
The two extreme permissible sizes of a component between which
the actual size should lie including the maximum and minimum
sizes of the component.

Nominal size
It is the size of the component by which it is referred to as a
matter of convenience.

Basic size
It is the size of a part in relation to which all limits of variation are
determined.

Zero Line
It is the line w.r.t which the positions of tolerance zones are shown.

LIMITS OF SIZE &


TOLERANCE
Deviation
It is the algebraic difference between a limit of size and the corresponding basic
size.

Upper Deviation
It is the algebraic difference between the maximum limit of size and the
corresponding basic size. It is denoted by letters ES for a hole and es for a shaft.

Lower Deviation
It is the algebraic difference between the minimum limit of size and the
corresponding basic size. It is denoted by letters EI for a hole and ei for a shaft.

Fundamental Deviation
It is the deviation, either upper or lower deviation, which is nearest to the zero line
for either a hole or a shaft. It fixes the position of the tolerance zone in relation to
the zero line.

Allowance
It is the intentional difference between the hole dimensions and shaft dimension
for any type of fit.

SYSTEM OF FITS
Fit is an assembly
condition between
Hole & Shaft
Hole
A feature engulfing a
component.

Shaft
A feature being
engulfed by a
component.

You might also like