Example (In Terms of Percentage)

Example ( In terms of
Percentage)
 CNG-LPG company in Karachi,
purchases 5000 compressors a year
at Rs.8,000 each. Ordering costs are
Rs. 500 and Annual carrying costs
are 20 % of the purchase price.
Compute the Optimal price and the
total annual cost of ordering and
carrying the inventory.
Example ( In terms of
Percentage)
Data

• D=Demand =5,000
• S=Ordering= Rs. 500
• H=Holding/Carrying Cost=0.2 X
8,000=Rs.1600
Example 3 ( In terms of
Percentage)
 Q0= Sq Root of ( 2(5,000)(500)/(1600))
 = 55.9=56 Compressors
 TC= Carrying costs + Ordering Costs

=Q0/2 ( H) + D/Q0 (S)
= 56/2 ( 1600) + 5000/56 (500)
= 28 ( 1600)+ 44,643
=44,800+44,643=Rs. 89,443
Economic Production Quantity
(EPQ)
 Production done in batches or lots

 Capacity to produce a part exceeds
the part’s usage or demand rate.

 Assumptions of EPQ are similar to
EOQ except orders are received

incrementally during production.
Production
Production
& Usage
& Usage
Usage Usage
In
ve
nt
o ry
Le
ve
l
Assumptions
 Only one item is involved

 Annual demand is known
 Usage rate is constant
 Usage occurs continuously
 Production rate is constant
 Lead time does not vary
 No quantity discounts
Assumptions
 The basic EOQ model assumes that
each order is delivered at a single
point in time.
 If the firm is the producer and
user, practical examples indicate

that inventories are replenished
over time and not instantaneously.
 If usage and production ( delivery)
rates are equal, then there is no

buildup of inventory.
Assumptions
 Set up costs in a way our similar
to ordering costs because they are
independent of lot size.
Assumptions
 The larger the run size, the fewer
the number of runs needed and
hence lower the annual setup.
 The number of runs is D/Q and the
annual setup cost is equal to the

number of runs per year times the
cost per run ( D/Q)S.
Assumptions
 Total Cost is
 TC
min= Carrying Cost+ Setup Cost
= ( I max/2)H+ (D/Q0)S
Where I = Maximum Inventory

max
Economic Run Size
2DS p
Q0 
H p u
Assumptions
 Where p= production rate
 U = usage rate
Assumptions
 The Run time ( the production phase
of the cycle) is a function of the run
size and production rate
Run time = Q0/p
The maximum and average inventory

levels are
I max = Q0/p (p-u)
I average= I max/2
Example (Economic Run Size)
 A firm in Sialkot produces 250,000 each
world class footballs for both domestic and
international markets . It can make
footballs at a rate of 2000 per day. The
footballs are manufactured uniformly over
the whole year. Carrying cost is Rs. 100
per football and Setup cost for a
production run is Rs. 2500. The
manufacturing unit operates for 250 days
per year.
Example 4 Economic Run Size
 Determine the
1. Optimal Run Size.
2. Minimum total annual cost for carrying and setup cost.
3. Cycle time for the Optimal Run Size.
4. Run time
2 DS p
Q0 
H p u
 Determine the
1. Optimal Run Size.
2 DS p
Q0 
H p u
 = Sq Root (2 X 250,000 X 2500/100 )( Sq

Root (2 000 /2000-1000 ))
 2500( sqroot2X2)=5000 footballs.
 Minimum total annual cost for carrying
Minimum total annual cost for carrying
and setup cost.
= Carrying Cost + Set up Cost
=( I max/2)H+ ( D/Q0)S
Where I max= Q0/p ((p-u))=5000/2000(1000)
=2500 footballs
Now TC= 2500/2 X 100 + (250,000/5000 )
(2500)
=1250 X 100 + 125,000
=125,000+ 125,000
= Rs. 250,000
3. Cycle time for the Optimal Run

Size.
Q0/U=5000/1000= 5 days
4. Run time
Q0/p=5000/2000= 2.5 days
Quantity Discount
 Price reductions for large orders are
called Quantity Discounts.
Total Costs with Purchasing
Cost
Annual Annual Purchasing
+
TC = carrying + ordering cost
cost cost
Q + DS + PD
TC = H
2 Q
Total Costs with PD
Cost
Adding Purchasing cost TC with PD

doesn’t change EOQ
TC without PD
PD
0 EOQ Quantity
Example
 The maintenance department of a
large cardiology hospital in
Islamabad uses about 1200 cases of
corrosion removal liquid, used for
maintenance of hospital. Ordering
costs are Rs 100, carrying cost are
Rs 20 per case, and the new price
schedule indicates that
Example
orders of less than 50 cases will cost
Rs 1250 per case, 50 to 79 cases will
cost Rs 1150 per case , 80 to 99
cases will cost Rs 1050 per case and
larger costs will be Rs 1000 per case.
Determine the Optimal Order
Quantity and the Total Cost.

Example
 D=1200 case.
 S= Rs. 100 per case
 H=Rs.20 per case
 Range Price
• 1 to 49 Rs 1250
• 50 to 79 Rs 1150
• 80 to 99 Rs 1050
• 100 or more Rs 1000
Example
 Compute the Common EOQ=Sq Root ( 2DS/H)
= Sq Root ( 2 X 100 X 1200/20)
=Sq Root (12000)
=109.5=110 cases which would be brought at 1000
per oder
The total Cost to Purchase 1200 cases per year would
be
TC= Carrying Cost+ Order Cost+ Purchase Cost
=(Q/2)H+(D/Q0)S+PD
=(110/2)20+(1200/110)100+1200X 1000
=1100+1091+12000,000
=Rs. 1,202,191
When to Reorder with EOQ
Ordering
 Reorder Point - When the quantity on
hand of an item drops to this amount,
the item is reordered.
 Safety Stock - Stock that is held in
excess of expected demand due to
variable demand rate and/or lead time.
 Service Level - Probability that demand
will not exceed supply during lead
time.
Example
 An apartment complex in Quetta
requires water for its home use.
 Usage= 2 barrels a day

 Lead time= 5 days
 ROP= Usage X Lead Time
 = 2 barrels a day X 7 = 14 barrels

Determinants of the Reorder
Point
 The rate of demand
 The lead time

 Stock out risk (safety stock)
 Demand and/or lead time variability

Example
 An owner of a Montessori equipment firm
in Karachi, determined from historical
records that demand for wood required
for Montessori equipment averages 25
tones per anum. His operations
management expertise allowed him to
determine the demand during lead that
could be described by a normal
distribution that has a mean of 25 tons
and a standard deviation of 2.5 tons.
Fixed-Order-Interval Model
 Orders are placed at fixed time
intervals.
 Order quantity for next interval?
 Suppliers might encourage fixed
intervals.
 May require only periodic checks of
inventory levels.
 Risk of stock out.

Example (In Terms of Percentage)

Uploaded by

Example (In Terms of Percentage)

Uploaded by

Example ( In terms of

 TC= Carrying costs + Ordering Costs

 Production done in batches or lots

the part’s usage or demand rate.

EOQ except orders are received

 Only one item is involved

 Usage rate is constant

 Usage occurs continuously

 Production rate is constant

 Lead time does not vary

user, practical examples indicate

rates are equal, then there is no

annual setup cost is equal to the

Where I = Maximum Inventory

Run time = Q0/p

The maximum and average inventory

 = Sq Root (2 X 250,000 X 2500/100 )( Sq

3. Cycle time for the Optimal Run

Adding Purchasing cost TC with PD

Quantity and the Total Cost.

 H=Rs.20 per case

 Usage= 2 barrels a day

 ROP= Usage X Lead Time

 = 2 barrels a day X 7 = 14 barrels

 The lead time

 Demand and/or lead time variability

 Suppliers might encourage fixed

You might also like