Scribd
Upload
295 views16 pages

UNIT IV - Part 5: IOT Platforms Design Methodology

This document discusses Internet of Things (IoT) platforms design methodology. It describes the various stages of an IoT platform design including purpose and requirements specification, process specification, domain model specification, information model specification, service specification, IoT level specifications, functional view specification, operational view specification, device and component integration, and application development. It provides an example case study of a weather monitoring system to illustrate how these design stages are applied. The case study describes designing a system to collect environmental data from sensors, sending it to the cloud for analysis and storage. It details the domain model, controller service, and deployment design for the weather monitoring system.

Uploaded by

SankalpRai
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
Download as pptx, pdf, or txt
295 views16 pages

UNIT IV - Part 5: IOT Platforms Design Methodology

This document discusses Internet of Things (IoT) platforms design methodology. It describes the various stages of an IoT platform design including purpose and requirements specification, process specification, domain model specification, information model specification, service specification, IoT level specifications, functional view specification, operational view specification, device and component integration, and application development. It provides an example case study of a weather monitoring system to illustrate how these design stages are applied. The case study describes designing a system to collect environmental data from sensors, sending it to the cloud for analysis and storage. It details the domain model, controller service, and deployment design for the weather monitoring system.

Uploaded by

SankalpRai
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
Download as pptx, pdf, or txt
Download as pptx, pdf, or txt
You are on page 1/ 16

UNIT IV -Part 5

IOT Platforms Design


Methodology
Mrs. Kiran M. Pradhan
Internet of Things
MSc.CS FY Sem-II
10-04-2020
IOT Platforms Design
Methodology
It includes:
Purpose & Requirements Specification
Process Specification
Domain Model Specification
Information Model Specification
Service Specification
IOT Platforms Design
Methodology
IoT Level Specifications
Functional view Specification
Operational View Specification
Device & component Integration
Application Development
Device & component Integration

The devices and components used in this example are Raspberry Pi mini computer, LDR sensor
and relay switch actuator.
Application Development
 The application has controls for the mode (auto on or auto off) and
the light (on or off).
 In the auto mode, the IoT system controls the light appliance
automatically based on the lighting conditions in the room.
 When auto mode is enabled the light control in the application is
disabled and it reflects the current state of the light.
 When the auto mode is disabled, the light control is enabled and it is
used for manually controlling the light.
Application Development
Case Study Weather Monitoring System
The purpose of the weather monitoring system is to collect
data on environmental conditions such as temperature,
pressure, humidity and light in an area using multiple end
nodes.
The end nodes send the data to the cloud where the data is
aggregated and analyzed.
Case Study Weather Monitoring System
Figure shows the process
specification for the weather
monitoring system.
The process specification
shows that the sensors are
read after fixed intervals and
the sensor measurements
are stored.
Case Study Weather Monitoring System
In this domain model the physical entity is the environment
which is being monitored .
There is a virtual entity for the environment. Devices include
temperature sensor, pressure sensor, humidity sensor, light
sensor and single-board mini computer.
Resources are software components which can be either
on-device or network-resources.
Services include the controller service that monitors the
temperature , pressure deriving the services from the process
specification and information model for the weather monitoring
system, humidity and light and sends the readings to the
deriving the services from the process specification and
information model for the weather monitoring system.
Case Study Weather Monitoring System(domain
model )
Case Study Weather Monitoring System(controller
service )
• The controller service runs as
a native service on the device
and monitors temperature,
pressure, humidity and light
once every 15 seconds.
• The controller service calls
the REST service to store
these measurements in
the cloud.
Case Study Weather Monitoring System
(deployment design for the system )
• The system consists of multiple nodes
placed in different locations for
monitoring temperature, humidity and
pressure in an area.
• The end nodes are equipped with various
sensors .
• The end nodes send the data to the cloud
and the data is stored in a cloud database.
• The analysis of data is done in the cloud
to aggregate the data and make
predictions
Case Study Weather Monitoring System

Mapping deployment level to functional groups for the weather monitoring


system.
Case Study Weather Monitoring System

Mapping functional Groups to operational view specifications for the weather


monitoring system.
Case Study Weather Monitoring System(controller
service )
The schematic diagram of
the weather monitoring
system.
The devices and
components used in this
example are Raspberry Pi
mini computer,
temperature sensor,
humidity sensor, pressure
sensor and LDR sensor.
Thank
you

Ref: IOT by Ashdeep Bahga &Vijay Madisetti 51

You might also like