Skip to main content

Network and proxy

Configure a proxy, check service connectivity, and troubleshoot network issues.

Use Settings → Network to configure the proxy for Qoder or diagnose connections to sign-in, model, messaging, and resource services. If your network requires a proxy, configure it first, then run diagnostics if a service is still unavailable.

Configure a proxy

In Settings → Network → Network proxy, choose the mode for your network. Select System proxy to follow system settings. For a manual HTTP, HTTPS, or SOCKS5 proxy, enter the scheme, host, and port, such as socks5://127.0.0.1:1080. Supply authentication details as required and percent-encode special characters in the address. If your organization provides a PAC file, choose PAC configuration. Enter an HTTP or HTTPS URL reachable directly from this device, or select a local .pac file. Use Test connection, check the result, and Save. Qoder fetches the URL when you test or save. Save again after the remote rules change, or reimport a changed local file. PAC mode uses the saved rules and currently does not support routes requiring proxy authentication.

Specify proxy bypass addresses

In manual mode, enter domains or IP addresses that should connect directly in No proxy for, one per line or separated by commas. A domain includes its subdomains; IP addresses match exactly. For example, use example.com, not https://example.com or *.example.com. Ports and network ranges are not supported. The limit is 100 entries. Choose Test connection, inspect the result, then Save. Saving applies the configuration without restarting; running tools and MCP connections update at safe boundaries. Leaving the page clears an unsaved proxy draft. Check the application result after saving; do not assume the new configuration took effect if saving failed. This affects the local app and local Agent, not Remote SSH hosts. A reachable proxy port does not establish service availability or successful account authentication.

Run a diagnostic

1

Open Network diagnostics

Go to Settings → Network.
2

Start the checks

Select Run diagnostics. Keep Qoder online and wait for every service to return a result.
3

Review the results

After signing in, review the services listed for your edition and their response times. Check model services separately when that check is available. Before signing in, run diagnostics from the sign-in screen to check the required services and see the latest sign-in result if one is recorded. If a check fails, use the reported stage and suggested action before retrying.
4

Keep the results

Select Copy diagnostic report when you need to share the results. Close the result window and select Run diagnostics again after the network changes.

If a check fails

  1. Confirm that the device can access the internet, then rerun the diagnostic.
  2. Compare the result on another network approved by your organization.
  3. If only one service fails, provide the diagnostic report to your network administrator or Qoder Support.
  4. After changing network, firewall, DNS, or certificate settings, rerun the diagnostic to confirm recovery.
A diagnostic report can help locate a connection issue. Do not include account passwords, proxy credentials, certificate private keys, or other secrets in a task or support request.