This is a Proof of Concept. Use anything here at your own risk

If you use Windows, go get a linux machine.

Get terraform, clone this repo with git, cd into the dir

You have 2 options now. Either rely on terraform to create SSH keys for you or create a new SSH key yourself. Per terraform docs for TLS provider the former is mostly for development purposes, so if you plan to use this for production, create an SSH key pair on your own. You can do so with the following command

$ ssh-keygen -t ed25519 -f id_ed25519_k0s_hetzner_poc

Now, go to Hetzner Cloud console, create project, go to security, create an API token

Create a file named terraform.tfvars and put inside the Token from Hetzner's portal and the public key as below. Note that this file is git-ignored

hcloud_token = "API_TOKEN_HERE"
domain       = "example.com"

These are the absolute necessities, look below for all the tunables that you can configure using this file

If you have created your own SSH key pair, add the following in that file

ssh_pub_key       = "SSH_KEY_HERE"
ssh_priv_key_path = "path_to_priv_key_file"

Now, run the following to get the providers

$ terraform init

Then validate that our HCL is sound

$ terraform validate

Then spew out the plan and stare at it for a while, to dispel demons etc

$ terraform plan

Once you are sure that the demons have been exorcised create the resources

$ SSH_KNOWN_HOSTS=/dev/null terraform apply -auto-approve

Wait for the output and fetch the IPv6 and IPv4 addresses. Based on what you have of the 2, ssh to the nodes. Note that I am on purpose redirecting to /dev/null the host key as I don't want to keep it around for this PoC.

ssh -o UserKnownHostsFile=/dev/null -i ~/.ssh/id_ed25519_k0s_hetzner_poc root@<ip_address>

There are 2 ways to use the cluster. Internally, using the tooling provided by k0s itself, or via the kubeconfig file and standard tooling

k0s is a distribution of Kubernetes that has some interesting properties. Some basic commands:

List nodes

# k0s kubectl get nodes -o wide

List all pods everywhere

# k0s kubectl get pods --all-namespaces -o wide

List namespaces

# k0s kubectl get ns

Deploy a basic pod

# k0s kubectl run nginx --image=nginx

Delete pods

# k0s kubectl delete pods --all

And so on. All of these are meant to be run from a controller node.

If you have kubectl (or any other compatible kubernetes client, e.g. Lens, Helm) locally, there is kubeconfig file saved in the root of the repo after a successful apply, use it at your discretion. Note: This file provides FULL access to the cluster. Don't mishandle it

Make sure you have a compatible kubectl version around. Following kubectl skew policy, you can utilize a kubectl 1 version newer or older of whatever the cluster is

KUBECONFIG=kubeconfig kubectl get nodes -o wide

This assumes you know your way around basic helm usage

KUBECONFIG=kubeconfig helm install <name> <chart>

Backup the configuration of k0s

# mkdir -p backup
# k0s backup --save-path backup

Restore the above

# k0s backup backup/<file_name>

Check the system. Note the IPv4/IPv6 conntrack/nat warnings are expected for kernels past 4.19 and 5.1 respectively

# k0s sysinfo | grep -v pass

Just increase controller_count or worker_count and run

$ SSH_KNOWN_HOSTS=/dev/null terraform apply -auto-approve

Not supported right now

Cloud isn't free and this is a PoC. Delete everything when done to avoid runaway costs

$ SSH_KNOWN_HOSTS=/dev/null terraform apply -auto-approve -destroy

See variables.md

• Implement an easy way to add more controllers
• Implement an easy way to add more workers
• The controller gets a taint that needs to be deleted (or workloads to apply a toleration)
• sysinfo complains about NAT unknown, figure it out. #1
• Evaluate using k0s's helm integration
• Allow to set a Reverse DNS
• Decide whether to have the ssh key in user-data or as a terraform resource. Need to evaluate how the latter interacts with cloud-init, if at all
• Support Hetzner "private" networks
• Support vswitch type in Hetzner "private" networks
• Support load balancers talking to private network targets
• Support almost fully isolated controllers+workers (no IPv6, no IPv4)
  • See k0sctl bastion hosts setting https://github.com/k0sproject/k0sctl#spechostsssh-mapping-optional
  • See upload binaries section: https://github.com/k0sproject/k0sctl#spechostsuploadbinary-boolean-optional-default-false
  • See https://github.com/selfscrum/terraform-hcloud-routeros-router for having a RouterOS doing the NAT gateway
  • Alternatively, just a Debian system doing the bastion host/NAT gateway
• Evaluate/support Hetzner's cloud controller manager
• Evaluate/support Hetzner's CSI driver
• Add support for LUKS encrypted CSI volumes
• Add prometheus support
• Hetzner right kinda leads us to use the root user. We apparently can use cloud-inits user-data to get away from that. Apparently it won't help much, stick with what we got
• Write more docs
• Support Debian 12
• Upstream amended CSI driver helm chart - Rejected, won't happen
• Switch to using upstream CSI helm chart - https://github.com/hetznercloud/csi-driver/blob/main/docs/kubernetes/README.md#getting-started
• Replace ferm:
  • workers: Move to Calico Host Endpoints and GlobalNetwork policies
  • controllers: Move to hetzner's firewalling functionality.
• Test PVC moves between nodes
• Support non terraform managed (e.g. baremetal) workers
• Support ingress NodePort service type