Don't perform text substitutions where not needed

crazysnowboy · Dec 6, 2010 · 20a3936 · 20a3936
1 parent b16b463
commit 20a3936
Show file tree

Hide file tree

Showing 129 changed files with 180 additions and 45 deletions.
diff --git a/acl/lang/en b/acl/lang/en
@@ -337,7 +337,7 @@ switch_euser=You are not allowed to switch to this user
 switch_eold=Existing session not found!
 
 rbac_title=Setup RBAC
-rbac_desc=Webmin's RBAC integration provides a way for user module and ACL permissions to be determined from an RBAC (Role Based Access Control) database, rather than Webmin's own configuration files. Once RBAC support is enabled, any user for whom the <b>$edit_rbacdeny1</b> option is selected will have his capabilities determined by RBAC rather than Webmin's own access control settings.
+rbac_desc=Webmin's RBAC integration provides a way for user module and ACL permissions to be determined from an RBAC (Role Based Access Control) database, rather than Webmin's own configuration files. Once RBAC support is enabled, any user for whom the <b>RBAC controls all modules and ACLs</b> option is selected will have his capabilities determined by RBAC rather than Webmin's own access control settings.
 rbac_esolaris=RBAC is only supported on Solaris at the moment, and so cannot be used on this $1 system.
 rbac_eperl=The Perl module $1 needed for RBAC integration is not installed. <a href='$2'>Click here</a> to have it installed now.
 rbac_ecpan=You do not have access to Webmin's Perl Modules page in order to install the necessary $1 module for RBAC integration.
@@ -448,3 +448,4 @@ makedn_still=Some problems were found even after DN creation : $1
 schema_title=Download LDAP Schema
 schema_desc=Before Webmin can use an LDAP server to store users and groups it must be configured to use the schema below. This can typically be done by saving the schema definition in <tt>/etc/ldap/schema</tt> or <tt>/etc/openldap/schema</tt> as <tt>webmin.schema</tt>, then configuring the server to load that schema file.
 schema_download=Download schema file : <a href=$1>$1</a>
+__norefs=1
diff --git a/adsl-client/lang/en b/adsl-client/lang/en
@@ -65,3 +65,4 @@ log_bootup=Enabled ADSL at boot time
 log_bootdown=Disabled ADSL at boot time
 log_setup=Set up default configuration
 
+__norefs=1
diff --git a/ajaxterm/lang/en b/ajaxterm/lang/en
@@ -3,3 +3,4 @@ index_epython=Ajaxterm requires Python to run, but the $1 command was not found
 index_estart=Ajaxterm did not start accepting connections on port $2 after $1 seconds.
 index_popup=Open in separate window ..
 index_credits=Uses code from <a href='$1' target=_new>Ajaxterm</a> by Antony Lesuisse.
+__norefs=1
diff --git a/apache/lang/en b/apache/lang/en
@@ -1124,3 +1124,4 @@ mods_available=Available for installation
 mods_ecannot=You are not allowed to configure Apache modules
 mods_save=Enable Selected Modules
 mods_desc=This page allows you to select which optional Apache modules are enabled, using the checkbox next to each module name. Be careful when disabling a module, as any existing directives that are specific to it will be no longer recognized.
+__norefs=1
diff --git a/at/lang/en b/at/lang/en
@@ -65,3 +65,4 @@ log_create_job=Created scheduled command for $1
 log_delete_job=Cancelled scheduled command for $1
 log_exec_job=Executed scheduled command for $1
 log_delete_jobs=Cancelled $1 scheduled commands
+__norefs=1
diff --git a/backup-config/lang/en b/backup-config/lang/en
@@ -119,3 +119,4 @@ email_pre=Running pre-backup command $1 ..
 email_post=Running post-backup command $1 ..
 email_prefailed=Pre-backup command failed!
 
+__norefs=1
diff --git a/bacula-backup/lang/en b/bacula-backup/lang/en
@@ -656,3 +656,4 @@ restore_enofiles=None of the selected files are in the backup
 restore_level_F=Full
 restore_level_D=Differential
 restore_level_I=Incremental
+__norefs=1
diff --git a/bandwidth/lang/en b/bandwidth/lang/en
@@ -82,3 +82,4 @@ rotate_title=Updating Statistics
 rotate_doing=Processing logged network traffic ..
 rotate_done=.. done.
 
+__norefs=1
diff --git a/bind8/lang/en b/bind8/lang/en
@@ -1108,3 +1108,5 @@ trusted_ealg=Missing or invalid algorithm number in row $1
 trusted_ekey=Missing base-64 encoded trusted zone key in row $1
 trusted_setup=For DNSSEC to be useful to verify the majority of signed zones on the Internet, BIND must be configured to use a DLV server. Webmin can set this up for you, using the ICS DLV server at $1.
 trusted_ok=Setup DLV and Enable DNSSEC Verification
+__norefs=1
+__norefs=1
diff --git a/blue-theme/lang/en b/blue-theme/lang/en
@@ -41,3 +41,4 @@ right_updates=Package updates
 right_upok=All installed packages are up to date
 right_upneed=$1 package updates are available
 right_upsec=$1 package updates are available, of which $2 are security updates
+__norefs=1
diff --git a/bsdexports/lang/en b/bsdexports/lang/en
@@ -47,3 +47,4 @@ save_esame1=The directory <tt>$1</tt> is already being exported to <tt>$2</tt>.
 save_esame2=The directory <tt>$1</tt> is already being exported to <tt>$2</tt>. Your operating system does not allow directories on the same <i>local</i> filesystem to be exported to the same network separately
 
 restart_err=Failed to apply changes
+__norefs=1
diff --git a/burner/lang/en b/burner/lang/en
@@ -147,3 +147,4 @@ acl_dirs=Allow directories for source files
 delete_err=Failed to delete burn profiles
 delete_enone=None selected
 
+__norefs=1
diff --git a/certmgr/lang/en b/certmgr/lang/en
@@ -147,3 +147,4 @@ manual_title=Edit Config File
 manual_desc=Editing OpenSSL configuration file $1 ..
 manual_err=Failed to save config file
 manual_edata=Nothing entered!
+__norefs=1
diff --git a/change-user/lang/en b/change-user/lang/en
@@ -36,3 +36,4 @@ acl_lang=Can change language?
 acl_theme=Can change theme?
 acl_pass=Can change password (when set in Webmin) ?
 
+__norefs=1
diff --git a/cluster-copy/lang/en b/cluster-copy/lang/en
@@ -66,3 +66,4 @@ email_subject_failed=Cluster copy of $1 failed
 delete_err=Failed to delete copies
 delete_enone=None selected
 
+__norefs=1
diff --git a/cluster-cron/lang/en b/cluster-cron/lang/en
@@ -33,3 +33,4 @@ log_deletes=Deleted $1 cluster cron jobs
 
 delete_err=Failed to delete cluster cron jobs
 delete_enone=None selected
+__norefs=1
diff --git a/cluster-passwd/lang/en b/cluster-passwd/lang/en
@@ -6,3 +6,4 @@ passwd_err=Failed to change password
 passwd_title=Changing Password
 passwd_on=Changing password on $1 ..
 passwd_euser=User does not exist!
+__norefs=1
diff --git a/cluster-shell/lang/en b/cluster-shell/lang/en
@@ -19,3 +19,4 @@ run_enone=No servers to run on selected
 log_clear=Cleared command history
 log_run=Ran $1 on $2 servers
 log_run_l=Ran $1 on $2
+__norefs=1
diff --git a/cluster-software/lang/en b/cluster-software/lang/en
@@ -176,3 +176,4 @@ deletes_rusure=Are you sure you want to uninstall the packages $1 from the selec
 deletes_ok=Delete them all
 
 
+__norefs=1
diff --git a/cluster-useradmin/lang/en b/cluster-useradmin/lang/en
@@ -164,3 +164,4 @@ log_add_group=Added users and groups from hosts in group $1
 log_refresh=Refreshed users and groups
 log_sync=Synchronized users and groups
 
+__norefs=1
diff --git a/cluster-usermin/lang/en b/cluster-usermin/lang/en
@@ -320,3 +320,4 @@ update_onhost=Results of update on $1 ..
 update_failed=.. update failed : $1
 update_none=.. no updates were found.
 
+__norefs=1
diff --git a/cluster-webmin/lang/en b/cluster-webmin/lang/en
@@ -330,3 +330,4 @@ config_have=On servers that have it
 config_group=On members of group $1
 config_on=On $1
 config_err=Failed to save module configuration
+__norefs=1
diff --git a/cpan/lang/en b/cpan/lang/en
@@ -120,3 +120,4 @@ uninstalls_err=Failed to uninstall modules
 uninstalls_enone=None selected
 uninstalls_emod=$1 failed : $2
 uninstalls_rusure=Are you sure you want to un-install the $1 selected modules? $2 sub-modules and $3 files will be removed.
+__norefs=1
diff --git a/cron/lang/en b/cron/lang/en
@@ -176,3 +176,4 @@ range_eend=Missing or invalid ending date in range to run
 
 delete_err=Failed to delete Cron jobs
 delete_enone=None selected
+__norefs=1
diff --git a/custom/lang/en b/custom/lang/en
@@ -156,3 +156,4 @@ srun_cmd=Executing SQL command $1 ..
 srun_eprepare=.. SQL error : $1
 srun_eexecute=.. execution error : $1
 srun_none=.. no results were returned.
+__norefs=1
diff --git a/dfsadmin/lang/en b/dfsadmin/lang/en
@@ -55,3 +55,4 @@ delete_err=Failed to delete shares
 delete_enone=None selected
 
 restart_err=Failed to apply changes
+__norefs=1
diff --git a/dhcp-dns/lang/en b/dhcp-dns/lang/en
@@ -45,3 +45,4 @@ delete_enone=None selected
 
 chooser_ip=Select free IP address
 chooser_none=No free IP addresses were found in any of your subnets!
+__norefs=1
diff --git a/dhcpd/lang/en b/dhcpd/lang/en
@@ -474,3 +474,4 @@ hdelete_rusure3=Are you sure you want to deleted the $2 selected groups? Any hos
 hdelete_ok=Delete Now
 
 
+__norefs=1
diff --git a/dnsadmin/lang/en b/dnsadmin/lang/en
@@ -25,3 +25,4 @@ log_create_record=Created $1 record $2 in zone $3
 log_modify_record=Modified $1 record $2 in zone $3
 log_boot=Created primary configuration file
 
+__norefs=1
diff --git a/dovecot/lang/en b/dovecot/lang/en
@@ -192,3 +192,4 @@ manual_title=Edit Config File
 manual_desc=Editing Dovecot configuration file $1 ..
 manual_err=Failed to save config file
 manual_edata=Nothing entered!
+__norefs=1
diff --git a/export-call/lang/en b/export-call/lang/en
@@ -1,2 +1,3 @@
 my_msg=This is from the other module
 my_subs=Your name in the other module is $1
+__norefs=1
diff --git a/export-test/lang/en b/export-test/lang/en
@@ -1,2 +1,3 @@
 my_msg=Some message here
 my_subs=Your name is $1
+__norefs=1
diff --git a/exports/lang/en b/exports/lang/en
@@ -53,9 +53,9 @@ edit_anonuid=Treat untrusted users as
 edit_default=Default
 edit_anongid=Treat untrusted groups as
 edit_sync=Immediately sync all writes?
-edit_sync1=$yes
-edit_sync2=$no
-edit_sync0=$default
+edit_sync1=Yes
+edit_sync2=No
+edit_sync0=Default
 edit_in=in
 
 save_err=Failed to save export
@@ -85,3 +85,4 @@ log_create=Created NFS export $1
 log_create_l=Created NFS export $1 to $2
 log_apply=Applied configuration
 log_delete_exports=Deleted $1 NFS exports
+__norefs=1
diff --git a/fdisk/lang/en b/fdisk/lang/en
@@ -266,3 +266,4 @@ disk_dsize=<b>Disk size:</b> $1
 disk_model=<b>Make and model:</b> $1
 disk_cylinders=<b>Cylinders:</b> $1
 
+__norefs=1
diff --git a/fetchmail/lang/en b/fetchmail/lang/en
@@ -133,3 +133,4 @@ user_return=user's configuration
 
 email_ok=Fetchmail output
 email_failed=Fetchmail error
+__norefs=1
diff --git a/file/lang/en b/file/lang/en
@@ -263,8 +263,8 @@ acl_button_mount=Mount (mount or un-mount filesystem)
 acl_button_copy=Copy, Cut and Paste
 acl_unarchive=Can extract uploaded archive files?
 acl_unarchive2=Always attempt to
-acl_unarchive1=$yes
-acl_unarchive0=$no
+acl_unarchive1=Yes
+acl_unarchive0=No
 acl_dostounix=Can have Windows newlines converted?
 acl_chroot=Chroot directory for entire file manager
 acl_relto=(relative to any chroot directory)
@@ -429,3 +429,4 @@ extract_yes=Yes, then delete
 extract_show=Show contents
 extract_err2=Failed to get file contents : $1
 extract_shown=Contents of compressed file
+__norefs=1
diff --git a/filter/lang/en b/filter/lang/en
@@ -112,3 +112,4 @@ forward_enabled=Email forwarding enabled?
 forward_to=Forward to addresses
 forward_cont=Also deliver normally?
 forward_err=Failed to save email forwarding
+__norefs=1
diff --git a/firewall/lang/en b/firewall/lang/en
@@ -344,3 +344,4 @@ rename_header=Chain rename options
 rename_adjust=Modify other rules that jump to this chain?
 rename_none=None
 rename_ecannot=You are not allowed to rename chains
+__norefs=1
diff --git a/flashterm/lang/en b/flashterm/lang/en
@@ -2,3 +2,4 @@ index_title=FlashTerm
 index_esocket=Socket failed : $1
 index_eport=Port $1 is already in use, perhaps by another Flash policy server
 index_etelnet=This system is not running a Telnet server on port $1.
+__norefs=1
diff --git a/foobar/lang/en b/foobar/lang/en
@@ -19,3 +19,4 @@ save_egone=Website no longer exists
 log_create=Created website $1
 log_modify=Modified website $1
 log_delete=Deleted website $1
+__norefs=1
diff --git a/format/lang/en b/format/lang/en
@@ -148,3 +148,4 @@ acl_view=Can edit disks and partitions?
 
 ecannot=You are not allowed to edit partitions
 
+__norefs=1
diff --git a/frox/lang/en b/frox/lang/en
@@ -145,3 +145,4 @@ log_stop=Stopped Frox server
 log_start=Started Frox server
 log_apply=Applied configuration
 
+__norefs=1
diff --git a/fsdump/lang/en b/fsdump/lang/en
@@ -227,3 +227,4 @@ email_failed=Backup failed!
 
 newtape_subject=Tape change $1 for backup of $2 on $3
 newtape_body=The backup of $2 on $3 has reached the maximum amount of data allowed on tape $1. You will need to load a new tape and hit the 'Tape Loaded' link in Webmin's Filesystem Backup module for the backup to continue.
+__norefs=1
diff --git a/ftelnet/lang/en b/ftelnet/lang/en
@@ -2,3 +2,4 @@ index_title=FTelnet
 index_esocket=Socket failed : $1
 index_eport=Port $1 is already in use, perhaps by another Flash policy server
 index_etelnet=This system is not running a Telnet server on port $1.
+__norefs=1
diff --git a/grub/lang/en b/grub/lang/en
@@ -74,3 +74,4 @@ log_up_title=Moved up boot option $1
 log_down_title=Moved down  boot option $1
 log_global=Changed global options
 log_install=Installed GRUB
+__norefs=1
diff --git a/heartbeat/lang/en b/heartbeat/lang/en
@@ -102,3 +102,4 @@ start_err=Failed to start heartbeat
 apply_err=Failed to apply changes
 apply_epid=Process is no longer running
 
+__norefs=1
diff --git a/help/lang/en b/help/lang/en
@@ -18,3 +18,4 @@ search_mod=Module
 search_page=Help page
 search_line=Match on
 search_results=Webmin help pages matching $1
+__norefs=1
diff --git a/hpuxexports/lang/en b/hpuxexports/lang/en
@@ -75,3 +75,4 @@ log_delete_l=Deleted NFS export $1 to $2
 log_create=Created NFS export $1
 log_create_l=Created NFS export $1 to $2
 log_apply=Applied configuration
+__norefs=1
diff --git a/htaccess-htpasswd/lang/en b/htaccess-htpasswd/lang/en
@@ -123,3 +123,4 @@ search_noprot=Skipping Apache options file $1, as it does not protect the direct
 search_open=Could not open Apache options file $1 : $2
 search_done=.. done
 
+__norefs=1
diff --git a/htpasswd-file/lang/en b/htpasswd-file/lang/en
@@ -53,3 +53,4 @@ log_create=Created user $1
 log_delete=Deleted user $1
 log_modify=Modified user $1
 
+__norefs=1
diff --git a/idmapd/lang/en b/idmapd/lang/en
@@ -9,3 +9,4 @@ nobody_group=Nobody group
 save=Save config and restart daemon
 save_err=Failed to save config file $1
 error_dir=Directory $1 does not exist
+__norefs=1
diff --git a/inetd/lang/en b/inetd/lang/en
@@ -105,3 +105,4 @@ log_create_rprog_l=Created RPC $1 number $2 for program $3
 log_modify_rprog_l=Modified RPC $1 number $2 for program $3
 log_delete_rprog_l=Deleted RPC $1 number $2 for program $3
 
+__norefs=1
diff --git a/init/lang/en b/init/lang/en
@@ -164,3 +164,4 @@ change_err=You are not allowed to switch runlevels
 change_title=Switch Runlevel
 change_cmd=Switching to runlevel $1 with command $2. This may take some time, and Webmin might not be available anymore after switching.
 
+__norefs=1
diff --git a/inittab/lang/en b/inittab/lang/en
@@ -20,7 +20,7 @@ inittab_powerokwait=Power is restored
 inittab_powerfailnow=Power fail
 inittab_ctrlaltdel=Ctrl-Alt-Del
 inittab_kbdrequest=Special key combination
-inittab_kbrequest=$inittab_kbdrequest
+inittab_kbrequest=Special key combination
 inittab_return=process list
 inittab_apply=Apply Init Configuration
 inittab_applymsg=Click this button to apply the current SysV Init Configuration by running the command <tt>telinit q</tt>. Be aware that any mistakes in your configuration may make the system unusable when this command is run.
@@ -51,3 +51,4 @@ apply_err=Failed to apply configuration
 delete_err=Failed to delete processes
 delete_enone=None selected
 
+__norefs=1
diff --git a/ipfw/lang/en b/ipfw/lang/en
@@ -235,3 +235,4 @@ add_emissing=Server $1 does not have the IPFW firewall setup
 add_ok=Added $1, with $2 active firewall rules.
 
 
+__norefs=1
diff --git a/jabber/lang/en b/jabber/lang/en
@@ -119,3 +119,4 @@ stop_err=Failed to stop Jabber
 stop_epid=Failed to find Jabber process
 start_err=Failed to start Jabber
 
+__norefs=1
diff --git a/krb5/lang/en b/krb5/lang/en
@@ -15,3 +15,4 @@ default_admin=Admin server
 default_domain=Default domain name
 
 save=Update Configuration
+__norefs=1
diff --git a/lang/en b/lang/en
@@ -349,3 +349,4 @@ sql_eldapconnect=Failed to connect to LDAP server $1
 sql_eldaptls=Failed to start TLS encryption for LDAP : $1
 sql_eldaplogin=Failed to login to LDAP server as $1 : $2
 
+__norefs=1
diff --git a/ldap-client/lang/en b/ldap-client/lang/en
@@ -149,9 +149,9 @@ desc_amd.master=Automounter maps
 desc_auto_home=Automounter home
 desc_auto_master=Automounter maps
 desc_auto_local=Automounter local
-desc_auto.home=$desc_auto_home
-desc_auto.master=$desc_auto_master
-desc_auto.local=$desc_auto_local
+desc_auto.home=Automounter home
+desc_auto.master=Automounter maps
+desc_auto.local=Automounter local
 desc_automount=Automounter maps
 desc_netgroup=Netgroups
 desc_netgrp=Netgroups
@@ -217,3 +217,4 @@ check_match=Looking for Unix user $1 ..
 check_ematch=.. user does not exist.
 check_matched=.. user found successfully.
 check_done=Your system has been successfully configured as an LDAP client!
+__norefs=1
diff --git a/ldap-server/lang/en b/ldap-server/lang/en
@@ -31,7 +31,7 @@ connect_elogin=Failed to login to LDAP server $1 as $2 : $3
 connect_cpan=You can have the <tt>$1</tt> Perl module <a href='$2'>automatically installed</a> from CPAN.
 
 slapd_title=OpenLDAP Server Configuration
-ldif_title=$slapd_title
+ldif_title=OpenLDAP Server Configuration
 slapd_header=Global LDAP server options
 slapd_suffix=Root DN for LDAP database
 slapd_rootdn=Administration login DN
@@ -265,7 +265,7 @@ gencert_edest=Destination directory does not exist
 perms_err=Failed to fix file ownership
 
 acl_slapd=Can configure LDAP server?
-acl_ldif=$acl_slapd
+acl_ldif=Can configure LDAP server?
 acl_schema=Can manage schema?
 acl_acl=Can edit access control?
 acl_browser=Can browse and edit database?
@@ -322,3 +322,4 @@ eacl_efilter=Missing or invalid filter - should be like <tt>(objectClass=posixAc
 eacl_eattrs=Missing or invalid comma-separated list of attributes
 eacl_ewho=Missing or invalid-looking DN in row $1
 eacl_eaccess=Missing or invalid access level in row $1
+__norefs=1
diff --git a/ldap-useradmin/lang/en b/ldap-useradmin/lang/en
@@ -94,3 +94,4 @@ raw_for=For $1
 batch_samba=Create Samba account for new users?
 batch_descafter3=In <b>create</b> and <b>modify</b> lines, you can optionally append extra fields containing LDAP atttributes in <i>name</i>=<i>value</i> format, to be assigned to the new or modified users.
 batch_eattr=Invalid LDAP attribute at line $1 : $2
+__norefs=1
diff --git a/lilo/lang/en b/lilo/lang/en
@@ -95,3 +95,4 @@ log_apply=Applied configuration
 log_global=Changed global options
 
 
+__norefs=1
diff --git a/link/lang/en b/link/lang/en
@@ -4,3 +4,4 @@ index_evirtualmin=The URL contains Virtualmin-specific variables, but no server
 
 acl_link=Redirect to URL
 acl_elink=Missing URL to redirect to
+__norefs=1
Original file line number	Diff line number	Diff line change
Expand Up		@@ -65,3 +65,4 @@ log_bootup=Enabled ADSL at boot time
		log_bootdown=Disabled ADSL at boot time
		log_setup=Set up default configuration

		__norefs=1
Original file line number	Diff line number	Diff line change
Expand Up		@@ -119,3 +119,4 @@ email_pre=Running pre-backup command $1 ..
		email_post=Running post-backup command $1 ..
		email_prefailed=Pre-backup command failed!

		__norefs=1
Original file line number	Diff line number	Diff line change
Expand Up		@@ -82,3 +82,4 @@ rotate_title=Updating Statistics
		rotate_doing=Processing logged network traffic ..
		rotate_done=.. done.

		__norefs=1
Original file line number	Diff line number	Diff line change
Expand Up		@@ -47,3 +47,4 @@ save_esame1=The directory <tt>$1</tt> is already being exported to <tt>$2</tt>.
		save_esame2=The directory <tt>$1</tt> is already being exported to <tt>$2</tt>. Your operating system does not allow directories on the same <i>local</i> filesystem to be exported to the same network separately

		restart_err=Failed to apply changes
		__norefs=1
Original file line number	Diff line number	Diff line change
Expand Up		@@ -147,3 +147,4 @@ acl_dirs=Allow directories for source files
		delete_err=Failed to delete burn profiles
		delete_enone=None selected

		__norefs=1
Original file line number	Diff line number	Diff line change
Expand Up		@@ -36,3 +36,4 @@ acl_lang=Can change language?
		acl_theme=Can change theme?
		acl_pass=Can change password (when set in Webmin) ?

		__norefs=1
Original file line number	Diff line number	Diff line change
Expand Up		@@ -66,3 +66,4 @@ email_subject_failed=Cluster copy of $1 failed
		delete_err=Failed to delete copies
		delete_enone=None selected

		__norefs=1
Original file line number	Diff line number	Diff line change
Expand Up		@@ -33,3 +33,4 @@ log_deletes=Deleted $1 cluster cron jobs

		delete_err=Failed to delete cluster cron jobs
		delete_enone=None selected
		__norefs=1
Original file line number	Diff line number	Diff line change
Expand Up		@@ -176,3 +176,4 @@ deletes_rusure=Are you sure you want to uninstall the packages $1 from the selec
		deletes_ok=Delete them all


		__norefs=1
Original file line number	Diff line number	Diff line change
Expand Up		@@ -164,3 +164,4 @@ log_add_group=Added users and groups from hosts in group $1
		log_refresh=Refreshed users and groups
		log_sync=Synchronized users and groups

		__norefs=1