The Insnrg custom integration sets up 40 sensors:

• SPA
• Filter Mode
• All Auto
• Set Spa Temperature
• Set Pool Temperature
• Current pH
• Set Point pH
• Current ORP
• Set Point ORP
• pH Connected
• ORP Connected
• Pool Current Temperature
• Outlet data for each of the 3 Vi-Outlets and 4 Hub-Outlets:
  • Waterfall, Jet Pump, Lights, In Floor, Ozone, Blower
• Valve data for each of the 3 Vi-Valves and 4 Hub-Valves
  • Waterfall, Feature
• Timer data for each of the 4 timers:
  • Chlorinator
  • Enabled
• VF Contact data for each of the 1 Vi-VF Contact and 3 Hub-VF Contacts:
  • Heat Pump, Gas
• Pump Speed
• Chlorinator

This guide will walk you through the steps to install and set up the Insnrg custom integration in Home Assistant via the Home Assistant Community Store (HACS).

• Home Assistant must already be installed and configured on your system.
• HACS should be installed. If not, follow the instructions at HACS Installation.
• NOTES: Please contact [email protected] to request access to Insnrg 3rd Party REST API, and enable Voice Control in Connected Systems screen.

• In Home Assistant, navigate to the side menu and click on "HACS".

• Click on the three dots menu at the top right in HACS.
• Select "Custom Repositories".

• In the "Add Custom Repository URL" field, paste the following URL:

  https://github.com/jaringuyen/InsnrgHomeAssistance
  

• Under "Category", select "Integration".
• Click on "Add".

• After adding, the integration should be available in HACS.
• Search for "insnrg" in the HACS integrations list.
• Click on the integration and then click "Install this repository".
• Confirm the installation by clicking "Install".

• After installation, you need to restart Home Assistant to load the integration.
• Go to "Settings" > "System" > "Restart" and click on "Restart".

• After the restart, navigate to "Settings" > "Devices & Services".
• Click on "Add Integration" (the "+" symbol at the bottom right).
• Search for "insnrg".
• Select the integration from the list.

• Enter your email address and password that you use to log in to https://www.insnrgapp.com.
• Click "Submit" or "Next" to complete the setup.

• After successful setup, the sensors for your chlorinator will be created.
• You can view them under "Settings" > "Devices & Services".
• Add the desired sensors to your dashboard to display the data.

If you have any issues with Insnrg entities, please try to Reload the integration. To reload a HACS integration in Home Assistant, follow these steps:

• Open Home Assistant and go to Settings > Devices & Services.
• Find the integration you want to reload.
• Click on the three-dot menu (⋮) next to the integration.
• Select Reload from the menu.
• If the integration doesn't support reloading, you might need to restart Home Assistant.