A fast and feature-rich implementation of an ESP8266/ESP32 webserver to control NeoPixel (WS2812B, WS2811, SK6812, APA102) LEDs or also SPI based chipsets like the WS2801!
- WS2812FX library integrated for over 100 special effects
- FastLED noise effects and 50 palettes
- Modern UI with color, effect and segment controls
- Segments to set different effects and colors to parts of the LEDs
- Settings page - configuration over network
- Access Point and station mode - automatic failsafe AP
- Support for RGBW strips
- 16 user presets to save and load colors/effects easily, supports cycling through them.
- Macro functions to automatically execute API calls
- Nightlight function (gradually dims down)
- Full OTA software updatability (HTTP + ArduinoOTA), password protectable
- Configurable analog clock + support for the Cronixie kit by Diamex
- Configurable Auto Brightness limit for safer operation
- WLED app for Android and iOS
- JSON and HTTP request APIs
- MQTT
- Blynk IoT
- E1.31, Art-Net and TPM2.net
- Hyperion
- UDP realtime
- Alexa voice control (including dimming and color)
- Sync to Philips hue lights
- Adalight (PC ambilight via serial) and TPM2
- Sync color of multiple WLED devices (UDP notifier)
- Infrared remotes (24-key RGB, receiver required)
- Simple timers/schedules (time from NTP, timezones/DST supported)
See the wiki!
DrZzs has made some excellent video guides:
Introduction, hardware and installation
Settings, tips and tricks
If you'd rather read, here is a very detailed step-by-step beginner tutorial by tynick!
Russian speakers, check out the videos by Room31:
WLED Firmware Overview: Interface and Settings
ESP8266 based LED controller for WS2812b strip. WLED Firmware + OpenHAB
| Type | Voltage | Comments |
|---|---|---|
| WS2812B | 5v | |
| WS2813 | 5v | |
| SK6812 | 5v | RGBW |
| APA102 | 5v | C/D |
| WS2801 | 5v | C/D |
| LPD8806 | 5v | C/D |
| TM1814 | 12v | RGBW |
| WS2811 | 12v | 3-LED segments |
| WS2815 | 12v | |
| GS8208 | 12v |
| Brand | Model | Comments |
|---|---|---|
| Corsair | HD120 Fan | Uses WS2812B, data-in only |
| PCCOOLER | Moonlight 5-pack Fans | Uses WS2812B, includes Data-out connector to keep each fan uniquely addressable if wired in series like traditional LED strips |
| Any | 5v 3-pin ARGB for PC | Any PC RGB device that supports the 5v 3-pin ARGB motherboard header should work fine with WLED. All the major motherboard vendors support the Corsair HD120 and PCCOOLER fans listed, so we can safely assume any device that supports motherboard ARGB 5V 3-Pin standard will work with WLED. |
Licensed under the MIT license
Credits here!
Uses Linearicons by Perxis!
Join the Discord server to discuss everything about WLED!
Check out the WLED Discourse forum!
You can also send me mails to [email protected], but please only do so if you want to talk to me privately.
If WLED really brightens up your every day, you can
Disclaimer:
If you are sensitive to photoeleptic seizures it is not recommended that you use this software.
In case you still want to try, don't use strobe, lighting or noise modes or high effect speed settings.
As per the MIT license, i assume no liability for any damage to you or any other person or equipment.