Update docs

pczhao1210 · Feb 25, 2024 · 56aa680 · 56aa680
1 parent d56472d
commit 56aa680
Show file tree

Hide file tree

Showing 2 changed files with 6 additions and 6 deletions.
diff --git a/docs/advanced-usage-zh.md b/docs/advanced-usage-zh.md
@@ -281,11 +281,11 @@ iptables -t nat -A PREROUTING -i "$netif" ! -s 192.168.43.0/24 -p udp --dport 12
 
 ## VPN 分流
 
-在启用 VPN 分流 (split tunneling) 时，VPN 客户端将仅通过 VPN 隧道发送特定目标子网的流量。其他流量 **不会** 通过 VPN 隧道。VPN 分流有一些局限性，而且并非所有的 VPN 客户端都支持。
+在启用 VPN 分流 (split tunneling) 时，VPN 客户端将仅通过 VPN 隧道发送特定目标子网的流量。其他流量 **不会** 通过 VPN 隧道。这允许你通过 VPN 安全访问指定的网络，而无需通过 VPN 发送所有客户端的流量。VPN 分流有一些局限性，而且并非所有的 VPN 客户端都支持。
 
 高级用户可以为 [IPsec/XAuth ("Cisco IPsec")](clients-xauth-zh.md) 和/或 [IKEv2](ikev2-howto-zh.md) 模式启用 VPN 分流。这是可选的。IPsec/L2TP 模式不支持此功能（Windows 除外，见下文）。
 
-<details open>
+<details>
 <summary>
 IPsec/XAuth ("Cisco IPsec") 模式：启用 VPN 分流 (split tunneling)
 </summary>
@@ -302,7 +302,7 @@ IPsec/XAuth ("Cisco IPsec") 模式：启用 VPN 分流 (split tunneling)
    ```
 </details>
 
-<details open>
+<details>
 <summary>
 IKEv2 模式：启用 VPN 分流 (split tunneling)
 </summary>

diff --git a/docs/advanced-usage.md b/docs/advanced-usage.md
@@ -281,11 +281,11 @@ If you want the rules to persist after reboot, you may add these commands to `/e
 
 ## Split tunneling
 
-With split tunneling, VPN clients will only send traffic for a specific destination subnet through the VPN tunnel. Other traffic will NOT go through the VPN tunnel. Split tunneling has some limitations, and is not supported by all VPN clients.
+With split tunneling, VPN clients will only send traffic for a specific destination subnet through the VPN tunnel. Other traffic will NOT go through the VPN tunnel. This allows you to gain secure access to a network through your VPN, without routing all your client's traffic through the VPN. Split tunneling has some limitations, and is not supported by all VPN clients.
 
 Advanced users can optionally enable split tunneling for the [IPsec/XAuth ("Cisco IPsec")](clients-xauth.md) and/or [IKEv2](ikev2-howto.md) modes. IPsec/L2TP mode does not support this feature (except on Windows, see below).
 
-<details open>
+<details>
 <summary>
 IPsec/XAuth ("Cisco IPsec") mode: Enable split tunneling
 </summary>
@@ -302,7 +302,7 @@ The example below **ONLY** applies to IPsec/XAuth ("Cisco IPsec") mode. Commands
    ```
 </details>
 
-<details open>
+<details>
 <summary>
 IKEv2 mode: Enable split tunneling
 </summary>