English | 简体中文

Speed up your nodes with Amazon CDN (CloudFront)

1. Thanks to XrayR all authors for their contributions
2. Thanks to XrayR-release for the one-click script
3. This script is based on XrayR-release.
4. Only For V2Board.
5. Support for any protocol.
6. This repository uses the latest version of XrayR by default

• Support for TLS, such as TCP-TLS, WebSocket-TLS, gRPC-TLS and Trojan-TLS.
• If you are using the TLS protocol, use the following command to request a certificate. (Before applying, make sure that the domain name has resolved to an IP and that port 80 of the server is not occupied, and temporarily stop the Nginx service.)

bash <(curl -Ls https://cdn.jsdelivr.net/gh/missuo/AutoApplyCert/apply.sh)

• Switch to the latest official version.

• Remove the autonomy to choose whether to enable AEAD encryption and force AEAD to be enabled

• Author delete library, this script enable backup solution, not affected
• My XrayR backup

• Added ARM64 support (e.g. Oracle ARM can be installed perfectly)

• Modified AEAD encryption default selection (on by default if not entered)

• Option to turn off AEAD encryption (on by default in official script, off by default in this script)

• Optionally V2ray, Shadowsocks, Trojan (official script default V2ray, this script default V2ray)

• Complete the script

XrayR-project/XrayR

XrayR-project/XrayR-release

1. No need to configure panel URL and TOKEN each time (permanent once)
2. No need to change the node ID in the configuration file

1. Fork this repository and modify the config.yml file, only the following two lines need to be modified.

ApiHost: "YOUR_PANEL_URL" # Modify here
ApiKey: "YOUR_TOKEN" # Modify here

2. Modify line 213 of the install.sh file to change the username missuo to your own GitHub username.

wget https://cdn.jsdelivr.net/gh/missuo/XrayR-V2Board/config.yml -O /etc/XrayR/config.yml

3. Change the username missuo in the link below to your own GitHub username to complete the configuration of the one-click install script command.

bash <(curl -Ls https://cdn.jsdelivr.net/gh/missuo/XrayR-V2Board/install.sh)

4. Complete the basic node information on the V2Board panel.
5. Record your node ID.
6. Execute the above one-click install command on your VPS, it will install fully automatically and you will be prompted to enter your node ID.

Since your repository may be public after you Fork this repository. Modifying the configuration file directly may expose your panel's key information. We recommend downloading config.yml and uploading it to your own server after modifying the information. And fill in the install.sh with your own config file download link. Finally, upload install.sh to your own server to generate your own one-click installation command.