Skip to content

shegerlab2023/ansible-nagios

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

ansible-nagios

Playbook for setting up the Nagios monitoring server and clients (CentOS/Rocky/RHEL/Fedora/FreeBSD)

Nagios

GA

What does it do?

  • Automated deployment of Nagios Server on CentOS7, Rocky 8/9 or RHEL 7/8/9
  • Automated deployment of Nagios client on CentOS6/7/8, RHEL6/7/8/9 or Rocky, Fedora and FreeBSD
    • Generates service checks and monitored hosts from Ansible inventory
    • Generates comprehensive checks for the Nagios server itself
    • Generates comprehensive checks for all hosts/services via NRPE
    • Generates most of the other configs based on jinja2 templates
    • Wraps Nagios in SSL via Apache
    • Sets up proper firewall rules (firewalld or iptables-services)
    • Support sending alerts via email and outgoing webhooks.
    • This is also available via Ansible Galaxy

How do I use it?

  • Add your nagios server under [nagios] in hosts inventory
  • Add respective services/hosts under their inventory group, hosts can only belong under one group.
  • Take a look at install/group_vars/all.yml to change anything like email address, nagios user, guest user etc.
  • Run the playbook. Read below for more details if needed.

Requirements

  • CentOS7 or RHEL7/8/9 or Rocky 8/9 for Nagios server only (for now).
  • RHEL6/7/8/9, CentOS6/7/8/9, Fedora or FreeBSD for the NRPE Nagios client
  • If you require SuperMicro server monitoring via IPMI (optional) then do the following
    • Installperl-IPC-Run and perl-IO-Tty RPMs for RHEL7 for optional IPMI sensor monitoring on SuperMicro.
      • I've placed them here if you can't find them, CentOS7 has them however.
    • Modify install/group_vars/all.yml to include supermicro_enable_checks: true
  • Please note I'll likely remove IPMI sensor monitoring support because it's a real pain and not that reliable, SNMP with MiB is better.

Notes

  • Sets the nagiosadmin password to changeme, you'll want to change this.
  • Creates a read-only user, set nagios_create_guest_user: false to disable this in install/group_vars/all.yml
  • You can turn off creation/management of firewall rules via install/group_vars/all.yml
  • Adding new hosts to inventory file will just regenerate the Nagios configs

Supported Service Checks

  • Implementation is very simple, with the following resource/service checks generated:
    • Generic out-of-band interfaces (ping, ssh, http)
    • Generic Linux servers (ping, ssh, load, users, procs, uptime, disk space, swap, zombie procs)
    • Generic Linux servers with MDADM RAID (same as above)
    • ELK servers (same as servers plus elasticsearch and Kibana)
    • Elasticsearch (same as servers plus TCP/9200 for elasticsearch)
    • Webservers (same as servers plus 80/TCP for webserver)
    • Webservers with SSL certificate checking (same as webservers plus checks SSL certificate validity/expiration)
    • DNS Servers (same as servers plus UDP/53 for DNS)
    • DNS Servers with MDADM RAID (same as above)
    • DNS Service Only (DNS and ICMP check)
    • Jenkins CI (same as servers plus TCP/8080 for Jenkins and optional nginx reverse proxy with auth)
    • FreeNAS Appliances (ping, ssh, volume status, alerts, disk health)
    • Network switches (ping, ssh)
    • IoT and ping-only devices (ping)
    • Dell iDRAC server checks via @dangmocrang check_idrac
      • You can select which checks you want in install/group_vars/all.yml
        • CPU, DISK, VDISK, PS, POWER, TEMP, MEM, FAN
    • SuperMicro server checks via the IPMI interface.
      • CPU, DISK, PS, TEMP, MEM: or anything supported via freeipmi sensors.
      • *Note: This is not the best way to monitor things, SNMP checks are WIP once we purchase licenses for them for our systems
  • contacts.cfg notification settings are in install/group_vars/all.yml and templated for easy modification.

Nagios Server Instructions

  • Clone repo and setup your Ansible inventory (hosts) file
git clone https://github.com/sadsfae/ansible-nagios
cd ansible-nagios
sed -i 's/host-01/yournagioshost/' hosts
  • Add any hosts for checks in the hosts inventory
  • The same host can only belong to one host inventory category
  • Note that you need to add ansible_host entries only for IP addresses for idrac, switches, out-of-band interfaces and anything that typically doesn't support Python and Ansible fact discovery.
  • Anything not an idrac, switch or oobserver should use the FQDN (or an /etc/hosts entry) for the inventory hostname or you may see this error:
    • AnsibleUndefinedVariable: 'dict object' has no attribute 'ansible_default_ipv4'}
[webservers]
webserver01

[switches]
switch01 ansible_host=192.168.0.100
switch02 ansible_host=192.168.0.102

[oobservers]
webserver01-ilo ansible_host=192.168.0.105

[servers]
server01

[servers_with_mdadm_raid]

[jenkins]
jenkins01

[dns]

[dns_with_mdadm_raid]

[idrac]
database01-idrac ansible_host=192.168.0.106

[supermicro-6048r]
web01-supermicro-ipmi ansible_host=192.168.0.108

[supermicro-6018r]

[supermicro-1028r]

  • Run the playbook
ansible-playbook -i hosts install/nagios.yml

Known Issues

  • If you're using a non-root Ansible user you will want to edit install/group_vars/all.yml setting, e.g. AWS EC2:
ansible_system_user: ec2-user
  • SELinux doesn't always play well with Nagios, or the policies may be out of date as shipped with CentOS/RHEL.
avc: denied { create } for pid=8800 comm="nagios" name="nagios.qh
  • If you see this (or nagios doesn't start) you'll need to create an SELinux policy module.
# cat /var/log/audit/audit.log | audit2allow -M mynagios
# semodule -i mynagios.pp

Now restart Nagios and Apache and you should be good to go.

systemctl restart nagios
systemctl restart httpd

If all else fails set SELinux to permissive until it's running then run the above command again.

setenforce 1
  • If you have errors on RHEL7 you may need a few Perl packages if you opted to include SuperMicro monitoring via:
supermicro_enable_checks: true

Mass-generating Ansible Inventory

If you're using something like QUADS to manage your infrastructure automation scheduling you can do the following to generate all of your out-of-band or iDRAC interfaces.

quads-cli --ls-hosts | sed -e 's/^/mgmt-/g' > /tmp/all_ipmi_2019-10-23
for ipmi in $(cat all_ipmi_2019-10-23); do printf $ipmi ; echo " ansible_host=$(host $ipmi | awk '{print $NF}')"; done > /tmp/add_oobserver

Now you can paste /tmp/add_oobserver under the [oobservers] or [idrac] Ansible inventory group respectively.

Demonstration

  • You can view a video of the Ansible deployment here:

Ansible Nagios

iDRAC Server Health Details

  • The iDRAC health checks are all optional, you can pick which ones you want to monitor.

CHECK

  • The iDRAC health check will provide exhaustive health information and alert upon it.

iDRAC

Files

.
├── hosts
├── install
│   ├── group_vars
│   │   └── all.yml
│   ├── nagios.yml
│   └── roles
│       ├── firewall
│       │   └── tasks
│       │       └── main.yml
│       ├── firewall_client
│       │   └── tasks
│       │       └── main.yml
│       ├── instructions
│       │   └── tasks
│       │       └── main.yml
│       ├── nagios
│       │   ├── files
│       │   │   ├── check_ipmi_sensor
│       │   │   ├── idrac_2.2rc4
│       │   │   ├── idrac-smiv2.mib
│       │   │   ├── nagios.cfg
│       │   │   └── nagios.conf
│       │   ├── handlers
│       │   │   └── main.yml
│       │   ├── tasks
│       │   │   └── main.yml
│       │   └── templates
│       │       ├── cgi.cfg.j2
│       │       ├── check_freenas.py.j2
│       │       ├── commands.cfg.j2
│       │       ├── contacts.cfg.j2
│       │       ├── devices.cfg.j2
│       │       ├── dns.cfg.j2
│       │       ├── dns_with_mdadm_raid.cfg.j2
│       │       ├── elasticsearch.cfg.j2
│       │       ├── elkservers.cfg.j2
│       │       ├── freenas.cfg.j2
│       │       ├── idrac.cfg.j2
│       │       ├── ipmi.cfg.j2
│       │       ├── jenkins.cfg.j2
│       │       ├── localhost.cfg.j2
│       │       ├── oobservers.cfg.j2
│       │       ├── servers.cfg.j2
│       │       ├── servers_with_mdadm_raid.cfg.j2
│       │       ├── services.cfg.j2
│       │       ├── supermicro_1028r.cfg.j2
│       │       ├── supermicro_6018r.cfg.j2
│       │       ├── supermicro_6048r.cfg.j2
│       │       ├── switches.cfg.j2
│       │       └── webservers.cfg.j2
│       └── nagios_client
│           ├── files
│           │   ├── bsd_check_uptime.sh
│           │   └── check_raid
│           ├── handlers
│           │   └── main.yml
│           ├── tasks
│           │   └── main.yml
│           └── templates
│               └── nrpe.cfg.j2
├── meta
│   └── main.yml
└── tests
    └── test-requirements.txt

21 directories, 43 files

About

✅ Ansible playbook for setting up the Nagios monitoring system and clients.

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • Shell 57.2%
  • Jinja 23.7%
  • Python 11.8%
  • Perl 7.3%