सामग्री पर जाएँ

आकृति:Infobox protected area/doc

मैथिली विकिपिडियासँ, एक मुक्त विश्वकोश

This template can be used to generate an infobox for a protected area. It is part of the Protected areas WikiProject.

These selected parameters can be used to form a completely functional infobox and the extra parameters listed below can also be added. This markup can be pasted into a new article. See below for working examples.

Basic usage
{{Infobox protected area
| name = 
| alt_name = 
| iucn_category = 
| photo = 
| photo_alt = 
| photo_caption = 
| photo_width = 
| map = 
| map_alt = 
| map_caption = 
| map_width = 
| relief =
| label =
| label_position =
| mark =
| marker_size =
| location = 
| nearest_city = 
| lat_d = 
| lat_m = 
| lat_s = 
| lat_NS = 
| long_d = 
| long_m = 
| long_s = 
| long_EW = 
| coords = 
| coords_ref = 
| region = 
| area = 
| designation =
| authorized =
| created =
| established = 
| designated =
| visitation_num = 
| visitation_year = 
| visitation_ref =
| governing_body = 
| administrator =
| operator =
| owner =
| world_heritage_site =
| website = 
| url = 
| child = 
| embedded = 
}}
Full code

Parameter descriptions

[सम्पादन करी]

This table describes all parameters which can be used in building infoboxes. Only the name parameter must be assigned a value.

Field name Description
name Required. The official name of the protected area. It will be displayed at the top of the infobox. In most cases this should be the same as the article name less any disambiguation. For example if the article title is Mount Washington (New Hampshire) then name=Mount Washington.
alt_name If there is a common English name for the area use for the name parameter. This parameter can be used to display the name in the local language or for an alternate English name if it is commonly used. If you would like to italicize the text use wiki markup.
iucn_category Strongly recommended. The IUCN category associated with the protected area. Valid values are Ia, Ib, II, III, IV, V, or VI. See IUCN Categories.
photo The name of an image file to be displayed. No special formatting is needed.
photo_width Can be used to change the display width the image. The default and maximum value is 284px. Images with a horizontal orientation (landscape mode) will generally display well at the default setting. An image with vertical orientation (portrait mode) may need to be adjusted to 180px or 220px. For example photo_width=200 and not photo_width=200px.
photo_alt Alt text for the photo, for visually impaired readers. See WP:ALT.
photo_caption The caption which will appear below the image if one is required.
map The name of the map to be displayed. See Map display methods.
map_width Width to display the map image in pixels. The default and maximum is 284, but usually the map should be much smaller. For example: map_width=200 (not map_width=200px). If a location map template is used the map size might be scaled automatically if no width is specified.
map_alt Alternative text for the map inage, see WP:ALT.
map_caption Text to be displayed below the map image, if required.
relief When the geographical coordinates method is used (see Map display methods), any non-blank value (yes, 1, etc.) will cause the template to display a relief map image, where available. For additional information, see Template:Location map#Relief parameter.
label A text message that will be displayed next to the marker. Works with label_position below.
label_position Specifies the position of a label with respect to the marker. This is not functional when using the XY method for map display. It must be assigned a value or no label will not display. Valid values are left, right, top and bottom. See label above.
mark The image to use for the marker. The default is Red pog.svg, unless map=us locator blank.svg in which case the default is Green pog.svg. See Template:Infobox_map#Marks for more information.
marker_size The display width of the marker image in pixels. The default value is 8.
location The location of the protected area. Don't be too precise. County, state and country are good in the USA. If the area is within a city specify the city, state and country. If the area is in multiple counties just list the state and country. For areas in other countries adjust accordingly.
nearest_city
nearest_town
Recommended if the area is not within a city or town. It could be a city with a major airport or a large gateway town where supplies and lodging are available. Use the most appropriate parameter.
coords For the {{Coord}} template. Will not generate a marker on a map. See below. When this option is used the type, region, scale, source, format and display parameters are not functional but this data can be entered in the {{Coord}} template. The defaults should be type:landmark and display:inline,title.
lat_d The degrees of latitude. This value can be specified as a decimal degree and when this format is used minutes and seconds should not be specified.
lat_m The minutes of latitude.
lat_s The seconds of latitude.
lat_NS N if north of the equator, S if south of the equator. Other values will be disregarded.
long_d The degrees of longitude. This value can be specified as a decimal degree and when this format is used minutes and seconds should not be specified.
long_m The minutes of longitude.
long_s The seconds of longitude.
long_EW E if east of the prime meridian, W if west of the prime meridian. Other values will be disregarded.
coords_ref Can be used with either coordinate display method above. Strongly recommended. Specify a citation for the coordinates using <ref>...</ref> tags.
type Type is one way to specify the scale of maps generated by external map websites. See type for valid values. The default value is landmark. If no type is appropriate consider using the scale parameter below.
scale Determines the zoom factor for external map websites. See scale. The value is 1:10,000 for the default type which is landmark. Using scale=50000 will change the zoom to 1:50,000.
region A country code. See ISO 3166-2:US, ISO 3166-2 and ISO 3166-1 alpha-2. For example US-OR is the code for Oregon. This computer readable code is recommended. It will not be displayed. See region.
source Source of the coordinate data. See source. For example GNIS or NGS, etc. It will not be displayed. Not all possible values are recognized.
format Determines the format of the coordinates displayed. Valid values are dms for degrees, minutes and seconds, and dec for decimal degrees. The default value is dms.
display Determines where the coordinates will be displayed. Valid values are inline and inline,title and their variants. The default is inline,title and is recommended.
x
y
Specifies the position of the location marker on a map image. The coordinates of the marker in pixels based on a map with a width of 1000 pixels. The template will scale these values for proper display. See below.
x%
y%
Specifies the position of the location marker on a map image. x% specifies the percentage of the distance across the image from the left edge and y% specifies the percentage of the distance down from the top edge. See below.
area Area of the protected area. Usually in acres or square miles for US locations and hectares or square kilometres elsewhere. The {{Convert}} template should be used. Very small areas might be specified in square feet, square yards or square metres.
designation
authorized
created
established
designated
The date the protected area was created. See below. Use {{Start date}}. For example, for Yosemite National Park, use {{Start date|1890|10|1}}.
visitation_num The number of visitors in a recent year if known.
visitation_year The year during which the number of visitors was counted.
visitation_ref Used with the visitation parameters above. Highly recommended. Specify the a citation for the visitation data using <ref>...</ref> tags.
governing_body
administrator
operator
owner
The agency or organization which controls or owns the protected area. See below.
world_heritage_site The year the protected area was designated a World Heritage Site. Few areas have this designation. If the article uses {{Infobox World Heritage Site}} then this parameter should not be used.
website The full URL of the official website with no formatting. For example: http://www.example.org/.
url Displays a url with no label.
child Set to "yes" if this infobox is embedded inside another infobox.
embedded Another infobox to place within this infobox. It will show up at the bottom. It needs to have its "embed" or "child" parameter set to 1 or yes, as appropriate.

Alternate parameters

[सम्पादन करी]

A few cells allow alternate parameter names which can be used to generate an appropriate label. Editors should probably not be overly concerned with using the correct label unless using the wrong label would be a blatant error.

Protected areas are often created as the result of a governmental procedure. For example, in the United States, national parks are established by an act of congress, National Monuments are usually created by presidential proclamation, and wilderness areas are designated by an act of congress. National Park Service Affiliated Areas are authorized.

authorized → Authorized
created → Created
designated → Designated
established → Established

Some areas are privately owned, and it might be inappropriate to use the label Governing body. For example, the Aleutian World War II National Historic Area is affiliated with the National Park Service but is owned by the Ounalashka Corporation. Chimney Rock National Historic Site is operated by Nebraska State Historical Society.

governing_body → Governing body
administrator → Administrator
operator → Operator
owner → Owner

Depending on the value of the iucn_category parameter, one of the following banners will be displayed below the name. Valid values are Ia, Ib, II, III, IV, V and VI. For more information read the World Commission on Protected Areas article,

आइयुसिएन श्रेणी आइभी (आदत/प्रजाति प्रबन्धन क्षेत्र)
आइयुसिएन श्रेणी V (protected landscape/seascape)
आइयुसिएन श्रेणी VI (प्राकृतिक स्रोतक दिगो उपयोग सहितक संरक्षित क्षेत्र)

See Template:Infobox map/coordinate syntax.

Ku-ring-gai Chase National Park
A map showing the location of the park on the east coast of Australia
A map showing the location of the park on the east coast of Australia
रहल स्थानNew South Wales, Australia
नजदिकक सहरSydney
निर्देशाङ्क३३°३९′३.६″द॰ १५१°१२′३.६″पू॰ / ३३.६५१०००°S १५१.२०१०००°E / -33.651000; 151.201000
क्षेत्रफल१५४ किमी (५९ वर्ग माइल)
स्थापनाअक्टुबर १, १९६७ (१९६७-१०-०१)
पर्यटक2 million (2001 मे)
सरकारी संस्थाNational Parks and Wildlife Service (New South Wales)
{{Infobox protected area
| name = Ku-ring-gai Chase National Park
| iucn_category = II
| map = Australia
| relief = yes
| map_width = 200
| map_alt = A map showing the location of the park on the east coast of Australia
| location = [[New South Wales]], Australia
| nearest_city = [[Sydney]]
| lat_d = 33 | lat_m = 39 | lat_s = 3.6 | lat_NS = S
| long_d = 151 | long_m = 12 | long_s = 3.6 | long_EW = E
| region = AU
| area = {{convert|154|km2|abbr=on}}
| established = {{start date|1967|10|1}}
| visitation_num = 2 million
| visitation_year = 2001
| governing_body = [[National Parks and Wildlife Service (New South Wales)]]
}}

With photograph only

[सम्पादन करी]
Yosemite National Park
Mountain valley with sheer cliff on its left side, and a waterfall cascading into its right, with a clear blue sky above and many green trees below
Yosemite Valley from Tunnel View
रहल स्थानCalifornia, United States
नजदिकक सहरMariposa
निर्देशाङ्क३७°४३′४४″उ॰ ११९°३५′५४″प॰ / ३७.७२८८९°N ११९.५९८३३°W / 37.72889; -119.59833
क्षेत्रफल७,६१,२६६ एकड (३,०८,०७३ हेक्ट)
स्थापनाअक्टुबर १, १८९० (१८९०-१०-०१)
पर्यटक3,280,911 (2004 मे)
सरकारी संस्थाNational Park Service
विश्व सम्पदा क्षेत्र1984
आधिकारिक वेबसाइट
{{Infobox protected area
| name = Yosemite National Park
| iucn_category = II
| photo = Tunnel View, Yosemite Valley, Yosemite NP - Diliff.jpg
| photo_alt = Mountain valley with sheer cliff on its left side, and a waterfall cascading into its right, with a clear blue sky above and many green trees below
| photo_caption = Yosemite Valley from Tunnel View
| location = [[California]], United States
| nearest_city = [[Mariposa, California|Mariposa]]
| lat_d = 37 | lat_m = 43 | lat_s = 44 | lat_NS = N 
| long_d = 119 | long_m = 35 | long_s = 54 | long_EW = W
| region = US-CA
| scale = 300000
| area = {{convert|761266|acres|0}}
| established = {{start date|1890|10|1}}
| visitation_num = 3,280,911
| visitation_year = 2004
| governing_body = [[National Park Service]]
| world_heritage_site = 1984
| url = http://www.nps.gov/yose/
}}

With no photograph or map

[सम्पादन करी]
Harz National Park
Nationalparkverwaltung Harz
रहल स्थानLower Saxony and Saxony-Anhalt, Germany
निर्देशाङ्क५१°४७′००″उ॰ १०°३४′००″पू॰ / ५१.७८३३३°N १०.५६६६७°E / 51.78333; 10.56667
क्षेत्रफल८,९०० हेक्टेयर (२१,९९२ एकड)
स्थापना1990, 1994, 2006
सरकारी संस्थाNationalparkverwaltung Harz
{{Infobox protected area
| name            = Harz National Park
| alt_name        = ''Nationalparkverwaltung Harz''
| iucn_category   = II
| location        = [[Lower Saxony]] and [[Saxony-Anhalt]], Germany
| nearest_city    = 
| coords          = {{coord|51|47|00|N|10|34|00|E|region:DE_type:landmark}}
| area            = {{convert|8900|ha}}
| established     = 1990, 1994, 2006
| visitation_num  = 
| visitation_year = 
| governing_body  = Nationalparkverwaltung Harz
}}

With photograph and map

[सम्पादन करी]
Dry Island Buffalo Jump Provincial Park
A green valley with a river and a road running somewhat parallel to the river
Panoramic view
Map of Alberta, Canada
रहल स्थानAlberta, Canada
नजदिकक सहरThree Hills
निर्देशाङ्क५१°५६′१०″उ॰ ११२°५७′४१″प॰ / ५१.९३६११°N ११२.९६१३९°W / 51.93611; -112.96139
क्षेत्रफल३४.५ किमी (१३ वर्ग माइल)
स्थापनादिसम्बर १५, १९७० (१९७०-१२-१५)
सरकारी संस्थाAlberta Tourism, Parks and Recreation
{{Infobox protected area
| name = Dry Island Buffalo Jump Provincial Park
| photo = Dry Island Provincial Park2.jpg
| photo_alt = A green valley with a river and a road running somewhat parallel to the river
| photo_caption = Panoramic view
| photo_width = 260
| iucn_category = III
| map = Canada Alberta
| map_alt = Location the park in south central Alberta, Canada
| map_caption = Map of Alberta, Canada
| relief = yes 
| map_width = 200
| location = [[Alberta]], Canada
| nearest_city = [[Three Hills, Alberta|Three Hills]]
| lat_d = 51 | lat_m = 56 | lat_s = 10 | lat_NS = N
| long_d = 112 | long_m = 57 | long_s = 41 | long_EW = W
| coords_ref = 
| region = CA
| area = {{convert|34.5|km2|0|abbr=on}}
| established = {{start date|1970|12|15}}
| governing_body = [[Alberta Tourism, Parks and Recreation]]
}}

With embedded alternate map

[सम्पादन करी]
Black Forest National Park
{{{base_caption}}}
Location of the Black Forest National Park in the northwestern Black Forest
रहल स्थानBaden-Württemberg, Germany
निर्देशाङ्क४८°३३′४०″उ॰ ८°१३′१७″पू॰ / ४८.५६१११°N ८.२२१३९°E / 48.56111; 8.22139
Infobox protected area/doc Germanyपर अवस्थित
Infobox protected area/doc
Black Forest National Park in the southwest of the map
{{Infobox protected area
| name = Black Forest National Park
| iucn_category = II
| map = Nationalpark-Schwarzwald-Lageplan.png
| map_alt = 
| map_caption = Location of the Black Forest National Park in the northwestern Black Forest
| map_width = 
| relief =
| location = [[Baden-Württemberg]], Germany
| lat_d = 48 | lat_m = 33 | lat_s = 40 | lat_NS = N
| long_d = 8 | long_m = 13 | long_s = 17 | long_EW = E
| region = DE-BW
| embedded = {{Location map | Germany
 | AlternativeMap = Karte Nationalparks Deutschland high.png
 | caption = Black Forest National Park in the southwest of the map
 | lat_deg = 48 | lat_min = 33 | lat_sec = 40 | lat_dir = N
 | lon_deg = 8 | lon_min = 13 | lon_sec = 17 | lon_dir = E
 | border = none
 | width = 300
 }}
}}

Map display methods

[सम्पादन करी]

Any image of a map showing the location of the protected area can be used. There are three methods by which maps showing a marker can be generated. आकृति:Infobox map/Map display methods

कोई विवरण नहीं।

साँचे के पैरामीटर्स

पैरामीटरविवरणप्रकारस्थिति
nameName

Name of protected area

स्ट्रिंगआवश्यक
alt_nameAlternative Name

Common name for the protected area

स्ट्रिंगवैकल्पिक
iucn_categoryIUCN Category

IUCN Category associated with the protected area

स्ट्रिंगवैकल्पिक
photoPhoto

Image for the protected area

पृष्ठ का नामवैकल्पिक
photo_widthPhoto Width

Width of the image given by photo

संख्यावैकल्पिक
photo_altPhoto Alternative Text

Alternative text to be displayed if image doesn't appear for any reason

स्ट्रिंगवैकल्पिक
photo_captionPhoto Caption

Caption for the photo

स्ट्रिंगवैकल्पिक
mapMap

Map for the protected area

पृष्ठ का नामवैकल्पिक
map_altMap Alternative Text

Alternative text to display if the map doesn't display for whatever reasons

स्ट्रिंगवैकल्पिक
map_captionMap Caption

Caption for the map

स्ट्रिंगवैकल्पिक
map_widthMap Width

Width of the map

संख्यावैकल्पिक
reliefRelief

When the geographical coordinates method is used, any non-blank value will cause the template to display a relief map image

स्ट्रिंगवैकल्पिक
locationLocation

Location of the protected area

स्ट्रिंगवैकल्पिक
nearest_cityNearest City

Nearest city from the protected area

स्ट्रिंगवैकल्पिक
lat_dLatitude(Degrees)

Degrees of latitude of protected area

संख्यावैकल्पिक
lat_mLatitude(Minutes)

Minutes of latitude of protected area

संख्यावैकल्पिक
lat_sLatitude(Seconds)

Seconds of latitude of protected area

संख्यावैकल्पिक
lat_NSLatitude(North/South)

N if protected area is north of equator, S if protected area is south of equator

स्ट्रिंगवैकल्पिक
long_dLongitude(Degrees)

Degrees of longitude of protected area

संख्यावैकल्पिक
long_mLongitude(Minutes)

Minutes of longitude of protected area

संख्यावैकल्पिक
long_sLongitude(Seconds)

Seconds of longitude of protected area

संख्यावैकल्पिक
long_EWLongitude(East/West)

E if protected area is East of the prime meridian, W if protected area is west of the prime meridian

स्ट्रिंगवैकल्पिक
coordsCoordinates

When this option is used the type, region, scale, source, format and display parameters are not functional but this data can be entered in the {{Coord}} template.

डिफ़ॉल्ट
type:landmark display:inline,title
स्ट्रिंगवैकल्पिक
coords_refCoordinates Reference

Can be used with either coordinate display method above

स्ट्रिंगवैकल्पिक
typeType

Type is one way to specify the scale of maps generated by external map websites

डिफ़ॉल्ट
landmark
स्ट्रिंगवैकल्पिक
scaleScale

Determines the zoom factor for external map websites.

स्ट्रिंगवैकल्पिक
regionRegion

Country code in which the protected area is located

स्ट्रिंगवैकल्पिक
sourceSource

Source of the coordinate data of the protected area

स्ट्रिंगवैकल्पिक
formatFormat

dms for degrees, minutes and seconds, and dec for decimal degrees

डिफ़ॉल्ट
dms
स्ट्रिंगवैकल्पिक
areaArea

Area Covered by protected area

संख्यावैकल्पिक
displayDisplay

Determines where the coordinates will be displayed

डिफ़ॉल्ट
inline,title
स्ट्रिंगवैकल्पिक
establishedEstablished

The date on which the protected area was created

पंक्तिवैकल्पिक
visitation_numVisitation Number

Number of visitors in a recent year

पंक्तिवैकल्पिक
visitation_yearVisitation Year

The year in which visitors were counted

पंक्तिवैकल्पिक
visitation_refVisitation Reference

Reference of visitation data in <ref > </ref>

स्ट्रिंगवैकल्पिक
governing_bodyGoverning Body

The agency or organization which controls or owns the protected area

स्ट्रिंगवैकल्पिक
world_heritage_siteWorld Heritage Site

The year the protected area was designated a World Heritage Site

पंक्तिवैकल्पिक
urlUrl

The full URL of the official website with no formatting

स्ट्रिंगवैकल्पिक
childChild

Yes if infobox is embedded inside another infobox

स्ट्रिंगवैकल्पिक
embeddedEmbedded

Another infobox to place within this infobox

स्ट्रिंगवैकल्पिक

The articles created using this template include an hCard microformat. For more information read this.