Scribd
Upload
3K views4 pages

Tutorial Renault Pin Extractor PDF

To retrieve a pin code for a vehicle, one must first find the RESERVE command in the MUCH or Kill systems on Borneos 1-3, enter code 5938 to validate, then retrieve the 6-byte ISK code between bytes 18-23 (or 24 for longer pins). This ISK code is entered into a Pin Extractor tool to calculate the pin code, which is then used along with the vehicle serial number and Outcode from the video to obtain the Incode needed for programming the immobilizer key chip.

Uploaded by

Silviu Lungu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
3K views4 pages

Tutorial Renault Pin Extractor PDF

To retrieve a pin code for a vehicle, one must first find the RESERVE command in the MUCH or Kill systems on Borneos 1-3, enter code 5938 to validate, then retrieve the 6-byte ISK code between bytes 18-23 (or 24 for longer pins). This ISK code is entered into a Pin Extractor tool to calculate the pin code, which is then used along with the vehicle serial number and Outcode from the video to obtain the Incode needed for programming the immobilizer key chip.

Uploaded by

Silviu Lungu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
  • Introduction: Introduces the RENAULT CLiP tool and highlights the initial steps needed to find the RESERVE command for vehicle code recovery.
  • ISK Code Entry: Explains how to enter a code with details on entering and validating the ISK code for different vehicles.
  • Pin Code Recovery: Provides instructions for recovering pin codes and the in-code necessary through examples and software interfaces for the Renault tool.

He must first find RESERVE command found in either

MUCH for vehicles on Borneo 2 and 3, or in Kill


operated vehicles Borneo 1
(type 2 clio for ex.)
After you find a command Clip, it will ask you a code to enter,
code:5938 and validate. You will come across this kind of page,
which can differ depending on the car.

The ISK code is byte 18 to 23


for vh with pin code has 12
characters. For pin codes to
14 characters to be taken
byte 24 more.
Once the ISK code retrieved, it will allow us to Then we need to recover the Incode requested by
calculate the pin code with Pin Extractor: the video when learning a card:

Outcode

Incode

You choose the type of vh

You get the pin code

You enter the code ISK

You go by the given Outcode Clip


The serial number of the car

Put Pin code retrieved earlier And one obtains Incode


that can go into Clip
Good Cliping!
By @obdstart

You might also like