IP Camera CMS User manual (IOS Version) 1
JIENU
IP Camera CMS User Manual (IOS Version)
IP Camera CMS User manual (IOS Version) 2
Content
1. Software description........................................................................................................................ 3
2. One key to configure WIFI............................................................................................................. 3
3. Add Camera..................................................................................................................................... 4
3.1. LAN Search.......................................................................................................................... 4
3.2. Scan barcode.........................................................................................................................4
4. Delete Camera.................................................................................................................... ............. 4
5. View the video............................................................................................................................. .... 5
6. Video Interface illustration.............................................................................................................. 5
7. Camera parameters.......................................................................................................................... 6
7.1. Change password................................................................................................................. .6
7.2. Motion Detection Alarm setting...........................................................................................6
7.3. Alarm Linkage......................................................................................................................7
7.4. Timing record....................................................................................................................... 7
7.5. Audio Setting....................................................................................................................... .8
7.6. Video settings.................................................................................................................. ..... 8
7.7. SD Card setting.................................................................................................................... 9
7.8. Device time setting............................................................................................................... 9
7.9. Email Setting........................................................................................................................ 9
7.10. FTP Setting....................................................................................................................... 10
7.11. Device information...........................................................................................................10
8. Other settings............................................................................................................................. .... 11
9. Local pictures......................................................................................................... ....................... 11
10. Video............................................................................................................................. ...............12
10.1. Local video...................................................................................................................... 12
10.2. Video playback................................................................................................................ 12
10.2.1. Local Video playback............................................................................................12
10.2.2. Online video playback...........................................................................................12
IP Camera CMS User manual (IOS Version) 3
1. Software description
HICHIP IP Camera CMS (IOS Version) is a kind of tool to manage network
cameras, can be realized to monitor network camera images and other functions
in LAN and Internet on IOS system. It supports search to add ID and manually
enter camera IP in LAN; support one key to configure WIFI, add device, delete
and edit function; support audio monitoring and intercom; support snap photos
to mobile phone; support image quality level Settings, and other functions.
First connect the camera power supply, after about 40s, will hear a prompt
sound, if not heard, please press the RESET button in the equipment base for 10s.
Note: 1. Please use the camera self-contained power adapter, so as to
avoid damage the device
2. Please do not insert net cable before power on;(If done, one key to
configure WIFI will not work)
2. One key to configure WIFI
After install mobile app, mobile phone connected to WIFI, click add camera –
one key configure WIFI -- input WIFI password -- popup weather hear the
camera hint sound, choice yes, system will configure WIFI himself; when WIFI
configure successfully, it will have hint sound.
IP Camera CMS User manual (IOS Version) 4
3. Add Camera
3.1. LAN Search
Click to add camera, enter into add camera interface, type in
camera UID :
1. Search: click LAN Search button, search the network camera in the mobile
phone wireless network; Select the UID
2. Enter the camera password(default password is admin).
3. Click Finish on the upper right corner.
3.2. Scan barcode
Through QR code generation tool to generate QR code using this UID, and then
through mobile phone APP to scan the bar code to add
4. Delete Camera
Click Edit, click ，will prompt whether delete camera, click YES
IP Camera CMS User manual (IOS Version) 5
5. View the video
After add the camera for a few seconds , waiting the camera connected
automatically, when prompt online instructions, it means can view the camera
video:
Camera status illustration:
Connecting: Now the camera is connecting with network, according to
different network, it costs different time
Online: means the device connected normally, click to view videos
6. Video Interface illustration
：Monitoring off;
：Monitoring on;
：when monitoring icon turns to ，press to realize intercom（You can not
loosen the icon , press it for long time, if loosen, intercom will turn off）
： click this icon, it will snap photos to mobile phone (The photos save to Snapshot file
folder in mobile phone)
：Local Record off
IP Camera CMS User manual (IOS Version) 6
：Local Record on
：click this icon, can choose resolution type: HD or smooth
HD: It is connected to first stream
smooth: It is connected to second stream
7. Camera parameters
When camera online, click , enter into the interface of camera parameter setting
7.1. Change password
can change the access password of camera (only can change administrator password)
7.2. Motion Detection Alarm setting
Open Motion detection: motion detection on or off
IP Camera CMS User manual (IOS Version) 7
Motion detection sensitivity:
High, medium and low can be set; High: the sensitivity value is 75; medium
sensitivity value is 50: low sensitivity value is 25
7.3. Alarm Linkage
Alarm Push
Click ON,open alarm Push;
SD Card record while alarm
Choose on, means the alarm video will save to SD
Card
Email alarm and send pictures
Choose on, means it will send pictures to specified
mailbox when alarm
save pictures to FTP Server
Choose on, mean it will save alarm pictures to
specified FTP server
save videos to FTP server
Choose on, means alarm videos save to specified
FTP server
7.4. Timing record
Video file length: 15-900seconds can be set,
default is 600seconds
whether video on: on off can be set, default is off
IP Camera CMS User manual (IOS Version) 8
7.5. Audio Setting
Input type
Linear input and microphone input can be
set
when audio input type is microphone
input, the input volume and output volume is 80
and 95;
when audio input type is linear input, the
input volume and output volume is 15 and 95;
7.6. Video settings
code rate
The device code rate of first stream and
second stream can be self-define; scope range
32kbps-6144kbps
frame rate
The device frame rate of first stream and second
stream can be self-defined;
Video coding level
1-6 can be set, default is 1; the smaller the value,
the better the image level, the big the stream
Video system
50HZ and 60HZ can be set
IP Camera CMS User manual (IOS Version) 9
7.7. SD Card setting
Can obtain the total space of the SD card and the size of the available space, can
format SD card
7.8. Device time setting
1. The device time can synchronization mobile phone time
2. can set device time zone, after setting successfully, the device will restart
7.9. Email Setting
Eg: sending mailbox is hotmail mailbox
Smtp server：smtp.live.com
Server port：465
Secure connection：SSL
user name and password is hotmail account and
password
Receive address ：the mailbox that receive alarm
pictures
Send address: sender’s mailbox address, if it is
QQ mailbox, need to fill the hotmail mailbox
address (the same as user name)
Theme and information can be filled in casually
After completed, click Apply; then click test to
know whether can send alarm email
IP Camera CMS User manual (IOS Version) 10
7.10. FTP Setting
FTP server： fill in the FTP address
Server port：fill in FTP port；
fill in the user name and password setted on
FTP server
after completed, click Apply; then click test
to know whether can send pictures to FTP
server
7.11. Device information
can obtain device information: including network status, user connection number, IP
address, Subnet mask, gateway, DNS and so on
IP Camera CMS User manual (IOS Version) 11
8. Other settings
Mirror and Flip
click, can set Mirror and Flip
Lens zoom
click , can set the lens zoom in, zoom out,
focus add, focus reduction and other operations
Note: This function need the lens supporting
zoom
Preset settings and calls
click , can set presets and call presets;
Note: This function need the device
supporting PTZ
9. Local pictures
click , enter into playback interface
1. Local pictures are saved by ID
2. Long press one picture can delete it
IP Camera CMS User manual (IOS Version) 12
10. Video
10.1. Local video
:Click the icon, the icon is red ;In the video icon appears on the right
side, ;
10.2. Video playback
10.2.1. Local Video playback
Click on the video icon, into the video playback interface, select local, click to
play back the video equipment;Then pops out video list, click on the video playback;
10.2.2. Online video playback
click , enter into watching interface
Can playback the videos in SD Card, including
timing video and alarm video
